From 0eece2b22849c90b730815c893425a36b9d10fd5 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 16 Nov 2015 19:13:26 +0000 Subject: irqchip/gic: Make sure all interrupts are deactivated at boot When booting a GIC/GICv3 based system, we have no idea what state the firmware (or previous kernel in the case of kexec) has left the GIC, and some interrupts may still be active. In order to garantee that we have a clean state, make sure the active bits are cleared at init time. Signed-off-by: Marc Zyngier Cc: Cc: Jason Cooper Cc: Russell King Link: http://lkml.kernel.org/r/1447701208-18150-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic-common.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c index 44a077f3a4a2..f174ce0ca361 100644 --- a/drivers/irqchip/irq-gic-common.c +++ b/drivers/irqchip/irq-gic-common.c @@ -84,12 +84,15 @@ void __init gic_dist_config(void __iomem *base, int gic_irqs, writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i); /* - * Disable all interrupts. Leave the PPI and SGIs alone - * as they are enabled by redistributor registers. + * Deactivate and disable all SPIs. Leave the PPI and SGIs + * alone as they are in the redistributor registers on GICv3. */ - for (i = 32; i < gic_irqs; i += 32) + for (i = 32; i < gic_irqs; i += 32) { writel_relaxed(GICD_INT_EN_CLR_X32, - base + GIC_DIST_ENABLE_CLEAR + i / 8); + base + GIC_DIST_ACTIVE_CLEAR + i / 8); + writel_relaxed(GICD_INT_EN_CLR_X32, + base + GIC_DIST_ENABLE_CLEAR + i / 8); + } if (sync_access) sync_access(); @@ -102,7 +105,9 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void)) /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. + * Make sure everything is deactivated. */ + writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR); writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR); writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET); -- cgit v1.2.3 From 92eda4ad4371225d6ccf9cded74315547e9a3153 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 16 Nov 2015 19:13:27 +0000 Subject: irqchip/gic: Clear enable bits before restoring them When restoring the GIC state (after a suspend/resume cycle, for example), the driver directly writes the 'enabled' state it has saved by accessing GICD_ISENABLERn, which performs an OR operation between the value present in the register and the value we write. If whatever code that has run before we reentered the kernel has enabled an interrupt that was previously disabled, we won't restore that disabled state. Making sure we first clear the register (by writting to GICD_ICENABLERn) before restoring the enabled state. Signed-off-by: Marc Zyngier Cc: Cc: Jason Cooper Cc: Russell King Link: http://lkml.kernel.org/r/1447701208-18150-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 515c823c1c95..bc846e7fec44 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -604,9 +604,12 @@ static void gic_dist_restore(unsigned int gic_nr) writel_relaxed(gic_data[gic_nr].saved_spi_target[i], dist_base + GIC_DIST_TARGET + i * 4); - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) { + writel_relaxed(GICD_INT_EN_CLR_X32, + dist_base + GIC_DIST_ENABLE_CLEAR + i * 4); writel_relaxed(gic_data[gic_nr].saved_spi_enable[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); + } writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL); } @@ -654,8 +657,11 @@ static void gic_cpu_restore(unsigned int gic_nr) return; ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); - for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) { + writel_relaxed(GICD_INT_EN_CLR_X32, + dist_base + GIC_DIST_ENABLE_CLEAR + i * 4); writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); + } ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); for (i = 0; i < DIV_ROUND_UP(32, 16); i++) -- cgit v1.2.3 From 1c7d4dd46ee048afe19e1294634df6fa66862519 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 16 Nov 2015 19:13:28 +0000 Subject: irqchip/gic: Add save/restore of the active state When using EOImode==1, we may mark interrupts as being forwarded to a virtual machine. In that case, the interrupt is left active while being passed to the VM. If we suspend the system before the VM has deactivated the interrupt, the active state will be lost (which may be very annoying, as this may result in spurious interrupts and a confused guest). To avoid this, save and restore the active state together with the rest of the GIC registers. Signed-off-by: Marc Zyngier Cc: Cc: Jason Cooper Cc: Russell King Link: http://lkml.kernel.org/r/1447701208-18150-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index bc846e7fec44..abf2ffaed392 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -73,9 +73,11 @@ struct gic_chip_data { union gic_base cpu_base; #ifdef CONFIG_CPU_PM u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_active[DIV_ROUND_UP(1020, 32)]; u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_active; u32 __percpu *saved_ppi_conf; #endif struct irq_domain *domain; @@ -566,6 +568,10 @@ static void gic_dist_save(unsigned int gic_nr) for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) gic_data[gic_nr].saved_spi_enable[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + gic_data[gic_nr].saved_spi_active[i] = + readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4); } /* @@ -611,6 +617,13 @@ static void gic_dist_restore(unsigned int gic_nr) dist_base + GIC_DIST_ENABLE_SET + i * 4); } + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) { + writel_relaxed(GICD_INT_EN_CLR_X32, + dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4); + writel_relaxed(gic_data[gic_nr].saved_spi_active[i], + dist_base + GIC_DIST_ACTIVE_SET + i * 4); + } + writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL); } @@ -634,6 +647,10 @@ static void gic_cpu_save(unsigned int gic_nr) for (i = 0; i < DIV_ROUND_UP(32, 32); i++) ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4); + ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); for (i = 0; i < DIV_ROUND_UP(32, 16); i++) ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); @@ -663,6 +680,13 @@ static void gic_cpu_restore(unsigned int gic_nr) writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); } + ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) { + writel_relaxed(GICD_INT_EN_CLR_X32, + dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4); + writel_relaxed(ptr[i], dist_base + GIC_DIST_ACTIVE_SET + i * 4); + } + ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); for (i = 0; i < DIV_ROUND_UP(32, 16); i++) writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4); @@ -716,6 +740,10 @@ static void __init gic_pm_init(struct gic_chip_data *gic) sizeof(u32)); BUG_ON(!gic->saved_ppi_enable); + gic->saved_ppi_active = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_active); + gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4, sizeof(u32)); BUG_ON(!gic->saved_ppi_conf); -- cgit v1.2.3