From 83ef106fa732aea8558253641cd98e8a895604d7 Mon Sep 17 00:00:00 2001 From: Viken Dadhaniya Date: Mon, 12 Feb 2024 18:22:39 +0530 Subject: i2c: qcom-geni: Correct I2C TRE sequence For i2c read operation in GSI mode, we are getting timeout due to malformed TRE basically incorrect TRE sequence in gpi(drivers/dma/qcom/gpi.c) driver. I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function i.e. geni_i2c_gpi_xfer(). TRE stands for Transfer Ring Element - which is basically an element with size of 4 words. It contains all information like slave address, clk divider, dma address value data size etc). Mainly we have 3 TREs(Config, GO and DMA tre). - CONFIG TRE : consists of internal register configuration which is required before start of the transfer. - DMA TRE : contains DDR/Memory address, called as DMA descriptor. - GO TRE : contains Transfer directions, slave ID, Delay flags, Length of the transfer. I2c driver calls GPI driver API to config each TRE depending on the protocol. For read operation tre sequence will be as below which is not aligned to hardware programming guide. - CONFIG tre - DMA tre - GO tre As per Qualcomm's internal Hardware Programming Guide, we should configure TREs in below sequence for any RX only transfer. - CONFIG tre - GO tre - DMA tre Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Reviewed-by: Andi Shyti Reviewed-by: Bryan O'Donoghue Tested-by: Bryan O'Donoghue # qrb5165-rb5 Co-developed-by: Mukesh Kumar Savaliya Signed-off-by: Mukesh Kumar Savaliya Signed-off-by: Viken Dadhaniya Reviewed-by: Dmitry Baryshkov Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-qcom-geni.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 0d2e7171e3a6..da94df466e83 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -613,20 +613,20 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i peripheral.addr = msgs[i].addr; + ret = geni_i2c_gpi(gi2c, &msgs[i], &config, + &tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c); + if (ret) + goto err; + if (msgs[i].flags & I2C_M_RD) { ret = geni_i2c_gpi(gi2c, &msgs[i], &config, &rx_addr, &rx_buf, I2C_READ, gi2c->rx_c); if (ret) goto err; - } - - ret = geni_i2c_gpi(gi2c, &msgs[i], &config, - &tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c); - if (ret) - goto err; - if (msgs[i].flags & I2C_M_RD) dma_async_issue_pending(gi2c->rx_c); + } + dma_async_issue_pending(gi2c->tx_c); timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT); -- cgit v1.2.3 From f44bff19268517ee98e80e944cad0f04f1db72e3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 12 Feb 2024 12:19:04 +0100 Subject: i2c: pasemi: split driver into two separate modules On powerpc, it is possible to compile test both the new apple (arm) and old pasemi (powerpc) drivers for the i2c hardware at the same time, which leads to a warning about linking the same object file twice: scripts/Makefile.build:244: drivers/i2c/busses/Makefile: i2c-pasemi-core.o is added to multiple modules: i2c-apple i2c-pasemi Rework the driver to have an explicit helper module, letting Kbuild take care of whether this should be built-in or a loadable driver. Fixes: 9bc5f4f660ff ("i2c: pasemi: Split pci driver to its own file") Signed-off-by: Arnd Bergmann Reviewed-by: Sven Peter Signed-off-by: Andi Shyti --- drivers/i2c/busses/Makefile | 6 ++---- drivers/i2c/busses/i2c-pasemi-core.c | 6 ++++++ 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 3757b9391e60..aa0ee8ecd6f2 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -90,10 +90,8 @@ obj-$(CONFIG_I2C_NPCM) += i2c-npcm7xx.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_OWL) += i2c-owl.o -i2c-pasemi-objs := i2c-pasemi-core.o i2c-pasemi-pci.o -obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o -i2c-apple-objs := i2c-pasemi-core.o i2c-pasemi-platform.o -obj-$(CONFIG_I2C_APPLE) += i2c-apple.o +obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi-core.o i2c-pasemi-pci.o +obj-$(CONFIG_I2C_APPLE) += i2c-pasemi-core.o i2c-pasemi-platform.o obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c index 7d54a9f34c74..bd8becbdeeb2 100644 --- a/drivers/i2c/busses/i2c-pasemi-core.c +++ b/drivers/i2c/busses/i2c-pasemi-core.c @@ -369,6 +369,7 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus) return 0; } +EXPORT_SYMBOL_GPL(pasemi_i2c_common_probe); irqreturn_t pasemi_irq_handler(int irq, void *dev_id) { @@ -378,3 +379,8 @@ irqreturn_t pasemi_irq_handler(int irq, void *dev_id) complete(&smbus->irq_completion); return IRQ_HANDLED; } +EXPORT_SYMBOL_GPL(pasemi_irq_handler); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Olof Johansson "); +MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); -- cgit v1.2.3 From c1c9d0f6f7f1dbf29db996bd8e166242843a5f21 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 14 Feb 2024 15:59:39 +0100 Subject: i2c: i801: Fix block process call transactions According to the Intel datasheets, software must reset the block buffer index twice for block process call transactions: once before writing the outgoing data to the buffer, and once again before reading the incoming data from the buffer. The driver is currently missing the second reset, causing the wrong portion of the block buffer to be read. Signed-off-by: Jean Delvare Reported-by: Piotr Zakowski Closes: https://lore.kernel.org/linux-i2c/20240213120553.7b0ab120@endymion.delvare/ Fixes: 315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call support") Reviewed-by: Alexander Sverdlin Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-i801.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 3932e8d96a17..2c36b36d7d51 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -498,11 +498,10 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, /* Set block buffer mode */ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); - inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ - if (read_write == I2C_SMBUS_WRITE) { len = data->block[0]; outb_p(len, SMBHSTDAT0(priv)); + inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ for (i = 0; i < len; i++) outb_p(data->block[i+1], SMBBLKDAT(priv)); } @@ -520,6 +519,7 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, } data->block[0] = len; + inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ for (i = 0; i < len; i++) data->block[i + 1] = inb_p(SMBBLKDAT(priv)); } -- cgit v1.2.3