From 6ded7cd605502eff7341bbd912ebc90c3674c764 Mon Sep 17 00:00:00 2001 From: trem Date: Tue, 4 Dec 2012 08:52:10 +0000 Subject: net: phy: smsc: force all capable mode if the phy is started in powerdown mode A SMSC PHY in power down mode can't be used. If a SMSC PHY is in this mode in the config_init stage, the mode "all capable" is set. So the PHY could then be used. Signed-off-by: Philippe Reynes Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 16dceed29d8c..ef883e3048c0 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -43,7 +43,31 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev) static int smsc_phy_config_init(struct phy_device *phydev) { - int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES); + if (rc < 0) + return rc; + + /* If the SMSC PHY is in power down mode, then set it + * in all capable mode before using it. + */ + if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { + int timeout = 50000; + + /* set "all capable" mode and reset the phy */ + rc |= MII_LAN83C185_MODE_ALL; + phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); + phy_write(phydev, MII_BMCR, BMCR_RESET); + + /* wait end of reset (max 500 ms) */ + do { + udelay(10); + if (timeout-- == 0) + return -1; + rc = phy_read(phydev, MII_BMCR); + } while (rc & BMCR_RESET); + } + + rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); if (rc < 0) return rc; -- cgit v1.2.3