From 63eeaf38251183ec2b1caee11e4a2c040cb5ce6c Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu, 18 Jun 2009 16:56:52 -0700
Subject: drm/i915: enable error detection & state collection

This patch enables error detection by enabling several types of error
interrupts.  When an error interrupt is received, the interrupt
handler captures the error state; hopefully resulting in an accurate
set of error data (error type, active head pointer, etc.).  The new
record is then available from sysfs.  The current code will also dump
the error state to the system log.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c         |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |  19 +++++
 drivers/gpu/drm/i915/i915_gem_debugfs.c |  34 ++++++++
 drivers/gpu/drm/i915/i915_irq.c         | 139 +++++++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h         |  14 ++++
 5 files changed, 204 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f112c769d533..f83364974a8a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1180,6 +1180,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		pci_enable_msi(dev->pdev);
 
 	spin_lock_init(&dev_priv->user_irq_lock);
+	spin_lock_init(&dev_priv->error_lock);
 	dev_priv->user_irq_refcount = 0;
 
 	ret = drm_vblank_init(dev, I915_NUM_PIPE);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index bb4c2d387b6c..596e119d3e0e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -133,6 +133,22 @@ struct sdvo_device_mapping {
 	u8 initialized;
 };
 
+struct drm_i915_error_state {
+	u32 eir;
+	u32 pgtbl_er;
+	u32 pipeastat;
+	u32 pipebstat;
+	u32 ipeir;
+	u32 ipehr;
+	u32 instdone;
+	u32 acthd;
+	u32 instpm;
+	u32 instps;
+	u32 instdone1;
+	u32 seqno;
+	struct timeval time;
+};
+
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
@@ -209,6 +225,9 @@ typedef struct drm_i915_private {
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
+	spinlock_t error_lock;
+	struct drm_i915_error_state *first_error;
+
 	/* Register state */
 	u8 saveLBB;
 	u32 saveDSPACNTR;
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index 28146e405e87..cacae945338b 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -323,6 +323,39 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
 	return 0;
 }
 
+static int i915_error_state(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	if (!dev_priv->first_error) {
+		seq_printf(m, "no error state collected\n");
+		goto out;
+	}
+
+	error = dev_priv->first_error;
+
+	seq_printf(m, "EIR: 0x%08x\n", error->eir);
+	seq_printf(m, "  PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+	seq_printf(m, "  INSTPM: 0x%08x\n", error->instpm);
+	seq_printf(m, "  IPEIR: 0x%08x\n", error->ipeir);
+	seq_printf(m, "  IPEHR: 0x%08x\n", error->ipehr);
+	seq_printf(m, "  INSTDONE: 0x%08x\n", error->instdone);
+	seq_printf(m, "  ACTHD: 0x%08x\n", error->acthd);
+	if (IS_I965G(dev)) {
+		seq_printf(m, "  INSTPS: 0x%08x\n", error->instps);
+		seq_printf(m, "  INSTDONE1: 0x%08x\n", error->instdone1);
+	}
+
+out:
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+	return 0;
+}
 
 static struct drm_info_list i915_gem_debugfs_list[] = {
 	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
@@ -336,6 +369,7 @@ static struct drm_info_list i915_gem_debugfs_list[] = {
 	{"i915_ringbuffer_data", i915_ringbuffer_data, 0},
 	{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
 	{"i915_batchbuffers", i915_batchbuffer_info, 0},
+	{"i915_error_state", i915_error_state, 0},
 };
 #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 228546f6eaa4..17b308592c4f 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -26,6 +26,7 @@
  *
  */
 
+#include <linux/sysrq.h>
 #include "drmP.h"
 #include "drm.h"
 #include "i915_drm.h"
@@ -41,9 +42,10 @@
  * we leave them always unmasked in IMR and then control enabling them through
  * PIPESTAT alone.
  */
-#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
-				   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |  \
-				   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT |		 \
+				   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+				   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \
+				   I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
 
 /** Interrupts that we mask and unmask at runtime. */
 #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
@@ -288,6 +290,47 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev)
 	return ret;
 }
 
+static void i915_capture_error_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	if (dev_priv->first_error)
+		goto out;
+
+	error = kmalloc(sizeof(*error), GFP_ATOMIC);
+	if (!error) {
+		DRM_DEBUG("out ot memory, not capturing error state\n");
+		goto out;
+	}
+
+	error->eir = I915_READ(EIR);
+	error->pgtbl_er = I915_READ(PGTBL_ER);
+	error->pipeastat = I915_READ(PIPEASTAT);
+	error->pipebstat = I915_READ(PIPEBSTAT);
+	error->instpm = I915_READ(INSTPM);
+	if (!IS_I965G(dev)) {
+		error->ipeir = I915_READ(IPEIR);
+		error->ipehr = I915_READ(IPEHR);
+		error->instdone = I915_READ(INSTDONE);
+		error->acthd = I915_READ(ACTHD);
+	} else {
+		error->ipeir = I915_READ(IPEIR_I965);
+		error->ipehr = I915_READ(IPEHR_I965);
+		error->instdone = I915_READ(INSTDONE_I965);
+		error->instps = I915_READ(INSTPS);
+		error->instdone1 = I915_READ(INSTDONE1);
+		error->acthd = I915_READ(ACTHD_I965);
+	}
+
+	dev_priv->first_error = error;
+
+out:
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+}
+
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -362,6 +405,80 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 			I915_READ(PORT_HOTPLUG_STAT);
 		}
 
+		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) {
+			u32 eir = I915_READ(EIR);
+
+			i915_capture_error_state(dev);
+
+			printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+			       eir);
+			if (eir & I915_ERROR_PAGE_TABLE) {
+				u32 pgtbl_err = I915_READ(PGTBL_ER);
+				printk(KERN_ERR "page table error\n");
+				printk(KERN_ERR "  PGTBL_ER: 0x%08x\n",
+				       pgtbl_err);
+				I915_WRITE(PGTBL_ER, pgtbl_err);
+				(void)I915_READ(PGTBL_ER);
+			}
+			if (eir & I915_ERROR_MEMORY_REFRESH) {
+				printk(KERN_ERR "memory refresh error\n");
+				printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
+				       pipea_stats);
+				printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
+				       pipeb_stats);
+				/* pipestat has already been acked */
+			}
+			if (eir & I915_ERROR_INSTRUCTION) {
+				printk(KERN_ERR "instruction error\n");
+				printk(KERN_ERR "  INSTPM: 0x%08x\n",
+				       I915_READ(INSTPM));
+				if (!IS_I965G(dev)) {
+					u32 ipeir = I915_READ(IPEIR);
+
+					printk(KERN_ERR "  IPEIR: 0x%08x\n",
+					       I915_READ(IPEIR));
+					printk(KERN_ERR "  IPEHR: 0x%08x\n",
+						   I915_READ(IPEHR));
+					printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+						   I915_READ(INSTDONE));
+					printk(KERN_ERR "  ACTHD: 0x%08x\n",
+						   I915_READ(ACTHD));
+					I915_WRITE(IPEIR, ipeir);
+					(void)I915_READ(IPEIR);
+				} else {
+					u32 ipeir = I915_READ(IPEIR_I965);
+
+					printk(KERN_ERR "  IPEIR: 0x%08x\n",
+					       I915_READ(IPEIR_I965));
+					printk(KERN_ERR "  IPEHR: 0x%08x\n",
+					       I915_READ(IPEHR_I965));
+					printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+					       I915_READ(INSTDONE_I965));
+					printk(KERN_ERR "  INSTPS: 0x%08x\n",
+					       I915_READ(INSTPS));
+					printk(KERN_ERR "  INSTDONE1: 0x%08x\n",
+					       I915_READ(INSTDONE1));
+					printk(KERN_ERR "  ACTHD: 0x%08x\n",
+					       I915_READ(ACTHD_I965));
+					I915_WRITE(IPEIR_I965, ipeir);
+					(void)I915_READ(IPEIR_I965);
+				}
+			}
+
+			I915_WRITE(EIR, eir);
+			(void)I915_READ(EIR);
+			eir = I915_READ(EIR);
+			if (eir) {
+				/*
+				 * some errors might have become stuck,
+				 * mask them.
+				 */
+				DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+				I915_WRITE(EMR, I915_READ(EMR) | eir);
+				I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+			}
+		}
+
 		I915_WRITE(IIR, iir);
 		new_iir = I915_READ(IIR); /* Flush posted writes */
 
@@ -732,6 +849,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
+	u32 error_mask;
 
 	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
 
@@ -768,6 +886,21 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 		i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
 	}
 
+	/*
+	 * Enable some error detection, note the instruction error mask
+	 * bit is reserved, so we leave it masked.
+	 */
+	if (IS_G4X(dev)) {
+		error_mask = ~(GM45_ERROR_PAGE_TABLE |
+			       GM45_ERROR_MEM_PRIV |
+			       GM45_ERROR_CP_PRIV |
+			       I915_ERROR_MEMORY_REFRESH);
+	} else {
+		error_mask = ~(I915_ERROR_PAGE_TABLE |
+			       I915_ERROR_MEMORY_REFRESH);
+	}
+	I915_WRITE(EMR, error_mask);
+
 	/* Disable pipe interrupt enables, clear pending pipe status */
 	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
 	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 88bf7521405f..ad3d1b5db95e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -206,6 +206,7 @@
 /*
  * Instruction and interrupt control regs
  */
+#define PGTBL_ER	0x02024
 #define PRB0_TAIL	0x02030
 #define PRB0_HEAD	0x02034
 #define PRB0_START	0x02038
@@ -226,11 +227,18 @@
 #define PRB1_HEAD	0x02044 /* 915+ only */
 #define PRB1_START	0x02048 /* 915+ only */
 #define PRB1_CTL	0x0204c /* 915+ only */
+#define IPEIR_I965	0x02064
+#define IPEHR_I965	0x02068
+#define INSTDONE_I965	0x0206c
+#define INSTPS		0x02070 /* 965+ only */
+#define INSTDONE1	0x0207c /* 965+ only */
 #define ACTHD_I965	0x02074
 #define HWS_PGA		0x02080
 #define HWS_ADDRESS_MASK	0xfffff000
 #define HWS_START_ADDRESS_SHIFT	4
 #define IPEIR		0x02088
+#define IPEHR		0x0208c
+#define INSTDONE	0x02090
 #define NOPID		0x02094
 #define HWSTAM		0x02098
 #define SCPD0		0x0209c /* 915+ only */
@@ -258,6 +266,12 @@
 #define EIR		0x020b0
 #define EMR		0x020b4
 #define ESR		0x020b8
+#define   GM45_ERROR_PAGE_TABLE				(1<<5)
+#define   GM45_ERROR_MEM_PRIV				(1<<4)
+#define   I915_ERROR_PAGE_TABLE				(1<<4)
+#define   GM45_ERROR_CP_PRIV				(1<<3)
+#define   I915_ERROR_MEMORY_REFRESH			(1<<1)
+#define   I915_ERROR_INSTRUCTION			(1<<0)
 #define INSTPM	        0x020c0
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
-- 
cgit v1.2.3


From 7662c8bd6545c12ac7b2b39e4554c3ba34789c50 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Fri, 26 Jun 2009 11:23:55 +0800
Subject: drm/i915: add FIFO watermark support

This patch from jbarnes and myself adds FIFO watermark control to the
driver.  This is needed for both power saving features on new platforms
with the so-called "big FIFO" and for controlling FIFO allocation
between pipes in multi-head configurations.

It's also necessary infrastructure to support things like framebuffer
compression and configuration supportability checks (i.e. checking a
configuration against available bandwidth).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c      |  40 ++++
 drivers/gpu/drm/i915/i915_drv.h      |   4 +
 drivers/gpu/drm/i915/i915_irq.c      |   4 +
 drivers/gpu/drm/i915/i915_reg.h      |  46 +++-
 drivers/gpu/drm/i915/intel_display.c | 425 ++++++++++++++++++++++++++++++++++-
 5 files changed, 513 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f83364974a8a..6096600aff60 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1082,6 +1082,44 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
 	master->driver_priv = NULL;
 }
 
+static void i915_get_mem_freq(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 tmp;
+
+	if (!IS_IGD(dev))
+		return;
+
+	tmp = I915_READ(CLKCFG);
+
+	switch (tmp & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_533:
+		dev_priv->fsb_freq = 533; /* 133*4 */
+		break;
+	case CLKCFG_FSB_800:
+		dev_priv->fsb_freq = 800; /* 200*4 */
+		break;
+	case CLKCFG_FSB_667:
+		dev_priv->fsb_freq =  667; /* 167*4 */
+		break;
+	case CLKCFG_FSB_400:
+		dev_priv->fsb_freq = 400; /* 100*4 */
+		break;
+	}
+
+	switch (tmp & CLKCFG_MEM_MASK) {
+	case CLKCFG_MEM_533:
+		dev_priv->mem_freq = 533;
+		break;
+	case CLKCFG_MEM_667:
+		dev_priv->mem_freq = 667;
+		break;
+	case CLKCFG_MEM_800:
+		dev_priv->mem_freq = 800;
+		break;
+	}
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1165,6 +1203,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 			goto out_iomapfree;
 	}
 
+	i915_get_mem_freq(dev);
+
 	/* On the 945G/GM, the chipset reports the MSI capability on the
 	 * integrated graphics even though the support isn't actually there
 	 * according to the published specs.  It doesn't appear to function
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 596e119d3e0e..47ecb617e519 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -225,6 +225,8 @@ typedef struct drm_i915_private {
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
+	unsigned int fsb_freq, mem_freq;
+
 	spinlock_t error_lock;
 	struct drm_i915_error_state *first_error;
 
@@ -889,6 +891,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+/* dsparb controlled by hw only */
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 17b308592c4f..7ba23a69a0c0 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -376,11 +376,15 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		 * Clear the PIPE(A|B)STAT regs before the IIR
 		 */
 		if (pipea_stats & 0x8000ffff) {
+			if (pipea_stats &  PIPE_FIFO_UNDERRUN_STATUS)
+				DRM_DEBUG("pipe a underrun\n");
 			I915_WRITE(PIPEASTAT, pipea_stats);
 			irq_received = 1;
 		}
 
 		if (pipeb_stats & 0x8000ffff) {
+			if (pipeb_stats &  PIPE_FIFO_UNDERRUN_STATUS)
+				DRM_DEBUG("pipe b underrun\n");
 			I915_WRITE(PIPEBSTAT, pipeb_stats);
 			irq_received = 1;
 		}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ad3d1b5db95e..6c0858484094 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -275,7 +275,13 @@
 #define INSTPM	        0x020c0
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
+#define FW_BLC2	 	0x020dc
 #define FW_BLC_SELF	0x020e0 /* 915+ only */
+#define   FW_BLC_SELF_EN (1<<15)
+#define MM_BURST_LENGTH     0x00700000
+#define MM_FIFO_WATERMARK   0x0001F000
+#define LM_BURST_LENGTH     0x00000700
+#define LM_FIFO_WATERMARK   0x0000001F
 #define MI_ARB_STATE	0x020e4 /* 915+ only */
 #define CACHE_MODE_0	0x02120 /* 915+ only */
 #define   CM0_MASK_SHIFT          16
@@ -585,17 +591,21 @@
 
 /* Clocking configuration register */
 #define CLKCFG			0x10c00
-#define CLKCFG_FSB_400					(0 << 0)	/* hrawclk 100 */
+#define CLKCFG_FSB_400					(5 << 0)	/* hrawclk 100 */
 #define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
 #define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
 #define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
 #define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
 #define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
-/* this is a guess, could be 5 as well */
+/* Note, below two are guess */
 #define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
-#define CLKCFG_FSB_1600_ALT				(5 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
 #define CLKCFG_FSB_MASK					(7 << 0)
- 
+#define CLKCFG_MEM_533					(1 << 4)
+#define CLKCFG_MEM_667					(2 << 4)
+#define CLKCFG_MEM_800					(3 << 4)
+#define CLKCFG_MEM_MASK					(7 << 4)
+
 /** GM965 GM45 render standby register */
 #define MCHBAR_RENDER_STANDBY	0x111B8
 
@@ -1595,6 +1605,34 @@
 #define   DSPARB_CSTART_SHIFT	7
 #define   DSPARB_BSTART_MASK	(0x7f)
 #define   DSPARB_BSTART_SHIFT	0
+#define   DSPARB_BEND_SHIFT	9 /* on 855 */
+#define   DSPARB_AEND_SHIFT	0
+
+#define DSPFW1			0x70034
+#define DSPFW2			0x70038
+#define DSPFW3			0x7003c
+#define   IGD_SELF_REFRESH_EN	(1<<30)
+
+/* FIFO watermark sizes etc */
+#define I915_FIFO_LINE_SIZE	64
+#define I830_FIFO_LINE_SIZE	32
+#define I945_FIFO_SIZE		127 /* 945 & 965 */
+#define I915_FIFO_SIZE		95
+#define I855GM_FIFO_SIZE	255
+#define I830_FIFO_SIZE		95
+#define I915_MAX_WM		0x3f
+
+#define IGD_DISPLAY_FIFO	512 /* in 64byte unit */
+#define IGD_FIFO_LINE_SIZE	64
+#define IGD_MAX_WM		0x1ff
+#define IGD_DFT_WM		0x3f
+#define IGD_DFT_HPLLOFF_WM	0
+#define IGD_GUARD_WM		10
+#define IGD_CURSOR_FIFO		64
+#define IGD_CURSOR_MAX_WM	0x3f
+#define IGD_CURSOR_DFT_WM	0
+#define IGD_CURSOR_GUARD_WM	5
+
 /*
  * The two pipe frame counter registers are not synchronized, so
  * reading a stable value is somewhat tricky. The following code
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 73e7b9cecac8..a84ac05ef048 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/i2c.h>
+#include <linux/kernel.h>
 #include "drmP.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
@@ -34,6 +35,7 @@
 #include "drm_crtc_helper.h"
 
 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+static void intel_update_watermarks(struct drm_device *dev);
 
 typedef struct {
     /* given values */
@@ -1005,7 +1007,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
 	int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
 	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
 	int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
@@ -1335,8 +1337,10 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 		/* Give the overlay scaler a chance to enable if it's on this pipe */
 		//intel_crtc_dpms_video(crtc, true); TODO
+		intel_update_watermarks(dev);
 	break;
 	case DRM_MODE_DPMS_OFF:
+		intel_update_watermarks(dev);
 		/* Give the overlay scaler a chance to disable if it's on this pipe */
 		//intel_crtc_dpms_video(crtc, FALSE); TODO
 
@@ -1515,7 +1519,6 @@ static int intel_get_core_clock_speed(struct drm_device *dev)
 	return 0; /* Silence gcc warning */
 }
 
-
 /**
  * Return the pipe currently connected to the panel fitter,
  * or -1 if the panel fitter is not present or not in use
@@ -1585,6 +1588,420 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes,
 }
 
 
+struct intel_watermark_params {
+	unsigned long fifo_size;
+	unsigned long max_wm;
+	unsigned long default_wm;
+	unsigned long guard_size;
+	unsigned long cacheline_size;
+};
+
+/* IGD has different values for various configs */
+static struct intel_watermark_params igd_display_wm = {
+	IGD_DISPLAY_FIFO,
+	IGD_MAX_WM,
+	IGD_DFT_WM,
+	IGD_GUARD_WM,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_display_hplloff_wm = {
+	IGD_DISPLAY_FIFO,
+	IGD_MAX_WM,
+	IGD_DFT_HPLLOFF_WM,
+	IGD_GUARD_WM,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_cursor_wm = {
+	IGD_CURSOR_FIFO,
+	IGD_CURSOR_MAX_WM,
+	IGD_CURSOR_DFT_WM,
+	IGD_CURSOR_GUARD_WM,
+	IGD_FIFO_LINE_SIZE,
+};
+static struct intel_watermark_params igd_cursor_hplloff_wm = {
+	IGD_CURSOR_FIFO,
+	IGD_CURSOR_MAX_WM,
+	IGD_CURSOR_DFT_WM,
+	IGD_CURSOR_GUARD_WM,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i945_wm_info = {
+	I915_FIFO_LINE_SIZE,
+	I915_MAX_WM,
+	1,
+	0,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i915_wm_info = {
+	I945_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	0,
+	I915_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i855_wm_info = {
+	I855GM_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	0,
+	I830_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i830_wm_info = {
+	I830_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	0,
+	I830_FIFO_LINE_SIZE
+};
+
+static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
+					struct intel_watermark_params *wm,
+					int pixel_size,
+					unsigned long latency_ns)
+{
+	unsigned long bytes_required, wm_size;
+
+	bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+	bytes_required /= wm->cacheline_size;
+	wm_size = wm->fifo_size - bytes_required - wm->guard_size;
+
+	if (wm_size > wm->max_wm)
+		wm_size = wm->max_wm;
+	if (wm_size == 0)
+		wm_size = wm->default_wm;
+	return wm_size;
+}
+
+struct cxsr_latency {
+	int is_desktop;
+	unsigned long fsb_freq;
+	unsigned long mem_freq;
+	unsigned long display_sr;
+	unsigned long display_hpll_disable;
+	unsigned long cursor_sr;
+	unsigned long cursor_hpll_disable;
+};
+
+static struct cxsr_latency cxsr_latency_table[] = {
+	{1, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
+	{1, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
+	{1, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
+
+	{1, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
+	{1, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
+	{1, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
+
+	{1, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
+	{1, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
+	{1, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
+
+	{0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
+	{0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
+	{0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
+
+	{0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
+	{0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
+	{0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
+
+	{0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
+	{0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
+	{0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
+};
+
+static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
+						   int mem)
+{
+	int i;
+	struct cxsr_latency *latency;
+
+	if (fsb == 0 || mem == 0)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
+		latency = &cxsr_latency_table[i];
+		if (is_desktop == latency->is_desktop &&
+			fsb == latency->fsb_freq && mem == latency->mem_freq)
+			break;
+	}
+	if (i >= ARRAY_SIZE(cxsr_latency_table)) {
+		DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+		return NULL;
+	}
+	return latency;
+}
+
+static void igd_disable_cxsr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+
+	/* deactivate cxsr */
+	reg = I915_READ(DSPFW3);
+	reg &= ~(IGD_SELF_REFRESH_EN);
+	I915_WRITE(DSPFW3, reg);
+	DRM_INFO("Big FIFO is disabled\n");
+}
+
+static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock,
+			    int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+	unsigned long wm;
+	struct cxsr_latency *latency;
+
+	latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq,
+		dev_priv->mem_freq);
+	if (!latency) {
+		DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+		igd_disable_cxsr(dev);
+		return;
+	}
+
+	/* Display SR */
+	wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size,
+				latency->display_sr);
+	reg = I915_READ(DSPFW1);
+	reg &= 0x7fffff;
+	reg |= wm << 23;
+	I915_WRITE(DSPFW1, reg);
+	DRM_DEBUG("DSPFW1 register is %x\n", reg);
+
+	/* cursor SR */
+	wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size,
+				latency->cursor_sr);
+	reg = I915_READ(DSPFW3);
+	reg &= ~(0x3f << 24);
+	reg |= (wm & 0x3f) << 24;
+	I915_WRITE(DSPFW3, reg);
+
+	/* Display HPLL off SR */
+	wm = intel_calculate_wm(clock, &igd_display_hplloff_wm,
+		latency->display_hpll_disable, I915_FIFO_LINE_SIZE);
+	reg = I915_READ(DSPFW3);
+	reg &= 0xfffffe00;
+	reg |= wm & 0x1ff;
+	I915_WRITE(DSPFW3, reg);
+
+	/* cursor HPLL off SR */
+	wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size,
+				latency->cursor_hpll_disable);
+	reg = I915_READ(DSPFW3);
+	reg &= ~(0x3f << 16);
+	reg |= (wm & 0x3f) << 16;
+	I915_WRITE(DSPFW3, reg);
+	DRM_DEBUG("DSPFW3 register is %x\n", reg);
+
+	/* activate cxsr */
+	reg = I915_READ(DSPFW3);
+	reg |= IGD_SELF_REFRESH_EN;
+	I915_WRITE(DSPFW3, reg);
+
+	DRM_INFO("Big FIFO is enabled\n");
+
+	return;
+}
+
+const static int latency_ns = 5000; /* default for non-igd platforms */
+
+
+static void i965_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n");
+
+	/* 965 has limitations... */
+	I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0));
+	I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+}
+
+static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
+			   int planeb_clock, int sr_hdisplay, int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
+	uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK;
+	int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int planea_entries, planeb_entries;
+	struct intel_watermark_params *wm_params;
+	unsigned long line_time_us;
+	int sr_clock, sr_entries = 0;
+
+	if (IS_I965GM(dev) || IS_I945GM(dev))
+		wm_params = &i945_wm_info;
+	else if (IS_I9XX(dev))
+		wm_params = &i915_wm_info;
+	else
+		wm_params = &i855_wm_info;
+
+	planea_entries = intel_calculate_wm(planea_clock, wm_params,
+					    pixel_size, latency_ns);
+	planeb_entries = intel_calculate_wm(planeb_clock, wm_params,
+					    pixel_size, latency_ns);
+
+	DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries,
+		  planeb_entries);
+
+	if (IS_I9XX(dev)) {
+		asize = dsparb & 0x7f;
+		bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f;
+	} else {
+		asize = dsparb & 0x1ff;
+		bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff;
+	}
+	DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize);
+
+	/* Two extra entries for padding */
+	awm = asize - (planea_entries + 2);
+	bwm = bsize - (planeb_entries + 2);
+
+	/* Sanity check against potentially bad FIFO allocations */
+	if (awm <= 0) {
+		/* pipe is on but has too few FIFO entries */
+		if (planea_entries != 0)
+			DRM_DEBUG("plane A needs more FIFO entries\n");
+		awm = 1;
+	}
+	if (bwm <= 0) {
+		if (planeb_entries != 0)
+			DRM_DEBUG("plane B needs more FIFO entries\n");
+		bwm = 1;
+	}
+
+	/*
+	 * Overlay gets an aggressive default since video jitter is bad.
+	 */
+	cwm = 2;
+
+	/* Calc sr entries for one pipe configs */
+	if (!planea_clock || !planeb_clock) {
+		sr_clock = planea_clock ? planea_clock : planeb_clock;
+		line_time_us = (sr_hdisplay * 1000) / sr_clock;
+		sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size *
+			      sr_hdisplay) / 1000;
+		sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1);
+		if (sr_entries < wm_params->fifo_size)
+			srwm = wm_params->fifo_size - sr_entries;
+	}
+
+	DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
+		  awm, bwm, cwm, srwm);
+
+	fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f);
+	fwater_hi = fwater_hi | (cwm & 0x1f);
+
+	I915_WRITE(FW_BLC, fwater_lo);
+	I915_WRITE(FW_BLC2, fwater_hi);
+	if (IS_I9XX(dev))
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
+}
+
+static void i830_update_wm(struct drm_device *dev, int planea_clock,
+			   int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
+	unsigned int asize, awm;
+	int planea_entries;
+
+	planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info,
+					    pixel_size, latency_ns);
+
+	asize = dsparb & 0x7f;
+
+	awm = asize - planea_entries;
+
+	fwater_lo = fwater_lo | awm;
+
+	I915_WRITE(FW_BLC, fwater_lo);
+}
+
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ *   - normal (i.e. non-self-refresh)
+ *   - self-refresh (SR) mode
+ *   - lines are large relative to FIFO size (buffer can hold up to 2)
+ *   - lines are small relative to FIFO size (buffer can hold more than 2
+ *     lines), so need to account for TLB latency
+ *
+ *   The normal calculation is:
+ *     watermark = dotclock * bytes per pixel * latency
+ *   where latency is platform & configuration dependent (we assume pessimal
+ *   values here).
+ *
+ *   The SR calculation is:
+ *     watermark = (trunc(latency/line time)+1) * surface width *
+ *       bytes per pixel
+ *   where
+ *     line time = htotal / dotclock
+ *   and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that.  And on Crestline we have
+ * to set the non-SR watermarks to 8.
+  */
+static void intel_update_watermarks(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+	int sr_hdisplay = 0;
+	unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
+	int enabled = 0, pixel_size = 0;
+
+	if (DSPARB_HWCONTROL(dev))
+		return;
+
+	/* Get the clock config from both planes */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		intel_crtc = to_intel_crtc(crtc);
+		if (crtc->enabled) {
+			enabled++;
+			if (intel_crtc->plane == 0) {
+				DRM_DEBUG("plane A (pipe %d) clock: %d\n",
+					  intel_crtc->pipe, crtc->mode.clock);
+				planea_clock = crtc->mode.clock;
+			} else {
+				DRM_DEBUG("plane B (pipe %d) clock: %d\n",
+					  intel_crtc->pipe, crtc->mode.clock);
+				planeb_clock = crtc->mode.clock;
+			}
+			sr_hdisplay = crtc->mode.hdisplay;
+			sr_clock = crtc->mode.clock;
+			if (crtc->fb)
+				pixel_size = crtc->fb->bits_per_pixel / 8;
+			else
+				pixel_size = 4; /* by default */
+		}
+	}
+
+	if (enabled <= 0)
+		return;
+
+	/* Single pipe configs can enable self refresh */
+	if (enabled == 1 && IS_IGD(dev))
+		igd_enable_cxsr(dev, sr_clock, pixel_size);
+	else if (IS_IGD(dev))
+		igd_disable_cxsr(dev);
+
+	if (IS_I965G(dev))
+		i965_update_wm(dev);
+	else if (IS_I9XX(dev) || IS_MOBILE(dev))
+		i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay,
+			       pixel_size);
+	else
+		i830_update_wm(dev, planea_clock, pixel_size);
+}
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
@@ -1951,6 +2368,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Flush the plane changes */
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
 	drm_vblank_post_modeset(dev, pipe);
 
 	return ret;
@@ -2439,6 +2859,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 	drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
 	intel_crtc->pipe = pipe;
+	intel_crtc->plane = pipe;
 	for (i = 0; i < 256; i++) {
 		intel_crtc->lut_r[i] = i;
 		intel_crtc->lut_g[i] = i;
-- 
cgit v1.2.3


From 6ff4fd05676bc5b5c930bef25901e489f7843660 Mon Sep 17 00:00:00 2001
From: "ling.ma@intel.com" <ling.ma@intel.com>
Date: Thu, 25 Jun 2009 10:59:22 +0800
Subject: drm/i915: Set SSC frequency for 8xx chips correctly

All 8xx class chips have the 66/48 split, not just 855.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_bios.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 716409a57244..da22863c05c0 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -195,10 +195,12 @@ parse_general_features(struct drm_i915_private *dev_priv,
 		dev_priv->lvds_use_ssc = general->enable_ssc;
 
 		if (dev_priv->lvds_use_ssc) {
-		  if (IS_I855(dev_priv->dev))
-		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
-		  else
-		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+			if (IS_I85X(dev_priv->dev))
+				dev_priv->lvds_ssc_freq =
+					general->ssc_freq ? 66 : 48;
+			else
+				dev_priv->lvds_ssc_freq =
+					general->ssc_freq ? 100 : 96;
 		}
 	}
 }
-- 
cgit v1.2.3


From 12682a971160959072c4970da9b7778709f60bc9 Mon Sep 17 00:00:00 2001
From: "ling.ma@intel.com" <ling.ma@intel.com>
Date: Tue, 30 Jun 2009 11:35:35 +0800
Subject: drm/i915: enable sdvo lvds scaling function.

Currently we implemented basic sdvo lvds function,
But except for sdvo lvds fixed mode, we can not switch
to other modes, otherwise display get black. The patch
handle three operations to enable sdvo lvds. At first
duplicate sdvo fixed mode for adjustment, then according
to fixed mode line valid all modes, at last adjust input
mode to fit our requirement.

Acked by Li Peng <peng.li@linux.intel.com>
Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_sdvo.c      | 114 +++++++++++++++++++++++++++++----
 drivers/gpu/drm/i915/intel_sdvo_regs.h |   1 +
 2 files changed, 103 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f03473779feb..4f0c30948bc4 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -68,11 +68,22 @@ struct intel_sdvo_priv {
 	 * This is set if we treat the device as HDMI, instead of DVI.
 	 */
 	bool is_hdmi;
+
 	/**
 	 * This is set if we detect output of sdvo device as LVDS.
 	 */
 	bool is_lvds;
 
+	/**
+	 * This is sdvo flags for input timing.
+	 */
+	uint8_t sdvo_flags;
+
+	/**
+	 * This is sdvo fixed pannel mode pointer
+	 */
+	struct drm_display_mode *sdvo_lvds_fixed_mode;
+
 	/**
 	 * Returned SDTV resolutions allowed for the current format, if the
 	 * device reported it.
@@ -592,6 +603,7 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output,
 					 uint16_t height)
 {
 	struct intel_sdvo_preferred_input_timing_args args;
+	struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
 	uint8_t status;
 
 	memset(&args, 0, sizeof(args));
@@ -599,7 +611,12 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output,
 	args.width = width;
 	args.height = height;
 	args.interlace = 0;
-	args.scaled = 0;
+
+	if (sdvo_priv->is_lvds &&
+	   (sdvo_priv->sdvo_lvds_fixed_mode->hdisplay != width ||
+	    sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height))
+		args.scaled = 1;
+
 	intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
 			     &args, sizeof(args));
 	status = intel_sdvo_read_response(output, NULL, 0);
@@ -944,12 +961,7 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 	struct intel_output *output = enc_to_intel_output(encoder);
 	struct intel_sdvo_priv *dev_priv = output->dev_priv;
 
-	if (!dev_priv->is_tv) {
-		/* Make the CRTC code factor in the SDVO pixel multiplier.  The
-		 * SDVO device will be told of the multiplier during mode_set.
-		 */
-		adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
-	} else {
+	if (dev_priv->is_tv) {
 		struct intel_sdvo_dtd output_dtd;
 		bool success;
 
@@ -980,6 +992,47 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 			intel_sdvo_get_preferred_input_timing(output,
 							     &input_dtd);
 			intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+			dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
+
+			drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+			mode->clock = adjusted_mode->clock;
+
+			adjusted_mode->clock *=
+				intel_sdvo_get_pixel_multiplier(mode);
+		} else {
+			return false;
+		}
+	} else if (dev_priv->is_lvds) {
+		struct intel_sdvo_dtd output_dtd;
+		bool success;
+
+		drm_mode_set_crtcinfo(dev_priv->sdvo_lvds_fixed_mode, 0);
+		/* Set output timings */
+		intel_sdvo_get_dtd_from_mode(&output_dtd,
+				dev_priv->sdvo_lvds_fixed_mode);
+
+		intel_sdvo_set_target_output(output,
+					     dev_priv->controlled_output);
+		intel_sdvo_set_output_timing(output, &output_dtd);
+
+		/* Set the input timing to the screen. Assume always input 0. */
+		intel_sdvo_set_target_input(output, true, false);
+
+
+		success = intel_sdvo_create_preferred_input_timing(
+				output,
+				mode->clock / 10,
+				mode->hdisplay,
+				mode->vdisplay);
+
+		if (success) {
+			struct intel_sdvo_dtd input_dtd;
+
+			intel_sdvo_get_preferred_input_timing(output,
+							     &input_dtd);
+			intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+			dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
 
 			drm_mode_set_crtcinfo(adjusted_mode, 0);
 
@@ -990,6 +1043,12 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 		} else {
 			return false;
 		}
+
+	} else {
+		/* Make the CRTC code factor in the SDVO pixel multiplier.  The
+		 * SDVO device will be told of the multiplier during mode_set.
+		 */
+		adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
 	}
 	return true;
 }
@@ -1033,15 +1092,16 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 
 	/* We have tried to get input timing in mode_fixup, and filled into
 	   adjusted_mode */
-	if (sdvo_priv->is_tv)
+	if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
 		intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
-	else
+		input_dtd.part2.sdvo_flags = sdvo_priv->sdvo_flags;
+	} else
 		intel_sdvo_get_dtd_from_mode(&input_dtd, mode);
 
 	/* If it's a TV, we already set the output timing in mode_fixup.
 	 * Otherwise, the output timing is equal to the input timing.
 	 */
-	if (!sdvo_priv->is_tv) {
+	if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) {
 		/* Set the output timing to the screen */
 		intel_sdvo_set_target_output(output,
 					     sdvo_priv->controlled_output);
@@ -1116,6 +1176,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 		sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
 	}
 
+	if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL)
+		sdvox |= SDVO_STALL_SELECT;
 	intel_sdvo_write_sdvox(output, sdvox);
 }
 
@@ -1276,6 +1338,17 @@ static int intel_sdvo_mode_valid(struct drm_connector *connector,
 	if (sdvo_priv->pixel_clock_max < mode->clock)
 		return MODE_CLOCK_HIGH;
 
+	if (sdvo_priv->is_lvds == true) {
+		if (sdvo_priv->sdvo_lvds_fixed_mode == NULL)
+			return MODE_PANEL;
+
+		if (mode->hdisplay > sdvo_priv->sdvo_lvds_fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay > sdvo_priv->sdvo_lvds_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
 	return MODE_OK;
 }
 
@@ -1549,6 +1622,8 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	struct drm_display_mode *newmode;
 
 	/*
 	 * Attempt to get the mode list from DDC.
@@ -1557,11 +1632,10 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 	 */
 	intel_ddc_get_modes(intel_output);
 	if (list_empty(&connector->probed_modes) == false)
-		return;
+		goto end;
 
 	/* Fetch modes from VBT */
 	if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
-		struct drm_display_mode *newmode;
 		newmode = drm_mode_duplicate(connector->dev,
 					     dev_priv->sdvo_lvds_vbt_mode);
 		if (newmode != NULL) {
@@ -1571,6 +1645,16 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 			drm_mode_probed_add(connector, newmode);
 		}
 	}
+
+end:
+	list_for_each_entry(newmode, &connector->probed_modes, head) {
+		if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
+			sdvo_priv->sdvo_lvds_fixed_mode =
+				drm_mode_duplicate(connector->dev, newmode);
+			break;
+		}
+	}
+
 }
 
 static int intel_sdvo_get_modes(struct drm_connector *connector)
@@ -1593,14 +1677,20 @@ static int intel_sdvo_get_modes(struct drm_connector *connector)
 static void intel_sdvo_destroy(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 
 	if (intel_output->i2c_bus)
 		intel_i2c_destroy(intel_output->i2c_bus);
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 
+	if (sdvo_priv->sdvo_lvds_fixed_mode != NULL)
+		drm_mode_destroy(connector->dev,
+				 sdvo_priv->sdvo_lvds_fixed_mode);
+
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
+
 	kfree(intel_output);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index 193938b7d7f9..ba5cdf8ae40b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -715,6 +715,7 @@ struct intel_sdvo_enhancements_arg {
   #define SDVO_HBUF_TX_ONCE	(2 << 6)
   #define SDVO_HBUF_TX_VSYNC	(3 << 6)
 #define SDVO_CMD_GET_AUDIO_TX_INFO	0x9c
+#define SDVO_NEED_TO_STALL  (1 << 7)
 
 struct intel_sdvo_encode{
     u8 dvi_rev;
-- 
cgit v1.2.3


From 956dba3caaf66b84fe5f6180e0e4dd03902c7980 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Wed, 1 Jul 2009 15:20:59 +0100
Subject: drm/i915: fix up a raw 64bit divide

We are seeing compilation failures on i386 in some environments due
to an undefined reference as below:

    ERROR: "__udivdi3" [drivers/gpu/drm/i915/i915.ko] undefined!

This is generated due to a raw 64 bit divide in the i915 driver.  Fix up
this raw divide.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a84ac05ef048..59de4951b6ee 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1577,7 +1577,7 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes,
 
 	temp = (u64) DATA_N * pixel_clock;
 	temp = div_u64(temp, link_clock);
-	m_n->gmch_m = (temp * bytes_per_pixel) / nlanes;
+	m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
 	m_n->gmch_n = DATA_N;
 	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 
-- 
cgit v1.2.3


From 1ae8c0a56eeb3ed358b78ccadd024d6b721f26bc Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Sun, 28 Jun 2009 15:42:17 -0700
Subject: drm/i915: Make driver less chatty

Convert many printk calls to DRM_DEBUG calls to reduce kernel log noise
for normal activities. Switch other printk calls to DRM_ERROR or DRM_INFO.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c     |  2 +-
 drivers/gpu/drm/i915/i915_drv.c     |  4 ++--
 drivers/gpu/drm/i915/intel_dp.c     | 11 +++++++----
 drivers/gpu/drm/i915/intel_dp_i2c.c | 11 ++++++-----
 drivers/gpu/drm/i915/intel_fb.c     | 18 +++++++++---------
 drivers/gpu/drm/i915/intel_lvds.c   |  4 ++--
 6 files changed, 27 insertions(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 6096600aff60..0e704bb26e99 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -846,7 +846,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 		return 0;
 	}
 
-	printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
+	DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr);
 
 	dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index e3cb4025e323..aef2a261a837 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -57,8 +57,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (!dev || !dev_priv) {
-		printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
-		printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+		DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
+		DRM_ERROR("DRM not initialized, aborting suspend.\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8f8d37d5663a..6770ae88370d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -246,7 +246,7 @@ intel_dp_aux_ch(struct intel_output *intel_output,
 	}
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
-		printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);
+		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
 		return -EBUSY;
 	}
 
@@ -254,11 +254,14 @@ intel_dp_aux_ch(struct intel_output *intel_output,
 	 * Timeouts occur when the sink is not connected
 	 */
 	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
-		printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status);
+		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
 		return -EIO;
 	}
+
+	/* Timeouts occur when the device isn't connected, so they're
+	 * "normal" -- don't fill the kernel log with these */
 	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
-		printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status);
+		DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status);
 		return -ETIMEDOUT;
 	}
 
@@ -411,7 +414,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 				dp_priv->link_bw = bws[clock];
 				dp_priv->lane_count = lane_count;
 				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
-				printk(KERN_ERR "link bw %02x lane count %d clock %d\n",
+				DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n",
 				       dp_priv->link_bw, dp_priv->lane_count,
 				       adjusted_mode->clock);
 				return true;
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
index 4e60f14b1a6d..a63b6f57d2d4 100644
--- a/drivers/gpu/drm/i915/intel_dp_i2c.c
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/i2c.h>
 #include "intel_dp.h"
+#include "drmP.h"
 
 /* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
 
@@ -84,7 +85,7 @@ i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
 					   msg, msg_bytes,
 					   reply, reply_bytes);
 		if (ret < 0) {
-			printk(KERN_ERR "aux_ch failed %d\n", ret);
+			DRM_DEBUG("aux_ch failed %d\n", ret);
 			return ret;
 		}
 		switch (reply[0] & AUX_I2C_REPLY_MASK) {
@@ -94,14 +95,14 @@ i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
 			}
 			return reply_bytes - 1;
 		case AUX_I2C_REPLY_NACK:
-			printk(KERN_ERR "aux_ch nack\n");
+			DRM_DEBUG("aux_ch nack\n");
 			return -EREMOTEIO;
 		case AUX_I2C_REPLY_DEFER:
-			printk(KERN_ERR "aux_ch defer\n");
+			DRM_DEBUG("aux_ch defer\n");
 			udelay(100);
 			break;
 		default:
-			printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+			DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
 			return -EREMOTEIO;
 		}
 	}
@@ -223,7 +224,7 @@ i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
 	if (ret >= 0)
 		ret = num;
 	i2c_algo_dp_aux_stop(adapter, reading);
-	printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+	DRM_DEBUG("dp_aux_xfer return %d\n", ret);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 1af7d68e3807..1d30802e773e 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -453,7 +453,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	size = ALIGN(size, PAGE_SIZE);
 	fbo = drm_gem_object_alloc(dev, size);
 	if (!fbo) {
-		printk(KERN_ERR "failed to allocate framebuffer\n");
+		DRM_ERROR("failed to allocate framebuffer\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -610,8 +610,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	par->dev = dev;
 
 	/* To allow resizeing without swapping buffers */
-	printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
-	       intel_fb->base.height, obj_priv->gtt_offset, fbo);
+	DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
+		  intel_fb->base.height, obj_priv->gtt_offset, fbo);
 
 	mutex_unlock(&dev->struct_mutex);
 	return 0;
@@ -698,13 +698,13 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *
 	} else
 		intelfb_set_par(info);
 
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	DRM_INFO("fb%d: %s frame buffer device\n", info->node,
 	       info->fix.id);
 
 	/* Switch back to kernel console on panic */
 	kernelfb_mode = *modeset;
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-	printk(KERN_INFO "registered panic notifier\n");
+	DRM_DEBUG("registered panic notifier\n");
 
 	return 0;
 }
@@ -852,13 +852,13 @@ static int intelfb_single_fb_probe(struct drm_device *dev)
 	} else
 		intelfb_set_par(info);
 
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	DRM_INFO("fb%d: %s frame buffer device\n", info->node,
 	       info->fix.id);
 
 	/* Switch back to kernel console on panic */
 	kernelfb_mode = *modeset;
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-	printk(KERN_INFO "registered panic notifier\n");
+	DRM_DEBUG("registered panic notifier\n");
 
 	return 0;
 }
@@ -872,8 +872,8 @@ void intelfb_restore(void)
 {
 	int ret;
 	if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) {
-		printk(KERN_ERR "Failed to restore crtc configuration: %d\n",
-		       ret);
+		DRM_ERROR("Failed to restore crtc configuration: %d\n",
+			  ret);
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9564ca44a977..f65044b1647b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -252,14 +252,14 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 
 	/* Should never happen!! */
 	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
-		printk(KERN_ERR "Can't support LVDS on pipe A\n");
+		DRM_ERROR("Can't support LVDS on pipe A\n");
 		return false;
 	}
 
 	/* Should never happen!! */
 	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
 		if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
-			printk(KERN_ERR "Can't enable LVDS and another "
+			DRM_ERROR("Can't enable LVDS and another "
 			       "encoder on the same pipe\n");
 			return false;
 		}
-- 
cgit v1.2.3


From b3d254955fb5797232ec329b136c363aa4fdaa05 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Wed, 24 Jun 2009 23:09:15 -0700
Subject: drm/i915: Adjust DisplayPort clocks to use 96MHz reference

For some reason, the DP clocks were based off a 100MHz reference instead of
the standard 96MHz reference. This caused some DP monitors to fail to lock
to the signal.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_display.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 59de4951b6ee..508838ee31e0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -816,24 +816,21 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 {
     intel_clock_t clock;
     if (target < 200000) {
-	clock.dot = 161670;
-	clock.p = 20;
 	clock.p1 = 2;
 	clock.p2 = 10;
-	clock.n = 0x01;
-	clock.m = 97;
-	clock.m1 = 0x10;
-	clock.m2 = 0x05;
+	clock.n = 2;
+	clock.m1 = 23;
+	clock.m2 = 8;
     } else {
-	clock.dot = 270000;
-	clock.p = 10;
 	clock.p1 = 1;
 	clock.p2 = 10;
-	clock.n = 0x02;
-	clock.m = 108;
-	clock.m1 = 0x12;
-	clock.m2 = 0x06;
+	clock.n = 1;
+	clock.m1 = 14;
+	clock.m2 = 2;
     }
+    clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
+    clock.p = (clock.p1 * clock.p2);
+    clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
     memcpy(best_clock, &clock, sizeof(intel_clock_t));
     return true;
 }
-- 
cgit v1.2.3


From 22bd50c5b9aaf46476cade52c4ae9afa21c44e15 Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Mon, 6 Jul 2009 17:27:52 +0800
Subject: drm/i915: Don't update display FIFO watermark on IGDNG

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 47ecb617e519..9aa3263c56dc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -892,7 +892,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 /* dsparb controlled by hw only */
-#define DSPARB_HWCONTROL(dev) (IS_G4X(dev))
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
-- 
cgit v1.2.3


From 8e4d36b993898b344f9176147f1dfeca583f81fd Mon Sep 17 00:00:00 2001
From: "ling.ma@intel.com" <ling.ma@intel.com>
Date: Tue, 30 Jun 2009 11:35:34 +0800
Subject: drm/i915: crt fetch EDID by DVI-I converter on G4x platform

Usually crt mainly get modes via GPIOA ports.
However on G4X platform we need to probe possible
ports for DVI-I, which could be wired to GPIOD,
then fetch our desired EDID, i.e on DG45ID platform
we successfully fetch EDID by GPIOD port.

It fixed freedesktop.org bug #21084

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_crt.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 6de97fc66029..af26028c2514 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -428,8 +428,34 @@ static void intel_crt_destroy(struct drm_connector *connector)
 
 static int intel_crt_get_modes(struct drm_connector *connector)
 {
+	int ret;
 	struct intel_output *intel_output = to_intel_output(connector);
-	return intel_ddc_get_modes(intel_output);
+	struct intel_i2c_chan *ddcbus;
+	struct drm_device *dev = connector->dev;
+
+
+	ret = intel_ddc_get_modes(intel_output);
+	if (ret || !IS_G4X(dev))
+		goto end;
+
+	ddcbus = intel_output->ddc_bus;
+	/* Try to probe digital port for output in DVI-I -> VGA mode. */
+	intel_output->ddc_bus =
+		intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
+
+	if (!intel_output->ddc_bus) {
+		intel_output->ddc_bus = ddcbus;
+		dev_printk(KERN_ERR, &connector->dev->pdev->dev,
+			   "DDC bus registration failed for CRTDDC_D.\n");
+		goto end;
+	}
+	/* Try to get modes by GPIOD port */
+	ret = intel_ddc_get_modes(intel_output);
+	intel_i2c_destroy(ddcbus);
+
+end:
+	return ret;
+
 }
 
 static int intel_crt_set_property(struct drm_connector *connector,
-- 
cgit v1.2.3


From febc7694a55277b70cd662de05ed8a957685959c Mon Sep 17 00:00:00 2001
From: "ling.ma@intel.com" <ling.ma@intel.com>
Date: Thu, 25 Jun 2009 11:55:57 +0800
Subject: drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_crt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index af26028c2514..954b8599fc76 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -46,7 +46,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 
 	temp = I915_READ(reg);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp |= ADPA_DAC_ENABLE;
+	temp &= ~ADPA_DAC_ENABLE;
 
 	switch(mode) {
 	case DRM_MODE_DPMS_ON:
-- 
cgit v1.2.3


From b5323599af68caa2da08b7041400b62049afb91e Mon Sep 17 00:00:00 2001
From: Ben Gamari <bgamari.foss@gmail.com>
Date: Wed, 1 Jul 2009 15:01:34 -0400
Subject: drm/i915: Remove gtt_bound from drm_i915_gem_object

This wasn't even used as far as I could tell and will only confuse
people (like me).

Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9aa3263c56dc..9d6889799d01 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -489,9 +489,6 @@ struct drm_i915_gem_object {
 	 */
 	int fence_reg;
 
-	/** Boolean whether this object has a valid gtt offset. */
-	int gtt_bound;
-
 	/** How many users have pinned this object in GTT space */
 	int pin_count;
 
-- 
cgit v1.2.3


From a01c75b338d7c743a8982011f01a4714ad2956de Mon Sep 17 00:00:00 2001
From: Ben Gamari <bgamari.foss@gmail.com>
Date: Wed, 1 Jul 2009 15:01:35 -0400
Subject: drm/i915: Add gtt_offset to gem object list debugfs output

This is quite useful for verifying that objects are actually mapped when
they need to be.

Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem_debugfs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index cacae945338b..a61d656cfd21 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -104,7 +104,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 		if (obj->name)
 			seq_printf(m, " (name: %d)", obj->name);
 		if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
-			seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg);
+			seq_printf(m, " (fence: %d)", obj_priv->fence_reg);
+		if (obj_priv->gtt_space != NULL)
+			seq_printf(m, " (gtt_offset: %08x)", obj_priv->gtt_offset);
+
 		seq_printf(m, "\n");
 	}
 
-- 
cgit v1.2.3


From a17458fc9d9edc98b7c5865cdc42681cf9059f1c Mon Sep 17 00:00:00 2001
From: Ben Gamari <bgamari.foss@gmail.com>
Date: Wed, 1 Jul 2009 15:01:36 -0400
Subject: drm/i915: Move lock to more reasonable location

Make this consistent with the unlock statement. Also fix a
minor typo in debugfs formatting

Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem_debugfs.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index a61d656cfd21..9a44bfcb8139 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -75,11 +75,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 	case ACTIVE_LIST:
 		seq_printf(m, "Active:\n");
 		lock = &dev_priv->mm.active_list_lock;
-		spin_lock(lock);
 		head = &dev_priv->mm.active_list;
 		break;
 	case INACTIVE_LIST:
-		seq_printf(m, "Inctive:\n");
+		seq_printf(m, "Inactive:\n");
 		head = &dev_priv->mm.inactive_list;
 		break;
 	case FLUSHING_LIST:
@@ -91,6 +90,8 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 		return 0;
 	}
 
+	if (lock)
+		spin_lock(lock);
 	list_for_each_entry(obj_priv, head, list)
 	{
 		struct drm_gem_object *obj = obj_priv->obj;
-- 
cgit v1.2.3


From e99da35f060f9a3407f7def474a1df31f3b8643a Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Fri, 26 Jun 2009 09:46:18 +0800
Subject: drm/i915: Check the LID device to decide whether the LVDS should be
 initialized

On some boxes the mobile chipset is used and there is no LVDS device. In such
case we had better not initialize the LVDS output device so that one pipe can
be used for other output device. For example: E-TOP.

But unfortunately the LVDS device is still initialized on the boxes based on
mobile chipset in KMS mode. It brings that this pipe occupied by LVDS can't be
used for other output device.

After checking the acpidump we find that there is no LID device on such boxes.
In such case we can use the LID device to decide whether the LVDS device should
be initialized.

If there is no LID device, we can think that there is no LVDS device. It is
unnecessary to initialize the LVDS output device.
If there exists the LID device, it will continue the current flowchart.

Maybe on some boxes there is no LVDS device but the LID device is found. In
such case it should be added to the quirk list.

http://bugs.freedesktop.org/show_bug.cgi?id=21496
http://bugs.freedesktop.org/show_bug.cgi?id=21856
http://bugs.freedesktop.org/show_bug.cgi?id=21127

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: squashed in style fixups]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_lvds.c | 70 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f65044b1647b..9ab38efffecf 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -36,6 +36,7 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include <linux/acpi.h>
 
 #define I915_LVDS "i915_lvds"
 
@@ -788,6 +789,65 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	{ }	/* terminating entry */
 };
 
+#ifdef CONFIG_ACPI
+/*
+ * check_lid_device -- check whether @handle is an ACPI LID device.
+ * @handle: ACPI device handle
+ * @level : depth in the ACPI namespace tree
+ * @context: the number of LID device when we find the device
+ * @rv: a return value to fill if desired (Not use)
+ */
+static acpi_status
+check_lid_device(acpi_handle handle, u32 level, void *context,
+			void **return_value)
+{
+	struct acpi_device *acpi_dev;
+	int *lid_present = context;
+
+	acpi_dev = NULL;
+	/* Get the acpi device for device handle */
+	if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
+		/* If there is no ACPI device for handle, return */
+		return AE_OK;
+	}
+
+	if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
+		*lid_present = 1;
+
+	return AE_OK;
+}
+
+/**
+ * check whether there exists the ACPI LID device by enumerating the ACPI
+ * device tree.
+ */
+static int intel_lid_present(void)
+{
+	int lid_present = 0;
+
+	if (acpi_disabled) {
+		/* If ACPI is disabled, there is no ACPI device tree to
+		 * check, so assume the LID device would have been present.
+		 */
+		return 1;
+	}
+
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				ACPI_UINT32_MAX,
+				check_lid_device, &lid_present, NULL);
+
+	return lid_present;
+}
+#else
+static int intel_lid_present(void)
+{
+	/* In the absence of ACPI built in, assume that the LID device would
+	 * have been present.
+	 */
+	return 1;
+}
+#endif
+
 /**
  * intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -811,6 +871,16 @@ void intel_lvds_init(struct drm_device *dev)
 	if (dmi_check_system(intel_no_lvds))
 		return;
 
+	/* Assume that any device without an ACPI LID device also doesn't
+	 * have an integrated LVDS.  We would be better off parsing the BIOS
+	 * to get a reliable indicator, but that code isn't written yet.
+	 *
+	 * In the case of all-in-one desktops using LVDS that we've seen,
+	 * they're using SDVO LVDS.
+	 */
+	if (!intel_lid_present())
+		return;
+
 	if (IS_IGDNG(dev)) {
 		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
 			return;
-- 
cgit v1.2.3


From 2a34f5e6b61c7e8f3b6f25847bcda88511b0ead4 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Thu, 2 Jul 2009 09:30:50 -0700
Subject: drm/i915: Disable GEM when a broken video BIOS takes up the whole
 aperture.

This is seen on some G41 systems, where the BIOS will consume all but
a few KB of the aperture.  This should be bad for all operating systems, as
it means that the OS can't dynamically manage memory between graphics and
the rest of the system, and OSes that did static memory management
statically add memory in addition to the BIOS allocation anyway.  So, instead
of working around it, just fail out verbosely.

fd.o bug #21574

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
---
 drivers/gpu/drm/i915/i915_dma.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0e704bb26e99..8c4783180bf6 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -885,8 +885,8 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
  * some RAM for the framebuffer at early boot.  This code figures out
  * how much was set aside so we can use it for our own purposes.
  */
-static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
-			  unsigned long *preallocated_size)
+static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
+			  uint32_t *preallocated_size)
 {
 	struct pci_dev *bridge_dev;
 	u16 tmp = 0;
@@ -984,10 +984,11 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
 	return 0;
 }
 
-static int i915_load_modeset_init(struct drm_device *dev)
+static int i915_load_modeset_init(struct drm_device *dev,
+				  unsigned long prealloc_size,
+				  unsigned long agp_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long agp_size, prealloc_size;
 	int fb_bar = IS_I9XX(dev) ? 2 : 0;
 	int ret = 0;
 
@@ -1002,10 +1003,6 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (IS_I965G(dev) || IS_G33(dev))
 		dev_priv->cursor_needs_physical = false;
 
-	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
-	if (ret)
-		goto out;
-
 	/* Basic memrange allocator for stolen space (aka vram) */
 	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
 
@@ -1136,6 +1133,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	resource_size_t base, size;
 	int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+	uint32_t agp_size, prealloc_size;
 
 	/* i915 has 4 more counters */
 	dev->counters += 4;
@@ -1184,9 +1182,22 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 			 "performance may suffer.\n");
 	}
 
+	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
+	if (ret)
+		goto out_iomapfree;
+
 	/* enable GEM by default */
 	dev_priv->has_gem = 1;
 
+	if (prealloc_size > agp_size * 3 / 4) {
+		DRM_ERROR("Detected broken video BIOS with %d/%dkB of video "
+			  "memory stolen.\n",
+			  prealloc_size / 1024, agp_size / 1024);
+		DRM_ERROR("Disabling GEM. (try reducing stolen memory or "
+			  "updating the BIOS to fix).\n");
+		dev_priv->has_gem = 0;
+	}
+
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || IS_IGDNG(dev)) {
@@ -1231,7 +1242,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = i915_load_modeset_init(dev);
+		ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
 		if (ret < 0) {
 			DRM_ERROR("failed to init modeset\n");
 			goto out_rmmap;
-- 
cgit v1.2.3


From 883e860daf5c75a0035c33cb6f8881ee62d6efaf Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 10 Jul 2009 12:28:30 -0700
Subject: drm/i915: Fix harmless warning from patch merged after i2c rework.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_crt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 954b8599fc76..d6a1a6e5539a 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -430,7 +430,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 {
 	int ret;
 	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_i2c_chan *ddcbus;
+	struct i2c_adapter *ddcbus;
 	struct drm_device *dev = connector->dev;
 
 
-- 
cgit v1.2.3


From 354ff96772540d2e836194bf14dd9c05c274055c Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Wed, 8 Jul 2009 14:13:12 +0800
Subject: drm/i915: Restore the KMS modeset for every activated CRTC

Restore the modeset for every activated CRTC in course of resume.
This is realized by calling the function of drm_helper_resume_force_mode.
Note: it is meaningful only for the KMS mode.

https://bugs.freedesktop.org/show_bug.cgi?id=21719
https://bugs.freedesktop.org/show_bug.cgi?id=21708
https://bugs.freedesktop.org/show_bug.cgi?id=22285
https://bugs.freedesktop.org/show_bug.cgi?id=22263

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index aef2a261a837..fc4b68aa2d05 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -35,6 +35,7 @@
 
 #include "drm_pciids.h"
 #include <linux/console.h>
+#include "drm_crtc_helper.h"
 
 static unsigned int i915_modeset = -1;
 module_param_named(modeset, i915_modeset, int, 0400);
@@ -115,6 +116,10 @@ static int i915_resume(struct drm_device *dev)
 
 		drm_irq_install(dev);
 	}
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		/* Resume the modeset for every activated CRTC */
+		drm_helper_resume_force_mode(dev);
+	}
 
 	return ret;
 }
-- 
cgit v1.2.3


From af4fcb574efa90373b02ae0bb8b54d710c32eeb4 Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Wed, 8 Jul 2009 14:13:13 +0800
Subject: drm: Disable the unused connectors explicitly when resuming with KMS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by:  Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by:  Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/drm_crtc_helper.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index a6f73f1e99d9..3da9cfa31848 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -1090,6 +1090,8 @@ int drm_helper_resume_force_mode(struct drm_device *dev)
 		if (ret == false)
 			DRM_ERROR("failed to set mode on crtc %p\n", crtc);
 	}
+	/* disable the unused connectors while restoring the modesetting */
+	drm_helper_disable_unused_functions(dev);
 	return 0;
 }
 EXPORT_SYMBOL(drm_helper_resume_force_mode);
-- 
cgit v1.2.3


From fccdaba4317604602e5802c3afc4021f2fb8132e Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Wed, 8 Jul 2009 14:13:14 +0800
Subject: drm/i915: Avoid saving/restore the modesetting registers twice in KMS
 mode

In KMS mode we now use the normal mode-setting paths to set the modes
back to the current configuration, so we don't need to also run the more
limited non-KMS implementation of modesetting for resume.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_suspend.c | 221 ++++++++++++++++++++----------------
 1 file changed, 121 insertions(+), 100 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 8d8e083d14ab..9e1d16e5c3ea 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -222,23 +222,12 @@ static void i915_restore_vga(struct drm_device *dev)
 	I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
 }
 
-int i915_save_state(struct drm_device *dev)
+static void i915_save_modeset_reg(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int i;
-
-	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
-
-	/* Render Standby */
-	if (IS_I965G(dev) && IS_MOBILE(dev))
-		dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-
-	/* Hardware status page */
-	dev_priv->saveHWS = I915_READ(HWS_PGA);
-
-	/* Display arbitration control */
-	dev_priv->saveDSPARB = I915_READ(DSPARB);
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
 	/* Pipe & plane A info */
 	dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
 	dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
@@ -294,7 +283,122 @@ int i915_save_state(struct drm_device *dev)
 	}
 	i915_save_palette(dev, PIPE_B);
 	dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
+	return;
+}
+static void i915_restore_modeset_reg(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	/* Pipe & plane A info */
+	/* Prime the clock */
+	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
+		I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+			   ~DPLL_VCO_ENABLE);
+		DRM_UDELAY(150);
+	}
+	I915_WRITE(FPA0, dev_priv->saveFPA0);
+	I915_WRITE(FPA1, dev_priv->saveFPA1);
+	/* Actually enable it */
+	I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+	DRM_UDELAY(150);
+	if (IS_I965G(dev))
+		I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
+	DRM_UDELAY(150);
+
+	/* Restore mode */
+	I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
+	I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
+	I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
+	I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
+	I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
+	I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
+	I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+	/* Restore plane info */
+	I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
+	I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
+	I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
+	I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR);
+	I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
+	if (IS_I965G(dev)) {
+		I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
+		I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
+	}
+
+	I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
+
+	i915_restore_palette(dev, PIPE_A);
+	/* Enable the plane */
+	I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
+	I915_WRITE(DSPAADDR, I915_READ(DSPAADDR));
+
+	/* Pipe & plane B info */
+	if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
+		I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+			   ~DPLL_VCO_ENABLE);
+		DRM_UDELAY(150);
+	}
+	I915_WRITE(FPB0, dev_priv->saveFPB0);
+	I915_WRITE(FPB1, dev_priv->saveFPB1);
+	/* Actually enable it */
+	I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+	DRM_UDELAY(150);
+	if (IS_I965G(dev))
+		I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
+	DRM_UDELAY(150);
+
+	/* Restore mode */
+	I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
+	I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
+	I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
+	I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
+	I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
+	I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
+	I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+	/* Restore plane info */
+	I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
+	I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
+	I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
+	I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR);
+	I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
+	if (IS_I965G(dev)) {
+		I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
+		I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
+	}
+
+	I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
+
+	i915_restore_palette(dev, PIPE_B);
+	/* Enable the plane */
+	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
+	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	return;
+}
+int i915_save_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+	/* Render Standby */
+	if (IS_I965G(dev) && IS_MOBILE(dev))
+		dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
+	/* Hardware status page */
+	dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+	/* Display arbitration control */
+	dev_priv->saveDSPARB = I915_READ(DSPARB);
+
+	/* This is only meaningful in non-KMS mode */
+	/* Don't save them in KMS mode */
+	i915_save_modeset_reg(dev);
 	/* Cursor state */
 	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
 	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
@@ -430,92 +534,9 @@ int i915_restore_state(struct drm_device *dev)
 		I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
 		I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
 	}
-	
-	/* Pipe & plane A info */
-	/* Prime the clock */
-	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
-		I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
-			   ~DPLL_VCO_ENABLE);
-		DRM_UDELAY(150);
-	}
-	I915_WRITE(FPA0, dev_priv->saveFPA0);
-	I915_WRITE(FPA1, dev_priv->saveFPA1);
-	/* Actually enable it */
-	I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
-	DRM_UDELAY(150);
-	if (IS_I965G(dev))
-		I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
-	DRM_UDELAY(150);
-
-	/* Restore mode */
-	I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
-	I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
-	I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
-	I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
-	I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
-	I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
-	I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
-
-	/* Restore plane info */
-	I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
-	I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
-	I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
-	I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR);
-	I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
-	if (IS_I965G(dev)) {
-		I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
-		I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
-	}
-
-	I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
-
-	i915_restore_palette(dev, PIPE_A);
-	/* Enable the plane */
-	I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
-	I915_WRITE(DSPAADDR, I915_READ(DSPAADDR));
-
-	/* Pipe & plane B info */
-	if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
-		I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
-			   ~DPLL_VCO_ENABLE);
-		DRM_UDELAY(150);
-	}
-	I915_WRITE(FPB0, dev_priv->saveFPB0);
-	I915_WRITE(FPB1, dev_priv->saveFPB1);
-	/* Actually enable it */
-	I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
-	DRM_UDELAY(150);
-	if (IS_I965G(dev))
-		I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
-	DRM_UDELAY(150);
-
-	/* Restore mode */
-	I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
-	I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
-	I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
-	I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
-	I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
-	I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
-	I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
-
-	/* Restore plane info */
-	I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
-	I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
-	I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
-	I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR);
-	I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
-	if (IS_I965G(dev)) {
-		I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
-		I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
-	}
-
-	I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
-
-	i915_restore_palette(dev, PIPE_B);
-	/* Enable the plane */
-	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
-	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
-
+	/* This is only meaningful in non-KMS mode */
+	/* Don't restore them in KMS mode */
+	i915_restore_modeset_reg(dev);
 	/* Cursor state */
 	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
 	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
-- 
cgit v1.2.3


From 901782b21ecb2af4dde1598b3142bf0e80b20853 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri, 10 Jul 2009 08:18:50 +0100
Subject: drm/i915: Refactor calls to unmap_mapping_range

As we call unmap_mapping_range() twice in identical fashion, refactor
and attempt to explain why we need to call unmap_mapping_range().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 876b65cb7629..08d8e5d85955 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1252,6 +1252,31 @@ out_free_list:
 	return ret;
 }
 
+/**
+ * i915_gem_release_mmap - remove physical page mappings
+ * @obj: obj in question
+ *
+ * Preserve the reservation of the mmaping with the DRM core code, but
+ * relinquish ownership of the pages back to the system.
+ *
+ * It is vital that we remove the page mapping if we have mapped a tiled
+ * object through the GTT and then lose the fence register due to
+ * resource pressure. Similarly if the object has been moved out of the
+ * aperture, than pages mapped into userspace must be revoked. Removing the
+ * mapping will then trigger a page fault on the next user access, allowing
+ * fixup by i915_gem_fault().
+ */
+static void
+i915_gem_release_mmap(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	if (dev->dev_mapping)
+		unmap_mapping_range(dev->dev_mapping,
+				    obj_priv->mmap_offset, obj->size, 1);
+}
+
 static void
 i915_gem_free_mmap_offset(struct drm_gem_object *obj)
 {
@@ -1861,7 +1886,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
-	loff_t offset;
 	int ret = 0;
 
 #if WATCH_BUF
@@ -1898,9 +1922,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 	BUG_ON(obj_priv->active);
 
 	/* blow away mappings if mapped through GTT */
-	offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT;
-	if (dev->dev_mapping)
-		unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
+	i915_gem_release_mmap(obj);
 
 	if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
 		i915_gem_clear_fence_reg(obj);
@@ -2222,7 +2244,6 @@ try_again:
 	/* None available, try to steal one or wait for a user to finish */
 	if (i == dev_priv->num_fence_regs) {
 		uint32_t seqno = dev_priv->mm.next_gem_seqno;
-		loff_t offset;
 
 		if (avail == 0)
 			return -ENOSPC;
@@ -2274,10 +2295,7 @@ try_again:
 		 * Zap this virtual mapping so we can set up a fence again
 		 * for this object next time we need it.
 		 */
-		offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT;
-		if (dev->dev_mapping)
-			unmap_mapping_range(dev->dev_mapping, offset,
-					    reg->obj->size, 1);
+		i915_gem_release_mmap(reg->obj);
 		old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
 	}
 
-- 
cgit v1.2.3


From d05ca301997c94c2ef3c112b15319d13fa8cddab Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 10 Jul 2009 13:02:26 -0700
Subject: drm/i915: Zap the GTT mapping when transitioning from untiled to
 tiled.

As of 52dc7d32b88156248167864f77a9026abe27b432, we could leave an old
linear GTT mapping in place, so that apps trying to GTT-mapped write in
tiled data wouldn't get the fence added, and garbage would get displayed.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h        | 1 +
 drivers/gpu/drm/i915/i915_gem.c        | 2 +-
 drivers/gpu/drm/i915/i915_gem_tiling.c | 6 ++++++
 3 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9d6889799d01..d08752875885 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -673,6 +673,7 @@ void i915_gem_free_object(struct drm_gem_object *obj);
 int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
 void i915_gem_object_unpin(struct drm_gem_object *obj);
 int i915_gem_object_unbind(struct drm_gem_object *obj);
+void i915_gem_release_mmap(struct drm_gem_object *obj);
 void i915_gem_lastclose(struct drm_device *dev);
 uint32_t i915_get_gem_seqno(struct drm_device *dev);
 int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 08d8e5d85955..5bf420378b6d 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1266,7 +1266,7 @@ out_free_list:
  * mapping will then trigger a page fault on the next user access, allowing
  * fixup by i915_gem_fault().
  */
-static void
+void
 i915_gem_release_mmap(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index daeae62e1c28..a2d527b22ec4 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -521,6 +521,12 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 			goto err;
 		}
 
+		/* If we've changed tiling, GTT-mappings of the object
+		 * need to re-fault to ensure that the correct fence register
+		 * setup is in place.
+		 */
+		i915_gem_release_mmap(obj);
+
 		obj_priv->tiling_mode = args->tiling_mode;
 		obj_priv->stride = args->stride;
 	}
-- 
cgit v1.2.3


From 5019914ca3b7517b2d82db2e92e3f683ac48e535 Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyu.z.wang@intel.com>
Date: Fri, 10 Jul 2009 14:39:59 +0800
Subject: drm/i915: Fix for LVDS VBT change on IGDNG

IGDNG mobile chip's LVDS data block removes panel fitting
register definition. So this fixes offset for LVDS timing
block parsing. Thanks for Michael Fu to catch this.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_bios.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index da22863c05c0..7cc447191028 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -97,6 +97,7 @@ static void
 parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 			    struct bdb_header *bdb)
 {
+	struct drm_device *dev = dev_priv->dev;
 	struct bdb_lvds_options *lvds_options;
 	struct bdb_lvds_lfp_data *lvds_lfp_data;
 	struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
@@ -132,7 +133,14 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 	entry = (struct bdb_lvds_lfp_data_entry *)
 		((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
 						   lvds_options->panel_type));
-	dvo_timing = &entry->dvo_timing;
+
+	/* On IGDNG mobile, LVDS data block removes panel fitting registers.
+	   So dec 2 dword from dvo_timing offset */
+	if (IS_IGDNG(dev))
+		dvo_timing = (struct lvds_dvo_timing *)
+					((u8 *)&entry->dvo_timing - 8);
+	else
+		dvo_timing = &entry->dvo_timing;
 
 	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
 
-- 
cgit v1.2.3