From b617be33502d2bfefffef71924c7a7ba50264ff6 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 11 Apr 2022 21:45:27 +0300 Subject: spi: add SPI_RX_CPHA_FLIP mode bit Some SPI devices latch MOSI bits on one clock phase, but produce valid MISO bits on the other phase. Add SPI_RX_CPHA_FLIP mode to instruct the controller driver to flip CPHA for Rx (MISO) only transfers. Signed-off-by: Baruch Siach Link: https://lore.kernel.org/r/a715ca92713ca02071f33dcca9960a66a03c949a.1649702729.git.baruch@tkos.co.il Signed-off-by: Mark Brown --- include/uapi/linux/spi/spi.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux/spi') diff --git a/include/uapi/linux/spi/spi.h b/include/uapi/linux/spi/spi.h index 236a85f08ded..9d5f58059703 100644 --- a/include/uapi/linux/spi/spi.h +++ b/include/uapi/linux/spi/spi.h @@ -27,6 +27,7 @@ #define SPI_TX_OCTAL _BITUL(13) /* transmit with 8 wires */ #define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */ #define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */ +#define SPI_RX_CPHA_FLIP _BITUL(16) /* flip CPHA on Rx only xfer */ /* * All the bits defined above should be covered by SPI_MODE_USER_MASK. @@ -36,6 +37,6 @@ * These bits must not overlap. A static assert check should make sure of that. * If adding extra bits, make sure to increase the bit index below as well. */ -#define SPI_MODE_USER_MASK (_BITUL(16) - 1) +#define SPI_MODE_USER_MASK (_BITUL(17) - 1) #endif /* _UAPI_SPI_H */ -- cgit v1.2.3