From dd11376b9f1b73aca3f8c6eb541486bbb6996f05 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 11 May 2022 14:25:52 -0700 Subject: scsi: ufs: Split the drivers/scsi/ufs directory Split the drivers/scsi/ufs directory into 'core' and 'host' directories under the drivers/ufs/ directory. Move shared header files into the include/ufs/ directory. This separation makes it clear which header files UFS drivers are allowed to include (include/ufs/*.h) and which header files UFS drivers are not allowed to include (drivers/ufs/core/*.h). Update the MAINTAINERS file. Add myself as a UFS reviewer. Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org Cc: Adrian Hunter Cc: Avri Altman Cc: Bean Huo Cc: Bjorn Andersson Cc: Keoseong Park Tested-by: Bean Huo Tested-by: Adrian Hunter Reviewed-by: Bean Huo Acked-by: Avri Altman Acked-by: Adrian Hunter Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- include/ufs/ufs.h | 623 +++++++++++++++++++++++ include/ufs/ufs_quirks.h | 116 +++++ include/ufs/ufshcd.h | 1230 ++++++++++++++++++++++++++++++++++++++++++++++ include/ufs/ufshci.h | 510 +++++++++++++++++++ include/ufs/unipro.h | 316 ++++++++++++ 5 files changed, 2795 insertions(+) create mode 100644 include/ufs/ufs.h create mode 100644 include/ufs/ufs_quirks.h create mode 100644 include/ufs/ufshcd.h create mode 100644 include/ufs/ufshci.h create mode 100644 include/ufs/unipro.h (limited to 'include/ufs') diff --git a/include/ufs/ufs.h b/include/ufs/ufs.h new file mode 100644 index 000000000000..1bba3fead2ce --- /dev/null +++ b/include/ufs/ufs.h @@ -0,0 +1,623 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Universal Flash Storage Host controller driver + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti + */ + +#ifndef _UFS_H +#define _UFS_H + +#include +#include +#include + +#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req)) +#define QUERY_DESC_MAX_SIZE 255 +#define QUERY_DESC_MIN_SIZE 2 +#define QUERY_DESC_HDR_SIZE 2 +#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \ + (sizeof(struct utp_upiu_header))) +#define UFS_SENSE_SIZE 18 + +#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ + cpu_to_be32((byte3 << 24) | (byte2 << 16) |\ + (byte1 << 8) | (byte0)) +/* + * UFS device may have standard LUs and LUN id could be from 0x00 to + * 0x7F. Standard LUs use "Peripheral Device Addressing Format". + * UFS device may also have the Well Known LUs (also referred as W-LU) + * which again could be from 0x00 to 0x7F. For W-LUs, device only use + * the "Extended Addressing Format" which means the W-LUNs would be + * from 0xc100 (SCSI_W_LUN_BASE) onwards. + * This means max. LUN number reported from UFS device could be 0xC17F. + */ +#define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F +#define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID) +#define UFS_UPIU_WLUN_ID (1 << 7) +#define UFS_RPMB_UNIT 0xC4 + +/* WriteBooster buffer is available only for the logical unit from 0 to 7 */ +#define UFS_UPIU_MAX_WB_LUN_ID 8 + +/* + * WriteBooster buffer lifetime has a limit setted by vendor. + * If it is over the limit, WriteBooster feature will be disabled. + */ +#define UFS_WB_EXCEED_LIFETIME 0x0B + +/* Well known logical unit id in LUN field of UPIU */ +enum { + UFS_UPIU_REPORT_LUNS_WLUN = 0x81, + UFS_UPIU_UFS_DEVICE_WLUN = 0xD0, + UFS_UPIU_BOOT_WLUN = 0xB0, + UFS_UPIU_RPMB_WLUN = 0xC4, +}; + +/* + * UFS Protocol Information Unit related definitions + */ + +/* Task management functions */ +enum { + UFS_ABORT_TASK = 0x01, + UFS_ABORT_TASK_SET = 0x02, + UFS_CLEAR_TASK_SET = 0x04, + UFS_LOGICAL_RESET = 0x08, + UFS_QUERY_TASK = 0x80, + UFS_QUERY_TASK_SET = 0x81, +}; + +/* UTP UPIU Transaction Codes Initiator to Target */ +enum { + UPIU_TRANSACTION_NOP_OUT = 0x00, + UPIU_TRANSACTION_COMMAND = 0x01, + UPIU_TRANSACTION_DATA_OUT = 0x02, + UPIU_TRANSACTION_TASK_REQ = 0x04, + UPIU_TRANSACTION_QUERY_REQ = 0x16, +}; + +/* UTP UPIU Transaction Codes Target to Initiator */ +enum { + UPIU_TRANSACTION_NOP_IN = 0x20, + UPIU_TRANSACTION_RESPONSE = 0x21, + UPIU_TRANSACTION_DATA_IN = 0x22, + UPIU_TRANSACTION_TASK_RSP = 0x24, + UPIU_TRANSACTION_READY_XFER = 0x31, + UPIU_TRANSACTION_QUERY_RSP = 0x36, + UPIU_TRANSACTION_REJECT_UPIU = 0x3F, +}; + +/* UPIU Read/Write flags */ +enum { + UPIU_CMD_FLAGS_NONE = 0x00, + UPIU_CMD_FLAGS_WRITE = 0x20, + UPIU_CMD_FLAGS_READ = 0x40, +}; + +/* UPIU Task Attributes */ +enum { + UPIU_TASK_ATTR_SIMPLE = 0x00, + UPIU_TASK_ATTR_ORDERED = 0x01, + UPIU_TASK_ATTR_HEADQ = 0x02, + UPIU_TASK_ATTR_ACA = 0x03, +}; + +/* UPIU Query request function */ +enum { + UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01, + UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81, +}; + +/* Flag idn for Query Requests*/ +enum flag_idn { + QUERY_FLAG_IDN_FDEVICEINIT = 0x01, + QUERY_FLAG_IDN_PERMANENT_WPE = 0x02, + QUERY_FLAG_IDN_PWR_ON_WPE = 0x03, + QUERY_FLAG_IDN_BKOPS_EN = 0x04, + QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05, + QUERY_FLAG_IDN_PURGE_ENABLE = 0x06, + QUERY_FLAG_IDN_RESERVED2 = 0x07, + QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08, + QUERY_FLAG_IDN_BUSY_RTC = 0x09, + QUERY_FLAG_IDN_RESERVED3 = 0x0A, + QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B, + QUERY_FLAG_IDN_WB_EN = 0x0E, + QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN = 0x0F, + QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8 = 0x10, + QUERY_FLAG_IDN_HPB_RESET = 0x11, + QUERY_FLAG_IDN_HPB_EN = 0x12, +}; + +/* Attribute idn for Query requests */ +enum attr_idn { + QUERY_ATTR_IDN_BOOT_LU_EN = 0x00, + QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD = 0x01, + QUERY_ATTR_IDN_POWER_MODE = 0x02, + QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03, + QUERY_ATTR_IDN_OOO_DATA_EN = 0x04, + QUERY_ATTR_IDN_BKOPS_STATUS = 0x05, + QUERY_ATTR_IDN_PURGE_STATUS = 0x06, + QUERY_ATTR_IDN_MAX_DATA_IN = 0x07, + QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08, + QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09, + QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A, + QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B, + QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C, + QUERY_ATTR_IDN_EE_CONTROL = 0x0D, + QUERY_ATTR_IDN_EE_STATUS = 0x0E, + QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F, + QUERY_ATTR_IDN_CNTX_CONF = 0x10, + QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11, + QUERY_ATTR_IDN_RESERVED2 = 0x12, + QUERY_ATTR_IDN_RESERVED3 = 0x13, + QUERY_ATTR_IDN_FFU_STATUS = 0x14, + QUERY_ATTR_IDN_PSA_STATE = 0x15, + QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16, + QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME = 0x17, + QUERY_ATTR_IDN_CASE_ROUGH_TEMP = 0x18, + QUERY_ATTR_IDN_HIGH_TEMP_BOUND = 0x19, + QUERY_ATTR_IDN_LOW_TEMP_BOUND = 0x1A, + QUERY_ATTR_IDN_WB_FLUSH_STATUS = 0x1C, + QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE = 0x1D, + QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST = 0x1E, + QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE = 0x1F, +}; + +/* Descriptor idn for Query requests */ +enum desc_idn { + QUERY_DESC_IDN_DEVICE = 0x0, + QUERY_DESC_IDN_CONFIGURATION = 0x1, + QUERY_DESC_IDN_UNIT = 0x2, + QUERY_DESC_IDN_RFU_0 = 0x3, + QUERY_DESC_IDN_INTERCONNECT = 0x4, + QUERY_DESC_IDN_STRING = 0x5, + QUERY_DESC_IDN_RFU_1 = 0x6, + QUERY_DESC_IDN_GEOMETRY = 0x7, + QUERY_DESC_IDN_POWER = 0x8, + QUERY_DESC_IDN_HEALTH = 0x9, + QUERY_DESC_IDN_MAX, +}; + +enum desc_header_offset { + QUERY_DESC_LENGTH_OFFSET = 0x00, + QUERY_DESC_DESC_TYPE_OFFSET = 0x01, +}; + +/* Unit descriptor parameters offsets in bytes*/ +enum unit_desc_param { + UNIT_DESC_PARAM_LEN = 0x0, + UNIT_DESC_PARAM_TYPE = 0x1, + UNIT_DESC_PARAM_UNIT_INDEX = 0x2, + UNIT_DESC_PARAM_LU_ENABLE = 0x3, + UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4, + UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5, + UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6, + UNIT_DESC_PARAM_PSA_SENSITIVE = 0x7, + UNIT_DESC_PARAM_MEM_TYPE = 0x8, + UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9, + UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA, + UNIT_DESC_PARAM_LOGICAL_BLK_COUNT = 0xB, + UNIT_DESC_PARAM_ERASE_BLK_SIZE = 0x13, + UNIT_DESC_PARAM_PROVISIONING_TYPE = 0x17, + UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18, + UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20, + UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22, + UNIT_DESC_PARAM_HPB_LU_MAX_ACTIVE_RGNS = 0x23, + UNIT_DESC_PARAM_HPB_PIN_RGN_START_OFF = 0x25, + UNIT_DESC_PARAM_HPB_NUM_PIN_RGNS = 0x27, + UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS = 0x29, +}; + +/* Device descriptor parameters offsets in bytes*/ +enum device_desc_param { + DEVICE_DESC_PARAM_LEN = 0x0, + DEVICE_DESC_PARAM_TYPE = 0x1, + DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2, + DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3, + DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4, + DEVICE_DESC_PARAM_PRTCL = 0x5, + DEVICE_DESC_PARAM_NUM_LU = 0x6, + DEVICE_DESC_PARAM_NUM_WLU = 0x7, + DEVICE_DESC_PARAM_BOOT_ENBL = 0x8, + DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9, + DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA, + DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB, + DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC, + DEVICE_DESC_PARAM_SEC_LU = 0xD, + DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE, + DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF, + DEVICE_DESC_PARAM_SPEC_VER = 0x10, + DEVICE_DESC_PARAM_MANF_DATE = 0x12, + DEVICE_DESC_PARAM_MANF_NAME = 0x14, + DEVICE_DESC_PARAM_PRDCT_NAME = 0x15, + DEVICE_DESC_PARAM_SN = 0x16, + DEVICE_DESC_PARAM_OEM_ID = 0x17, + DEVICE_DESC_PARAM_MANF_ID = 0x18, + DEVICE_DESC_PARAM_UD_OFFSET = 0x1A, + DEVICE_DESC_PARAM_UD_LEN = 0x1B, + DEVICE_DESC_PARAM_RTT_CAP = 0x1C, + DEVICE_DESC_PARAM_FRQ_RTC = 0x1D, + DEVICE_DESC_PARAM_UFS_FEAT = 0x1F, + DEVICE_DESC_PARAM_FFU_TMT = 0x20, + DEVICE_DESC_PARAM_Q_DPTH = 0x21, + DEVICE_DESC_PARAM_DEV_VER = 0x22, + DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24, + DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25, + DEVICE_DESC_PARAM_PSA_TMT = 0x29, + DEVICE_DESC_PARAM_PRDCT_REV = 0x2A, + DEVICE_DESC_PARAM_HPB_VER = 0x40, + DEVICE_DESC_PARAM_HPB_CONTROL = 0x42, + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP = 0x4F, + DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN = 0x53, + DEVICE_DESC_PARAM_WB_TYPE = 0x54, + DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55, +}; + +/* Interconnect descriptor parameters offsets in bytes*/ +enum interconnect_desc_param { + INTERCONNECT_DESC_PARAM_LEN = 0x0, + INTERCONNECT_DESC_PARAM_TYPE = 0x1, + INTERCONNECT_DESC_PARAM_UNIPRO_VER = 0x2, + INTERCONNECT_DESC_PARAM_MPHY_VER = 0x4, +}; + +/* Geometry descriptor parameters offsets in bytes*/ +enum geometry_desc_param { + GEOMETRY_DESC_PARAM_LEN = 0x0, + GEOMETRY_DESC_PARAM_TYPE = 0x1, + GEOMETRY_DESC_PARAM_DEV_CAP = 0x4, + GEOMETRY_DESC_PARAM_MAX_NUM_LUN = 0xC, + GEOMETRY_DESC_PARAM_SEG_SIZE = 0xD, + GEOMETRY_DESC_PARAM_ALLOC_UNIT_SIZE = 0x11, + GEOMETRY_DESC_PARAM_MIN_BLK_SIZE = 0x12, + GEOMETRY_DESC_PARAM_OPT_RD_BLK_SIZE = 0x13, + GEOMETRY_DESC_PARAM_OPT_WR_BLK_SIZE = 0x14, + GEOMETRY_DESC_PARAM_MAX_IN_BUF_SIZE = 0x15, + GEOMETRY_DESC_PARAM_MAX_OUT_BUF_SIZE = 0x16, + GEOMETRY_DESC_PARAM_RPMB_RW_SIZE = 0x17, + GEOMETRY_DESC_PARAM_DYN_CAP_RSRC_PLC = 0x18, + GEOMETRY_DESC_PARAM_DATA_ORDER = 0x19, + GEOMETRY_DESC_PARAM_MAX_NUM_CTX = 0x1A, + GEOMETRY_DESC_PARAM_TAG_UNIT_SIZE = 0x1B, + GEOMETRY_DESC_PARAM_TAG_RSRC_SIZE = 0x1C, + GEOMETRY_DESC_PARAM_SEC_RM_TYPES = 0x1D, + GEOMETRY_DESC_PARAM_MEM_TYPES = 0x1E, + GEOMETRY_DESC_PARAM_SCM_MAX_NUM_UNITS = 0x20, + GEOMETRY_DESC_PARAM_SCM_CAP_ADJ_FCTR = 0x24, + GEOMETRY_DESC_PARAM_NPM_MAX_NUM_UNITS = 0x26, + GEOMETRY_DESC_PARAM_NPM_CAP_ADJ_FCTR = 0x2A, + GEOMETRY_DESC_PARAM_ENM1_MAX_NUM_UNITS = 0x2C, + GEOMETRY_DESC_PARAM_ENM1_CAP_ADJ_FCTR = 0x30, + GEOMETRY_DESC_PARAM_ENM2_MAX_NUM_UNITS = 0x32, + GEOMETRY_DESC_PARAM_ENM2_CAP_ADJ_FCTR = 0x36, + GEOMETRY_DESC_PARAM_ENM3_MAX_NUM_UNITS = 0x38, + GEOMETRY_DESC_PARAM_ENM3_CAP_ADJ_FCTR = 0x3C, + GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS = 0x3E, + GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR = 0x42, + GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE = 0x44, + GEOMETRY_DESC_PARAM_HPB_REGION_SIZE = 0x48, + GEOMETRY_DESC_PARAM_HPB_NUMBER_LU = 0x49, + GEOMETRY_DESC_PARAM_HPB_SUBREGION_SIZE = 0x4A, + GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS = 0x4B, + GEOMETRY_DESC_PARAM_WB_MAX_ALLOC_UNITS = 0x4F, + GEOMETRY_DESC_PARAM_WB_MAX_WB_LUNS = 0x53, + GEOMETRY_DESC_PARAM_WB_BUFF_CAP_ADJ = 0x54, + GEOMETRY_DESC_PARAM_WB_SUP_RED_TYPE = 0x55, + GEOMETRY_DESC_PARAM_WB_SUP_WB_TYPE = 0x56, +}; + +/* Health descriptor parameters offsets in bytes*/ +enum health_desc_param { + HEALTH_DESC_PARAM_LEN = 0x0, + HEALTH_DESC_PARAM_TYPE = 0x1, + HEALTH_DESC_PARAM_EOL_INFO = 0x2, + HEALTH_DESC_PARAM_LIFE_TIME_EST_A = 0x3, + HEALTH_DESC_PARAM_LIFE_TIME_EST_B = 0x4, +}; + +/* WriteBooster buffer mode */ +enum { + WB_BUF_MODE_LU_DEDICATED = 0x0, + WB_BUF_MODE_SHARED = 0x1, +}; + +/* + * Logical Unit Write Protect + * 00h: LU not write protected + * 01h: LU write protected when fPowerOnWPEn =1 + * 02h: LU permanently write protected when fPermanentWPEn =1 + */ +enum ufs_lu_wp_type { + UFS_LU_NO_WP = 0x00, + UFS_LU_POWER_ON_WP = 0x01, + UFS_LU_PERM_WP = 0x02, +}; + +/* bActiveICCLevel parameter current units */ +enum { + UFSHCD_NANO_AMP = 0, + UFSHCD_MICRO_AMP = 1, + UFSHCD_MILI_AMP = 2, + UFSHCD_AMP = 3, +}; + +/* Possible values for dExtendedUFSFeaturesSupport */ +enum { + UFS_DEV_LOW_TEMP_NOTIF = BIT(4), + UFS_DEV_HIGH_TEMP_NOTIF = BIT(5), + UFS_DEV_EXT_TEMP_NOTIF = BIT(6), + UFS_DEV_HPB_SUPPORT = BIT(7), + UFS_DEV_WRITE_BOOSTER_SUP = BIT(8), +}; +#define UFS_DEV_HPB_SUPPORT_VERSION 0x310 + +#define POWER_DESC_MAX_ACTV_ICC_LVLS 16 + +/* Attribute bActiveICCLevel parameter bit masks definitions */ +#define ATTR_ICC_LVL_UNIT_OFFSET 14 +#define ATTR_ICC_LVL_UNIT_MASK (0x3 << ATTR_ICC_LVL_UNIT_OFFSET) +#define ATTR_ICC_LVL_VALUE_MASK 0x3FF + +/* Power descriptor parameters offsets in bytes */ +enum power_desc_param_offset { + PWR_DESC_LEN = 0x0, + PWR_DESC_TYPE = 0x1, + PWR_DESC_ACTIVE_LVLS_VCC_0 = 0x2, + PWR_DESC_ACTIVE_LVLS_VCCQ_0 = 0x22, + PWR_DESC_ACTIVE_LVLS_VCCQ2_0 = 0x42, +}; + +/* Exception event mask values */ +enum { + MASK_EE_STATUS = 0xFFFF, + MASK_EE_DYNCAP_EVENT = BIT(0), + MASK_EE_SYSPOOL_EVENT = BIT(1), + MASK_EE_URGENT_BKOPS = BIT(2), + MASK_EE_TOO_HIGH_TEMP = BIT(3), + MASK_EE_TOO_LOW_TEMP = BIT(4), + MASK_EE_WRITEBOOSTER_EVENT = BIT(5), + MASK_EE_PERFORMANCE_THROTTLING = BIT(6), +}; +#define MASK_EE_URGENT_TEMP (MASK_EE_TOO_HIGH_TEMP | MASK_EE_TOO_LOW_TEMP) + +/* Background operation status */ +enum bkops_status { + BKOPS_STATUS_NO_OP = 0x0, + BKOPS_STATUS_NON_CRITICAL = 0x1, + BKOPS_STATUS_PERF_IMPACT = 0x2, + BKOPS_STATUS_CRITICAL = 0x3, + BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL, +}; + +/* UTP QUERY Transaction Specific Fields OpCode */ +enum query_opcode { + UPIU_QUERY_OPCODE_NOP = 0x0, + UPIU_QUERY_OPCODE_READ_DESC = 0x1, + UPIU_QUERY_OPCODE_WRITE_DESC = 0x2, + UPIU_QUERY_OPCODE_READ_ATTR = 0x3, + UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4, + UPIU_QUERY_OPCODE_READ_FLAG = 0x5, + UPIU_QUERY_OPCODE_SET_FLAG = 0x6, + UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7, + UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8, +}; + +/* bRefClkFreq attribute values */ +enum ufs_ref_clk_freq { + REF_CLK_FREQ_19_2_MHZ = 0, + REF_CLK_FREQ_26_MHZ = 1, + REF_CLK_FREQ_38_4_MHZ = 2, + REF_CLK_FREQ_52_MHZ = 3, + REF_CLK_FREQ_INVAL = -1, +}; + +/* Query response result code */ +enum { + QUERY_RESULT_SUCCESS = 0x00, + QUERY_RESULT_NOT_READABLE = 0xF6, + QUERY_RESULT_NOT_WRITEABLE = 0xF7, + QUERY_RESULT_ALREADY_WRITTEN = 0xF8, + QUERY_RESULT_INVALID_LENGTH = 0xF9, + QUERY_RESULT_INVALID_VALUE = 0xFA, + QUERY_RESULT_INVALID_SELECTOR = 0xFB, + QUERY_RESULT_INVALID_INDEX = 0xFC, + QUERY_RESULT_INVALID_IDN = 0xFD, + QUERY_RESULT_INVALID_OPCODE = 0xFE, + QUERY_RESULT_GENERAL_FAILURE = 0xFF, +}; + +/* UTP Transfer Request Command Type (CT) */ +enum { + UPIU_COMMAND_SET_TYPE_SCSI = 0x0, + UPIU_COMMAND_SET_TYPE_UFS = 0x1, + UPIU_COMMAND_SET_TYPE_QUERY = 0x2, +}; + +/* UTP Transfer Request Command Offset */ +#define UPIU_COMMAND_TYPE_OFFSET 28 + +/* Offset of the response code in the UPIU header */ +#define UPIU_RSP_CODE_OFFSET 8 + +enum { + MASK_SCSI_STATUS = 0xFF, + MASK_TASK_RESPONSE = 0xFF00, + MASK_RSP_UPIU_RESULT = 0xFFFF, + MASK_QUERY_DATA_SEG_LEN = 0xFFFF, + MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF, + MASK_RSP_EXCEPTION_EVENT = 0x10000, + MASK_TM_SERVICE_RESP = 0xFF, + MASK_TM_FUNC = 0xFF, +}; + +/* Task management service response */ +enum { + UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00, + UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04, + UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08, + UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05, + UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09, +}; + +/* UFS device power modes */ +enum ufs_dev_pwr_mode { + UFS_ACTIVE_PWR_MODE = 1, + UFS_SLEEP_PWR_MODE = 2, + UFS_POWERDOWN_PWR_MODE = 3, + UFS_DEEPSLEEP_PWR_MODE = 4, +}; + +#define UFS_WB_BUF_REMAIN_PERCENT(val) ((val) / 10) + +/** + * struct utp_cmd_rsp - Response UPIU structure + * @residual_transfer_count: Residual transfer count DW-3 + * @reserved: Reserved double words DW-4 to DW-7 + * @sense_data_len: Sense data length DW-8 U16 + * @sense_data: Sense data field DW-8 to DW-12 + */ +struct utp_cmd_rsp { + __be32 residual_transfer_count; + __be32 reserved[4]; + __be16 sense_data_len; + u8 sense_data[UFS_SENSE_SIZE]; +}; + +struct ufshpb_active_field { + __be16 active_rgn; + __be16 active_srgn; +}; +#define HPB_ACT_FIELD_SIZE 4 + +/** + * struct utp_hpb_rsp - Response UPIU structure + * @residual_transfer_count: Residual transfer count DW-3 + * @reserved1: Reserved double words DW-4 to DW-7 + * @sense_data_len: Sense data length DW-8 U16 + * @desc_type: Descriptor type of sense data + * @additional_len: Additional length of sense data + * @hpb_op: HPB operation type + * @lun: LUN of response UPIU + * @active_rgn_cnt: Active region count + * @inactive_rgn_cnt: Inactive region count + * @hpb_active_field: Recommended to read HPB region and subregion + * @hpb_inactive_field: To be inactivated HPB region and subregion + */ +struct utp_hpb_rsp { + __be32 residual_transfer_count; + __be32 reserved1[4]; + __be16 sense_data_len; + u8 desc_type; + u8 additional_len; + u8 hpb_op; + u8 lun; + u8 active_rgn_cnt; + u8 inactive_rgn_cnt; + struct ufshpb_active_field hpb_active_field[2]; + __be16 hpb_inactive_field[2]; +}; +#define UTP_HPB_RSP_SIZE 40 + +/** + * struct utp_upiu_rsp - general upiu response structure + * @header: UPIU header structure DW-0 to DW-2 + * @sr: fields structure for scsi command DW-3 to DW-12 + * @qr: fields structure for query request DW-3 to DW-7 + */ +struct utp_upiu_rsp { + struct utp_upiu_header header; + union { + struct utp_cmd_rsp sr; + struct utp_hpb_rsp hr; + struct utp_upiu_query qr; + }; +}; + +/** + * struct ufs_query_req - parameters for building a query request + * @query_func: UPIU header query function + * @upiu_req: the query request data + */ +struct ufs_query_req { + u8 query_func; + struct utp_upiu_query upiu_req; +}; + +/** + * struct ufs_query_resp - UPIU QUERY + * @response: device response code + * @upiu_res: query response data + */ +struct ufs_query_res { + u8 response; + struct utp_upiu_query upiu_res; +}; + +/* + * VCCQ & VCCQ2 current requirement when UFS device is in sleep state + * and link is in Hibern8 state. + */ +#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */ + +struct ufs_vreg { + struct regulator *reg; + const char *name; + bool always_on; + bool enabled; + int max_uA; +}; + +struct ufs_vreg_info { + struct ufs_vreg *vcc; + struct ufs_vreg *vccq; + struct ufs_vreg *vccq2; + struct ufs_vreg *vdd_hba; +}; + +struct ufs_dev_info { + bool f_power_on_wp_en; + /* Keeps information if any of the LU is power on write protected */ + bool is_lu_power_on_wp; + /* Maximum number of general LU supported by the UFS device */ + u8 max_lu_supported; + u16 wmanufacturerid; + /*UFS device Product Name */ + u8 *model; + u16 wspecversion; + u32 clk_gating_wait_us; + + /* UFS HPB related flag */ + bool hpb_enabled; + + /* UFS WB related flags */ + bool wb_enabled; + bool wb_buf_flush_enabled; + u8 wb_dedicated_lu; + u8 wb_buffer_type; + + bool b_rpm_dev_flush_capable; + u8 b_presrv_uspc_en; +}; + +/* + * This enum is used in string mapping in include/trace/events/ufs.h. + */ +enum ufs_trace_str_t { + UFS_CMD_SEND, UFS_CMD_COMP, UFS_DEV_COMP, + UFS_QUERY_SEND, UFS_QUERY_COMP, UFS_QUERY_ERR, + UFS_TM_SEND, UFS_TM_COMP, UFS_TM_ERR +}; + +/* + * Transaction Specific Fields (TSF) type in the UPIU package, this enum is + * used in include/trace/events/ufs.h for UFS command trace. + */ +enum ufs_trace_tsf_t { + UFS_TSF_CDB, UFS_TSF_OSF, UFS_TSF_TM_INPUT, UFS_TSF_TM_OUTPUT +}; + +#endif /* End of Header */ diff --git a/include/ufs/ufs_quirks.h b/include/ufs/ufs_quirks.h new file mode 100644 index 000000000000..bcb4f004bed5 --- /dev/null +++ b/include/ufs/ufs_quirks.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + */ + +#ifndef _UFS_QUIRKS_H_ +#define _UFS_QUIRKS_H_ + +/* return true if s1 is a prefix of s2 */ +#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1)) + +#define UFS_ANY_VENDOR 0xFFFF +#define UFS_ANY_MODEL "ANY_MODEL" + +#define UFS_VENDOR_MICRON 0x12C +#define UFS_VENDOR_SAMSUNG 0x1CE +#define UFS_VENDOR_SKHYNIX 0x1AD +#define UFS_VENDOR_TOSHIBA 0x198 +#define UFS_VENDOR_WDC 0x145 + +/** + * ufs_dev_quirk - ufs device quirk info + * @card: ufs card details + * @quirk: device quirk + */ +struct ufs_dev_quirk { + u16 wmanufacturerid; + const u8 *model; + unsigned int quirk; +}; + +/* + * Some vendor's UFS device sends back to back NACs for the DL data frames + * causing the host controller to raise the DFES error status. Sometimes + * such UFS devices send back to back NAC without waiting for new + * retransmitted DL frame from the host and in such cases it might be possible + * the Host UniPro goes into bad state without raising the DFES error + * interrupt. If this happens then all the pending commands would timeout + * only after respective SW command (which is generally too large). + * + * We can workaround such device behaviour like this: + * - As soon as SW sees the DL NAC error, it should schedule the error handler + * - Error handler would sleep for 50ms to see if there are any fatal errors + * raised by UFS controller. + * - If there are fatal errors then SW does normal error recovery. + * - If there are no fatal errors then SW sends the NOP command to device + * to check if link is alive. + * - If NOP command times out, SW does normal error recovery + * - If NOP command succeed, skip the error handling. + * + * If DL NAC error is seen multiple times with some vendor's UFS devices then + * enable this quirk to initiate quick error recovery and also silence related + * error logs to reduce spamming of kernel logs. + */ +#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2) + +/* + * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as + * 600us which may not be enough for reliable hibern8 exit hardware sequence + * from UFS device. + * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even + * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms. + */ +#define UFS_DEVICE_QUIRK_PA_TACTIVATE (1 << 4) + +/* + * It seems some UFS devices may keep drawing more than sleep current + * (atleast for 500us) from UFS rails (especially from VCCQ rail). + * To avoid this situation, add 2ms delay before putting these UFS + * rails in LPM mode. + */ +#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM (1 << 6) + +/* + * Some UFS devices require host PA_TACTIVATE to be lower than device + * PA_TACTIVATE, enabling this quirk ensure this. + */ +#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE (1 << 7) + +/* + * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for + * some vendors. + * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime. + * Gear switch can be issued by host controller as an error recovery and any + * software delay will not help on this case so we need to increase + * PA_SaveConfigTime to >32us as per vendor recommendation. + */ +#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8) + +/* + * Some UFS devices require VS_DebugSaveConfigTime is 0x10, + * enabling this quirk ensure this. + */ +#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME (1 << 9) + +/* + * Some pre-3.1 UFS devices can support extended features by upgrading + * the firmware. Enable this quirk to make UFS core driver probe and enable + * supported features on such devices. + */ +#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10) + +/* + * Some UFS devices require delay after VCC power rail is turned-off. + * Enable this quirk to introduce 5ms delays after VCC power-off during + * suspend flow. + */ +#define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM (1 << 11) + +/* + * Some UFS devices require L2P entry should be swapped before being sent to the + * UFS device for HPB READ command. + */ +#define UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ (1 << 12) + +#endif /* UFS_QUIRKS_H_ */ diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h new file mode 100644 index 000000000000..a92271421718 --- /dev/null +++ b/include/ufs/ufshcd.h @@ -0,0 +1,1230 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Universal Flash Storage Host controller driver + * Copyright (C) 2011-2013 Samsung India Software Operations + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti + */ + +#ifndef _UFSHCD_H +#define _UFSHCD_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define UFSHCD "ufshcd" + +struct ufs_hba; + +enum dev_cmd_type { + DEV_CMD_TYPE_NOP = 0x0, + DEV_CMD_TYPE_QUERY = 0x1, +}; + +enum ufs_event_type { + /* uic specific errors */ + UFS_EVT_PA_ERR = 0, + UFS_EVT_DL_ERR, + UFS_EVT_NL_ERR, + UFS_EVT_TL_ERR, + UFS_EVT_DME_ERR, + + /* fatal errors */ + UFS_EVT_AUTO_HIBERN8_ERR, + UFS_EVT_FATAL_ERR, + UFS_EVT_LINK_STARTUP_FAIL, + UFS_EVT_RESUME_ERR, + UFS_EVT_SUSPEND_ERR, + UFS_EVT_WL_SUSP_ERR, + UFS_EVT_WL_RES_ERR, + + /* abnormal events */ + UFS_EVT_DEV_RESET, + UFS_EVT_HOST_RESET, + UFS_EVT_ABORT, + + UFS_EVT_CNT, +}; + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @done: UIC command completion + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + struct completion done; +}; + +/* Used to differentiate the power management options */ +enum ufs_pm_op { + UFS_RUNTIME_PM, + UFS_SYSTEM_PM, + UFS_SHUTDOWN_PM, +}; + +/* Host <-> Device UniPro Link state */ +enum uic_link_state { + UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ + UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */ + UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */ + UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */ +}; + +#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE) +#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \ + UIC_LINK_ACTIVE_STATE) +#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \ + UIC_LINK_HIBERN8_STATE) +#define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \ + UIC_LINK_BROKEN_STATE) +#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE) +#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \ + UIC_LINK_ACTIVE_STATE) +#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \ + UIC_LINK_HIBERN8_STATE) +#define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \ + UIC_LINK_BROKEN_STATE) + +#define ufshcd_set_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) +#define ufshcd_set_ufs_dev_sleep(h) \ + ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) +#define ufshcd_set_ufs_dev_poweroff(h) \ + ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE) +#define ufshcd_set_ufs_dev_deepsleep(h) \ + ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE) +#define ufshcd_is_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE) +#define ufshcd_is_ufs_dev_sleep(h) \ + ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE) +#define ufshcd_is_ufs_dev_poweroff(h) \ + ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE) +#define ufshcd_is_ufs_dev_deepsleep(h) \ + ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE) + +/* + * UFS Power management levels. + * Each level is in increasing order of power savings, except DeepSleep + * which is lower than PowerDown with power on but not PowerDown with + * power off. + */ +enum ufs_pm_level { + UFS_PM_LVL_0, + UFS_PM_LVL_1, + UFS_PM_LVL_2, + UFS_PM_LVL_3, + UFS_PM_LVL_4, + UFS_PM_LVL_5, + UFS_PM_LVL_6, + UFS_PM_LVL_MAX +}; + +struct ufs_pm_lvl_states { + enum ufs_dev_pwr_mode dev_state; + enum uic_link_state link_state; +}; + +/** + * struct ufshcd_lrb - local reference block + * @utr_descriptor_ptr: UTRD address of the command + * @ucd_req_ptr: UCD address of the command + * @ucd_rsp_ptr: Response UPIU address for this command + * @ucd_prdt_ptr: PRDT address of the command + * @utrd_dma_addr: UTRD dma address for debug + * @ucd_prdt_dma_addr: PRDT dma address for debug + * @ucd_rsp_dma_addr: UPIU response dma address for debug + * @ucd_req_dma_addr: UPIU request dma address for debug + * @cmd: pointer to SCSI command + * @scsi_status: SCSI status of the command + * @command_type: SCSI, UFS, Query. + * @task_tag: Task tag of the command + * @lun: LUN of the command + * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation) + * @issue_time_stamp: time stamp for debug purposes + * @compl_time_stamp: time stamp for statistics + * @crypto_key_slot: the key slot to use for inline crypto (-1 if none) + * @data_unit_num: the data unit number for the first block for inline crypto + * @req_abort_skip: skip request abort task flag + */ +struct ufshcd_lrb { + struct utp_transfer_req_desc *utr_descriptor_ptr; + struct utp_upiu_req *ucd_req_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + dma_addr_t utrd_dma_addr; + dma_addr_t ucd_req_dma_addr; + dma_addr_t ucd_rsp_dma_addr; + dma_addr_t ucd_prdt_dma_addr; + + struct scsi_cmnd *cmd; + int scsi_status; + + int command_type; + int task_tag; + u8 lun; /* UPIU LUN id field is only 8-bit wide */ + bool intr_cmd; + ktime_t issue_time_stamp; + ktime_t compl_time_stamp; +#ifdef CONFIG_SCSI_UFS_CRYPTO + int crypto_key_slot; + u64 data_unit_num; +#endif + + bool req_abort_skip; +}; + +/** + * struct ufs_query - holds relevant data structures for query request + * @request: request upiu and function + * @descriptor: buffer for sending/receiving descriptor + * @response: response upiu and response + */ +struct ufs_query { + struct ufs_query_req request; + u8 *descriptor; + struct ufs_query_res response; +}; + +/** + * struct ufs_dev_cmd - all assosiated fields with device management commands + * @type: device management command type - Query, NOP OUT + * @lock: lock to allow one command at a time + * @complete: internal commands completion + * @query: Device management query information + */ +struct ufs_dev_cmd { + enum dev_cmd_type type; + struct mutex lock; + struct completion *complete; + struct ufs_query query; +}; + +/** + * struct ufs_clk_info - UFS clock related info + * @list: list headed by hba->clk_list_head + * @clk: clock node + * @name: clock name + * @max_freq: maximum frequency supported by the clock + * @min_freq: min frequency that can be used for clock scaling + * @curr_freq: indicates the current frequency that it is set to + * @keep_link_active: indicates that the clk should not be disabled if + * link is active + * @enabled: variable to check against multiple enable/disable + */ +struct ufs_clk_info { + struct list_head list; + struct clk *clk; + const char *name; + u32 max_freq; + u32 min_freq; + u32 curr_freq; + bool keep_link_active; + bool enabled; +}; + +enum ufs_notify_change_status { + PRE_CHANGE, + POST_CHANGE, +}; + +struct ufs_pa_layer_attr { + u32 gear_rx; + u32 gear_tx; + u32 lane_rx; + u32 lane_tx; + u32 pwr_rx; + u32 pwr_tx; + u32 hs_rate; +}; + +struct ufs_pwr_mode_info { + bool is_valid; + struct ufs_pa_layer_attr info; +}; + +/** + * struct ufs_hba_variant_ops - variant specific callbacks + * @name: variant name + * @init: called when the driver is initialized + * @exit: called to cleanup everything done in init + * @get_ufs_hci_version: called to get UFS HCI version + * @clk_scale_notify: notifies that clks are scaled up/down + * @setup_clocks: called before touching any of the controller registers + * @hce_enable_notify: called before and after HCE enable bit is set to allow + * variant specific Uni-Pro initialization. + * @link_startup_notify: called before and after Link startup is carried out + * to allow variant specific Uni-Pro initialization. + * @pwr_change_notify: called before and after a power mode change + * is carried out to allow vendor spesific capabilities + * to be set. + * @setup_xfer_req: called before any transfer request is issued + * to set some things + * @setup_task_mgmt: called before any task management request is issued + * to set some things + * @hibern8_notify: called around hibern8 enter/exit + * @apply_dev_quirks: called to apply device specific quirks + * @fixup_dev_quirks: called to modify device specific quirks + * @suspend: called during host controller PM callback + * @resume: called during host controller PM callback + * @dbg_register_dump: used to dump controller debug information + * @phy_initialization: used to initialize phys + * @device_reset: called to issue a reset pulse on the UFS device + * @config_scaling_param: called to configure clock scaling parameters + * @program_key: program or evict an inline encryption key + * @event_notify: called to notify important events + */ +struct ufs_hba_variant_ops { + const char *name; + int (*init)(struct ufs_hba *); + void (*exit)(struct ufs_hba *); + u32 (*get_ufs_hci_version)(struct ufs_hba *); + int (*clk_scale_notify)(struct ufs_hba *, bool, + enum ufs_notify_change_status); + int (*setup_clocks)(struct ufs_hba *, bool, + enum ufs_notify_change_status); + int (*hce_enable_notify)(struct ufs_hba *, + enum ufs_notify_change_status); + int (*link_startup_notify)(struct ufs_hba *, + enum ufs_notify_change_status); + int (*pwr_change_notify)(struct ufs_hba *, + enum ufs_notify_change_status status, + struct ufs_pa_layer_attr *, + struct ufs_pa_layer_attr *); + void (*setup_xfer_req)(struct ufs_hba *hba, int tag, + bool is_scsi_cmd); + void (*setup_task_mgmt)(struct ufs_hba *, int, u8); + void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme, + enum ufs_notify_change_status); + int (*apply_dev_quirks)(struct ufs_hba *hba); + void (*fixup_dev_quirks)(struct ufs_hba *hba); + int (*suspend)(struct ufs_hba *, enum ufs_pm_op, + enum ufs_notify_change_status); + int (*resume)(struct ufs_hba *, enum ufs_pm_op); + void (*dbg_register_dump)(struct ufs_hba *hba); + int (*phy_initialization)(struct ufs_hba *); + int (*device_reset)(struct ufs_hba *hba); + void (*config_scaling_param)(struct ufs_hba *hba, + struct devfreq_dev_profile *profile, + struct devfreq_simple_ondemand_data *data); + int (*program_key)(struct ufs_hba *hba, + const union ufs_crypto_cfg_entry *cfg, int slot); + void (*event_notify)(struct ufs_hba *hba, + enum ufs_event_type evt, void *data); +}; + +/* clock gating state */ +enum clk_gating_state { + CLKS_OFF, + CLKS_ON, + REQ_CLKS_OFF, + REQ_CLKS_ON, +}; + +/** + * struct ufs_clk_gating - UFS clock gating related info + * @gate_work: worker to turn off clocks after some delay as specified in + * delay_ms + * @ungate_work: worker to turn on clocks that will be used in case of + * interrupt context + * @state: the current clocks state + * @delay_ms: gating delay in ms + * @is_suspended: clk gating is suspended when set to 1 which can be used + * during suspend/resume + * @delay_attr: sysfs attribute to control delay_attr + * @enable_attr: sysfs attribute to enable/disable clock gating + * @is_enabled: Indicates the current status of clock gating + * @is_initialized: Indicates whether clock gating is initialized or not + * @active_reqs: number of requests that are pending and should be waited for + * completion before gating clocks. + * @clk_gating_workq: workqueue for clock gating work. + */ +struct ufs_clk_gating { + struct delayed_work gate_work; + struct work_struct ungate_work; + enum clk_gating_state state; + unsigned long delay_ms; + bool is_suspended; + struct device_attribute delay_attr; + struct device_attribute enable_attr; + bool is_enabled; + bool is_initialized; + int active_reqs; + struct workqueue_struct *clk_gating_workq; +}; + +struct ufs_saved_pwr_info { + struct ufs_pa_layer_attr info; + bool is_valid; +}; + +/** + * struct ufs_clk_scaling - UFS clock scaling related data + * @active_reqs: number of requests that are pending. If this is zero when + * devfreq ->target() function is called then schedule "suspend_work" to + * suspend devfreq. + * @tot_busy_t: Total busy time in current polling window + * @window_start_t: Start time (in jiffies) of the current polling window + * @busy_start_t: Start time of current busy period + * @enable_attr: sysfs attribute to enable/disable clock scaling + * @saved_pwr_info: UFS power mode may also be changed during scaling and this + * one keeps track of previous power mode. + * @workq: workqueue to schedule devfreq suspend/resume work + * @suspend_work: worker to suspend devfreq + * @resume_work: worker to resume devfreq + * @min_gear: lowest HS gear to scale down to + * @is_enabled: tracks if scaling is currently enabled or not, controlled by + * clkscale_enable sysfs node + * @is_allowed: tracks if scaling is currently allowed or not, used to block + * clock scaling which is not invoked from devfreq governor + * @is_initialized: Indicates whether clock scaling is initialized or not + * @is_busy_started: tracks if busy period has started or not + * @is_suspended: tracks if devfreq is suspended or not + */ +struct ufs_clk_scaling { + int active_reqs; + unsigned long tot_busy_t; + ktime_t window_start_t; + ktime_t busy_start_t; + struct device_attribute enable_attr; + struct ufs_saved_pwr_info saved_pwr_info; + struct workqueue_struct *workq; + struct work_struct suspend_work; + struct work_struct resume_work; + u32 min_gear; + bool is_enabled; + bool is_allowed; + bool is_initialized; + bool is_busy_started; + bool is_suspended; +}; + +#define UFS_EVENT_HIST_LENGTH 8 +/** + * struct ufs_event_hist - keeps history of errors + * @pos: index to indicate cyclic buffer position + * @val: cyclic buffer for registers value + * @tstamp: cyclic buffer for time stamp + * @cnt: error counter + */ +struct ufs_event_hist { + int pos; + u32 val[UFS_EVENT_HIST_LENGTH]; + ktime_t tstamp[UFS_EVENT_HIST_LENGTH]; + unsigned long long cnt; +}; + +/** + * struct ufs_stats - keeps usage/err statistics + * @last_intr_status: record the last interrupt status. + * @last_intr_ts: record the last interrupt timestamp. + * @hibern8_exit_cnt: Counter to keep track of number of exits, + * reset this after link-startup. + * @last_hibern8_exit_tstamp: Set time after the hibern8 exit. + * Clear after the first successful command completion. + * @event: array with event history. + */ +struct ufs_stats { + u32 last_intr_status; + ktime_t last_intr_ts; + + u32 hibern8_exit_cnt; + ktime_t last_hibern8_exit_tstamp; + struct ufs_event_hist event[UFS_EVT_CNT]; +}; + +/** + * enum ufshcd_state - UFS host controller state + * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command + * processing. + * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process + * SCSI commands. + * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled. + * SCSI commands may be submitted to the controller. + * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail + * newly submitted SCSI commands with error code DID_BAD_TARGET. + * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery + * failed. Fail all SCSI commands with error code DID_ERROR. + */ +enum ufshcd_state { + UFSHCD_STATE_RESET, + UFSHCD_STATE_OPERATIONAL, + UFSHCD_STATE_EH_SCHEDULED_NON_FATAL, + UFSHCD_STATE_EH_SCHEDULED_FATAL, + UFSHCD_STATE_ERROR, +}; + +enum ufshcd_quirks { + /* Interrupt aggregation support is broken */ + UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, + + /* + * delay before each dme command is required as the unipro + * layer has shown instabilities + */ + UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1, + + /* + * If UFS host controller is having issue in processing LCC (Line + * Control Command) coming from device then enable this quirk. + * When this quirk is enabled, host controller driver should disable + * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE + * attribute of device to 0). + */ + UFSHCD_QUIRK_BROKEN_LCC = 1 << 2, + + /* + * The attribute PA_RXHSUNTERMCAP specifies whether or not the + * inbound Link supports unterminated line in HS mode. Setting this + * attribute to 1 fixes moving to HS gear. + */ + UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3, + + /* + * This quirk needs to be enabled if the host controller only allows + * accessing the peer dme attributes in AUTO mode (FAST AUTO or + * SLOW AUTO). + */ + UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4, + + /* + * This quirk needs to be enabled if the host controller doesn't + * advertise the correct version in UFS_VER register. If this quirk + * is enabled, standard UFS host driver will call the vendor specific + * ops (get_ufs_hci_version) to get the correct version. + */ + UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5, + + /* + * Clear handling for transfer/task request list is just opposite. + */ + UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6, + + /* + * This quirk needs to be enabled if host controller doesn't allow + * that the interrupt aggregation timer and counter are reset by s/w. + */ + UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7, + + /* + * This quirks needs to be enabled if host controller cannot be + * enabled via HCE register. + */ + UFSHCI_QUIRK_BROKEN_HCE = 1 << 8, + + /* + * This quirk needs to be enabled if the host controller regards + * resolution of the values of PRDTO and PRDTL in UTRD as byte. + */ + UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9, + + /* + * This quirk needs to be enabled if the host controller reports + * OCS FATAL ERROR with device error through sense data + */ + UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10, + + /* + * This quirk needs to be enabled if the host controller has + * auto-hibernate capability but it doesn't work. + */ + UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11, + + /* + * This quirk needs to disable manual flush for write booster + */ + UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12, + + /* + * This quirk needs to disable unipro timeout values + * before power mode change + */ + UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13, + + /* + * This quirk allows only sg entries aligned with page size. + */ + UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE = 1 << 14, + + /* + * This quirk needs to be enabled if the host controller does not + * support UIC command + */ + UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15, + + /* + * This quirk needs to be enabled if the host controller cannot + * support physical host configuration. + */ + UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16, +}; + +enum ufshcd_caps { + /* Allow dynamic clk gating */ + UFSHCD_CAP_CLK_GATING = 1 << 0, + + /* Allow hiberb8 with clk gating */ + UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1, + + /* Allow dynamic clk scaling */ + UFSHCD_CAP_CLK_SCALING = 1 << 2, + + /* Allow auto bkops to enabled during runtime suspend */ + UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3, + + /* + * This capability allows host controller driver to use the UFS HCI's + * interrupt aggregation capability. + * CAUTION: Enabling this might reduce overall UFS throughput. + */ + UFSHCD_CAP_INTR_AGGR = 1 << 4, + + /* + * This capability allows the device auto-bkops to be always enabled + * except during suspend (both runtime and suspend). + * Enabling this capability means that device will always be allowed + * to do background operation when it's active but it might degrade + * the performance of ongoing read/write operations. + */ + UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5, + + /* + * This capability allows host controller driver to automatically + * enable runtime power management by itself instead of waiting + * for userspace to control the power management. + */ + UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6, + + /* + * This capability allows the host controller driver to turn-on + * WriteBooster, if the underlying device supports it and is + * provisioned to be used. This would increase the write performance. + */ + UFSHCD_CAP_WB_EN = 1 << 7, + + /* + * This capability allows the host controller driver to use the + * inline crypto engine, if it is present + */ + UFSHCD_CAP_CRYPTO = 1 << 8, + + /* + * This capability allows the controller regulators to be put into + * lpm mode aggressively during clock gating. + * This would increase power savings. + */ + UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9, + + /* + * This capability allows the host controller driver to use DeepSleep, + * if it is supported by the UFS device. The host controller driver must + * support device hardware reset via the hba->device_reset() callback, + * in order to exit DeepSleep state. + */ + UFSHCD_CAP_DEEPSLEEP = 1 << 10, + + /* + * This capability allows the host controller driver to use temperature + * notification if it is supported by the UFS device. + */ + UFSHCD_CAP_TEMP_NOTIF = 1 << 11, +}; + +struct ufs_hba_variant_params { + struct devfreq_dev_profile devfreq_profile; + struct devfreq_simple_ondemand_data ondemand_data; + u16 hba_enable_delay_us; + u32 wb_flush_threshold; +}; + +#ifdef CONFIG_SCSI_UFS_HPB +/** + * struct ufshpb_dev_info - UFSHPB device related info + * @num_lu: the number of user logical unit to check whether all lu finished + * initialization + * @rgn_size: device reported HPB region size + * @srgn_size: device reported HPB sub-region size + * @slave_conf_cnt: counter to check all lu finished initialization + * @hpb_disabled: flag to check if HPB is disabled + * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value + * @is_legacy: flag to check HPB 1.0 + * @control_mode: either host or device + */ +struct ufshpb_dev_info { + int num_lu; + int rgn_size; + int srgn_size; + atomic_t slave_conf_cnt; + bool hpb_disabled; + u8 max_hpb_single_cmd; + bool is_legacy; + u8 control_mode; +}; +#endif + +struct ufs_hba_monitor { + unsigned long chunk_size; + + unsigned long nr_sec_rw[2]; + ktime_t total_busy[2]; + + unsigned long nr_req[2]; + /* latencies*/ + ktime_t lat_sum[2]; + ktime_t lat_max[2]; + ktime_t lat_min[2]; + + u32 nr_queued[2]; + ktime_t busy_start_ts[2]; + + ktime_t enabled_ts; + bool enabled; +}; + +/** + * struct ufs_hba - per adapter private structure + * @mmio_base: UFSHCI base register address + * @ucdl_base_addr: UFS Command Descriptor base address + * @utrdl_base_addr: UTP Transfer Request Descriptor base address + * @utmrdl_base_addr: UTP Task Management Descriptor base address + * @ucdl_dma_addr: UFS Command Descriptor DMA address + * @utrdl_dma_addr: UTRDL DMA address + * @utmrdl_dma_addr: UTMRDL DMA address + * @host: Scsi_Host instance of the driver + * @dev: device handle + * @ufs_device_wlun: WLUN that controls the entire UFS device. + * @hwmon_device: device instance registered with the hwmon core. + * @curr_dev_pwr_mode: active UFS device power mode. + * @uic_link_state: active state of the link to the UFS device. + * @rpm_lvl: desired UFS power management level during runtime PM. + * @spm_lvl: desired UFS power management level during system PM. + * @pm_op_in_progress: whether or not a PM operation is in progress. + * @ahit: value of Auto-Hibernate Idle Timer register. + * @lrb: local reference block + * @outstanding_tasks: Bits representing outstanding task requests + * @outstanding_lock: Protects @outstanding_reqs. + * @outstanding_reqs: Bits representing outstanding transfer requests + * @capabilities: UFS Controller Capabilities + * @nutrs: Transfer Request Queue depth supported by controller + * @nutmrs: Task Management Queue depth supported by controller + * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock. + * @ufs_version: UFS Version to which controller complies + * @vops: pointer to variant specific operations + * @vps: pointer to variant specific parameters + * @priv: pointer to variant specific private data + * @irq: Irq number of the controller + * @is_irq_enabled: whether or not the UFS controller interrupt is enabled. + * @dev_ref_clk_freq: reference clock frequency + * @quirks: bitmask with information about deviations from the UFSHCI standard. + * @dev_quirks: bitmask with information about deviations from the UFS standard. + * @tmf_tag_set: TMF tag set. + * @tmf_queue: Used to allocate TMF tags. + * @tmf_rqs: array with pointers to TMF requests while these are in progress. + * @active_uic_cmd: handle of active UIC command + * @uic_cmd_mutex: mutex for UIC command + * @uic_async_done: completion used during UIC processing + * @ufshcd_state: UFSHCD state + * @eh_flags: Error handling flags + * @intr_mask: Interrupt Mask Bits + * @ee_ctrl_mask: Exception event control mask + * @ee_drv_mask: Exception event mask for driver + * @ee_usr_mask: Exception event mask for user (set via debugfs) + * @ee_ctrl_mutex: Used to serialize exception event information. + * @is_powered: flag to check if HBA is powered + * @shutting_down: flag to check if shutdown has been invoked + * @host_sem: semaphore used to serialize concurrent contexts + * @eh_wq: Workqueue that eh_work works on + * @eh_work: Worker to handle UFS errors that require s/w attention + * @eeh_work: Worker to handle exception events + * @errors: HBA errors + * @uic_error: UFS interconnect layer error status + * @saved_err: sticky error mask + * @saved_uic_err: sticky UIC error mask + * @ufs_stats: various error counters + * @force_reset: flag to force eh_work perform a full reset + * @force_pmc: flag to force a power mode change + * @silence_err_logs: flag to silence error logs + * @dev_cmd: ufs device management command information + * @last_dme_cmd_tstamp: time stamp of the last completed DME command + * @nop_out_timeout: NOP OUT timeout value + * @dev_info: information about the UFS device + * @auto_bkops_enabled: to track whether bkops is enabled in device + * @vreg_info: UFS device voltage regulator information + * @clk_list_head: UFS host controller clocks list node head + * @req_abort_count: number of times ufshcd_abort() has been called + * @lanes_per_direction: number of lanes per data direction between the UFS + * controller and the UFS device. + * @pwr_info: holds current power mode + * @max_pwr_info: keeps the device max valid pwm + * @clk_gating: information related to clock gating + * @caps: bitmask with information about UFS controller capabilities + * @devfreq: frequency scaling information owned by the devfreq core + * @clk_scaling: frequency scaling information owned by the UFS driver + * @is_sys_suspended: whether or not the entire system has been suspended + * @urgent_bkops_lvl: keeps track of urgent bkops level for device + * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for + * device is known or not. + * @clk_scaling_lock: used to serialize device commands and clock scaling + * @desc_size: descriptor sizes reported by device + * @scsi_block_reqs_cnt: reference counting for scsi block requests + * @bsg_dev: struct device associated with the BSG queue + * @bsg_queue: BSG queue associated with the UFS controller + * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power + * management) after the UFS device has finished a WriteBooster buffer + * flush or auto BKOP. + * @ufshpb_dev: information related to HPB (Host Performance Booster). + * @monitor: statistics about UFS commands + * @crypto_capabilities: Content of crypto capabilities register (0x100) + * @crypto_cap_array: Array of crypto capabilities + * @crypto_cfg_register: Start of the crypto cfg array + * @crypto_profile: the crypto profile of this hba (if applicable) + * @debugfs_root: UFS controller debugfs root directory + * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay + * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore + * ee_ctrl_mask + * @luns_avail: number of regular and well known LUNs supported by the UFS + * device + * @complete_put: whether or not to call ufshcd_rpm_put() from inside + * ufshcd_resume_complete() + */ +struct ufs_hba { + void __iomem *mmio_base; + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl_base_addr; + struct utp_transfer_req_desc *utrdl_base_addr; + struct utp_task_req_desc *utmrdl_base_addr; + + /* DMA memory reference */ + dma_addr_t ucdl_dma_addr; + dma_addr_t utrdl_dma_addr; + dma_addr_t utmrdl_dma_addr; + + struct Scsi_Host *host; + struct device *dev; + struct scsi_device *ufs_device_wlun; + +#ifdef CONFIG_SCSI_UFS_HWMON + struct device *hwmon_device; +#endif + + enum ufs_dev_pwr_mode curr_dev_pwr_mode; + enum uic_link_state uic_link_state; + /* Desired UFS power management level during runtime PM */ + enum ufs_pm_level rpm_lvl; + /* Desired UFS power management level during system PM */ + enum ufs_pm_level spm_lvl; + int pm_op_in_progress; + + /* Auto-Hibernate Idle Timer register value */ + u32 ahit; + + struct ufshcd_lrb *lrb; + + unsigned long outstanding_tasks; + spinlock_t outstanding_lock; + unsigned long outstanding_reqs; + + u32 capabilities; + int nutrs; + int nutmrs; + u32 reserved_slot; + u32 ufs_version; + const struct ufs_hba_variant_ops *vops; + struct ufs_hba_variant_params *vps; + void *priv; + unsigned int irq; + bool is_irq_enabled; + enum ufs_ref_clk_freq dev_ref_clk_freq; + + unsigned int quirks; /* Deviations from standard UFSHCI spec. */ + + /* Device deviations from standard UFS device spec. */ + unsigned int dev_quirks; + + struct blk_mq_tag_set tmf_tag_set; + struct request_queue *tmf_queue; + struct request **tmf_rqs; + + struct uic_command *active_uic_cmd; + struct mutex uic_cmd_mutex; + struct completion *uic_async_done; + + enum ufshcd_state ufshcd_state; + u32 eh_flags; + u32 intr_mask; + u16 ee_ctrl_mask; + u16 ee_drv_mask; + u16 ee_usr_mask; + struct mutex ee_ctrl_mutex; + bool is_powered; + bool shutting_down; + struct semaphore host_sem; + + /* Work Queues */ + struct workqueue_struct *eh_wq; + struct work_struct eh_work; + struct work_struct eeh_work; + + /* HBA Errors */ + u32 errors; + u32 uic_error; + u32 saved_err; + u32 saved_uic_err; + struct ufs_stats ufs_stats; + bool force_reset; + bool force_pmc; + bool silence_err_logs; + + /* Device management request data */ + struct ufs_dev_cmd dev_cmd; + ktime_t last_dme_cmd_tstamp; + int nop_out_timeout; + + /* Keeps information of the UFS device connected to this host */ + struct ufs_dev_info dev_info; + bool auto_bkops_enabled; + struct ufs_vreg_info vreg_info; + struct list_head clk_list_head; + + /* Number of requests aborts */ + int req_abort_count; + + /* Number of lanes available (1 or 2) for Rx/Tx */ + u32 lanes_per_direction; + struct ufs_pa_layer_attr pwr_info; + struct ufs_pwr_mode_info max_pwr_info; + + struct ufs_clk_gating clk_gating; + /* Control to enable/disable host capabilities */ + u32 caps; + + struct devfreq *devfreq; + struct ufs_clk_scaling clk_scaling; + bool is_sys_suspended; + + enum bkops_status urgent_bkops_lvl; + bool is_urgent_bkops_lvl_checked; + + struct rw_semaphore clk_scaling_lock; + unsigned char desc_size[QUERY_DESC_IDN_MAX]; + atomic_t scsi_block_reqs_cnt; + + struct device bsg_dev; + struct request_queue *bsg_queue; + struct delayed_work rpm_dev_flush_recheck_work; + +#ifdef CONFIG_SCSI_UFS_HPB + struct ufshpb_dev_info ufshpb_dev; +#endif + + struct ufs_hba_monitor monitor; + +#ifdef CONFIG_SCSI_UFS_CRYPTO + union ufs_crypto_capabilities crypto_capabilities; + union ufs_crypto_cap_entry *crypto_cap_array; + u32 crypto_cfg_register; + struct blk_crypto_profile crypto_profile; +#endif +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; + struct delayed_work debugfs_ee_work; + u32 debugfs_ee_rate_limit_ms; +#endif + u32 luns_avail; + bool complete_put; +}; + +/* Returns true if clocks can be gated. Otherwise false */ +static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba) +{ + return hba->caps & UFSHCD_CAP_CLK_GATING; +} +static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba) +{ + return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; +} +static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba) +{ + return hba->caps & UFSHCD_CAP_CLK_SCALING; +} +static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) +{ + return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND; +} +static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba) +{ + return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND; +} + +static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba) +{ + return (hba->caps & UFSHCD_CAP_INTR_AGGR) && + !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR); +} + +static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba) +{ + return !!(ufshcd_is_link_hibern8(hba) && + (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE)); +} + +static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) +{ + return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) && + !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8); +} + +static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba) +{ + return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit); +} + +static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba) +{ + return hba->caps & UFSHCD_CAP_WB_EN; +} + +#define ufshcd_writel(hba, val, reg) \ + writel((val), (hba)->mmio_base + (reg)) +#define ufshcd_readl(hba, reg) \ + readl((hba)->mmio_base + (reg)) + +/** + * ufshcd_rmwl - perform read/modify/write for a controller register + * @hba: per adapter instance + * @mask: mask to apply on read value + * @val: actual value to write + * @reg: register address + */ +static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) +{ + u32 tmp; + + tmp = ufshcd_readl(hba, reg); + tmp &= ~mask; + tmp |= (val & mask); + ufshcd_writel(hba, tmp, reg); +} + +int ufshcd_alloc_host(struct device *, struct ufs_hba **); +void ufshcd_dealloc_host(struct ufs_hba *); +int ufshcd_hba_enable(struct ufs_hba *hba); +int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int); +int ufshcd_link_recovery(struct ufs_hba *hba); +int ufshcd_make_hba_operational(struct ufs_hba *hba); +void ufshcd_remove(struct ufs_hba *); +int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); +int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); +void ufshcd_delay_us(unsigned long us, unsigned long tolerance); +void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk); +void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val); +void ufshcd_hba_stop(struct ufs_hba *hba); +void ufshcd_schedule_eh_work(struct ufs_hba *hba); + +static inline void check_upiu_size(void) +{ + BUILD_BUG_ON(ALIGNED_UPIU_SIZE < + GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE); +} + +/** + * ufshcd_set_variant - set variant specific data to the hba + * @hba: per adapter instance + * @variant: pointer to variant specific data + */ +static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant) +{ + BUG_ON(!hba); + hba->priv = variant; +} + +/** + * ufshcd_get_variant - get variant specific data from the hba + * @hba: per adapter instance + */ +static inline void *ufshcd_get_variant(struct ufs_hba *hba) +{ + BUG_ON(!hba); + return hba->priv; +} + +#ifdef CONFIG_PM +extern int ufshcd_runtime_suspend(struct device *dev); +extern int ufshcd_runtime_resume(struct device *dev); +#endif +#ifdef CONFIG_PM_SLEEP +extern int ufshcd_system_suspend(struct device *dev); +extern int ufshcd_system_resume(struct device *dev); +#endif +extern int ufshcd_shutdown(struct ufs_hba *hba); +extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, + int agreed_gear, + int adapt_val); +extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, + u8 attr_set, u32 mib_val, u8 peer); +extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer); +extern int ufshcd_config_pwr_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *desired_pwr_mode); + +/* UIC command interfaces for DME primitives */ +#define DME_LOCAL 0 +#define DME_PEER 1 +#define ATTR_SET_NOR 0 /* NORMAL */ +#define ATTR_SET_ST 1 /* STATIC */ + +static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, + mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, + mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, + mib_val, DME_PEER); +} + +static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, + mib_val, DME_PEER); +} + +static inline int ufshcd_dme_get(struct ufs_hba *hba, + u32 attr_sel, u32 *mib_val) +{ + return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, + u32 attr_sel, u32 *mib_val) +{ + return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER); +} + +static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info) +{ + return (pwr_info->pwr_rx == FAST_MODE || + pwr_info->pwr_rx == FASTAUTO_MODE) && + (pwr_info->pwr_tx == FAST_MODE || + pwr_info->pwr_tx == FASTAUTO_MODE); +} + +static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba) +{ + return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0); +} + +/* Expose Query-Request API */ +int ufshcd_query_descriptor_retry(struct ufs_hba *hba, + enum query_opcode opcode, + enum desc_idn idn, u8 index, + u8 selector, + u8 *desc_buf, int *buf_len); +int ufshcd_read_desc_param(struct ufs_hba *hba, + enum desc_idn desc_id, + int desc_index, + u8 param_offset, + u8 *param_read_buf, + u8 param_size); +int ufshcd_query_attr_retry(struct ufs_hba *hba, enum query_opcode opcode, + enum attr_idn idn, u8 index, u8 selector, + u32 *attr_val); +int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode, + enum attr_idn idn, u8 index, u8 selector, u32 *attr_val); +int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, + enum flag_idn idn, u8 index, bool *flag_res); + +void ufshcd_auto_hibern8_enable(struct ufs_hba *hba); +void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit); +void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, + const struct ufs_dev_quirk *fixups); +#define SD_ASCII_STD true +#define SD_RAW false +int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, + u8 **buf, bool ascii); + +int ufshcd_hold(struct ufs_hba *hba, bool async); +void ufshcd_release(struct ufs_hba *hba); + +void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value); + +void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id, + int *desc_length); + +u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba); + +int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd); + +int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba, + struct utp_upiu_req *req_upiu, + struct utp_upiu_req *rsp_upiu, + int msgcode, + u8 *desc_buff, int *buff_len, + enum query_opcode desc_op); + +int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable); +int ufshcd_suspend_prepare(struct device *dev); +int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm); +void ufshcd_resume_complete(struct device *dev); + +/* Wrapper functions for safely calling variant operations */ +static inline int ufshcd_vops_init(struct ufs_hba *hba) +{ + if (hba->vops && hba->vops->init) + return hba->vops->init(hba); + + return 0; +} + +static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba) +{ + if (hba->vops && hba->vops->phy_initialization) + return hba->vops->phy_initialization(hba); + + return 0; +} + +extern struct ufs_pm_lvl_states ufs_pm_lvl_states[]; + +int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, + const char *prefix); + +int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask); +int ufshcd_write_ee_control(struct ufs_hba *hba); +int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, u16 *other_mask, + u16 set, u16 clr); + +#endif /* End of Header */ diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h new file mode 100644 index 000000000000..f81aa95ffbc4 --- /dev/null +++ b/include/ufs/ufshci.h @@ -0,0 +1,510 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Universal Flash Storage Host controller driver + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti + */ + +#ifndef _UFSHCI_H +#define _UFSHCI_H + +#include + +enum { + TASK_REQ_UPIU_SIZE_DWORDS = 8, + TASK_RSP_UPIU_SIZE_DWORDS = 8, + ALIGNED_UPIU_SIZE = 512, +}; + +/* UFSHCI Registers */ +enum { + REG_CONTROLLER_CAPABILITIES = 0x00, + REG_UFS_VERSION = 0x08, + REG_CONTROLLER_DEV_ID = 0x10, + REG_CONTROLLER_PROD_ID = 0x14, + REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18, + REG_INTERRUPT_STATUS = 0x20, + REG_INTERRUPT_ENABLE = 0x24, + REG_CONTROLLER_STATUS = 0x30, + REG_CONTROLLER_ENABLE = 0x34, + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, + REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, + REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, + REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, + REG_UIC_ERROR_CODE_DME = 0x48, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, + REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, + REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, + REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, + REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, + REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, + REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, + REG_UTP_TASK_REQ_DOOR_BELL = 0x78, + REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, + REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, + REG_UIC_COMMAND = 0x90, + REG_UIC_COMMAND_ARG_1 = 0x94, + REG_UIC_COMMAND_ARG_2 = 0x98, + REG_UIC_COMMAND_ARG_3 = 0x9C, + + UFSHCI_REG_SPACE_SIZE = 0xA0, + + REG_UFS_CCAP = 0x100, + REG_UFS_CRYPTOCAP = 0x104, + + UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400, +}; + +/* Controller capability masks */ +enum { + MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, + MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, + MASK_AUTO_HIBERN8_SUPPORT = 0x00800000, + MASK_64_ADDRESSING_SUPPORT = 0x01000000, + MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, + MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, + MASK_CRYPTO_SUPPORT = 0x10000000, +}; + +#define UFS_MASK(mask, offset) ((mask) << (offset)) + +/* UFS Version 08h */ +#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0) +#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16) + +/* + * Controller UFSHCI version + * - 2.x and newer use the following scheme: + * major << 8 + minor << 4 + * - 1.x has been converted to match this in + * ufshcd_get_ufs_version() + */ +static inline u32 ufshci_version(u32 major, u32 minor) +{ + return (major << 8) + (minor << 4); +} + +/* + * HCDDID - Host Controller Identification Descriptor + * - Device ID and Device Class 10h + */ +#define DEVICE_CLASS UFS_MASK(0xFFFF, 0) +#define DEVICE_ID UFS_MASK(0xFF, 24) + +/* + * HCPMID - Host Controller Identification Descriptor + * - Product/Manufacturer ID 14h + */ +#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0) +#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16) + +/* AHIT - Auto-Hibernate Idle Timer */ +#define UFSHCI_AHIBERN8_TIMER_MASK GENMASK(9, 0) +#define UFSHCI_AHIBERN8_SCALE_MASK GENMASK(12, 10) +#define UFSHCI_AHIBERN8_SCALE_FACTOR 10 +#define UFSHCI_AHIBERN8_MAX (1023 * 100000) + +/* + * IS - Interrupt Status - 20h + */ +#define UTP_TRANSFER_REQ_COMPL 0x1 +#define UIC_DME_END_PT_RESET 0x2 +#define UIC_ERROR 0x4 +#define UIC_TEST_MODE 0x8 +#define UIC_POWER_MODE 0x10 +#define UIC_HIBERNATE_EXIT 0x20 +#define UIC_HIBERNATE_ENTER 0x40 +#define UIC_LINK_LOST 0x80 +#define UIC_LINK_STARTUP 0x100 +#define UTP_TASK_REQ_COMPL 0x200 +#define UIC_COMMAND_COMPL 0x400 +#define DEVICE_FATAL_ERROR 0x800 +#define CONTROLLER_FATAL_ERROR 0x10000 +#define SYSTEM_BUS_FATAL_ERROR 0x20000 +#define CRYPTO_ENGINE_FATAL_ERROR 0x40000 + +#define UFSHCD_UIC_HIBERN8_MASK (UIC_HIBERNATE_ENTER |\ + UIC_HIBERNATE_EXIT) + +#define UFSHCD_UIC_PWR_MASK (UFSHCD_UIC_HIBERN8_MASK |\ + UIC_POWER_MODE) + +#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK) + +#define UFSHCD_ERROR_MASK (UIC_ERROR |\ + DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR |\ + CRYPTO_ENGINE_FATAL_ERROR) + +#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR |\ + CRYPTO_ENGINE_FATAL_ERROR |\ + UIC_LINK_LOST) + +/* HCS - Host Controller Status 30h */ +#define DEVICE_PRESENT 0x1 +#define UTP_TRANSFER_REQ_LIST_READY 0x2 +#define UTP_TASK_REQ_LIST_READY 0x4 +#define UIC_COMMAND_READY 0x8 +#define HOST_ERROR_INDICATOR 0x10 +#define DEVICE_ERROR_INDICATOR 0x20 +#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) + +#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\ + UTP_TASK_REQ_LIST_READY |\ + UIC_COMMAND_READY) + +enum { + PWR_OK = 0x0, + PWR_LOCAL = 0x01, + PWR_REMOTE = 0x02, + PWR_BUSY = 0x03, + PWR_ERROR_CAP = 0x04, + PWR_FATAL_ERROR = 0x05, +}; + +/* HCE - Host Controller Enable 34h */ +#define CONTROLLER_ENABLE 0x1 +#define CONTROLLER_DISABLE 0x0 +#define CRYPTO_GENERAL_ENABLE 0x2 + +/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */ +#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000 +#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F +#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF +#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR 0x10 + +/* UECDL - Host UIC Error Code Data Link Layer 3Ch */ +#define UIC_DATA_LINK_LAYER_ERROR 0x80000000 +#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0xFFFF +#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP 0x2 +#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP 0x4 +#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP 0x8 +#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF 0x20 +#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000 +#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001 +#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002 + +/* UECN - Host UIC Error Code Network Layer 40h */ +#define UIC_NETWORK_LAYER_ERROR 0x80000000 +#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7 +#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE 0x1 +#define UIC_NETWORK_BAD_DEVICEID_ENC 0x2 +#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING 0x4 + +/* UECT - Host UIC Error Code Transport Layer 44h */ +#define UIC_TRANSPORT_LAYER_ERROR 0x80000000 +#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F +#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE 0x1 +#define UIC_TRANSPORT_UNKNOWN_CPORTID 0x2 +#define UIC_TRANSPORT_NO_CONNECTION_RX 0x4 +#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING 0x8 +#define UIC_TRANSPORT_BAD_TC 0x10 +#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW 0x20 +#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING 0x40 + +/* UECDME - Host UIC Error Code DME 48h */ +#define UIC_DME_ERROR 0x80000000 +#define UIC_DME_ERROR_CODE_MASK 0x1 + +/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */ +#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF +#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8) +#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000 +#define INT_AGGR_STATUS_BIT 0x100000 +#define INT_AGGR_PARAM_WRITE 0x1000000 +#define INT_AGGR_ENABLE 0x80000000 + +/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ +#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1 + +/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ +#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1 + +/* UICCMD - UIC Command */ +#define COMMAND_OPCODE_MASK 0xFF +#define GEN_SELECTOR_INDEX_MASK 0xFFFF + +#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) +#define RESET_LEVEL 0xFF + +#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) +#define CONFIG_RESULT_CODE_MASK 0xFF +#define GENERIC_ERROR_CODE_MASK 0xFF + +/* GenSelectorIndex calculation macros for M-PHY attributes */ +#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane) +#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane)) + +#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ + ((sel) & 0xFFFF)) +#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) +#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) +#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) + +/* Link Status*/ +enum link_status { + UFSHCD_LINK_IS_DOWN = 1, + UFSHCD_LINK_IS_UP = 2, +}; + +/* UIC Commands */ +enum uic_cmd_dme { + UIC_CMD_DME_GET = 0x01, + UIC_CMD_DME_SET = 0x02, + UIC_CMD_DME_PEER_GET = 0x03, + UIC_CMD_DME_PEER_SET = 0x04, + UIC_CMD_DME_POWERON = 0x10, + UIC_CMD_DME_POWEROFF = 0x11, + UIC_CMD_DME_ENABLE = 0x12, + UIC_CMD_DME_RESET = 0x14, + UIC_CMD_DME_END_PT_RST = 0x15, + UIC_CMD_DME_LINK_STARTUP = 0x16, + UIC_CMD_DME_HIBER_ENTER = 0x17, + UIC_CMD_DME_HIBER_EXIT = 0x18, + UIC_CMD_DME_TEST_MODE = 0x1A, +}; + +/* UIC Config result code / Generic error code */ +enum { + UIC_CMD_RESULT_SUCCESS = 0x00, + UIC_CMD_RESULT_INVALID_ATTR = 0x01, + UIC_CMD_RESULT_FAILURE = 0x01, + UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, + UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, + UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, + UIC_CMD_RESULT_BAD_INDEX = 0x05, + UIC_CMD_RESULT_LOCKED_ATTR = 0x06, + UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, + UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, + UIC_CMD_RESULT_BUSY = 0x09, + UIC_CMD_RESULT_DME_FAILURE = 0x0A, +}; + +#define MASK_UIC_COMMAND_RESULT 0xFF + +#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8) +#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0) + +/* Interrupt disable masks */ +enum { + /* Interrupt disable mask for UFSHCI v1.0 */ + INTERRUPT_MASK_ALL_VER_10 = 0x30FFF, + INTERRUPT_MASK_RW_VER_10 = 0x30000, + + /* Interrupt disable mask for UFSHCI v1.1 */ + INTERRUPT_MASK_ALL_VER_11 = 0x31FFF, + + /* Interrupt disable mask for UFSHCI v2.1 */ + INTERRUPT_MASK_ALL_VER_21 = 0x71FFF, +}; + +/* CCAP - Crypto Capability 100h */ +union ufs_crypto_capabilities { + __le32 reg_val; + struct { + u8 num_crypto_cap; + u8 config_count; + u8 reserved; + u8 config_array_ptr; + }; +}; + +enum ufs_crypto_key_size { + UFS_CRYPTO_KEY_SIZE_INVALID = 0x0, + UFS_CRYPTO_KEY_SIZE_128 = 0x1, + UFS_CRYPTO_KEY_SIZE_192 = 0x2, + UFS_CRYPTO_KEY_SIZE_256 = 0x3, + UFS_CRYPTO_KEY_SIZE_512 = 0x4, +}; + +enum ufs_crypto_alg { + UFS_CRYPTO_ALG_AES_XTS = 0x0, + UFS_CRYPTO_ALG_BITLOCKER_AES_CBC = 0x1, + UFS_CRYPTO_ALG_AES_ECB = 0x2, + UFS_CRYPTO_ALG_ESSIV_AES_CBC = 0x3, +}; + +/* x-CRYPTOCAP - Crypto Capability X */ +union ufs_crypto_cap_entry { + __le32 reg_val; + struct { + u8 algorithm_id; + u8 sdus_mask; /* Supported data unit size mask */ + u8 key_size; + u8 reserved; + }; +}; + +#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7) +#define UFS_CRYPTO_KEY_MAX_SIZE 64 +/* x-CRYPTOCFG - Crypto Configuration X */ +union ufs_crypto_cfg_entry { + __le32 reg_val[32]; + struct { + u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE]; + u8 data_unit_size; + u8 crypto_cap_idx; + u8 reserved_1; + u8 config_enable; + u8 reserved_multi_host; + u8 reserved_2; + u8 vsb[2]; + u8 reserved_3[56]; + }; +}; + +/* + * Request Descriptor Definitions + */ + +/* Transfer request command type */ +enum { + UTP_CMD_TYPE_SCSI = 0x0, + UTP_CMD_TYPE_UFS = 0x1, + UTP_CMD_TYPE_DEV_MANAGE = 0x2, +}; + +/* To accommodate UFS2.0 required Command type */ +enum { + UTP_CMD_TYPE_UFS_STORAGE = 0x1, +}; + +enum { + UTP_SCSI_COMMAND = 0x00000000, + UTP_NATIVE_UFS_COMMAND = 0x10000000, + UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, + UTP_REQ_DESC_INT_CMD = 0x01000000, + UTP_REQ_DESC_CRYPTO_ENABLE_CMD = 0x00800000, +}; + +/* UTP Transfer Request Data Direction (DD) */ +enum { + UTP_NO_DATA_TRANSFER = 0x00000000, + UTP_HOST_TO_DEVICE = 0x02000000, + UTP_DEVICE_TO_HOST = 0x04000000, +}; + +/* Overall command status values */ +enum utp_ocs { + OCS_SUCCESS = 0x0, + OCS_INVALID_CMD_TABLE_ATTR = 0x1, + OCS_INVALID_PRDT_ATTR = 0x2, + OCS_MISMATCH_DATA_BUF_SIZE = 0x3, + OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, + OCS_PEER_COMM_FAILURE = 0x5, + OCS_ABORTED = 0x6, + OCS_FATAL_ERROR = 0x7, + OCS_DEVICE_FATAL_ERROR = 0x8, + OCS_INVALID_CRYPTO_CONFIG = 0x9, + OCS_GENERAL_CRYPTO_ERROR = 0xA, + OCS_INVALID_COMMAND_STATUS = 0x0F, +}; + +enum { + MASK_OCS = 0x0F, +}; + +/* The maximum length of the data byte count field in the PRDT is 256KB */ +#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024) +/* The granularity of the data byte count field in the PRDT is 32-bit */ +#define PRDT_DATA_BYTE_COUNT_PAD 4 + +/** + * struct ufshcd_sg_entry - UFSHCI PRD Entry + * @addr: Physical address; DW-0 and DW-1. + * @reserved: Reserved for future use DW-2 + * @size: size of physical segment DW-3 + */ +struct ufshcd_sg_entry { + __le64 addr; + __le32 reserved; + __le32 size; +}; + +/** + * struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD) + * @command_upiu: Command UPIU Frame address + * @response_upiu: Response UPIU Frame address + * @prd_table: Physical Region Descriptor + */ +struct utp_transfer_cmd_desc { + u8 command_upiu[ALIGNED_UPIU_SIZE]; + u8 response_upiu[ALIGNED_UPIU_SIZE]; + struct ufshcd_sg_entry prd_table[SG_ALL]; +}; + +/** + * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD + * @dword0: Descriptor Header DW0 + * @dword1: Descriptor Header DW1 + * @dword2: Descriptor Header DW2 + * @dword3: Descriptor Header DW3 + */ +struct request_desc_header { + __le32 dword_0; + __le32 dword_1; + __le32 dword_2; + __le32 dword_3; +}; + +/** + * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD) + * @header: UTRD header DW-0 to DW-3 + * @command_desc_base_addr_lo: UCD base address low DW-4 + * @command_desc_base_addr_hi: UCD base address high DW-5 + * @response_upiu_length: response UPIU length DW-6 + * @response_upiu_offset: response UPIU offset DW-6 + * @prd_table_length: Physical region descriptor length DW-7 + * @prd_table_offset: Physical region descriptor offset DW-7 + */ +struct utp_transfer_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-5*/ + __le32 command_desc_base_addr_lo; + __le32 command_desc_base_addr_hi; + + /* DW 6 */ + __le16 response_upiu_length; + __le16 response_upiu_offset; + + /* DW 7 */ + __le16 prd_table_length; + __le16 prd_table_offset; +}; + +/* + * UTMRD structure. + */ +struct utp_task_req_desc { + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-11 - Task request UPIU structure */ + struct { + struct utp_upiu_header req_header; + __be32 input_param1; + __be32 input_param2; + __be32 input_param3; + __be32 __reserved1[2]; + } upiu_req; + + /* DW 12-19 - Task Management Response UPIU structure */ + struct { + struct utp_upiu_header rsp_header; + __be32 output_param1; + __be32 output_param2; + __be32 __reserved2[3]; + } upiu_rsp; +}; + +#endif /* End of Header */ diff --git a/include/ufs/unipro.h b/include/ufs/unipro.h new file mode 100644 index 000000000000..0521f887e3ac --- /dev/null +++ b/include/ufs/unipro.h @@ -0,0 +1,316 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + */ + +#ifndef _UNIPRO_H_ +#define _UNIPRO_H_ + +/* + * M-TX Configuration Attributes + */ +#define TX_HIBERN8TIME_CAPABILITY 0x000F +#define TX_MODE 0x0021 +#define TX_HSRATE_SERIES 0x0022 +#define TX_HSGEAR 0x0023 +#define TX_PWMGEAR 0x0024 +#define TX_AMPLITUDE 0x0025 +#define TX_HS_SLEWRATE 0x0026 +#define TX_SYNC_SOURCE 0x0027 +#define TX_HS_SYNC_LENGTH 0x0028 +#define TX_HS_PREPARE_LENGTH 0x0029 +#define TX_LS_PREPARE_LENGTH 0x002A +#define TX_HIBERN8_CONTROL 0x002B +#define TX_LCC_ENABLE 0x002C +#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D +#define TX_BYPASS_8B10B_ENABLE 0x002E +#define TX_DRIVER_POLARITY 0x002F +#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030 +#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031 +#define TX_LCC_SEQUENCER 0x0032 +#define TX_MIN_ACTIVATETIME 0x0033 +#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034 +#define TX_REFCLKFREQ 0x00EB +#define TX_CFGCLKFREQVAL 0x00EC +#define CFGEXTRATTR 0x00F0 +#define DITHERCTRL2 0x00F1 + +/* + * M-RX Configuration Attributes + */ +#define RX_MODE 0x00A1 +#define RX_HSRATE_SERIES 0x00A2 +#define RX_HSGEAR 0x00A3 +#define RX_PWMGEAR 0x00A4 +#define RX_LS_TERMINATED_ENABLE 0x00A5 +#define RX_HS_UNTERMINATED_ENABLE 0x00A6 +#define RX_ENTER_HIBERN8 0x00A7 +#define RX_BYPASS_8B10B_ENABLE 0x00A8 +#define RX_TERMINATION_FORCE_ENABLE 0x00A9 +#define RX_MIN_ACTIVATETIME_CAPABILITY 0x008F +#define RX_HIBERN8TIME_CAPABILITY 0x0092 +#define RX_REFCLKFREQ 0x00EB +#define RX_CFGCLKFREQVAL 0x00EC +#define CFGWIDEINLN 0x00F0 +#define CFGRXCDR8 0x00BA +#define ENARXDIRECTCFG4 0x00F2 +#define CFGRXOVR8 0x00BD +#define RXDIRECTCTRL2 0x00C7 +#define ENARXDIRECTCFG3 0x00F3 +#define RXCALCTRL 0x00B4 +#define ENARXDIRECTCFG2 0x00F4 +#define CFGRXOVR4 0x00E9 +#define RXSQCTRL 0x00B5 +#define CFGRXOVR6 0x00BF +#define RX_HS_G1_SYNC_LENGTH_CAP 0x008B +#define RX_HS_G1_PREP_LENGTH_CAP 0x008C +#define RX_HS_G2_SYNC_LENGTH_CAP 0x0094 +#define RX_HS_G3_SYNC_LENGTH_CAP 0x0095 +#define RX_HS_G2_PREP_LENGTH_CAP 0x0096 +#define RX_HS_G3_PREP_LENGTH_CAP 0x0097 +#define RX_ADV_GRANULARITY_CAP 0x0098 +#define RX_MIN_ACTIVATETIME_CAP 0x008F +#define RX_HIBERN8TIME_CAP 0x0092 +#define RX_ADV_HIBERN8TIME_CAP 0x0099 +#define RX_ADV_MIN_ACTIVATETIME_CAP 0x009A + + +#define is_mphy_tx_attr(attr) (attr < RX_MODE) +#define RX_ADV_FINE_GRAN_STEP(x) ((((x) & 0x3) << 1) | 0x1) +#define SYNC_LEN_FINE(x) ((x) & 0x3F) +#define SYNC_LEN_COARSE(x) ((1 << 6) | ((x) & 0x3F)) +#define PREP_LEN(x) ((x) & 0xF) + +#define RX_MIN_ACTIVATETIME_UNIT_US 100 +#define HIBERN8TIME_UNIT_US 100 + +/* + * Common Block Attributes + */ +#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B) +#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF) +#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD) +#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6) +#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA) +#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0) +#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1) +#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3) +#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8) +#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB) + +#define UNIPRO_CB_OFFSET(x) (0x8000 | x) + +/* + * PHY Adapter attributes + */ +#define PA_ACTIVETXDATALANES 0x1560 +#define PA_ACTIVERXDATALANES 0x1580 +#define PA_TXTRAILINGCLOCKS 0x1564 +#define PA_PHY_TYPE 0x1500 +#define PA_AVAILTXDATALANES 0x1520 +#define PA_AVAILRXDATALANES 0x1540 +#define PA_MINRXTRAILINGCLOCKS 0x1543 +#define PA_TXPWRSTATUS 0x1567 +#define PA_RXPWRSTATUS 0x1582 +#define PA_TXFORCECLOCK 0x1562 +#define PA_TXPWRMODE 0x1563 +#define PA_LEGACYDPHYESCDL 0x1570 +#define PA_MAXTXSPEEDFAST 0x1521 +#define PA_MAXTXSPEEDSLOW 0x1522 +#define PA_MAXRXSPEEDFAST 0x1541 +#define PA_MAXRXSPEEDSLOW 0x1542 +#define PA_TXLINKSTARTUPHS 0x1544 +#define PA_LOCAL_TX_LCC_ENABLE 0x155E +#define PA_TXSPEEDFAST 0x1565 +#define PA_TXSPEEDSLOW 0x1566 +#define PA_REMOTEVERINFO 0x15A0 +#define PA_TXGEAR 0x1568 +#define PA_TXTERMINATION 0x1569 +#define PA_HSSERIES 0x156A +#define PA_PWRMODE 0x1571 +#define PA_RXGEAR 0x1583 +#define PA_RXTERMINATION 0x1584 +#define PA_MAXRXPWMGEAR 0x1586 +#define PA_MAXRXHSGEAR 0x1587 +#define PA_RXHSUNTERMCAP 0x15A5 +#define PA_RXLSTERMCAP 0x15A6 +#define PA_GRANULARITY 0x15AA +#define PA_PACPREQTIMEOUT 0x1590 +#define PA_PACPREQEOBTIMEOUT 0x1591 +#define PA_HIBERN8TIME 0x15A7 +#define PA_LOCALVERINFO 0x15A9 +#define PA_GRANULARITY 0x15AA +#define PA_TACTIVATE 0x15A8 +#define PA_PACPFRAMECOUNT 0x15C0 +#define PA_PACPERRORCOUNT 0x15C1 +#define PA_PHYTESTCONTROL 0x15C2 +#define PA_PWRMODEUSERDATA0 0x15B0 +#define PA_PWRMODEUSERDATA1 0x15B1 +#define PA_PWRMODEUSERDATA2 0x15B2 +#define PA_PWRMODEUSERDATA3 0x15B3 +#define PA_PWRMODEUSERDATA4 0x15B4 +#define PA_PWRMODEUSERDATA5 0x15B5 +#define PA_PWRMODEUSERDATA6 0x15B6 +#define PA_PWRMODEUSERDATA7 0x15B7 +#define PA_PWRMODEUSERDATA8 0x15B8 +#define PA_PWRMODEUSERDATA9 0x15B9 +#define PA_PWRMODEUSERDATA10 0x15BA +#define PA_PWRMODEUSERDATA11 0x15BB +#define PA_CONNECTEDTXDATALANES 0x1561 +#define PA_CONNECTEDRXDATALANES 0x1581 +#define PA_LOGICALLANEMAP 0x15A1 +#define PA_SLEEPNOCONFIGTIME 0x15A2 +#define PA_STALLNOCONFIGTIME 0x15A3 +#define PA_SAVECONFIGTIME 0x15A4 +#define PA_TXHSADAPTTYPE 0x15D4 + +/* Adpat type for PA_TXHSADAPTTYPE attribute */ +#define PA_REFRESH_ADAPT 0x00 +#define PA_INITIAL_ADAPT 0x01 +#define PA_NO_ADAPT 0x03 + +#define PA_TACTIVATE_TIME_UNIT_US 10 +#define PA_HIBERN8_TIME_UNIT_US 100 + +/*Other attributes*/ +#define VS_MPHYCFGUPDT 0xD085 +#define VS_DEBUGOMC 0xD09E +#define VS_POWERSTATE 0xD083 + +#define PA_GRANULARITY_MIN_VAL 1 +#define PA_GRANULARITY_MAX_VAL 6 + +/* PHY Adapter Protocol Constants */ +#define PA_MAXDATALANES 4 + +#define DL_FC0ProtectionTimeOutVal_Default 8191 +#define DL_TC0ReplayTimeOutVal_Default 65535 +#define DL_AFC0ReqTimeOutVal_Default 32767 +#define DL_FC1ProtectionTimeOutVal_Default 8191 +#define DL_TC1ReplayTimeOutVal_Default 65535 +#define DL_AFC1ReqTimeOutVal_Default 32767 + +#define DME_LocalFC0ProtectionTimeOutVal 0xD041 +#define DME_LocalTC0ReplayTimeOutVal 0xD042 +#define DME_LocalAFC0ReqTimeOutVal 0xD043 + +/* PA power modes */ +enum { + FAST_MODE = 1, + SLOW_MODE = 2, + FASTAUTO_MODE = 4, + SLOWAUTO_MODE = 5, + UNCHANGED = 7, +}; + +#define PWRMODE_MASK 0xF +#define PWRMODE_RX_OFFSET 4 + +/* PA TX/RX Frequency Series */ +enum { + PA_HS_MODE_A = 1, + PA_HS_MODE_B = 2, +}; + +enum ufs_pwm_gear_tag { + UFS_PWM_DONT_CHANGE, /* Don't change Gear */ + UFS_PWM_G1, /* PWM Gear 1 (default for reset) */ + UFS_PWM_G2, /* PWM Gear 2 */ + UFS_PWM_G3, /* PWM Gear 3 */ + UFS_PWM_G4, /* PWM Gear 4 */ + UFS_PWM_G5, /* PWM Gear 5 */ + UFS_PWM_G6, /* PWM Gear 6 */ + UFS_PWM_G7, /* PWM Gear 7 */ +}; + +enum ufs_hs_gear_tag { + UFS_HS_DONT_CHANGE, /* Don't change Gear */ + UFS_HS_G1, /* HS Gear 1 (default for reset) */ + UFS_HS_G2, /* HS Gear 2 */ + UFS_HS_G3, /* HS Gear 3 */ + UFS_HS_G4, /* HS Gear 4 */ +}; + +enum ufs_unipro_ver { + UFS_UNIPRO_VER_RESERVED = 0, + UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */ + UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */ + UFS_UNIPRO_VER_1_6 = 3, /* UniPro version 1.6 */ + UFS_UNIPRO_VER_1_61 = 4, /* UniPro version 1.61 */ + UFS_UNIPRO_VER_1_8 = 5, /* UniPro version 1.8 */ + UFS_UNIPRO_VER_MAX = 6, /* UniPro unsupported version */ + /* UniPro version field mask in PA_LOCALVERINFO */ + UFS_UNIPRO_VER_MASK = 0xF, +}; + +/* + * Data Link Layer Attributes + */ +#define DL_TC0TXFCTHRESHOLD 0x2040 +#define DL_FC0PROTTIMEOUTVAL 0x2041 +#define DL_TC0REPLAYTIMEOUTVAL 0x2042 +#define DL_AFC0REQTIMEOUTVAL 0x2043 +#define DL_AFC0CREDITTHRESHOLD 0x2044 +#define DL_TC0OUTACKTHRESHOLD 0x2045 +#define DL_TC1TXFCTHRESHOLD 0x2060 +#define DL_FC1PROTTIMEOUTVAL 0x2061 +#define DL_TC1REPLAYTIMEOUTVAL 0x2062 +#define DL_AFC1REQTIMEOUTVAL 0x2063 +#define DL_AFC1CREDITTHRESHOLD 0x2064 +#define DL_TC1OUTACKTHRESHOLD 0x2065 +#define DL_TXPREEMPTIONCAP 0x2000 +#define DL_TC0TXMAXSDUSIZE 0x2001 +#define DL_TC0RXINITCREDITVAL 0x2002 +#define DL_TC0TXBUFFERSIZE 0x2005 +#define DL_PEERTC0PRESENT 0x2046 +#define DL_PEERTC0RXINITCREVAL 0x2047 +#define DL_TC1TXMAXSDUSIZE 0x2003 +#define DL_TC1RXINITCREDITVAL 0x2004 +#define DL_TC1TXBUFFERSIZE 0x2006 +#define DL_PEERTC1PRESENT 0x2066 +#define DL_PEERTC1RXINITCREVAL 0x2067 + +/* + * Network Layer Attributes + */ +#define N_DEVICEID 0x3000 +#define N_DEVICEID_VALID 0x3001 +#define N_TC0TXMAXSDUSIZE 0x3020 +#define N_TC1TXMAXSDUSIZE 0x3021 + +/* + * Transport Layer Attributes + */ +#define T_NUMCPORTS 0x4000 +#define T_NUMTESTFEATURES 0x4001 +#define T_CONNECTIONSTATE 0x4020 +#define T_PEERDEVICEID 0x4021 +#define T_PEERCPORTID 0x4022 +#define T_TRAFFICCLASS 0x4023 +#define T_PROTOCOLID 0x4024 +#define T_CPORTFLAGS 0x4025 +#define T_TXTOKENVALUE 0x4026 +#define T_RXTOKENVALUE 0x4027 +#define T_LOCALBUFFERSPACE 0x4028 +#define T_PEERBUFFERSPACE 0x4029 +#define T_CREDITSTOSEND 0x402A +#define T_CPORTMODE 0x402B +#define T_TC0TXMAXSDUSIZE 0x4060 +#define T_TC1TXMAXSDUSIZE 0x4061 + +/* CPort setting */ +#define E2EFC_ON (1 << 0) +#define E2EFC_OFF (0 << 0) +#define CSD_N_ON (0 << 1) +#define CSD_N_OFF (1 << 1) +#define CSV_N_ON (0 << 2) +#define CSV_N_OFF (1 << 2) +#define CPORT_DEF_FLAGS (CSV_N_OFF | CSD_N_OFF | E2EFC_OFF) + +/* CPort connection state */ +enum { + CPORT_IDLE = 0, + CPORT_CONNECTED, +}; + +#endif /* _UNIPRO_H_ */ -- cgit v1.2.3