From a864e8f159b13babf552aff14a5fbe11abc017e4 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 1 Mar 2021 18:01:46 -0600 Subject: ALSA: hda: intel-nhlt: verify config type Multiple bug reports report issues with the SOF and SST drivers when dealing with single microphone cases. We currently read the DMIC array information unconditionally but we don't check that the configuration type is actually a mic array. When the DMIC link does not rely on a mic array configuration, the recommendation is to check the format information to infer the maximum number of channels, and map this to the number of microphones. This leaves a potential for a mismatch between actual microphones available in hardware and what the ACPI table contains, but we have no other source of information. Note that single microphone configurations can alternatively be handled with a 'mic array' configuration along with a 'vendor-defined' geometry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201251 BugLink: https://github.com/thesofproject/linux/issues/2725 Fixes: 7a33ea70e1868 ('ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20210302000146.1177770-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai --- include/sound/intel-nhlt.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/sound/intel-nhlt.h b/include/sound/intel-nhlt.h index 743c2f442280..d0574805865f 100644 --- a/include/sound/intel-nhlt.h +++ b/include/sound/intel-nhlt.h @@ -112,6 +112,11 @@ struct nhlt_vendor_dmic_array_config { /* TODO add vendor mic config */ } __packed; +enum { + NHLT_CONFIG_TYPE_GENERIC = 0, + NHLT_CONFIG_TYPE_MIC_ARRAY = 1 +}; + enum { NHLT_MIC_ARRAY_2CH_SMALL = 0xa, NHLT_MIC_ARRAY_2CH_BIG = 0xb, -- cgit v1.2.3 From c7929b15b6e926c7150d9ec64844aceecf8a7a4a Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 1 Mar 2021 18:31:19 -0600 Subject: ASoC: soc-acpi: allow for partial match in parent name To change the module dependencies and simplify Kconfigs, we need to introduce new driver names (sof-audio-acpi-intel-byt and sof-audio-acpi-intel-bdw), and move from an exact string match to a partial one. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Reviewed-by: Bard Liao Acked-by: Mark Brown Acked-by: Vinod Koul Link: https://lore.kernel.org/r/20210302003125.1178419-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai --- include/sound/soc-acpi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc-acpi.h b/include/sound/soc-acpi.h index 9a43c44dcbbb..c45075024c30 100644 --- a/include/sound/soc-acpi.h +++ b/include/sound/soc-acpi.h @@ -174,7 +174,7 @@ struct snd_soc_acpi_codecs { static inline bool snd_soc_acpi_sof_parent(struct device *dev) { return dev->parent && dev->parent->driver && dev->parent->driver->name && - !strcmp(dev->parent->driver->name, "sof-audio-acpi"); + !strncmp(dev->parent->driver->name, "sof-audio-acpi", strlen("sof-audio-acpi")); } #endif -- cgit v1.2.3 From 08c2a4bc9f2acaefbd0158866db5cb3238a68674 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 1 Mar 2021 18:31:24 -0600 Subject: ALSA: hda: move Intel SoundWire ACPI scan to dedicated module The ACPI scan capabilities is called from the intel-dspconfig as well as the SOF/HDaudio drivers. This creates dependencies and randconfig issues when HDaudio and SOF/SoundWire are not all configured as modules. To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and intel-dspconfig, move the ACPI scan helpers to a dedicated module. This follows the same idea as NHLT helpers which are already handled as a dedicated module. The only functional change is that the kernel parameter to filter links is now handled by a different module, but that was only provided for developers needing work-arounds for early BIOS releases. Reported-by: Arnd Bergmann Signed-off-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Reviewed-by: Bard Liao Acked-by: Mark Brown Acked-by: Vinod Koul Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai --- drivers/soundwire/intel.h | 2 - drivers/soundwire/intel_init.c | 158 -------------------------------- include/linux/soundwire/sdw_intel.h | 2 + sound/hda/Kconfig | 4 + sound/hda/Makefile | 3 + sound/hda/intel-dsp-config.c | 2 +- sound/hda/intel-sdw-acpi.c | 174 ++++++++++++++++++++++++++++++++++++ sound/soc/sof/intel/Kconfig | 1 + sound/soc/sof/intel/hda.c | 1 + 9 files changed, 186 insertions(+), 161 deletions(-) create mode 100644 sound/hda/intel-sdw-acpi.c (limited to 'include') diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h index 76820d0b9deb..06bac8ba14e9 100644 --- a/drivers/soundwire/intel.h +++ b/drivers/soundwire/intel.h @@ -48,8 +48,6 @@ struct sdw_intel { #endif }; -#define SDW_INTEL_QUIRK_MASK_BUS_DISABLE BIT(1) - int intel_master_startup(struct platform_device *pdev); int intel_master_process_wakeen_event(struct platform_device *pdev); diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index bc8520eb385e..05b726cdfebc 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -18,42 +18,12 @@ #include "cadence_master.h" #include "intel.h" -#define SDW_LINK_TYPE 4 /* from Intel ACPI documentation */ -#define SDW_MAX_LINKS 4 #define SDW_SHIM_LCAP 0x0 #define SDW_SHIM_BASE 0x2C000 #define SDW_ALH_BASE 0x2C800 #define SDW_LINK_BASE 0x30000 #define SDW_LINK_SIZE 0x10000 -static int ctrl_link_mask; -module_param_named(sdw_link_mask, ctrl_link_mask, int, 0444); -MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)"); - -static bool is_link_enabled(struct fwnode_handle *fw_node, int i) -{ - struct fwnode_handle *link; - char name[32]; - u32 quirk_mask = 0; - - /* Find master handle */ - snprintf(name, sizeof(name), - "mipi-sdw-link-%d-subproperties", i); - - link = fwnode_get_named_child_node(fw_node, name); - if (!link) - return false; - - fwnode_property_read_u32(link, - "intel-quirk-mask", - &quirk_mask); - - if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) - return false; - - return true; -} - static int sdw_intel_cleanup(struct sdw_intel_ctx *ctx) { struct sdw_intel_link_res *link = ctx->links; @@ -81,74 +51,6 @@ static int sdw_intel_cleanup(struct sdw_intel_ctx *ctx) return 0; } -static int -sdw_intel_scan_controller(struct sdw_intel_acpi_info *info) -{ - struct acpi_device *adev; - int ret, i; - u8 count; - - if (acpi_bus_get_device(info->handle, &adev)) - return -EINVAL; - - /* Found controller, find links supported */ - count = 0; - ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), - "mipi-sdw-master-count", &count, 1); - - /* - * In theory we could check the number of links supported in - * hardware, but in that step we cannot assume SoundWire IP is - * powered. - * - * In addition, if the BIOS doesn't even provide this - * 'master-count' property then all the inits based on link - * masks will fail as well. - * - * We will check the hardware capabilities in the startup() step - */ - - if (ret) { - dev_err(&adev->dev, - "Failed to read mipi-sdw-master-count: %d\n", ret); - return -EINVAL; - } - - /* Check count is within bounds */ - if (count > SDW_MAX_LINKS) { - dev_err(&adev->dev, "Link count %d exceeds max %d\n", - count, SDW_MAX_LINKS); - return -EINVAL; - } - - if (!count) { - dev_warn(&adev->dev, "No SoundWire links detected\n"); - return -EINVAL; - } - dev_dbg(&adev->dev, "ACPI reports %d SDW Link devices\n", count); - - info->count = count; - info->link_mask = 0; - - for (i = 0; i < count; i++) { - if (ctrl_link_mask && !(ctrl_link_mask & BIT(i))) { - dev_dbg(&adev->dev, - "Link %d masked, will not be enabled\n", i); - continue; - } - - if (!is_link_enabled(acpi_fwnode_handle(adev), i)) { - dev_dbg(&adev->dev, - "Link %d not selected in firmware\n", i); - continue; - } - - info->link_mask |= BIT(i); - } - - return 0; -} - #define HDA_DSP_REG_ADSPIC2 (0x10) #define HDA_DSP_REG_ADSPIS2 (0x14) #define HDA_DSP_REG_ADSPIC2_SNDW BIT(5) @@ -357,66 +259,6 @@ sdw_intel_startup_controller(struct sdw_intel_ctx *ctx) return 0; } -static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, - void *cdata, void **return_value) -{ - struct sdw_intel_acpi_info *info = cdata; - struct acpi_device *adev; - acpi_status status; - u64 adr; - - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) - return AE_OK; /* keep going */ - - if (acpi_bus_get_device(handle, &adev)) { - pr_err("%s: Couldn't find ACPI handle\n", __func__); - return AE_NOT_FOUND; - } - - info->handle = handle; - - /* - * On some Intel platforms, multiple children of the HDAS - * device can be found, but only one of them is the SoundWire - * controller. The SNDW device is always exposed with - * Name(_ADR, 0x40000000), with bits 31..28 representing the - * SoundWire link so filter accordingly - */ - if (FIELD_GET(GENMASK(31, 28), adr) != SDW_LINK_TYPE) - return AE_OK; /* keep going */ - - /* device found, stop namespace walk */ - return AE_CTRL_TERMINATE; -} - -/** - * sdw_intel_acpi_scan() - SoundWire Intel init routine - * @parent_handle: ACPI parent handle - * @info: description of what firmware/DSDT tables expose - * - * This scans the namespace and queries firmware to figure out which - * links to enable. A follow-up use of sdw_intel_probe() and - * sdw_intel_startup() is required for creation of devices and bus - * startup - */ -int sdw_intel_acpi_scan(acpi_handle *parent_handle, - struct sdw_intel_acpi_info *info) -{ - acpi_status status; - - info->handle = NULL; - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, - parent_handle, 1, - sdw_intel_acpi_cb, - NULL, info, NULL); - if (ACPI_FAILURE(status) || info->handle == NULL) - return -ENODEV; - - return sdw_intel_scan_controller(info); -} -EXPORT_SYMBOL_NS(sdw_intel_acpi_scan, SOUNDWIRE_INTEL_INIT); - /** * sdw_intel_probe() - SoundWire Intel probe routine * @res: resource data diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h index 120ffddc03d2..3a5446ac014a 100644 --- a/include/linux/soundwire/sdw_intel.h +++ b/include/linux/soundwire/sdw_intel.h @@ -187,4 +187,6 @@ void sdw_intel_enable_irq(void __iomem *mmio_base, bool enable); irqreturn_t sdw_intel_thread(int irq, void *dev_id); +#define SDW_INTEL_QUIRK_MASK_BUS_DISABLE BIT(1) + #endif diff --git a/sound/hda/Kconfig b/sound/hda/Kconfig index 9ed5cfa3c18c..57595f1552c9 100644 --- a/sound/hda/Kconfig +++ b/sound/hda/Kconfig @@ -44,9 +44,13 @@ config SND_INTEL_NHLT config SND_INTEL_DSP_CONFIG tristate select SND_INTEL_NHLT if ACPI + select SND_INTEL_SOUNDWIRE_ACPI if ACPI # this config should be selected only for Intel DSP platforms. # A fallback is provided so that the code compiles in all cases. +config SND_INTEL_SOUNDWIRE_ACPI + tristate + config SND_INTEL_BYT_PREFER_SOF bool "Prefer SOF driver over SST on BY/CHT platforms" depends on SND_SST_ATOM_HIFI2_PLATFORM_ACPI && SND_SOC_SOF_BAYTRAIL diff --git a/sound/hda/Makefile b/sound/hda/Makefile index 601e617918b8..78f487a635f8 100644 --- a/sound/hda/Makefile +++ b/sound/hda/Makefile @@ -17,3 +17,6 @@ obj-$(CONFIG_SND_HDA_EXT_CORE) += ext/ snd-intel-dspcfg-objs := intel-dsp-config.o snd-intel-dspcfg-$(CONFIG_SND_INTEL_NHLT) += intel-nhlt.o obj-$(CONFIG_SND_INTEL_DSP_CONFIG) += snd-intel-dspcfg.o + +snd-intel-sdw-acpi-objs := intel-sdw-acpi.o +obj-$(CONFIG_SND_INTEL_SOUNDWIRE_ACPI) += snd-intel-sdw-acpi.o diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index d1eb9d34993a..ab5ff7867eb9 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -557,4 +557,4 @@ EXPORT_SYMBOL_GPL(snd_intel_acpi_dsp_driver_probe); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Intel DSP config driver"); -MODULE_IMPORT_NS(SOUNDWIRE_INTEL_INIT); +MODULE_IMPORT_NS(SND_INTEL_SOUNDWIRE_ACPI); diff --git a/sound/hda/intel-sdw-acpi.c b/sound/hda/intel-sdw-acpi.c new file mode 100644 index 000000000000..6359936a1503 --- /dev/null +++ b/sound/hda/intel-sdw-acpi.c @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-2021 Intel Corporation. + +/* + * SDW Intel ACPI scan helpers + */ + +#include +#include +#include +#include +#include + +#define SDW_LINK_TYPE 4 /* from Intel ACPI documentation */ +#define SDW_MAX_LINKS 4 + +static int ctrl_link_mask; +module_param_named(sdw_link_mask, ctrl_link_mask, int, 0444); +MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)"); + +static bool is_link_enabled(struct fwnode_handle *fw_node, int i) +{ + struct fwnode_handle *link; + char name[32]; + u32 quirk_mask = 0; + + /* Find master handle */ + snprintf(name, sizeof(name), + "mipi-sdw-link-%d-subproperties", i); + + link = fwnode_get_named_child_node(fw_node, name); + if (!link) + return false; + + fwnode_property_read_u32(link, + "intel-quirk-mask", + &quirk_mask); + + if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) + return false; + + return true; +} + +static int +sdw_intel_scan_controller(struct sdw_intel_acpi_info *info) +{ + struct acpi_device *adev; + int ret, i; + u8 count; + + if (acpi_bus_get_device(info->handle, &adev)) + return -EINVAL; + + /* Found controller, find links supported */ + count = 0; + ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), + "mipi-sdw-master-count", &count, 1); + + /* + * In theory we could check the number of links supported in + * hardware, but in that step we cannot assume SoundWire IP is + * powered. + * + * In addition, if the BIOS doesn't even provide this + * 'master-count' property then all the inits based on link + * masks will fail as well. + * + * We will check the hardware capabilities in the startup() step + */ + + if (ret) { + dev_err(&adev->dev, + "Failed to read mipi-sdw-master-count: %d\n", ret); + return -EINVAL; + } + + /* Check count is within bounds */ + if (count > SDW_MAX_LINKS) { + dev_err(&adev->dev, "Link count %d exceeds max %d\n", + count, SDW_MAX_LINKS); + return -EINVAL; + } + + if (!count) { + dev_warn(&adev->dev, "No SoundWire links detected\n"); + return -EINVAL; + } + dev_dbg(&adev->dev, "ACPI reports %d SDW Link devices\n", count); + + info->count = count; + info->link_mask = 0; + + for (i = 0; i < count; i++) { + if (ctrl_link_mask && !(ctrl_link_mask & BIT(i))) { + dev_dbg(&adev->dev, + "Link %d masked, will not be enabled\n", i); + continue; + } + + if (!is_link_enabled(acpi_fwnode_handle(adev), i)) { + dev_dbg(&adev->dev, + "Link %d not selected in firmware\n", i); + continue; + } + + info->link_mask |= BIT(i); + } + + return 0; +} + +static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, + void *cdata, void **return_value) +{ + struct sdw_intel_acpi_info *info = cdata; + struct acpi_device *adev; + acpi_status status; + u64 adr; + + status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); + if (ACPI_FAILURE(status)) + return AE_OK; /* keep going */ + + if (acpi_bus_get_device(handle, &adev)) { + pr_err("%s: Couldn't find ACPI handle\n", __func__); + return AE_NOT_FOUND; + } + + info->handle = handle; + + /* + * On some Intel platforms, multiple children of the HDAS + * device can be found, but only one of them is the SoundWire + * controller. The SNDW device is always exposed with + * Name(_ADR, 0x40000000), with bits 31..28 representing the + * SoundWire link so filter accordingly + */ + if (FIELD_GET(GENMASK(31, 28), adr) != SDW_LINK_TYPE) + return AE_OK; /* keep going */ + + /* device found, stop namespace walk */ + return AE_CTRL_TERMINATE; +} + +/** + * sdw_intel_acpi_scan() - SoundWire Intel init routine + * @parent_handle: ACPI parent handle + * @info: description of what firmware/DSDT tables expose + * + * This scans the namespace and queries firmware to figure out which + * links to enable. A follow-up use of sdw_intel_probe() and + * sdw_intel_startup() is required for creation of devices and bus + * startup + */ +int sdw_intel_acpi_scan(acpi_handle *parent_handle, + struct sdw_intel_acpi_info *info) +{ + acpi_status status; + + info->handle = NULL; + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + parent_handle, 1, + sdw_intel_acpi_cb, + NULL, info, NULL); + if (ACPI_FAILURE(status) || info->handle == NULL) + return -ENODEV; + + return sdw_intel_scan_controller(info); +} +EXPORT_SYMBOL_NS(sdw_intel_acpi_scan, SND_INTEL_SOUNDWIRE_ACPI); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Intel Soundwire ACPI helpers"); diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig index 21e24a3c64fb..da1c396f529d 100644 --- a/sound/soc/sof/intel/Kconfig +++ b/sound/soc/sof/intel/Kconfig @@ -286,6 +286,7 @@ config SND_SOC_SOF_INTEL_SOUNDWIRE depends on ACPI && SOUNDWIRE depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y) select SOUNDWIRE_INTEL + select SND_INTEL_SOUNDWIRE_ACPI help This adds support for SoundWire with Sound Open Firmware for Intel(R) platforms. diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 995a8c427177..1d29b1fd6a94 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -1279,4 +1279,5 @@ MODULE_IMPORT_NS(SND_SOC_SOF_PCI_DEV); MODULE_IMPORT_NS(SND_SOC_SOF_HDA_AUDIO_CODEC); MODULE_IMPORT_NS(SND_SOC_SOF_HDA_AUDIO_CODEC_I915); MODULE_IMPORT_NS(SND_SOC_SOF_XTENSA); +MODULE_IMPORT_NS(SND_INTEL_SOUNDWIRE_ACPI); MODULE_IMPORT_NS(SOUNDWIRE_INTEL_INIT); -- cgit v1.2.3