From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- net/802/hippi.c | 234 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 net/802/hippi.c (limited to 'net/802/hippi.c') diff --git a/net/802/hippi.c b/net/802/hippi.c new file mode 100644 index 000000000000..4eb135c0afbb --- /dev/null +++ b/net/802/hippi.c @@ -0,0 +1,234 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * HIPPI-type device handling. + * + * Version: @(#)hippi.c 1.0.0 05/29/97 + * + * Authors: Ross Biro, + * Fred N. van Kempen, + * Mark Evans, + * Florian La Roche, + * Alan Cox, + * Jes Sorensen, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Create the HIPPI MAC header for an arbitrary protocol layer + * + * saddr=NULL means use device source address + * daddr=NULL means leave destination address (eg unresolved arp) + */ + +static int hippi_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, void *daddr, void *saddr, + unsigned len) +{ + struct hippi_hdr *hip = (struct hippi_hdr *)skb_push(skb, HIPPI_HLEN); + + if (!len){ + len = skb->len - HIPPI_HLEN; + printk("hippi_header(): length not supplied\n"); + } + + /* + * Due to the stupidity of the little endian byte-order we + * have to set the fp field this way. + */ + hip->fp.fixed = __constant_htonl(0x04800018); + hip->fp.d2_size = htonl(len + 8); + hip->le.fc = 0; + hip->le.double_wide = 0; /* only HIPPI 800 for the time being */ + hip->le.message_type = 0; /* Data PDU */ + + hip->le.dest_addr_type = 2; /* 12 bit SC address */ + hip->le.src_addr_type = 2; /* 12 bit SC address */ + + memcpy(hip->le.src_switch_addr, dev->dev_addr + 3, 3); + memset(&hip->le.reserved, 0, 16); + + hip->snap.dsap = HIPPI_EXTENDED_SAP; + hip->snap.ssap = HIPPI_EXTENDED_SAP; + hip->snap.ctrl = HIPPI_UI_CMD; + hip->snap.oui[0] = 0x00; + hip->snap.oui[1] = 0x00; + hip->snap.oui[2] = 0x00; + hip->snap.ethertype = htons(type); + + if (daddr) + { + memcpy(hip->le.dest_switch_addr, daddr + 3, 3); + memcpy(&skb->private.ifield, daddr + 2, 4); + return HIPPI_HLEN; + } + return -((int)HIPPI_HLEN); +} + + +/* + * Rebuild the HIPPI MAC header. This is called after an ARP has + * completed on this sk_buff. We now let ARP fill in the other fields. + */ + +static int hippi_rebuild_header(struct sk_buff *skb) +{ + struct hippi_hdr *hip = (struct hippi_hdr *)skb->data; + + /* + * Only IP is currently supported + */ + + if(hip->snap.ethertype != __constant_htons(ETH_P_IP)) + { + printk(KERN_DEBUG "%s: unable to resolve type %X addresses.\n",skb->dev->name,ntohs(hip->snap.ethertype)); + return 0; + } + + /* + * We don't support dynamic ARP on HIPPI, but we use the ARP + * static ARP tables to hold the I-FIELDs. + */ + return arp_find(hip->le.daddr, skb); +} + + +/* + * Determine the packet's protocol ID. + */ + +unsigned short hippi_type_trans(struct sk_buff *skb, struct net_device *dev) +{ + struct hippi_hdr *hip; + + hip = (struct hippi_hdr *) skb->data; + + /* + * This is actually wrong ... question is if we really should + * set the raw address here. + */ + skb->mac.raw = skb->data; + skb_pull(skb, HIPPI_HLEN); + + /* + * No fancy promisc stuff here now. + */ + + return hip->snap.ethertype; +} + +EXPORT_SYMBOL(hippi_type_trans); + +static int hippi_change_mtu(struct net_device *dev, int new_mtu) +{ + /* + * HIPPI's got these nice large MTUs. + */ + if ((new_mtu < 68) || (new_mtu > 65280)) + return -EINVAL; + dev->mtu = new_mtu; + return(0); +} + +/* + * For HIPPI we will actually use the lower 4 bytes of the hardware + * address as the I-FIELD rather than the actual hardware address. + */ +static int hippi_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + if (netif_running(dev)) + return -EBUSY; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + return 0; +} + +static int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) +{ + /* Never send broadcast/multicast ARP messages */ + p->mcast_probes = 0; + + /* In IPv6 unicast probes are valid even on NBMA, + * because they are encapsulated in normal IPv6 protocol. + * Should be a generic flag. + */ + if (p->tbl->family != AF_INET6) + p->ucast_probes = 0; + return 0; +} + +static void hippi_setup(struct net_device *dev) +{ + dev->set_multicast_list = NULL; + dev->change_mtu = hippi_change_mtu; + dev->hard_header = hippi_header; + dev->rebuild_header = hippi_rebuild_header; + dev->set_mac_address = hippi_mac_addr; + dev->hard_header_parse = NULL; + dev->hard_header_cache = NULL; + dev->header_cache_update = NULL; + dev->neigh_setup = hippi_neigh_setup_dev; + + /* + * We don't support HIPPI `ARP' for the time being, and probably + * never will unless someone else implements it. However we + * still need a fake ARPHRD to make ifconfig and friends play ball. + */ + dev->type = ARPHRD_HIPPI; + dev->hard_header_len = HIPPI_HLEN; + dev->mtu = 65280; + dev->addr_len = HIPPI_ALEN; + dev->tx_queue_len = 25 /* 5 */; + memset(dev->broadcast, 0xFF, HIPPI_ALEN); + + + /* + * HIPPI doesn't support broadcast+multicast and we only use + * static ARP tables. ARP is disabled by hippi_neigh_setup_dev. + */ + dev->flags = 0; +} + +/** + * alloc_hippi_dev - Register HIPPI device + * @sizeof_priv: Size of additional driver-private structure to be allocated + * for this HIPPI device + * + * Fill in the fields of the device structure with HIPPI-generic values. + * + * Constructs a new net device, complete with a private data area of + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for + * this private data area. + */ + +struct net_device *alloc_hippi_dev(int sizeof_priv) +{ + return alloc_netdev(sizeof_priv, "hip%d", hippi_setup); +} + +EXPORT_SYMBOL(alloc_hippi_dev); -- cgit v1.2.3