From d60277ac3fc9c9f7887ff813c98d0a71ac2abde2 Mon Sep 17 00:00:00 2001 From: Michael-CY Lee Date: Tue, 23 Jan 2024 13:47:52 +0800 Subject: wifi: mac80211: apply duration for SW scan This patch makes duration in scan request be applicable when using SW scan, but only accepts durations greater than the default value for the following reasons: 1. Most APs have a beacoon interval of 100ms. 2. Sending and receiving probe require some delay. 3. Setting channel to HW also requires some delays Signed-off-by: Michael-CY Lee Link: https://msgid.link/20240123054752.22833-1-michael-cy.lee@mediatek.com Signed-off-by: Johannes Berg --- net/mac80211/scan.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 645355e5f1bc..8adcb23262f5 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -671,7 +671,10 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, * After sending probe requests, wait for probe responses * on the channel. */ - *next_delay = IEEE80211_CHANNEL_TIME; + *next_delay = msecs_to_jiffies(scan_req->duration) > + IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME ? + msecs_to_jiffies(scan_req->duration) - IEEE80211_PROBE_DELAY : + IEEE80211_CHANNEL_TIME; local->next_scan_state = SCAN_DECISION; } @@ -994,7 +997,10 @@ set_channel: */ if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) || !scan_req->n_ssids) { - *next_delay = IEEE80211_PASSIVE_CHANNEL_TIME; + *next_delay = msecs_to_jiffies(scan_req->duration) > + IEEE80211_PASSIVE_CHANNEL_TIME ? + msecs_to_jiffies(scan_req->duration) : + IEEE80211_PASSIVE_CHANNEL_TIME; local->next_scan_state = SCAN_DECISION; if (scan_req->n_ssids) set_bit(SCAN_BEACON_WAIT, &local->scanning); -- cgit v1.2.3