From 3753fcc22974affa26160ce1c46a6ebaaaa86758 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 31 May 2022 15:07:49 +0200 Subject: ALSA: usb-audio: Optimize TEAC clock quirk Maris found out that the quirk for TEAC devices to work around the clock setup is needed to apply only when the base clock is changed, e.g. from 48000-based clocks (48000, 96000, 192000, 384000) to 44100-based clocks (44100, 88200, 176400, 352800), or vice versa, while switching to another clock with the same base clock doesn't need the (forcible) interface setup. This patch implements the optimization for the TEAC clock quirk to avoid the unnecessary interface re-setup. Fixes: 5ce0b06ae5e6 ("ALSA: usb-audio: Workaround for clock setup on TEAC devices") Reported-by: Maris Abele Cc: Link: https://lore.kernel.org/r/20220531130749.30357-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/clock.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 3c435d379306..33db334e6556 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -573,10 +573,14 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, } /* FIXME - TEAC devices require the immediate interface setup */ - if (rate != prev_rate && USB_ID_VENDOR(chip->usb_id) == 0x0644) { - usb_set_interface(chip->dev, fmt->iface, fmt->altsetting); - if (chip->quirk_flags & QUIRK_FLAG_IFACE_DELAY) - msleep(50); + if (USB_ID_VENDOR(chip->usb_id) == 0x0644) { + bool cur_base_48k = (rate % 48000 == 0); + bool prev_base_48k = (prev_rate % 48000 == 0); + if (cur_base_48k != prev_base_48k) { + usb_set_interface(chip->dev, fmt->iface, fmt->altsetting); + if (chip->quirk_flags & QUIRK_FLAG_IFACE_DELAY) + msleep(50); + } } validation: -- cgit v1.2.3