// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* * Copyright (C) 2024 Ryan Walklin . */ #include "sun50i-h700-anbernic-rg35xx-2024.dts" / { model = "Anbernic RG35XX Plus"; compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700"; wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; pinctrl-0 = <&x32clk_fanout_pin>; pinctrl-names = "default"; post-power-on-delay-ms = <200>; reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ }; }; /* SDIO WiFi RTL8821CS */ &mmc1 { vmmc-supply = <®_cldo4>; vqmmc-supply = <®_aldo4>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; sdio_wifi: wifi@1 { reg = <1>; interrupt-parent = <&pio>; interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */ interrupt-names = "host-wake"; }; }; /* Bluetooth RTL8821CS */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */ enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */ host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */ }; };