// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright 2022 Google LLC
 */

/dts-v1/;
#include "mt8186-corsola.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	aliases {
		i2c4 = &i2c4;
	};
};

&dsi_out {
	remote-endpoint = <&ps8640_in>;
};

&i2c0 {
	clock-frequency = <400000>;

	edp-bridge@8 {
		compatible = "parade,ps8640";
		reg = <0x8>;
		pinctrl-names = "default";
		pinctrl-0 = <&ps8640_pins>;
		powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
		reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
		vdd12-supply = <&mt6366_vrf12_reg>;
		vdd33-supply = <&mt6366_vcn33_reg>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				ps8640_in: endpoint {
					remote-endpoint = <&dsi_out>;
				};
			};

			port@1 {
				reg = <1>;

				ps8640_out: endpoint {
					remote-endpoint = <&panel_in>;
				};
			};
		};

		aux-bus {
			panel {
				compatible = "edp-panel";
				power-supply = <&pp3300_disp_x>;
				backlight = <&backlight_lcd0>;

				port {
					panel_in: endpoint {
						remote-endpoint = <&ps8640_out>;
					};
				};
			};
		};
	};
};

&i2c1 {
	i2c-scl-internal-delay-ns = <10000>;

	touchscreen: touchscreen@10 {
		compatible = "hid-over-i2c";
		reg = <0x10>;
		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&touchscreen_pins>;
		post-power-on-delay-ms = <10>;
		hid-descr-addr = <0x0001>;
		vdd-supply = <&pp3300_s3>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;
	clock-frequency = <400000>;
	status = "okay";

	proximity@28 {
		compatible = "semtech,sx9324";
		reg = <0x28>;
		#io-channel-cells = <1>;
		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&sar_sensor_pins>;
		vdd-supply = <&mt6366_vio18_reg>;
		svdd-supply = <&mt6366_vio18_reg>;
	};
};

&pio {
	i2c4_pins: i2c4-pins {
		pins-bus {
			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
				 <PINMUX_GPIO135__FUNC_SCL4>;
			bias-disable;
			drive-strength = <4>;
			input-enable;
		};
	};

	ps8640_pins: ps8640-pins {
		pins-pwrdn-rst {
			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
				 <PINMUX_GPIO98__FUNC_GPIO98>;
			output-low;
		};
	};

	sar_sensor_pins: sar-sensor-pins {
		pins-irq {
			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
			input-enable;
			bias-pull-up;
		};
	};
};