#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # # In-place tunneling BPF_FILE="test_tc_tunnel.bpf.o" # must match the port that the bpf program filters on readonly port=8000 readonly ns_prefix="ns-$$-" readonly ns1="${ns_prefix}1" readonly ns2="${ns_prefix}2" readonly ns1_v4=192.168.1.1 readonly ns2_v4=192.168.1.2 readonly ns1_v6=fd::1 readonly ns2_v6=fd::2 # Must match port used by bpf program readonly udpport=5555 # MPLSoverUDP readonly mplsudpport=6635 readonly mplsproto=137 readonly infile="$(mktemp)" readonly outfile="$(mktemp)" setup() { ip netns add "${ns1}" ip netns add "${ns2}" ip link add dev veth1 mtu 1500 netns "${ns1}" type veth \ peer name veth2 mtu 1500 netns "${ns2}" ip netns exec "${ns1}" ethtool -K veth1 tso off ip -netns "${ns1}" link set veth1 up ip -netns "${ns2}" link set veth2 up ip -netns "${ns1}" -4 addr add "${ns1_v4}/24" dev veth1 ip -netns "${ns2}" -4 addr add "${ns2_v4}/24" dev veth2 ip -netns "${ns1}" -6 addr add "${ns1_v6}/64" dev veth1 nodad ip -netns "${ns2}" -6 addr add "${ns2_v6}/64" dev veth2 nodad # clamp route to reserve room for tunnel headers ip -netns "${ns1}" -4 route flush table main ip -netns "${ns1}" -6 route flush table main ip -netns "${ns1}" -4 route add "${ns2_v4}" mtu 1450 dev veth1 ip -netns "${ns1}" -6 route add "${ns2_v6}" mtu 1430 dev veth1 sleep 1 dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none } cleanup() { ip netns del "${ns2}" ip netns del "${ns1}" if [[ -f "${outfile}" ]]; then rm "${outfile}" fi if [[ -f "${infile}" ]]; then rm "${infile}" fi if [[ -n $server_pid ]]; then kill $server_pid 2> /dev/null fi } server_listen() { ip netns exec "${ns2}" nc "${netcat_opt}" -l "${port}" > "${outfile}" & server_pid=$! sleep 0.2 } client_connect() { ip netns exec "${ns1}" timeout 2 nc "${netcat_opt}" -w 1 "${addr2}" "${port}" < "${infile}" echo $? } verify_data() { wait "${server_pid}" server_pid= # sha1sum returns two fields [sha1] [filepath] # convert to bash array and access first elem insum=($(sha1sum ${infile})) outsum=($(sha1sum ${outfile})) if [[ "${insum[0]}" != "${outsum[0]}" ]]; then echo "data mismatch" exit 1 fi } set -e # no arguments: automated test, run all if [[ "$#" -eq "0" ]]; then echo "ipip" $0 ipv4 ipip none 100 echo "ipip6" $0 ipv4 ipip6 none 100 echo "ip6ip6" $0 ipv6 ip6tnl none 100 echo "sit" $0 ipv6 sit none 100 echo "ip4 vxlan" $0 ipv4 vxlan eth 2000 echo "ip6 vxlan" $0 ipv6 ip6vxlan eth 2000 for mac in none mpls eth ; do echo "ip gre $mac" $0 ipv4 gre $mac 100 echo "ip6 gre $mac" $0 ipv6 ip6gre $mac 100 echo "ip gre $mac gso" $0 ipv4 gre $mac 2000 echo "ip6 gre $mac gso" $0 ipv6 ip6gre $mac 2000 echo "ip udp $mac" $0 ipv4 udp $mac 100 echo "ip6 udp $mac" $0 ipv6 ip6udp $mac 100 echo "ip udp $mac gso" $0 ipv4 udp $mac 2000 echo "ip6 udp $mac gso" $0 ipv6 ip6udp $mac 2000 done echo "OK. All tests passed" exit 0 fi if [[ "$#" -ne "4" ]]; then echo "Usage: $0" echo " or: $0 " exit 1 fi case "$1" in "ipv4") readonly addr1="${ns1_v4}" readonly addr2="${ns2_v4}" readonly ipproto=4 readonly netcat_opt=-${ipproto} readonly foumod=fou readonly foutype=ipip readonly fouproto=4 readonly fouproto_mpls=${mplsproto} readonly gretaptype=gretap ;; "ipv6") readonly addr1="${ns1_v6}" readonly addr2="${ns2_v6}" readonly ipproto=6 readonly netcat_opt=-${ipproto} readonly foumod=fou6 readonly foutype=ip6tnl readonly fouproto="41 -6" readonly fouproto_mpls="${mplsproto} -6" readonly gretaptype=ip6gretap ;; *) echo "unknown arg: $1" exit 1 ;; esac readonly tuntype=$2 readonly mac=$3 readonly datalen=$4 echo "encap ${addr1} to ${addr2}, type ${tuntype}, mac ${mac} len ${datalen}" trap cleanup EXIT setup # basic communication works echo "test basic connectivity" server_listen client_connect verify_data # clientside, insert bpf program to encap all TCP to port ${port} # client can no longer connect ip netns exec "${ns1}" tc qdisc add dev veth1 clsact ip netns exec "${ns1}" tc filter add dev veth1 egress \ bpf direct-action object-file ${BPF_FILE} \ section "encap_${tuntype}_${mac}" echo "test bpf encap without decap (expect failure)" server_listen ! client_connect if [[ "$tuntype" =~ "udp" ]]; then # Set up fou tunnel. ttype="${foutype}" targs="encap fou encap-sport auto encap-dport $udpport" # fou may be a module; allow this to fail. modprobe "${foumod}" ||true if [[ "$mac" == "mpls" ]]; then dport=${mplsudpport} dproto=${fouproto_mpls} tmode="mode any ttl 255" else dport=${udpport} dproto=${fouproto} fi ip netns exec "${ns2}" ip fou add port $dport ipproto ${dproto} targs="encap fou encap-sport auto encap-dport $dport" elif [[ "$tuntype" =~ "gre" && "$mac" == "eth" ]]; then ttype=$gretaptype elif [[ "$tuntype" =~ "vxlan" && "$mac" == "eth" ]]; then ttype="vxlan" targs="id 1 dstport 8472 udp6zerocsumrx" elif [[ "$tuntype" == "ipip6" ]]; then ttype="ip6tnl" targs="" else ttype=$tuntype targs="" fi # tunnel address family differs from inner for SIT if [[ "${tuntype}" == "sit" ]]; then link_addr1="${ns1_v4}" link_addr2="${ns2_v4}" elif [[ "${tuntype}" == "ipip6" ]]; then link_addr1="${ns1_v6}" link_addr2="${ns2_v6}" else link_addr1="${addr1}" link_addr2="${addr2}" fi # serverside, insert decap module # server is still running # client can connect again ip netns exec "${ns2}" ip link add name testtun0 type "${ttype}" \ ${tmode} remote "${link_addr1}" local "${link_addr2}" $targs expect_tun_fail=0 if [[ "$tuntype" == "ip6udp" && "$mac" == "mpls" ]]; then # No support for MPLS IPv6 fou tunnel; expect failure. expect_tun_fail=1 elif [[ "$tuntype" =~ "udp" && "$mac" == "eth" ]]; then # No support for TEB fou tunnel; expect failure. expect_tun_fail=1 elif [[ "$tuntype" =~ (gre|vxlan) && "$mac" == "eth" ]]; then # Share ethernet address between tunnel/veth2 so L2 decap works. ethaddr=$(ip netns exec "${ns2}" ip link show veth2 | \ awk '/ether/ { print $2 }') ip netns exec "${ns2}" ip link set testtun0 address $ethaddr elif [[ "$mac" == "mpls" ]]; then modprobe mpls_iptunnel ||true modprobe mpls_gso ||true ip netns exec "${ns2}" sysctl -qw net.mpls.platform_labels=65536 ip netns exec "${ns2}" ip -f mpls route add 1000 dev lo ip netns exec "${ns2}" ip link set lo up ip netns exec "${ns2}" sysctl -qw net.mpls.conf.testtun0.input=1 ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.lo.rp_filter=0 fi # Because packets are decapped by the tunnel they arrive on testtun0 from # the IP stack perspective. Ensure reverse path filtering is disabled # otherwise we drop the TCP SYN as arriving on testtun0 instead of the # expected veth2 (veth2 is where 192.168.1.2 is configured). ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0 # rp needs to be disabled for both all and testtun0 as the rp value is # selected as the max of the "all" and device-specific values. ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.testtun0.rp_filter=0 ip netns exec "${ns2}" ip link set dev testtun0 up if [[ "$expect_tun_fail" == 1 ]]; then # This tunnel mode is not supported, so we expect failure. echo "test bpf encap with tunnel device decap (expect failure)" ! client_connect else echo "test bpf encap with tunnel device decap" client_connect verify_data server_listen fi # serverside, use BPF for decap ip netns exec "${ns2}" ip link del dev testtun0 ip netns exec "${ns2}" tc qdisc add dev veth2 clsact ip netns exec "${ns2}" tc filter add dev veth2 ingress \ bpf direct-action object-file ${BPF_FILE} section decap echo "test bpf encap with bpf decap" client_connect verify_data echo OK