summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-rx6110.c
blob: 76a49838014ba31643210571c98b55d4efd970ad (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Driver for the Epson RTC module RX-6110 SA
 *
 * Copyright(C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
 * Copyright(C) SEIKO EPSON CORPORATION 2013. All rights reserved.
 */

#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>

/* RX-6110 Register definitions */
#define RX6110_REG_SEC		0x10
#define RX6110_REG_MIN		0x11
#define RX6110_REG_HOUR		0x12
#define RX6110_REG_WDAY		0x13
#define RX6110_REG_MDAY		0x14
#define RX6110_REG_MONTH	0x15
#define RX6110_REG_YEAR		0x16
#define RX6110_REG_RES1		0x17
#define RX6110_REG_ALMIN	0x18
#define RX6110_REG_ALHOUR	0x19
#define RX6110_REG_ALWDAY	0x1A
#define RX6110_REG_TCOUNT0	0x1B
#define RX6110_REG_TCOUNT1	0x1C
#define RX6110_REG_EXT		0x1D
#define RX6110_REG_FLAG		0x1E
#define RX6110_REG_CTRL		0x1F
#define RX6110_REG_USER0	0x20
#define RX6110_REG_USER1	0x21
#define RX6110_REG_USER2	0x22
#define RX6110_REG_USER3	0x23
#define RX6110_REG_USER4	0x24
#define RX6110_REG_USER5	0x25
#define RX6110_REG_USER6	0x26
#define RX6110_REG_USER7	0x27
#define RX6110_REG_USER8	0x28
#define RX6110_REG_USER9	0x29
#define RX6110_REG_USERA	0x2A
#define RX6110_REG_USERB	0x2B
#define RX6110_REG_USERC	0x2C
#define RX6110_REG_USERD	0x2D
#define RX6110_REG_USERE	0x2E
#define RX6110_REG_USERF	0x2F
#define RX6110_REG_RES2		0x30
#define RX6110_REG_RES3		0x31
#define RX6110_REG_IRQ		0x32

#define RX6110_BIT_ALARM_EN		BIT(7)

/* Extension Register (1Dh) bit positions */
#define RX6110_BIT_EXT_TSEL0		BIT(0)
#define RX6110_BIT_EXT_TSEL1		BIT(1)
#define RX6110_BIT_EXT_TSEL2		BIT(2)
#define RX6110_BIT_EXT_WADA		BIT(3)
#define RX6110_BIT_EXT_TE		BIT(4)
#define RX6110_BIT_EXT_USEL		BIT(5)
#define RX6110_BIT_EXT_FSEL0		BIT(6)
#define RX6110_BIT_EXT_FSEL1		BIT(7)

/* Flag Register (1Eh) bit positions */
#define RX6110_BIT_FLAG_VLF		BIT(1)
#define RX6110_BIT_FLAG_AF		BIT(3)
#define RX6110_BIT_FLAG_TF		BIT(4)
#define RX6110_BIT_FLAG_UF		BIT(5)

/* Control Register (1Fh) bit positions */
#define RX6110_BIT_CTRL_TBKE		BIT(0)
#define RX6110_BIT_CTRL_TBKON		BIT(1)
#define RX6110_BIT_CTRL_TSTP		BIT(2)
#define RX6110_BIT_CTRL_AIE		BIT(3)
#define RX6110_BIT_CTRL_TIE		BIT(4)
#define RX6110_BIT_CTRL_UIE		BIT(5)
#define RX6110_BIT_CTRL_STOP		BIT(6)
#define RX6110_BIT_CTRL_TEST		BIT(7)

enum {
	RTC_SEC = 0,
	RTC_MIN,
	RTC_HOUR,
	RTC_WDAY,
	RTC_MDAY,
	RTC_MONTH,
	RTC_YEAR,
	RTC_NR_TIME
};

#define RX6110_DRIVER_NAME		"rx6110"

struct rx6110_data {
	struct rtc_device *rtc;
	struct regmap *regmap;
};

/**
 * rx6110_rtc_tm_to_data - convert rtc_time to native time encoding
 *
 * @tm: holds date and time
 * @data: holds the encoding in rx6110 native form
 */
static int rx6110_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
{
	pr_debug("%s: date %ptRr\n", __func__, tm);

	/*
	 * The year in the RTC is a value between 0 and 99.
	 * Assume that this represents the current century
	 * and disregard all other values.
	 */
	if (tm->tm_year < 100 || tm->tm_year >= 200)
		return -EINVAL;

	data[RTC_SEC] = bin2bcd(tm->tm_sec);
	data[RTC_MIN] = bin2bcd(tm->tm_min);
	data[RTC_HOUR] = bin2bcd(tm->tm_hour);
	data[RTC_WDAY] = BIT(bin2bcd(tm->tm_wday));
	data[RTC_MDAY] = bin2bcd(tm->tm_mday);
	data[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
	data[RTC_YEAR] = bin2bcd(tm->tm_year % 100);

	return 0;
}

/**
 * rx6110_data_to_rtc_tm - convert native time encoding to rtc_time
 *
 * @data: holds the encoding in rx6110 native form
 * @tm: holds date and time
 */
static int rx6110_data_to_rtc_tm(u8 *data, struct rtc_time *tm)
{
	tm->tm_sec = bcd2bin(data[RTC_SEC] & 0x7f);
	tm->tm_min = bcd2bin(data[RTC_MIN] & 0x7f);
	/* only 24-hour clock */
	tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
	tm->tm_wday = ffs(data[RTC_WDAY] & 0x7f);
	tm->tm_mday = bcd2bin(data[RTC_MDAY] & 0x3f);
	tm->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1f) - 1;
	tm->tm_year = bcd2bin(data[RTC_YEAR]) + 100;

	pr_debug("%s: date %ptRr\n", __func__, tm);

	/*
	 * The year in the RTC is a value between 0 and 99.
	 * Assume that this represents the current century
	 * and disregard all other values.
	 */
	if (tm->tm_year < 100 || tm->tm_year >= 200)
		return -EINVAL;

	return 0;
}

/**
 * rx6110_set_time - set the current time in the rx6110 registers
 *
 * @dev: the rtc device in use
 * @tm: holds date and time
 *
 * BUG: The HW assumes every year that is a multiple of 4 to be a leap
 * year. Next time this is wrong is 2100, which will not be a leap year
 *
 * Note: If STOP is not set/cleared, the clock will start when the seconds
 *       register is written
 *
 */
static int rx6110_set_time(struct device *dev, struct rtc_time *tm)
{
	struct rx6110_data *rx6110 = dev_get_drvdata(dev);
	u8 data[RTC_NR_TIME];
	int ret;

	ret = rx6110_rtc_tm_to_data(tm, data);
	if (ret < 0)
		return ret;

	/* set STOP bit before changing clock/calendar */
	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
				 RX6110_BIT_CTRL_STOP, RX6110_BIT_CTRL_STOP);
	if (ret)
		return ret;

	ret = regmap_bulk_write(rx6110->regmap, RX6110_REG_SEC, data,
				RTC_NR_TIME);
	if (ret)
		return ret;

	/* The time in the RTC is valid. Be sure to have VLF cleared. */
	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
				 RX6110_BIT_FLAG_VLF, 0);
	if (ret)
		return ret;

	/* clear STOP bit after changing clock/calendar */
	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
				 RX6110_BIT_CTRL_STOP, 0);

	return ret;
}

/**
 * rx6110_get_time - get the current time from the rx6110 registers
 * @dev: the rtc device in use
 * @tm: holds date and time
 */
static int rx6110_get_time(struct device *dev, struct rtc_time *tm)
{
	struct rx6110_data *rx6110 = dev_get_drvdata(dev);
	u8 data[RTC_NR_TIME];
	int flags;
	int ret;

	ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
	if (ret)
		return -EINVAL;

	/* check for VLF Flag (set at power-on) */
	if ((flags & RX6110_BIT_FLAG_VLF)) {
		dev_warn(dev, "Voltage low, data is invalid.\n");
		return -EINVAL;
	}

	/* read registers to date */
	ret = regmap_bulk_read(rx6110->regmap, RX6110_REG_SEC, data,
			       RTC_NR_TIME);
	if (ret)
		return ret;

	ret = rx6110_data_to_rtc_tm(data, tm);
	if (ret)
		return ret;

	dev_dbg(dev, "%s: date %ptRr\n", __func__, tm);

	return 0;
}

static const struct reg_sequence rx6110_default_regs[] = {
	{ RX6110_REG_RES1,   0xB8 },
	{ RX6110_REG_RES2,   0x00 },
	{ RX6110_REG_RES3,   0x10 },
	{ RX6110_REG_IRQ,    0x00 },
	{ RX6110_REG_ALMIN,  0x00 },
	{ RX6110_REG_ALHOUR, 0x00 },
	{ RX6110_REG_ALWDAY, 0x00 },
};

/**
 * rx6110_init - initialize the rx6110 registers
 *
 * @rx6110: pointer to the rx6110 struct in use
 *
 */
static int rx6110_init(struct rx6110_data *rx6110)
{
	struct rtc_device *rtc = rx6110->rtc;
	int flags;
	int ret;

	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_EXT,
				 RX6110_BIT_EXT_TE, 0);
	if (ret)
		return ret;

	ret = regmap_register_patch(rx6110->regmap, rx6110_default_regs,
				    ARRAY_SIZE(rx6110_default_regs));
	if (ret)
		return ret;

	ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
	if (ret)
		return ret;

	/* check for VLF Flag (set at power-on) */
	if ((flags & RX6110_BIT_FLAG_VLF))
		dev_warn(&rtc->dev, "Voltage low, data loss detected.\n");

	/* check for Alarm Flag */
	if (flags & RX6110_BIT_FLAG_AF)
		dev_warn(&rtc->dev, "An alarm may have been missed.\n");

	/* check for Periodic Timer Flag */
	if (flags & RX6110_BIT_FLAG_TF)
		dev_warn(&rtc->dev, "Periodic timer was detected\n");

	/* check for Update Timer Flag */
	if (flags & RX6110_BIT_FLAG_UF)
		dev_warn(&rtc->dev, "Update timer was detected\n");

	/* clear all flags BUT VLF */
	ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
				 RX6110_BIT_FLAG_AF |
				 RX6110_BIT_FLAG_UF |
				 RX6110_BIT_FLAG_TF,
				 0);

	return ret;
}

static const struct rtc_class_ops rx6110_rtc_ops = {
	.read_time = rx6110_get_time,
	.set_time = rx6110_set_time,
};

static int rx6110_probe(struct rx6110_data *rx6110, struct device *dev)
{
	int err;

	rx6110->rtc = devm_rtc_device_register(dev,
					       RX6110_DRIVER_NAME,
					       &rx6110_rtc_ops, THIS_MODULE);

	if (IS_ERR(rx6110->rtc))
		return PTR_ERR(rx6110->rtc);

	err = rx6110_init(rx6110);
	if (err)
		return err;

	rx6110->rtc->max_user_freq = 1;

	return 0;
}

#if IS_ENABLED(CONFIG_SPI_MASTER)
static struct regmap_config regmap_spi_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = RX6110_REG_IRQ,
	.read_flag_mask = 0x80,
};

/**
 * rx6110_spi_probe - initialize rtc driver
 * @spi: pointer to spi device
 */
static int rx6110_spi_probe(struct spi_device *spi)
{
	struct rx6110_data *rx6110;

	if ((spi->bits_per_word && spi->bits_per_word != 8) ||
	    (spi->max_speed_hz > 2000000) ||
	    (spi->mode != (SPI_CS_HIGH | SPI_CPOL | SPI_CPHA))) {
		dev_warn(&spi->dev, "SPI settings: bits_per_word: %d, max_speed_hz: %d, mode: %xh\n",
			 spi->bits_per_word, spi->max_speed_hz, spi->mode);
		dev_warn(&spi->dev, "driving device in an unsupported mode");
	}

	rx6110 = devm_kzalloc(&spi->dev, sizeof(*rx6110), GFP_KERNEL);
	if (!rx6110)
		return -ENOMEM;

	rx6110->regmap = devm_regmap_init_spi(spi, &regmap_spi_config);
	if (IS_ERR(rx6110->regmap)) {
		dev_err(&spi->dev, "regmap init failed for rtc rx6110\n");
		return PTR_ERR(rx6110->regmap);
	}

	spi_set_drvdata(spi, rx6110);

	return rx6110_probe(rx6110, &spi->dev);
}

static const struct spi_device_id rx6110_spi_id[] = {
	{ "rx6110", 0 },
	{ }
};
MODULE_DEVICE_TABLE(spi, rx6110_spi_id);

static const __maybe_unused struct of_device_id rx6110_spi_of_match[] = {
	{ .compatible = "epson,rx6110" },
	{ },
};
MODULE_DEVICE_TABLE(of, rx6110_spi_of_match);

static struct spi_driver rx6110_spi_driver = {
	.driver = {
		.name = RX6110_DRIVER_NAME,
		.of_match_table = of_match_ptr(rx6110_spi_of_match),
	},
	.probe		= rx6110_spi_probe,
	.id_table	= rx6110_spi_id,
};

static int rx6110_spi_register(void)
{
	return spi_register_driver(&rx6110_spi_driver);
}

static void rx6110_spi_unregister(void)
{
	spi_unregister_driver(&rx6110_spi_driver);
}
#else
static int rx6110_spi_register(void)
{
	return 0;
}

static void rx6110_spi_unregister(void)
{
}
#endif /* CONFIG_SPI_MASTER */

#if IS_ENABLED(CONFIG_I2C)
static struct regmap_config regmap_i2c_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = RX6110_REG_IRQ,
	.read_flag_mask = 0x80,
};

static int rx6110_i2c_probe(struct i2c_client *client)
{
	struct i2c_adapter *adapter = client->adapter;
	struct rx6110_data *rx6110;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
				| I2C_FUNC_SMBUS_I2C_BLOCK)) {
		dev_err(&adapter->dev,
			"doesn't support required functionality\n");
		return -EIO;
	}

	rx6110 = devm_kzalloc(&client->dev, sizeof(*rx6110), GFP_KERNEL);
	if (!rx6110)
		return -ENOMEM;

	rx6110->regmap = devm_regmap_init_i2c(client, &regmap_i2c_config);
	if (IS_ERR(rx6110->regmap)) {
		dev_err(&client->dev, "regmap init failed for rtc rx6110\n");
		return PTR_ERR(rx6110->regmap);
	}

	i2c_set_clientdata(client, rx6110);

	return rx6110_probe(rx6110, &client->dev);
}

static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
	{ "SECC6110" },
	{ }
};
MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);

static const struct i2c_device_id rx6110_i2c_id[] = {
	{ "rx6110", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);

static struct i2c_driver rx6110_i2c_driver = {
	.driver = {
		.name = RX6110_DRIVER_NAME,
		.acpi_match_table = rx6110_i2c_acpi_match,
	},
	.probe_new	= rx6110_i2c_probe,
	.id_table	= rx6110_i2c_id,
};

static int rx6110_i2c_register(void)
{
	return i2c_add_driver(&rx6110_i2c_driver);
}

static void rx6110_i2c_unregister(void)
{
	i2c_del_driver(&rx6110_i2c_driver);
}
#else
static int rx6110_i2c_register(void)
{
	return 0;
}

static void rx6110_i2c_unregister(void)
{
}
#endif /* CONFIG_I2C */

static int __init rx6110_module_init(void)
{
	int ret;

	ret = rx6110_spi_register();
	if (ret)
		return ret;

	ret = rx6110_i2c_register();
	if (ret)
		rx6110_spi_unregister();

	return ret;
}
module_init(rx6110_module_init);

static void __exit rx6110_module_exit(void)
{
	rx6110_spi_unregister();
	rx6110_i2c_unregister();
}
module_exit(rx6110_module_exit);

MODULE_AUTHOR("Val Krutov <val.krutov@erd.epson.com>");
MODULE_DESCRIPTION("RX-6110 SA RTC driver");
MODULE_LICENSE("GPL");