firmware: Fix placement of .align directives

Move the .align directives after switching the section.  We want to align
the start of the current section, not the end of the previous section.
This also obsoletes the misguided workaround of disabling relaxation.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

5 files changed, 34 insertions, 44 deletions

diff --git a/firmware/fw_base.S b/firmware/fw_base.S
index 0797cc0..119622c 100644
--- a/firmware/fw_base.S
+++ b/firmware/fw_base.S
@@ -41,8 +41,8 @@
 999:
 .endm
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _start
 	.globl _start_warm
 _start:
@@ -405,8 +405,8 @@ _link_start:
 _link_end:
 	RISCV_PTR	_fw_reloc_end
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _hartid_to_scratch
 _hartid_to_scratch:
 	add	sp, sp, -(3 * __SIZEOF_POINTER__)
@@ -440,15 +440,15 @@ _hartid_to_scratch:
 	add	sp, sp, (3 * __SIZEOF_POINTER__)
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _start_hang
 _start_hang:
 	wfi
 	j	_start_hang
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _trap_handler
 _trap_handler:
 	/* Swap TP and MSCRATCH */
@@ -603,8 +603,8 @@ _skip_mstatush_restore:
 
 	mret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _reset_regs
 _reset_regs:
 
diff --git a/firmware/fw_dynamic.S b/firmware/fw_dynamic.S
index 192698a..d658011 100644
--- a/firmware/fw_dynamic.S
+++ b/firmware/fw_dynamic.S
@@ -11,14 +11,14 @@
 
 #include "fw_base.S"
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 _bad_dynamic_info:
 	wfi
 	j	_bad_dynamic_info
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_boot_hart
 	/*
 	 * This function is called very early even before
@@ -43,8 +43,8 @@ fw_boot_hart:
 2:	li	a0, -1
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_save_info
 	/*
 	 * We can only use a0, a1, a2, a3, and a4 registers here.
@@ -86,8 +86,8 @@ fw_save_info:
 2:
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_prev_arg1
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -99,8 +99,8 @@ fw_prev_arg1:
 	add	a0, zero, zero
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_arg1
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -113,8 +113,8 @@ fw_next_arg1:
 	REG_L	a0, (a0)
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_addr
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -125,8 +125,8 @@ fw_next_addr:
 	REG_L	a0, (a0)
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_mode
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -137,8 +137,8 @@ fw_next_mode:
 	REG_L	a0, (a0)
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_options
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -150,8 +150,8 @@ fw_options:
 	REG_L	a0, (a0)
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 _dynamic_next_arg1:
 	RISCV_PTR 0x0
 _dynamic_next_addr:
diff --git a/firmware/fw_jump.S b/firmware/fw_jump.S
index e0a3b53..afbcec0 100644
--- a/firmware/fw_jump.S
+++ b/firmware/fw_jump.S
@@ -9,8 +9,8 @@
 
 #include "fw_base.S"
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_boot_hart
 	/*
 	 * This function is called very early even before
@@ -22,8 +22,8 @@ fw_boot_hart:
 	li	a0, -1
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_save_info
 	/*
 	 * We can only use a0, a1, a2, a3, and a4 registers here.
@@ -34,8 +34,8 @@ fw_boot_hart:
 fw_save_info:
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_prev_arg1
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -47,8 +47,8 @@ fw_prev_arg1:
 	add	a0, zero, zero
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_arg1
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -64,8 +64,8 @@ fw_next_arg1:
 #endif
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_addr
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -76,8 +76,8 @@ fw_next_addr:
 	REG_L	a0, (a0)
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_mode
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -87,8 +87,8 @@ fw_next_mode:
 	li	a0, PRV_S
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_options
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -103,7 +103,7 @@ fw_options:
 #error "Must define FW_JUMP_ADDR"
 #endif
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 _jump_addr:
 	RISCV_PTR FW_JUMP_ADDR
diff --git a/firmware/fw_payload.S b/firmware/fw_payload.S
index 84d9ad4..9805d8c 100644
--- a/firmware/fw_payload.S
+++ b/firmware/fw_payload.S
@@ -9,8 +9,8 @@
 
 #include "fw_base.S"
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_boot_hart
 	/*
 	 * This function is called very early even before
@@ -22,8 +22,8 @@ fw_boot_hart:
 	li	a0, -1
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_save_info
 	/*
 	 * We can only use a0, a1, a2, a3, and a4 registers here.
@@ -34,8 +34,8 @@ fw_boot_hart:
 fw_save_info:
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_prev_arg1
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -51,8 +51,8 @@ fw_prev_arg1:
 #endif
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_arg1
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -68,8 +68,8 @@ fw_next_arg1:
 #endif
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_addr
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -79,8 +79,8 @@ fw_next_addr:
 	la	a0, payload_bin
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_next_mode
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -90,8 +90,8 @@ fw_next_mode:
 	li	a0, PRV_S
 	ret
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.global fw_options
 	/*
 	 * We can only use a0, a1, and a2 registers here.
@@ -102,24 +102,16 @@ fw_options:
 	add	a0, zero, zero
 	ret
 
-	/*
-	 * We disable relaxation because use of ".align"
-	 * and ".balign" can potentially generate compile
-	 * errors with latest RISC-V GCC Binutils.
-	 */
-	.option push
-	.option norelax
-
 #ifdef FW_PAYLOAD_FDT_PATH
-	.align 4
 	.section .text, "ax", %progbits
+	.align 4
 	.globl fdt_bin
 fdt_bin:
 	.incbin	FW_PAYLOAD_FDT_PATH
 #endif
 
-	.align 4
 	.section .payload, "ax", %progbits
+	.align 4
 	.globl payload_bin
 payload_bin:
 #ifndef FW_PAYLOAD_PATH
@@ -128,5 +120,3 @@ payload_bin:
 #else
 	.incbin	FW_PAYLOAD_PATH
 #endif
-
-	.option pop
diff --git a/firmware/payloads/test_head.S b/firmware/payloads/test_head.S
index ef1405a..840013e 100644
--- a/firmware/payloads/test_head.S
+++ b/firmware/payloads/test_head.S
@@ -23,8 +23,8 @@
 #define REG_L		__REG_SEL(ld, lw)
 #define REG_S		__REG_SEL(sd, sw)
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _start
 _start:
 	/* Pick one hart to run the main boot sequence */
@@ -71,15 +71,15 @@ _start_warm:
 	/* We don't expect to reach here hence just hang */
 	j	_start_hang
 
-	.align 3
 	.section .entry, "ax", %progbits
+	.align 3
 	.globl _start_hang
 _start_hang:
 	wfi
 	j	_start_hang
 
-	.align	3
 	.section .entry, "ax", %progbits
+	.align	3
 _hart_lottery:
 	RISCV_PTR	0
 _boot_a0: