| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
One of the watchdogs in the D1 SoC provides a "soft reset" function,
which allows software to immediately reset the entire SoC. Add a driver
so it can implement the SBI system reset function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
In preparation for adding a new fdt_reset driver, ensure the existing
lists are sorted alphabetically.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
sbi_platform_get_features_str() uses sbi_snprintf() to construct the
features_str. However, it passes the wrong length value (i.e., the nfstr),
which should be (nfstr-offset) as the starting point of str (i.e.,
features_str + offset) changes.
This commit also checks the return value of snprintf, and handles the
corner case that the string buffer is full.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
As other exported fifo functions, we should check whether the fifo is
valid in sbi_fifo_is_empty and sbi_fifo_is_full. To this end, this patch
changes the retval from bool to int, and the two functions will return
SBI_EINVAL in the case the fifo is invalid.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
Avoid getting messages from multiple harts (using dprintf and printf)
concurrently with a spinlock serializaing calls to sbi_dprintf(),
sbi_printf() and sbi_puts()
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
Correcting the name of faults delegation CSR
%s/mfdeleg/medeleg
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
It can be useful to make SBI v0.2 or newer ecalls from this payload
for testing purposes. To support this, convert the macros to use the
extension/function parameter convention.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
commit 764a17d852a8 ("lib: sbi: Implement firmware counters") added
switch cases for CAUSE_LOAD_ACCESS and CAUSE_STORE_ACCESS. This caused
them to stop being redirected to U or S mode, as that is handled in the
default switch case. As a result, an error in userspace could cause the
system to hang. Fix this by allowing the acces fault case to fall
through to the default case.
Fixes: 764a17d852a8 ("lib: sbi: Implement firmware counters")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
In sbi_ecall_rfence_handler, it will compare the funcid with
REMOTE_HFENCE_GVMA and REMOTE_HFENCE_VVMA_ASID. Later it check
whether the misa includes H-extension. This checking is incomplete
which misses REMOTE_HFENCE_GVMA_VMID and REMOTE_HFENCE_VVMA.
Fix the issue by updating the checking range.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We simplify MTIMER synchronization as follows:
1) Detect MTIMER devices with unique (or non-shared) MTIME
register at boot-time
2) Select first MTIMER device with no associated HART as our
reference MTIMER device
3) Only synchronize MTIMER devices with unique (or non-shared)
MTIME register using reference MTIMER device
4) Directly update the MTIME register at time of synchronization
because MTIME is a read/write register.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We can have ACLINT MTIMER devices which only support 32-bit MMIO
accesses on RV64 system so this patch adds a boolean DT property
"mtimer,no-64bit-mmio" to detect this from MTIMER DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
No need to compare characters when the count turns to 0.
Fix the issue in sbi_strncmp.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
The generic GPIO reset driver has two entries in the match table:
"gpio-poweroff", "gpio-reset". Only the first entry is considered by
fdt_reset_init().
Define "gpio-poweroff" and "gpio-reset" as compatibility strings of two
separate reset drivers. They still can share code.
Fixes: e3d6919d10d7 ("lib: utils/reset: Add generic GPIO reset driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The value of variable current_driver is unused. Remove the variable.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
Instruction TLB can fail to respect a non-global SFENCE thus we need to
flush the TLB using SFENCE.VMA x0, x0
See full description of CIP-1200 in Errata_FU740-C000_20210205 from
https://www.sifive.com/boards/hifive-unmatched
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
The previous code uses _start as the load address, this default .entry is
the first segment, using _fw_start does not need to make this assumption.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
When generating code with -mno-relax, GCC puts .option norelax in
the generated assembly, and so doesn’t bother passing on -mno-relax
to the assembler. This has the unfortunate effect that, when using
GCC to assemble hand-written assembly, -mno-relax does nothing,
and we have to pass -Wa,-mno-relax to manually forward it to the
assembler.
This is an old GCC bug that was fixed [1] recently. For the time
being, let's pass "-Wa,-mno-relax" to ASFLAGS for the GCC + LLD
combination to work, e.g.:
$ make CC=riscv64-unknown-elf-gcc LLVM=1 PLATFORM=generic
[1] https://github.com/gcc-mirror/gcc/commit/3b0a7d624e64eeb81e4d5e8c62c46d86ef521857
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
Recent FW_PIC=y changes actually require toolchains with PIE support
and it is on by default. Existing doc uses a GNU bare-metal toolchain
as examples but it does not support PIE.
Replace references of bare-metal toolchain prefix with Linux toolchain
prefix everywhere in documentation.
Also indicate that "riscv64-unknown-freebsd-" as an alternative to
"riscv64-linux-" GNU toolchain.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
FW_PIC=y is on by default, but the doc is missing when this was
introduced. Add some description for it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
This updates documentation to describe parameters passed to firmware
from previous booting stage, and corresponding address alignment
requirement.
This also fixes a typo in fw_dynamic.md (it's => its).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
If the device tree is at an address that is not __SIZEOF_POINTER__
aligned, the fdt relocation code tries to align both source and
destination address to __SIZEOF_POINTER__ before the memory copy.
But such alignment can lead to unexpected results if either source
or destination address is not aligned.
In fact libfdt requires that the device tree must be at an 8-byte
aligned address. Hence remove the unhelpful alignment codes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
Clang provides a __builtin_offsetof which can be detected using
__has_builtin().
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
The fields are of type unsigned long and are not pointers. While this
happens to be the same for RV32/RV64, it is not correct when compiling
for a CHERI-RISC-V system where pointers are twice the size of long.
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
We add generic GPIO reset driver inspired from gpio-restart
and gpio-poweroff drivers of Linux kernel.
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We add a minimal SiFive GPIO driver so that we can do GPIO based
system power-off and reset.
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We add a simple FDT based GPIO framework which is built on top
of generic GPIO library. The phandle of FDT GPIO chip DT node
is treated as unique GPIO chip ID required by the generic GPIO
library. The FDT based GPIO chip drivers will be probed on-demand
from fdt_gpio_pin_get() called by the GPIO client drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We add generic GPIO configuration library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or GPIO drivers can register GPIO chip instances which
can be discovered and used by different GPIO clients. Each GPIO
chip instance has a unique ID which can be used by GPIO clients
to lookup GPIO chip instance.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
The libfdt project does not have a generic API to parse phandle
with args from a DT node so we add fdt_parse_phandle_with_args()
for this purpose. This new API will be useful to FDT based drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
We only need libgcc for 64-bit division on RV32. Whilst GCC toolchains
bundle libgcc, Clang toolchains tend not to ship libclang_rt.builtins
given every compiler is a cross-compiler for every target and so you
would need a silly number of builds of it, with only the native library
available; only vendor-provided Clang toolchains specifically for bare
metal cross-compiling are likely to provide it.
Thus, import part of FreeBSD's implementation of the division support
functions needed and stop linking against libgcc.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
|
|
This is intended to mirror the Linux kernel. Building with CC=clang will
use Clang as the compiler but default to using the existing binutils.
Building with LLVM=1 will default to using Clang and LLVM binutils.
Whilst GCC will accept the -N linker option and forward it on to the
linker, Clang will not, and so in order to support both compilers we
must use -Wl, to forward it to the linker as is required for most other
linker options.
Note that there is currently a bug when using Clang as the compiler and
riscv64-linux-gnu-ld as the linker for FW_PIC=y. At first glance this
appears to be a bug in GNU binutils, but this could also be Clang or
OpenSBI at fault in some subtle way. Thus, for now, advise that this
combination be avoided.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
|
|
Bare-metal GNU ld does not support PIE, so if using it this will result
in a failure to build. Instead, default to FW_PIC=n if not supported.
Note that an explicit FW_PIC=y is not overridden, to ensure the build
fails rather than silently producing a position-dependent binary.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
When using Clang with a bare-metal triple, -pie does not get passed to
the linker as it's not normally a thing that makes sense, unlike GCC
which will unconditionally forward it on and potentially result in a
linker error. However, LLD does support it, and manually forwarding it
on works as desired, so do so to fully support FW_PIC with Clang and
LLD.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
The -N linker option is supposed to make .text writable, but GNU ld and
LLD differ in interpreting what that means. GNU ld will happily let you
have relocations in it, but LLD will see that the input section is
read-only (even though the output section is writable) and give an
error. It's unclear if either of them intend to have that behaviour in
this edge case, but regardless there's no reason not to just put the
data in a writable .data section.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
These are mutually exclusive. GNU as and LLVM both let later binding
directives override earlier ones so this works as intended, but LLVM 12
turned this into a warning as there's no good reason to do such a thing
and could be a potential bug. Thus, remove the redundant and incorrect
.globl directive for fw_platform_init.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
The sbi_pmu_exit() crashes on systems not having MCOUNTINHIBIT csr
so to fix this we check SBI_HART_HAS_MCOUNTINHIBIT feature in
sbi_pmu_exit() and do nothing if it is not available.
Fixes: 13d40f21d588 ("lib: sbi: Add PMU support")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Avoid using a magic number, instead use a macro for the version of
struct fw_dynamic_info.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
The sanity checks on the magic and version was already done in
fw_boot_hart(), which happens before fw_save_info() is called.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
At present in the rendered platform guide, all instances of <xyz>
are missing. Use < and > to replace <> to make them visible.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
It's riscv-pk, not riskv-pk.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
|
|
Before entering _scratch_init(), register t3 already holds a copy
of the firmware end address, hence there is no need to calculate
it again. This reduces 3 instructions in each _scratch_init() loop.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
|
|
Add PMU support for generic platform. Generic platform solely relies on
the device tree to parse all pmu related information. If any event is
not described in device tree, generic platform will not support it.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
Follow the standard conventon for static function names:
All global functions should be start with sbi_<module name>_
All static functions should be start with <module name>_
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
RISC-V SBI v0.3 specification defines a set of firmware events that can
provide additional information about the current firmware context. All
of the firmware event monitoring are enabled now. The firmware
events must be defined as raw perf event with MSB set as specified in the
specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
RISC-V SBI specfication 0.3 defines a PMU extension that allows supervisor
mode to start/stop/configure pmu related events. This patch implements
all of the functionality defined in the specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
The PMU DT node bindings are defined in docs/pmu_support.md
Add few fdt helper functions to parse the DT node and update the
event-counter mapping tables.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
|
RISC-V SBI v0.3 specification defined a PMU extension to configure/start/stop
the hardware/firmware pmu events.
Implement PMU support in OpenSBI library. The implementation is agnostic of
event to counter mapping & mhpmevent value configuration. That means, it
expects platform hooks will be used to set up the mapping and provide
the mhpmevent value at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
