| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The allwinner,sun20i-d1-clint compatible string is not documented in any
official binding, so it should not be used by drivers.
The MSWI in the D1 CLINT is compatible with the ACLINT specification, so
it can take advantage of generic driver support. However, that is only
possible if the MSWI and MTIMER are split into separate DT nodes. This
means the final binding for this device is likely to be incompatible
with what is implemented here.
Remove this compatible string from the driver to prevent it from
appearing in a stable version and causing future issues.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The second invocation of plic_context_init() incorrectly calls the
function with m_cntx_id instead of s_cntx_id. This breaks systems which
only have 1 external interrupt per hart.
Fixes: 8c362e7 ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
|
|
The CLINT in the Allwinner D1 SoC apparently does not support 64-bit
MMIO access. A property was added to support this quirk (and that
property was copied to the ACLINT MTIMER code). However, since this
difference in behavior makes the D1 CLINT incompatible with the SiFive
CLINT's programming interface, a better solution is to use a separate
compatible string.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC programming as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
We should not change trap->tval to mepc because mtval already points to
the faulting portion of the emulated instruction fetch, which is also
what stval is expected to be.
In addition, htinst is only allowed to be zero for instruction access
faults or page faults, and is only allowed to be zero or a
psuedoinstruction for instruction guest-page faults. Fix trap->tinst for
these cases.
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
If there is an exception while emulating a misaligned load/store, fixup
uptrap.tinst before redirecting. Otherwise, HS-mode software may receive
an htinst describing the lbu/sb instruction that faulted during
emulation[1].
[1]: https://github.com/riscv-software-src/opensbi/issues/258
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The delegation bit is lost along with the rest of the PLIC state when
the CPU power domain in the Allwinner D1 is powered down, so the PLIC
needs to be re-delegated to S-mode during the hart resume path.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
These functions save/restore the state of the PLIC associated with the
current hart. The context save/restore functions only manipulate a
single context, since most likely the M-mode context is unused and does
not need to be saved.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
These can be used by platform code to save the PLIC priority state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
As a space optimization, store the saved priority values as 8-bit
integers, since that is large enough to hold any priority value on the
relevant platforms.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
These can be used by platform code to save the PLIC context state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
This simplifies both the callers and the callees by removing duplicated
code and consolidating the error handling. It also fixes two bugs in the
process:
1) ie_words was one too large when plic->num_src was a multiple of 32.
2) plic_set_ie takes a 32-bit mask, not a Boolean value, so the FPGA
platforms previously only enabled one out of every 32 interrupts.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
None of the functions modify the passed-in plic_data, so mark it const.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
The suspend code needs to know the resume address for two reasons:
1) Programming some hardware register or management firmware. Here we
assume the hardware/firmware maintains its state between suspends,
so it only needs to be programmed once at startup.
2) When a non-retentive suspend request ends up being retentive, due
to lack of hardware support, pending interrupt, or for some other
reason. However, the behavior here is not platform-dependent, and
this can be handled in the generic hart suspend function.
Since neither situation requires the platform-level suspend function to
know the resume address, stop passing it to that function. Instead,
handle the non-retentive to retentive situation generically.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
Non-retentive suspend states may require platform-specific actions
during resume. For example, firmware may need to save and restore the
values of custom CSRs. Add a hook to support this.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
HS-mode software can choose what exceptions to delegate to VS-mode using
the hedeleg CSR. Synthetic VS/VU-mode exceptions should also honor
hedeleg. They should be redirected to VS-mode if and only if delegated
by HS-mode.
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
While OpenC906 appears to properly decode `fence.tso` as a fence
instruction[1], the version of the C906 taped out in the Allwinner D1
does not, and raises illegal instruction.
Handle this errata by emulating `fence.tso` as `fence rw, rw`.
[1]: https://github.com/T-head-Semi/openc906/blob/30827e7f/C906_RTL_FACTORY/gen_rtl/idu/rtl/aq_idu_id_decd.v#L2097
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
This table does not need to be modified at runtime.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The device's timer_value callback is already the right prototype to use
for the get_time_val function pointer.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
Match data stores hardware attributes which do not change at runtime, so
it does not need to be mutable. Make it const.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
If the csr's operation comes from M mode, it should not be forwarded
to low-privilege processing, this patch fixes this problem.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The function returns the highest hart-id of the harts actually used in
the system (enabled). Change the name to reflect this fact.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
Ignore CPU nodes in FDT that are not enabled.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
If an FDT node contains a "status" property and this property is not
"ok" or "okay", this node should be ignored. Introduce a function that
checks this.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
Fix typo in irqchip_imsic_update_hartid_table() when checking for CPU
node.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Instead of having FDT gpio driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Instead of having FDT i2c adapter driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Instead of having FDT ipi driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Instead of having FDT irqchip driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Instead of having FDT timer driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Instead of having FDT serial driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Instead of having FDT reset driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
We add platform specific extensions_init() callback which allows
platforms to populate HART extensions for each HART. For example,
the generic platform can populate HART extensions from HART ISA
string described in DeviceTree.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
We add sbi_hart_update_extension() function which allow platforms
to enable/disable hart extensions.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Currently, the hart_detect_features() is called everytime a hart
is stopped and started again which is unnecessary work.
We update hart_detect_features() to detect hart features only
once for each hart.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Since past few years, we have been using "hart features" in OpenSBI
to represent all optionalities and multi-letter extensions defined
by the RISC-V specifications.
The RISC-V profiles specification has taken a different approach and
started assigning extension names for all optionalities which did not
have any extension name previously.
(Refer, https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc)
Inspired from the RISC-V profiles specification, we convert OpenSBI
hart features into hart extensions. Going forward, we align the
extension naming with RISC-V profiles specification. Currently, only
"time CSR" and "AIA CSR" have not been assigned extension name but
for everything else we have a name.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
The AIA feature detection uses unnecessary goto which is not need
and AIA case in sbi_hart_feature_id2string() does not break. This
patch fixes both issues in AIA feature detection.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
If a hart implements privileged spec v1.12 (or higher) then we can
safely assume that menvcfg CSR is present and we don't need MENVCFG
as a hart feature.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
If a hart implements privileged spec v1.11 (or higher) then we can
safely assume that mcountinhibit CSR is present and we don't need
MCOUNTINHIBT as a hart feature.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
If a hart implements privileged spec v1.10 (or higher) then we can
safely assume that [m|s]counteren CSR are present and we don't need
MCOUNTEREN and SCOUNTEREN as hart features.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
The ISA string printed at boot time is not the complete ISA string
representing all single letter and multi-letter extensions rather
it is base ISA string derived from misa CSR so let us update the
boot print accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Both 's' and 'u' are not treated as ISA extensions since these are
privilege modes so let's remove it from misa_string() output.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
It is possible to guess privileged spec versions based on the CSRs
that where introduced in different privileged spec versions. In
future, if we are not able guess privileged spec version then we
can have platform provide it.
We add privileged spec version as per-hart feature and try to guess
it based on presence of mcounteren, mcountinhibit, and menvcfg CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
MHPMEVENT3H-31H are defined in sscofpmf extension. Thus, they should be
accessed only if sscofpmf is present.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The mhpmevent3h to mhpmevent31h CSRs are available on RV32 only when
Sscofpmf extension is available so mstatus_init() should set this
CSRs only when Sscofpmf extension is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Recently, Sstc extension was ratified. It defines stimecmp which allows
the supervisor mode to directly update the timecmp value without the
need of the SBI call. The hardware also can inject the S-mode timer
interrupt direclty to the supervisor without going through the M-mode.
To maintain backward compatibility with the older software, SBI call
now uses stimecmp directly if the hardware supports.
Implement the Sstc extension.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The OpenSBI hart init function hart_detect_features() try to read
important CSRs but reasign the last read value to the variable that
initially contains write probe value. So for series of CSRs (like
PMPADDRx) the second CSR probe value will became the initial value of
first probing CSR. To avoid of this issue the CSR read value should be
saved in different variable. In this configuration the count of PMP
will detect rightly if any PMPADDR is hardwired to zero.
Signed-off-by: Dmitry Dunaev <dunaich@mail.ru>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
reg-offset property is used for offset to apply to the mapbase
from the start of the registers in 8250 UART. In Linux kernel,
it has been handled in 8250 UART driver.
dt-bindings:
<linux>/Documentation/devicetree/bindings/serial/8250.yaml
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
When mstateen registers are implemented, the AIA related
configurations need to be done in mstateen for the IMSIC
initialization to succeed.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
Extend HART feature detection to discover Smstateen CSRs at boot-time
and configure mstateen envcfg bit depending on availability of
menvcfg CSR.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
|
|
The menvcfg.PBMTE bit is read-only zero when Svpbmt extension is not
available so we try to enable menvcfg.PBMTE bit irrespective whether
Svpbmt is available or not.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
|
