1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
|
SiFive FU540 SoC Platform
==========================
The FU540-C000 is the world’s first 4+1 64-bit RISC-V SoC from SiFive.
The HiFive Unleashed development platform is based on FU540-C000 and capable
of running Linux.
With QEMU v4.2 or above release, the 'sifive_u' machine can be used to test
OpenSBI image built for the real hardware as well.
To build platform specific library and firmwares, provide the
*PLATFORM=sifive/fu540* parameter to the top level `make` command.
Platform Options
----------------
As hart0 in the FU540 doesn't have an MMU, only harts 1-4 boot by default.
A hart mask i.e. *FU540_ENABLED_HART_MASK* compile time option is provided
to select any other hart for booting. Please keep in mind that this is not
a generic option and it can only be specified for FU540 platform in the
following way:
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=Image FU540_ENABLED_HART_MASK=0x02
```
This will let the board boot only hart1 instead of default 1-4.
Building SiFive Fu540 Platform
-----------------------------
In order to boot SMP Linux in U-Boot, Linux v5.1 (or higher) and latest
U-Boot v2019.04 (or higher) should be used.
**Linux Kernel Payload**
The HiFive Unleashed device tree(DT) is merged in Linux v5.2 release. This
DT (device tree) is not backward compatible with the DT passed from FSBL.
To use Linux v5.2 (or higher, the pre-built DTB (DT binary) from Linux v5.2
(or higher) should be used to build SiFive FU540 OpenSBI binaries by using
the compile time option *FW_PAYLOAD_FDT_PATH*.
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image
or
(For Linux v5.2 or higher)
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_PAYLOAD_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
```
**U-Boot Payload**
The command-line example here assumes that U-Boot was compiled using the
sifive_fu540_defconfig configuration and with U-Boot v2019.04 (or higher)
having SMP support. From, Linux v5.2 (or higher) device tree is hosted in
Linux kernel and compiled as a part of Linux kernel build process.
The detailed U-Boot booting guide is avaialble at [U-Boot](https://gitlab.denx.de/u-boot/u-boot/blob/master/doc/board/sifive/fu540.rst)
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin
or
(For U-Boot which follows Linux v5.2 (or higher) DT bindings)
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin FW_PAYLOAD_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
```
Generate the uImage from Linux Image.
```
mkimage -A riscv -O linux -T kernel -C none -a 0x80200000 -e 0x80200000 -n Linux -d \
<linux_build_directory>/arch/riscv/boot/Image \
<linux_build_directory>/arch/riscv/boot/uImage
```
**U-Boot & Linux Kernel as a single payload**
A single monolithic image containing both U-Boot & Linux can also be used if
network boot setup is not available.
1. Generate the uImage from Linux Image.
```
mkimage -A riscv -O linux -T kernel -C none -a 0x80200000 -e 0x80200000 -n Linux -d \
<linux_build_directory>/arch/riscv/boot/Image \
<linux_build_directory>/arch/riscv/boot/uImage
```
2. Create a temporary image with u-boot.bin as the first payload. The
command-line example here assumes that U-Boot was compiled using
sifive_fu540_defconfig configuration.
```
dd if=~/workspace/u-boot-riscv/u-boot.bin of=/tmp/temp.bin bs=1M
```
3. Append the Linux Kernel image generated in step 1.
```
dd if=<linux_build_directory>/arch/riscv/boot/uImage of=/tmp/temp.bin bs=1M seek=4
```
4. Compile OpenSBI with temp.bin (generated in step 3) as payload.
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=/tmp/temp.bin
or
(For U-Boot which follows Linux v5.2 (or higher) DT bindings)
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=/tmp/temp.bin FW_PAYLOAD_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
```
Flashing the OpenSBI firmware binary to storage media:
-----------------------------------------------------
The first stage boot loader([FSBL](https://github.com/sifive/freedom-u540-c000-bootloader))
expects the storage media to have a GPT partition table. It tries to look for
a partition with following GUID to load the next stage boot loader (OpenSBI
in this case).
```
2E54B353-1271-4842-806F-E436D6AF6985
```
That's why the generated firmware binary in above steps should be copied to
the partition of the sdcard with above GUID.
```
dd if=build/platform/sifive/fu540/firmware/fw_payload.bin of=/dev/disk2s1 bs=1024
```
In my case, it is the first partition is **disk2s1** that has been formatted
with the above specified GUID.
In case of a brand new sdcard, it should be formatted with below partition
tables as described here.
```
sgdisk --clear \
--new=1:2048:67583 --change-name=1:bootloader --typecode=1:2E54B353-1271-4842-806F-E436D6AF6985 \
--new=2:264192: --change-name=2:root --typecode=2:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \
${DISK}
```
Booting SiFive Fu540 Platform
-----------------------------
**Linux Kernel Payload**
As Linux kernel image is embedded in the OpenSBI firmware binary, HiFive
Unleashed will directly boot into Linux directly after powered on.
**U-Boot Payload**
As U-Boot image is used as payload, HiFive Unleashed will boot into a U-Boot
prompt. U-Boot tftp boot method can be used to load kernel image in U-Boot
prompt. Here are the steps do a tftpboot.
1. Set the mac address of the board.
```
setenv ethaddr <mac address of the board>
```
(Note: This step is optional)
2. Set the ip address of the board.
```
setenv ipaddr <ipaddr of the board>
```
3. Set the tftpboot server IP.
```
setenv serverip <ipaddr of the tftp server>
```
4. Set the network gateway address.
```
setenv gatewayip <ipaddress of the network gateway>
```
5. Load the Linux kernel image from the tftp server.
```
tftpboot ${kernel_addr_r} <uImage path in tftpboot directory>
```
6. Load the ramdisk image from the tftp server. This is only required if
ramdisk is loaded from tftp server. This step is optional, if rootfs is
already part of the kernel or loaded from an external storage by kernel.
```
tftpboot ${ramdisk_addr_r} <ramdisk path in tftpboot directory>
```
7. Load the pre-compiled device tree via tftpboot.
```
tftpboot ${fdt_addr_r} <linux source>/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dtb
```
8. Set the boot command-line arguments.
```
setenv bootargs "root=<root partition> rw console=ttySIF0 earlycon=sbi"
```
(Note: root partition should point to
** /dev/ram ** - If a ramdisk is used
** root=/dev/mmcblk0pX ** - If a rootfs is already on some other partition
of sdcard)
9. Now boot into Linux.
```
bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
or
(If ramdisk is not loaded from network)
bootm ${kernel_addr_r} - ${fdt_addr_r}
```
**U-Boot & Linux Kernel as a single payload**
At U-Boot prompt execute the following boot command to boot Linux.
```
bootm ${kernel_addr_r} - ${fdt_addr_r}
```
QEMU Specific Instructions
--------------------------
If you want to test OpenSBI with QEMU 'sifive_u' machine, please follow the
same instructions above, with the exception of not passing FW_PAYLOAD_FDT_PATH.
This is because QEMU generates a device tree blob on the fly based on the
command line parameters and it's compatible with the one used in the upstream
Linux kernel.
|