starfive: apply the pinctl to dts

3 files changed, 597 insertions, 12 deletions

diff --git a/arch/riscv/dts/jh7100-beaglev-starlight.dts b/arch/riscv/dts/jh7100-beaglev-starlight.dts
index b7e9ac531d..73e2f89acf 100644
--- a/arch/riscv/dts/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/dts/jh7100-beaglev-starlight.dts
@@ -5,6 +5,7 @@
 #include "jh7100.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive.h>
 #include <dt-bindings/starfive_fb.h>
 
 / {
@@ -85,13 +86,306 @@
 	};
 };
 
+&gmac {
+	snps,reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins>;
+};
+
+&gpio {
+	/* don't reset gpio mux for serial console on uart3 */
+	starfive,keep-gpiomux = <13 14>;
+
+	gmac_pins: gmac-0 {
+		gtxclk-pins {
+			pins = <PAD_FUNC_SHARE(115)>;
+			bias-pull-up;
+			drive-strength = <35>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		miitxclk-pins {
+			pins = <PAD_FUNC_SHARE(116)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pins = <PAD_FUNC_SHARE(117)>,
+			       <PAD_FUNC_SHARE(119)>,
+			       <PAD_FUNC_SHARE(120)>,
+			       <PAD_FUNC_SHARE(121)>,
+			       <PAD_FUNC_SHARE(122)>,
+			       <PAD_FUNC_SHARE(123)>,
+			       <PAD_FUNC_SHARE(124)>,
+			       <PAD_FUNC_SHARE(125)>,
+			       <PAD_FUNC_SHARE(126)>;
+			bias-pull-up;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		rxclk-pins {
+			pins = <PAD_FUNC_SHARE(127)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <6>;
+		};
+		rxer-pins {
+			pins = <PAD_FUNC_SHARE(129)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		rx-pins {
+			pins = <PAD_FUNC_SHARE(128)>,
+			       <PAD_FUNC_SHARE(130)>,
+			       <PAD_FUNC_SHARE(131)>,
+			       <PAD_FUNC_SHARE(132)>,
+			       <PAD_FUNC_SHARE(133)>,
+			       <PAD_FUNC_SHARE(134)>,
+			       <PAD_FUNC_SHARE(135)>,
+			       <PAD_FUNC_SHARE(136)>,
+			       <PAD_FUNC_SHARE(137)>,
+			       <PAD_FUNC_SHARE(138)>,
+			       <PAD_FUNC_SHARE(139)>,
+			       <PAD_FUNC_SHARE(140)>,
+			       <PAD_FUNC_SHARE(141)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(62, GPO_LOW,
+				  GPO_I2C0_PAD_SCK_OEN,
+				  GPI_I2C0_PAD_SCK_IN)>,
+				 <GPIOMUX(61, GPO_LOW,
+				  GPO_I2C0_PAD_SDA_OEN,
+				  GPI_I2C0_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(47, GPO_LOW,
+				  GPO_I2C1_PAD_SCK_OEN,
+				  GPI_I2C1_PAD_SCK_IN)>,
+				 <GPIOMUX(48, GPO_LOW,
+				  GPO_I2C1_PAD_SDA_OEN,
+				  GPI_I2C1_PAD_SDA_IN)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(60, GPO_LOW,
+				  GPO_I2C2_PAD_SCK_OEN,
+				  GPI_I2C2_PAD_SCK_IN)>,
+				 <GPIOMUX(59, GPO_LOW,
+				  GPO_I2C2_PAD_SDA_OEN,
+				  GPI_I2C2_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(7,
+				  GPO_PWM_PAD_OUT_BIT0,
+				  GPO_PWM_PAD_OE_N_BIT0,
+				  GPI_NONE)>,
+				 <GPIOMUX(5,
+				  GPO_PWM_PAD_OUT_BIT1,
+				  GPO_PWM_PAD_OE_N_BIT1,
+				  GPI_NONE)>,
+				 <GPIOMUX(45,
+				  GPO_PWM_PAD_OUT_BIT2,
+				  GPO_PWM_PAD_OE_N_BIT2,
+				  GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	sdio0_pins: sdio0-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(55, GPO_LOW, GPO_DISABLE,
+				  GPI_SDIO0_PAD_CARD_DETECT_N)>,
+				 <GPIOMUX(53,
+				  GPO_SDIO0_PAD_CCMD_OUT,
+				  GPO_SDIO0_PAD_CCMD_OEN,
+				  GPI_SDIO0_PAD_CCMD_IN)>,
+				 <GPIOMUX(49,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(50,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(51,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(52,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	sdio1_pins: sdio1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(29,
+				  GPO_SDIO1_PAD_CCMD_OUT,
+				  GPO_SDIO1_PAD_CCMD_OEN,
+				  GPI_SDIO1_PAD_CCMD_IN)>,
+				 <GPIOMUX(36,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(30,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(34,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(31,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	spi2_pins: spi2-0 {
+		mosi-pin {
+			pinmux = <GPIOMUX(18, GPO_SPI2_PAD_TXD,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		miso-pin {
+			pinmux = <GPIOMUX(16, GPO_LOW, GPO_DISABLE,
+				  GPI_SPI2_PAD_RXD)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+		sck-pin {
+			pinmux = <GPIOMUX(12, GPO_SPI2_PAD_SCK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		ss-pins {
+			pinmux = <GPIOMUX(15, GPO_SPI2_PAD_SS_0_N,
+				  GPO_ENABLE, GPI_NONE)>,
+				 <GPIOMUX(11, GPO_SPI2_PAD_SS_1_N,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_pins: uart0-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(40, GPO_LOW, GPO_DISABLE,
+				  GPI_UART0_PAD_SIN)>,
+				 <GPIOMUX(39, GPO_LOW, GPO_DISABLE,
+				  GPI_UART0_PAD_CTSN)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(41, GPO_UART0_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>,
+				 <GPIOMUX(42, GPO_UART0_PAD_RTSN,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart3_pins: uart3-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+				  GPI_UART3_PAD_SIN)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+};
+
 &i2c0 {
 	clock-frequency = <100000>;
 	i2c-sda-hold-time-ns = <300>;
 	i2c-sda-falling-time-ns = <500>;
 	i2c-scl-falling-time-ns = <500>;
-	scl-gpio = <&gpio 62 GPIO_ACTIVE_HIGH>;
-	sda-gpio = <&gpio 61 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	imx219@10 {
@@ -143,8 +437,8 @@
 	i2c-sda-hold-time-ns = <300>;
 	i2c-sda-falling-time-ns = <100>;
 	i2c-scl-falling-time-ns = <100>;
-	scl-gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
-	sda-gpio = <&gpio 48 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	ac108_a: ac108@3b {
@@ -215,8 +509,8 @@
 	i2c-sda-hold-time-ns = <300>;
 	i2c-sda-falling-time-ns = <500>;
 	i2c-scl-falling-time-ns = <500>;
-	scl-gpio = <&gpio 60 GPIO_ACTIVE_HIGH>;
-	sda-gpio = <&gpio 59 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	seeed_plane_i2c@45 {
@@ -261,6 +555,12 @@
 	clock-frequency = <27000000>;
 };
 
+&ptc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &qspi {
 	nor_flash: nor-flash@0 {
 		compatible = "spi-flash";
@@ -297,7 +597,8 @@
 	broken-cd;
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <10000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_pins>;
 	status = "okay";
 };
 
@@ -311,6 +612,8 @@
 	max-frequency = <10000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio1_pins>;
 	status = "okay";
 
 	wifi@1 {
@@ -552,6 +855,8 @@
 };
 
 &spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
 	status = "okay";
 
 	spi_dev0: spi@0 {
@@ -562,10 +867,14 @@
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
 
 &uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 	status = "okay";
 };
 
diff --git a/arch/riscv/dts/jh7100.dtsi b/arch/riscv/dts/jh7100.dtsi
index c20231e99b..eaabebf5b5 100644
--- a/arch/riscv/dts/jh7100.dtsi
+++ b/arch/riscv/dts/jh7100.dtsi
@@ -262,15 +262,17 @@
 			status = "disabled";
 		};
 
-		gpio: gpio@11910000 {
-			compatible = "starfive,jh7100-gpio";
-			reg = <0x0 0x11910000 0x0 0x10000>;
+		gpio: pinctrl@11910000 {
+			compatible = "starfive,jh7100-pinctrl";
+			reg = <0x0 0x11910000 0x0 0x10000>,
+			      <0x0 0x11858000 0x0 0x1000>;
+			reg-names = "gpio", "padctl";
 			clocks = <&clkgen JH7100_CLK_GPIO_APB>;
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupts = <32>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <32>;
 		};
 
 		i2c0: i2c@118b0000 {
@@ -412,7 +414,7 @@
 			clocks = <&clkgen JH7100_CLK_PWM_APB>;
 			#pwm-cells = <3>;
 			sifive,npwm = <8>;
-
+			status = "disabled";
 		};
 
 		qspi: spi@11860000 {
diff --git a/include/dt-bindings/pinctrl/pinctrl-starfive.h b/include/dt-bindings/pinctrl/pinctrl-starfive.h
new file mode 100644
index 0000000000..3dd2a886b9
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-starfive.h
@@ -0,0 +1,274 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+#ifndef _DT_BINDINGS_PINCTRL_STARFIVE_H
+#define _DT_BINDINGS_PINCTRL_STARFIVE_H
+
+#define PAD_GPIO_OFFSET		0
+#define PAD_FUNC_SHARE_OFFSET	64
+#define PAD_GPIO(x)		(PAD_GPIO_OFFSET + (x))
+#define PAD_FUNC_SHARE(x)	(PAD_FUNC_SHARE_OFFSET + (x))
+
+/*
+ * GPIOMUX bits:
+ *  | 31 - 24 | 23 - 16 | 15 - 8 |     7    |     6    |  5 - 0  |
+ *  |  dout   |  doen   |  din   | dout rev | doen rev | gpio nr |
+ *
+ * dout:     output signal
+ * doen:     output enable signal
+ * din:      optional input signal, 0xff = none
+ * dout rev: output signal reverse bit
+ * doen rev: output enable signal reverse bit
+ * gpio nr:  gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+		(((dout) & 0x80000000) >> (31 - 7)) | (((dout) & 0xff) << 24) | \
+		(((doen) & 0x80000000) >> (31 - 6)) | (((doen) & 0xff) << 16) | \
+		(((din) & 0xff) << 8) | \
+		((n) & 0x3f))
+
+#define GPO_REVERSE				0x80000000
+
+#define GPO_LOW					0
+#define GPO_HIGH				1
+#define GPO_ENABLE				0
+#define GPO_DISABLE				1
+#define GPO_CLK_GMAC_PAPHYREF			2
+#define GPO_JTAG_TDO				3
+#define GPO_JTAG_TDO_OEN			4
+#define GPO_DMIC_CLK_OUT			5
+#define GPO_DSP_JTDOEN_PAD			6
+#define GPO_DSP_JTDO_PAD			7
+#define GPO_I2C0_PAD_SCK_OE			8
+#define GPO_I2C0_PAD_SCK_OEN			(GPO_I2C0_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C0_PAD_SDA_OE			9
+#define GPO_I2C0_PAD_SDA_OEN			(GPO_I2C0_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C1_PAD_SCK_OE			10
+#define GPO_I2C1_PAD_SCK_OEN			(GPO_I2C1_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C1_PAD_SDA_OE			11
+#define GPO_I2C1_PAD_SDA_OEN			(GPO_I2C1_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C2_PAD_SCK_OE			12
+#define GPO_I2C2_PAD_SCK_OEN			(GPO_I2C2_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C2_PAD_SDA_OE			13
+#define GPO_I2C2_PAD_SDA_OEN			(GPO_I2C2_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C3_PAD_SCK_OE			14
+#define GPO_I2C3_PAD_SCK_OEN			(GPO_I2C3_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C3_PAD_SDA_OE			15
+#define GPO_I2C3_PAD_SDA_OEN			(GPO_I2C3_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2SRX_BCLK_OUT			16
+#define GPO_I2SRX_BCLK_OUT_OEN			17
+#define GPO_I2SRX_LRCK_OUT			18
+#define GPO_I2SRX_LRCK_OUT_OEN			19
+#define GPO_I2SRX_MCLK_OUT			20
+#define GPO_I2STX_BCLK_OUT			21
+#define GPO_I2STX_BCLK_OUT_OEN			22
+#define GPO_I2STX_LRCK_OUT			23
+#define GPO_I2STX_LRCK_OUT_OEN			24
+#define GPO_I2STX_MCLK_OUT			25
+#define GPO_I2STX_SDOUT0			26
+#define GPO_I2STX_SDOUT1			27
+#define GPO_LCD_PAD_CSM_N			28
+#define GPO_PWM_PAD_OE_N_BIT0			29
+#define GPO_PWM_PAD_OE_N_BIT1			30
+#define GPO_PWM_PAD_OE_N_BIT2			31
+#define GPO_PWM_PAD_OE_N_BIT3			32
+#define GPO_PWM_PAD_OE_N_BIT4			33
+#define GPO_PWM_PAD_OE_N_BIT5			34
+#define GPO_PWM_PAD_OE_N_BIT6			35
+#define GPO_PWM_PAD_OE_N_BIT7			36
+#define GPO_PWM_PAD_OUT_BIT0			37
+#define GPO_PWM_PAD_OUT_BIT1			38
+#define GPO_PWM_PAD_OUT_BIT2			39
+#define GPO_PWM_PAD_OUT_BIT3			40
+#define GPO_PWM_PAD_OUT_BIT4			41
+#define GPO_PWM_PAD_OUT_BIT5			42
+#define GPO_PWM_PAD_OUT_BIT6			43
+#define GPO_PWM_PAD_OUT_BIT7			44
+#define GPO_PWMDAC_LEFT_OUT			45
+#define GPO_PWMDAC_RIGHT_OUT			46
+#define GPO_QSPI_CSN1_OUT			47
+#define GPO_QSPI_CSN2_OUT			48
+#define GPO_QSPI_CSN3_OUT			49
+#define GPO_REGISTER23_SCFG_CMSENSOR_RST0	50
+#define GPO_REGISTER23_SCFG_CMSENSOR_RST1	51
+#define GPO_REGISTER32_SCFG_GMAC_PHY_RSTN	52
+#define GPO_SDIO0_PAD_CARD_POWER_EN		53
+#define GPO_SDIO0_PAD_CCLK_OUT			54
+#define GPO_SDIO0_PAD_CCMD_OE			55
+#define GPO_SDIO0_PAD_CCMD_OEN			(GPO_SDIO0_PAD_CCMD_OE | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CCMD_OUT			56
+#define GPO_SDIO0_PAD_CDATA_OE_BIT0		57
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT0		(GPO_SDIO0_PAD_CDATA_OE_BIT0 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT1		58
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT1		(GPO_SDIO0_PAD_CDATA_OE_BIT1 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT2		59
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT2		(GPO_SDIO0_PAD_CDATA_OE_BIT2 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT3		60
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT3		(GPO_SDIO0_PAD_CDATA_OE_BIT3 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT4		61
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT4		(GPO_SDIO0_PAD_CDATA_OE_BIT4 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT5		62
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT5		(GPO_SDIO0_PAD_CDATA_OE_BIT5 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT6		63
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT6		(GPO_SDIO0_PAD_CDATA_OE_BIT6 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT7		64
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT7		(GPO_SDIO0_PAD_CDATA_OE_BIT7 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT0		65
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT1		66
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT2		67
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT3		68
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT4		69
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT5		70
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT6		71
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT7		72
+#define GPO_SDIO0_PAD_RST_N			73
+#define GPO_SDIO1_PAD_CARD_POWER_EN		74
+#define GPO_SDIO1_PAD_CCLK_OUT			75
+#define GPO_SDIO1_PAD_CCMD_OE			76
+#define GPO_SDIO1_PAD_CCMD_OEN			(GPO_SDIO1_PAD_CCMD_OE | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CCMD_OUT			77
+#define GPO_SDIO1_PAD_CDATA_OE_BIT0		78
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT0		(GPO_SDIO1_PAD_CDATA_OE_BIT0 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT1		79
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT1		(GPO_SDIO1_PAD_CDATA_OE_BIT1 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT2		80
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT2		(GPO_SDIO1_PAD_CDATA_OE_BIT2 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT3		81
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT3		(GPO_SDIO1_PAD_CDATA_OE_BIT3 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT4		82
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT4		(GPO_SDIO1_PAD_CDATA_OE_BIT4 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT5		83
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT5		(GPO_SDIO1_PAD_CDATA_OE_BIT5 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT6		84
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT6		(GPO_SDIO1_PAD_CDATA_OE_BIT6 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT7		85
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT7		(GPO_SDIO1_PAD_CDATA_OE_BIT7 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT0		86
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT1		87
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT2		88
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT3		89
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT4		90
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT5		91
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT6		92
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT7		93
+#define GPO_SDIO1_PAD_RST_N			94
+#define GPO_SPDIF_TX_SDOUT			95
+#define GPO_SPDIF_TX_SDOUT_OEN			96
+#define GPO_SPI0_PAD_OE_N			97
+#define GPO_SPI0_PAD_SCK_OUT			98
+#define GPO_SPI0_PAD_SS_0_N			99
+#define GPO_SPI0_PAD_SS_1_N			100
+#define GPO_SPI0_PAD_TXD			101
+#define GPO_SPI1_PAD_OE_N			102
+#define GPO_SPI1_PAD_SCK_OUT			103
+#define GPO_SPI1_PAD_SS_0_N			104
+#define GPO_SPI1_PAD_SS_1_N			105
+#define GPO_SPI1_PAD_TXD			106
+#define GPO_SPI2_PAD_OE_N			107
+#define GPO_SPI2_PAD_SCK_OUT			108
+#define GPO_SPI2_PAD_SS_0_N			109
+#define GPO_SPI2_PAD_SS_1_N			110
+#define GPO_SPI2_PAD_TXD			111
+#define GPO_SPI2AHB_PAD_OE_N_BIT0		112
+#define GPO_SPI2AHB_PAD_OE_N_BIT1		113
+#define GPO_SPI2AHB_PAD_OE_N_BIT2		114
+#define GPO_SPI2AHB_PAD_OE_N_BIT3		115
+#define GPO_SPI2AHB_PAD_TXD_BIT0		116
+#define GPO_SPI2AHB_PAD_TXD_BIT1		117
+#define GPO_SPI2AHB_PAD_TXD_BIT2		118
+#define GPO_SPI2AHB_PAD_TXD_BIT3		119
+#define GPO_SPI3_PAD_OE_N			120
+#define GPO_SPI3_PAD_SCK_OUT			121
+#define GPO_SPI3_PAD_SS_0_N			122
+#define GPO_SPI3_PAD_SS_1_N			123
+#define GPO_SPI3_PAD_TXD			124
+#define GPO_UART0_PAD_DTRN			125
+#define GPO_UART0_PAD_RTSN			126
+#define GPO_UART0_PAD_SOUT			127
+#define GPO_UART1_PAD_SOUT			128
+#define GPO_UART2_PAD_DTR_N			129
+#define GPO_UART2_PAD_RTS_N			130
+#define GPO_UART2_PAD_SOUT			131
+#define GPO_UART3_PAD_SOUT			132
+#define GPO_USB_DRV_BUS				133
+
+#define GPI_NONE				0xffffffff
+
+#define GPI_CPU_JTAG_TCK			0
+#define GPI_CPU_JTAG_TDI			1
+#define GPI_CPU_JTAG_TMS			2
+#define GPI_CPU_JTAG_TRST			3
+#define GPI_DMIC_SDIN_BIT0			4
+#define GPI_DMIC_SDIN_BIT1			5
+#define GPI_DSP_JTCK_PAD			6
+#define GPI_DSP_JTDI_PAD			7
+#define GPI_DSP_JTMS_PAD			8
+#define GPI_DSP_TRST_PAD			9
+#define GPI_I2C0_PAD_SCK_IN			10
+#define GPI_I2C0_PAD_SDA_IN			11
+#define GPI_I2C1_PAD_SCK_IN			12
+#define GPI_I2C1_PAD_SDA_IN			13
+#define GPI_I2C2_PAD_SCK_IN			14
+#define GPI_I2C2_PAD_SDA_IN			15
+#define GPI_I2C3_PAD_SCK_IN			16
+#define GPI_I2C3_PAD_SDA_IN			17
+#define GPI_I2SRX_BCLK_IN			18
+#define GPI_I2SRX_LRCK_IN			19
+#define GPI_I2SRX_SDIN_BIT0			20
+#define GPI_I2SRX_SDIN_BIT1			21
+#define GPI_I2SRX_SDIN_BIT2			22
+#define GPI_I2STX_BCLK_IN			23
+#define GPI_I2STX_LRCK_IN			24
+#define GPI_SDIO0_PAD_CARD_DETECT_N		25
+#define GPI_SDIO0_PAD_CARD_WRITE_PRT		26
+#define GPI_SDIO0_PAD_CCMD_IN			27
+#define GPI_SDIO0_PAD_CDATA_IN_BIT0		28
+#define GPI_SDIO0_PAD_CDATA_IN_BIT1		29
+#define GPI_SDIO0_PAD_CDATA_IN_BIT2		30
+#define GPI_SDIO0_PAD_CDATA_IN_BIT3		31
+#define GPI_SDIO0_PAD_CDATA_IN_BIT4		32
+#define GPI_SDIO0_PAD_CDATA_IN_BIT5		33
+#define GPI_SDIO0_PAD_CDATA_IN_BIT6		34
+#define GPI_SDIO0_PAD_CDATA_IN_BIT7		35
+#define GPI_SDIO1_PAD_CARD_DETECT_N		36
+#define GPI_SDIO1_PAD_CARD_WRITE_PRT		37
+#define GPI_SDIO1_PAD_CCMD_IN			38
+#define GPI_SDIO1_PAD_CDATA_IN_BIT0		39
+#define GPI_SDIO1_PAD_CDATA_IN_BIT1		40
+#define GPI_SDIO1_PAD_CDATA_IN_BIT2		41
+#define GPI_SDIO1_PAD_CDATA_IN_BIT3		42
+#define GPI_SDIO1_PAD_CDATA_IN_BIT4		43
+#define GPI_SDIO1_PAD_CDATA_IN_BIT5		44
+#define GPI_SDIO1_PAD_CDATA_IN_BIT6		45
+#define GPI_SDIO1_PAD_CDATA_IN_BIT7		46
+#define GPI_SPDIF_RX_SDIN			47
+#define GPI_SPI0_PAD_RXD			48
+#define GPI_SPI0_PAD_SS_IN_N			49
+#define GPI_SPI1_PAD_RXD			50
+#define GPI_SPI1_PAD_SS_IN_N			51
+#define GPI_SPI2_PAD_RXD			52
+#define GPI_SPI2_PAD_SS_IN_N			53
+#define GPI_SPI2AHB_PAD_RXD_BIT0		54
+#define GPI_SPI2AHB_PAD_RXD_BIT1		55
+#define GPI_SPI2AHB_PAD_RXD_BIT2		56
+#define GPI_SPI2AHB_PAD_RXD_BIT3		57
+#define GPI_SPI2AHB_PAD_SS_N			58
+#define GPI_SPI2AHB_SLV_SCLKIN			59
+#define GPI_SPI3_PAD_RXD			60
+#define GPI_SPI3_PAD_SS_IN_N			61
+#define GPI_UART0_PAD_CTSN			62
+#define GPI_UART0_PAD_DCDN			63
+#define GPI_UART0_PAD_DSRN			64
+#define GPI_UART0_PAD_RIN			65
+#define GPI_UART0_PAD_SIN			66
+#define GPI_UART1_PAD_SIN			67
+#define GPI_UART2_PAD_CTS_N			68
+#define GPI_UART2_PAD_DCD_N			69
+#define GPI_UART2_PAD_DSR_N			70
+#define GPI_UART2_PAD_RI_N			71
+#define GPI_UART2_PAD_SIN			72
+#define GPI_UART3_PAD_SIN			73
+#define GPI_USB_OVER_CURRENT			74
+
+#endif