diff options
author | Benoît Thébaudeau <benoit.thebaudeau@advansee.com> | 2013-04-23 14:17:40 +0400 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2013-04-28 13:07:40 +0400 |
commit | ccca7dfd0273af41e5b4bdec7f8731b177a20fde (patch) | |
tree | 015f9912580d549ea1605d967d9ea56adf4ca161 | |
parent | 6adbd30203a2839894d9b61f810d9fedc25a64ff (diff) | |
download | u-boot-ccca7dfd0273af41e5b4bdec7f8731b177a20fde.tar.xz |
Add fuse API and commands
This can be useful for fuse-like hardware, OTP SoC options, etc.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
-rw-r--r-- | README | 1 | ||||
-rw-r--r-- | common/Makefile | 1 | ||||
-rw-r--r-- | common/cmd_fuse.c | 168 | ||||
-rw-r--r-- | doc/README.fuse | 67 | ||||
-rw-r--r-- | include/config_cmd_all.h | 1 | ||||
-rw-r--r-- | include/fuse.h | 44 |
6 files changed, 282 insertions, 0 deletions
@@ -844,6 +844,7 @@ The following options need to be configured: CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_FUSE Device fuse support CONFIG_CMD_GETTIME * Get time since boot CONFIG_CMD_GO * the 'go' command (exec code) CONFIG_CMD_GREPENV * search environment diff --git a/common/Makefile b/common/Makefile index 0e0fff1ffa..1cfb13210f 100644 --- a/common/Makefile +++ b/common/Makefile @@ -111,6 +111,7 @@ ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o +COBJS-$(CONFIG_CMD_FUSE) += cmd_fuse.o COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o diff --git a/common/cmd_fuse.c b/common/cmd_fuse.c new file mode 100644 index 0000000000..f24c01c2d9 --- /dev/null +++ b/common/cmd_fuse.c @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2009-2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the mpc512x iim code: + * Copyright 2008 Silicon Turnkey Express, Inc. + * Martha Marx <mmarx@silicontkx.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <fuse.h> +#include <asm/errno.h> + +static int strtou32(const char *str, unsigned int base, u32 *result) +{ + char *ep; + + *result = simple_strtoul(str, &ep, base); + if (ep == str || *ep != '\0') + return -EINVAL; + + return 0; +} + +static int confirm_prog(void) +{ + puts("Warning: Programming fuses is an irreversible operation!\n" + " This may brick your system.\n" + " Use this command only if you are sure of " + "what you are doing!\n" + "\nReally perform this fuse programming? <y/N>\n"); + + if (getc() == 'y') { + int c; + + putc('y'); + c = getc(); + putc('\n'); + if (c == '\r') + return 1; + } + + puts("Fuse programming aborted\n"); + return 0; +} + +static int do_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const char *op = argc >= 2 ? argv[1] : NULL; + int confirmed = argc >= 3 && !strcmp(argv[2], "-y"); + u32 bank, word, cnt, val; + int ret, i; + + argc -= 2 + confirmed; + argv += 2 + confirmed; + + if (argc < 2 || strtou32(argv[0], 0, &bank) || + strtou32(argv[1], 0, &word)) + return CMD_RET_USAGE; + + if (!strcmp(op, "read")) { + if (argc == 2) + cnt = 1; + else if (argc != 3 || strtou32(argv[2], 0, &cnt)) + return CMD_RET_USAGE; + + printf("Reading bank %u:\n", bank); + for (i = 0; i < cnt; i++, word++) { + if (!(i % 4)) + printf("\nWord 0x%.8x:", word); + + ret = fuse_read(bank, word, &val); + if (ret) + goto err; + + printf(" %.8x", val); + } + putc('\n'); + } else if (!strcmp(op, "sense")) { + if (argc == 2) + cnt = 1; + else if (argc != 3 || strtou32(argv[2], 0, &cnt)) + return CMD_RET_USAGE; + + printf("Sensing bank %u:\n", bank); + for (i = 0; i < cnt; i++, word++) { + if (!(i % 4)) + printf("\nWord 0x%.8x:", word); + + ret = fuse_sense(bank, word, &val); + if (ret) + goto err; + + printf(" %.8x", val); + } + putc('\n'); + } else if (!strcmp(op, "prog")) { + if (argc < 3) + return CMD_RET_USAGE; + + for (i = 2; i < argc; i++, word++) { + if (strtou32(argv[i], 16, &val)) + return CMD_RET_USAGE; + + printf("Programming bank %u word 0x%.8x to 0x%.8x...\n", + bank, word, val); + if (!confirmed && !confirm_prog()) + return CMD_RET_FAILURE; + ret = fuse_prog(bank, word, val); + if (ret) + goto err; + } + } else if (!strcmp(op, "override")) { + if (argc < 3) + return CMD_RET_USAGE; + + for (i = 2; i < argc; i++, word++) { + if (strtou32(argv[i], 16, &val)) + return CMD_RET_USAGE; + + printf("Overriding bank %u word 0x%.8x with " + "0x%.8x...\n", bank, word, val); + ret = fuse_override(bank, word, val); + if (ret) + goto err; + } + } else { + return CMD_RET_USAGE; + } + + return 0; + +err: + puts("ERROR\n"); + return ret; +} + +U_BOOT_CMD( + fuse, CONFIG_SYS_MAXARGS, 0, do_fuse, + "Fuse sub-system", + "read <bank> <word> [<cnt>] - read 1 or 'cnt' fuse words,\n" + " starting at 'word'\n" + "fuse sense <bank> <word> [<cnt>] - sense 1 or 'cnt' fuse words,\n" + " starting at 'word'\n" + "fuse prog [-y] <bank> <word> <hexval> [<hexval>...] - program 1 or\n" + " several fuse words, starting at 'word' (PERMANENT)\n" + "fuse override <bank> <word> <hexval> [<hexval>...] - override 1 or\n" + " several fuse words, starting at 'word'" +); diff --git a/doc/README.fuse b/doc/README.fuse new file mode 100644 index 0000000000..1bc91c44a6 --- /dev/null +++ b/doc/README.fuse @@ -0,0 +1,67 @@ +Fuse API functions and commands + +The fuse API allows to control a fusebox and how it is used by the upper +hardware layers. + +A fuse corresponds to a single non-volatile memory bit that can be programmed +(i.e. blown, set to 1) only once. The programming operation is irreversible. A +fuse that has not been programmed reads 0. + +Fuses can be used by SoCs to store various permanent configuration and data, +e.g. boot configuration, security configuration, MAC addresses, etc. + +A fuse word is the smallest group of fuses that can be read at once from the +fusebox control IP registers. This is limited to 32 bits with the current API. + +A fuse bank is the smallest group of fuse words having a common ID, as defined +by each SoC. + +Upon startup, the fusebox control IP reads the fuse values and stores them to a +volatile shadow cache. + +See the README files of the drivers implementing this API in order to know the +SoC- and implementation-specific details. + +Functions / commands: + + int fuse_read(u32 bank, u32 word, u32 *val); + fuse read <bank> <word> [<cnt>] + Read fuse words from the shadow cache. + + int fuse_sense(u32 bank, u32 word, u32 *val); + fuse sense <bank> <word> [<cnt>] + Sense - i.e. read directly from the fusebox, skipping the shadow cache - + fuse words. This operation does not update the shadow cache. + + This is useful to know the true value of fuses if an override has been + performed (see below). + + int fuse_prog(u32 bank, u32 word, u32 val); + fuse prog [-y] <bank> <word> <hexval> [<hexval>...] + Program fuse words. This operation directly affects the fusebox and is + irreversible. The shadow cache is updated accordingly or not, depending on + each IP. + + Only the bits to be programmed should be set in the input value (i.e. for + fuse bits that have already been programmed and hence should be left + unchanged by a further programming, it is preferable to clear the + corresponding bits in the input value in order not to perform a new + hardware programming operation on these fuse bits). + + int fuse_override(u32 bank, u32 word, u32 val); + fuse override <bank> <word> <hexval> [<hexval>...] + Override fuse words in the shadow cache. + + The fusebox is unaffected, so following this operation, the shadow cache + may differ from the fusebox values. Read or sense operations can then be + used to get the values from the shadow cache or from the fusebox. + + This is useful to change the behaviors linked to some cached fuse values, + either because this is needed only temporarily, or because some of the + fuses have already been programmed or are locked (if the SoC allows to + override a locked fuse). + +Configuration: + + CONFIG_CMD_FUSE + Define this to enable the fuse commands. diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 53a2f054f9..d84706969d 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -40,6 +40,7 @@ #define CONFIG_CMD_FDOS /* Floppy DOS support */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_FUSE /* Device fuse support */ #define CONFIG_CMD_GETTIME /* Get time since boot */ #define CONFIG_CMD_HASH /* calculate hash / digest */ #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ diff --git a/include/fuse.h b/include/fuse.h new file mode 100644 index 0000000000..b964137409 --- /dev/null +++ b/include/fuse.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2009-2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the mpc512x iim code: + * Copyright 2008 Silicon Turnkey Express, Inc. + * Martha Marx <mmarx@silicontkx.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FUSE_H_ +#define _FUSE_H_ + +/* + * Read/Sense/Program/Override interface: + * bank: Fuse bank + * word: Fuse word within the bank + * val: Value to read/write + * + * Returns: 0 on success, not 0 on failure + */ +int fuse_read(u32 bank, u32 word, u32 *val); +int fuse_sense(u32 bank, u32 word, u32 *val); +int fuse_prog(u32 bank, u32 word, u32 val); +int fuse_override(u32 bank, u32 word, u32 val); + +#endif /* _FUSE_H_ */ |