diff options
author | Stefan Roese <sr@denx.de> | 2021-01-25 17:27:19 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2021-02-08 10:53:14 +0300 |
commit | 54504de24da381c4e68560ee706c2da7cbd96742 (patch) | |
tree | 32169d59c2778090eba0079f8d5d79b05e6aaaf4 | |
parent | 6a2fa284aee2981be2c7661b3757ce112de8d528 (diff) | |
download | u-boot-54504de24da381c4e68560ee706c2da7cbd96742.tar.xz |
arm: mvebu: theadorable: Enhance "pcie" test cmd to check link width/speed
This patch changes the board specific "pcie" U-Boot command to not only
check for PCIe device existance but also for the correct link speed
and width that has been established. This cmd can be used by U-Boot
scripts for automated testing, if the PCIe setup is correct. Meaning,
that all PCIe devices are correctly detected and the link speed and
width is corrent.
Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r-- | board/theadorable/theadorable.c | 108 |
1 files changed, 87 insertions, 21 deletions
diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c index 67bc00b65b..4b99d9842e 100644 --- a/board/theadorable/theadorable.c +++ b/board/theadorable/theadorable.c @@ -6,6 +6,7 @@ #include <common.h> #include <command.h> #include <console.h> +#include <dm.h> #include <i2c.h> #include <init.h> #include <net.h> @@ -311,42 +312,107 @@ int board_late_init(void) #endif #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_PCI) -int do_pcie_test(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +static int pcie_get_link_speed_width(pci_dev_t bdf, int *speed, int *width) { - pci_dev_t bdf; + struct udevice *dev; u16 ven_id, dev_id; + u16 lnksta; + int ret; + int pos; - if (argc != 3) - return cmd_usage(cmdtp); + /* + * Check if the PCIe device is detected (sometimes its not available + * on the PCIe bus) + */ + ret = dm_pci_bus_find_bdf(bdf, &dev); + if (ret) + return -ENODEV; + + /* PCIe device found */ + dm_pci_read_config16(dev, PCI_VENDOR_ID, &ven_id); + dm_pci_read_config16(dev, PCI_DEVICE_ID, &dev_id); + printf("Detected PCIe device: VendorID 0x%04x DeviceId 0x%04x @ BDF %d.%d.%d\n", + ven_id, dev_id, PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + + /* Now read EXP_LNKSTA register */ + pos = dm_pci_find_capability(dev, PCI_CAP_ID_EXP); + dm_pci_read_config16(dev, pos + PCI_EXP_LNKSTA, &lnksta); + *speed = lnksta & PCI_EXP_LNKSTA_CLS; + *width = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; - ven_id = simple_strtoul(argv[1], NULL, 16); - dev_id = simple_strtoul(argv[2], NULL, 16); + return 0; +} + +/* + * U-Boot cmd to test for the presence of the directly connected PCIe devices + * the theadorable board. This cmd can be used by U-Boot scripts for automated + * testing, if the PCIe setup is correct. Meaning, that all PCIe devices are + * correctly detected and the link speed and width is corrent. + * + * Here a short script that may be used for an automated test. It results in + * an endless reboot loop, if the PCIe devices are detected correctly. If at + * any time a problem is detected (PCIe device not available or link is + * incorrect), then booting will halt. So just use this "bootcmd" and let the + * board run over a longer time (e.g. one night) and if the board still reboots + * after this time, then everything is okay. + * + * bootcmd=echo bootcount=$bootcount; pcie ;if test $? -eq 0; + * then echo PCIe status okay, resetting...; reset; else; + * echo PCIe status NOT okay, hanging (bootcount=$bootcount); fi; + */ +int do_pcie_test(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +{ + pci_dev_t bdf; + int speed; + int width; + int ret; - printf("Checking for PCIe device: VendorID 0x%04x, DeviceId 0x%04x\n", - ven_id, dev_id); + if (argc != 1) + return cmd_usage(cmdtp); /* - * Check if the PCIe device is detected (somtimes its not available + * Check if the PCIe device is detected (sometimes its not available * on the PCIe bus) */ - bdf = pci_find_device(ven_id, dev_id, 0); - if (bdf == -1) { + + /* Check for PCIe device on PCIe port/bus 0 */ + bdf = PCI_BDF(0, 1, 0); + ret = pcie_get_link_speed_width(bdf, &speed, &width); + if (ret) { /* PCIe device not found! */ - printf("Failed to find PCIe device\n"); - } else { - /* PCIe device found! */ - printf("PCIe device found, resetting board...\n"); + printf("Failed to find PCIe device @ BDF %d.%d.%d\n", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + return CMD_RET_FAILURE; + } - /* default handling: SOFT reset */ - do_reset(NULL, 0, 0, NULL); + printf("Established speed=%d width=%d\n", speed, width); + if ((speed != 1 || width != 1)) { + printf("Detected incorrect speed/width!!!\n"); + return CMD_RET_FAILURE; } - return 0; + /* Check for PCIe device on PCIe port/bus 1 */ + bdf = PCI_BDF(1, 1, 0); + ret = pcie_get_link_speed_width(bdf, &speed, &width); + if (ret) { + /* PCIe device not found! */ + printf("Failed to find PCIe device @ BDF %d.%d.%d\n", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + return CMD_RET_FAILURE; + } + + printf("Established speed=%d width=%d\n", speed, width); + if ((speed != 2 || width != 4)) { + printf("Detected incorrect speed/width!!!\n"); + return CMD_RET_FAILURE; + } + + return CMD_RET_SUCCESS; } U_BOOT_CMD( - pcie, 3, 0, do_pcie_test, - "Test for presence of a PCIe device", - "<VendorID> <DeviceID>" + pcie, 1, 0, do_pcie_test, + "Test for presence of a PCIe devices with correct link", + "" ); #endif |