diff options
author | Tom Rini <trini@konsulko.com> | 2023-01-25 05:07:01 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2023-01-25 05:07:01 +0300 |
commit | 17e8e58fe62c019b2cc26af221b6defc3368229f (patch) | |
tree | f1b57c4446fa8db94c8097399f216de58dd8696a | |
parent | 4e1ab2065e21e48a3087144ab826f12cfb797a65 (diff) | |
parent | cd108f2795777d3cca1d0f00c50bb92f766f6591 (diff) | |
download | u-boot-17e8e58fe62c019b2cc26af221b6defc3368229f.tar.xz |
Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi
This contains some fixes, and the first bunch of some clean up patches
to get rid of legacy GPIO and PMIC code.
Highlight is the DM AXP PMIC driver, which is required to convert some
drivers over to use DM regulators, and also is required to get rid
of some less optimal PMIC setup code in Trusted Firmware. This isn't
enabled by any defconfig yet, but can be enabled manually and works. For
the full glory some patches are still missing, and this requires more
testing, which would be simpler if the core code is upstream.
92 files changed, 617 insertions, 240 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/fel_utils.S b/arch/arm/cpu/armv7/sunxi/fel_utils.S index b2310751d9..78bb1657fc 100644 --- a/arch/arm/cpu/armv7/sunxi/fel_utils.S +++ b/arch/arm/cpu/armv7/sunxi/fel_utils.S @@ -20,8 +20,6 @@ ENTRY(save_boot_params) str lr, [r0, #12] mrc p15, 0, lr, c12, c0, 0 @ Read VBAR str lr, [r0, #16] - mrc p15, 0, lr, c1, c0, 0 @ Read CP15 Control Register - str lr, [r0, #20] b save_boot_params_ret ENDPROC(save_boot_params) @@ -29,8 +27,6 @@ ENTRY(return_to_fel) mov sp, r0 mov lr, r1 ldr r0, =fel_stash - ldr r1, [r0, #20] - mcr p15, 0, r1, c1, c0, 0 @ Write CP15 Control Register ldr r1, [r0, #16] mcr p15, 0, r1, c12, c0, 0 @ Write VBAR ldr r1, [r0, #12] diff --git a/arch/arm/cpu/armv8/fel_utils.S b/arch/arm/cpu/armv8/fel_utils.S index 5266515f14..2fe38a1a04 100644 --- a/arch/arm/cpu/armv8/fel_utils.S +++ b/arch/arm/cpu/armv8/fel_utils.S @@ -39,15 +39,15 @@ ENTRY(return_to_fel) adr x1, fel_stash_addr // to find the fel_stash address in AA32 str w2, [x1] - ldr x0, =0xfa50392f // CPU hotplug magic + ldr w0, =0xfa50392f // CPU hotplug magic #ifdef CONFIG_MACH_SUN50I_H616 - ldr x2, =(SUNXI_R_CPUCFG_BASE + 0x1c0) + ldr w2, =(SUNXI_R_CPUCFG_BASE + 0x1c0) str w0, [x2], #0x4 #elif CONFIG_MACH_SUN50I_H6 - ldr x2, =(SUNXI_RTC_BASE + 0x1b8) // BOOT_CPU_HP_FLAG_REG + ldr w2, =(SUNXI_RTC_BASE + 0x1b8) // BOOT_CPU_HP_FLAG_REG str w0, [x2], #0x4 #else - ldr x2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base + ldr w2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base str w0, [x2, #0x8] #endif adr x0, back_in_32 diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index 2028d5b6a9..e959eb2a40 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -12,9 +12,7 @@ / { aliases { -#ifndef CONFIG_MACH_SUNIV mmc0 = &mmc0; -#endif #if CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 mmc1 = &mmc2; #endif diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index dbe6005daa..6417aee944 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -652,33 +652,6 @@ config MACPWR Set the pin used to power the MAC. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. -config MMC0_CD_PIN - string "Card detect pin for mmc0" - default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I - default "" - ---help--- - Set the card detect pin for mmc0, leave empty to not use cd. This - takes a string in the format understood by sunxi_name_to_gpio, e.g. - PH1 for pin 1 of port H. - -config MMC1_CD_PIN - string "Card detect pin for mmc1" - default "" - ---help--- - See MMC0_CD_PIN help text. - -config MMC2_CD_PIN - string "Card detect pin for mmc2" - default "" - ---help--- - See MMC0_CD_PIN help text. - -config MMC3_CD_PIN - string "Card detect pin for mmc3" - default "" - ---help--- - See MMC0_CD_PIN help text. - config MMC1_PINS_PH bool "Pins for mmc1 are on Port H" depends on MACH_SUN4I || MACH_SUN7I || MACH_SUN8I_R40 diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 0c4b6dd1ca..391a65a549 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -35,7 +35,6 @@ struct fel_stash { uint32_t cpsr; uint32_t sctlr; uint32_t vbar; - uint32_t cr; }; struct fel_stash fel_stash __section(".data"); @@ -365,6 +364,7 @@ static bool sunxi_valid_emmc_boot(struct mmc *mmc) struct blk_desc *bd = mmc_get_blk_desc(mmc); u32 *buffer = (void *)(uintptr_t)CONFIG_TEXT_BASE; struct boot_file_head *egon_head = (void *)buffer; + struct toc0_main_info *toc0_info = (void *)buffer; int bootpart = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config); uint32_t spl_size, emmc_checksum, chksum = 0; ulong count; @@ -391,11 +391,17 @@ static bool sunxi_valid_emmc_boot(struct mmc *mmc) /* Read the first block to do some sanity checks on the eGON header. */ count = blk_dread(bd, 0, 1, buffer); - if (count != 1 || !sunxi_egon_valid(egon_head)) + if (count != 1) + return false; + + if (sunxi_egon_valid(egon_head)) + spl_size = egon_head->length; + else if (sunxi_toc0_valid(toc0_info)) + spl_size = toc0_info->length; + else return false; /* Read the rest of the SPL now we know it's halfway sane. */ - spl_size = buffer[4]; count = blk_dread(bd, 1, DIV_ROUND_UP(spl_size, bd->blksz) - 1, buffer + bd->blksz / 4); diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 6727932f7f..df4fdfaba4 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_EMR1=4 CONFIG_SYS_CLK_FREQ=912000000 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index d1e3b056b4..841fe0d3f0 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PG1" -CONFIG_MMC1_CD_PIN="PG13" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB1_VBUS_PIN="PB10" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index f9d17b1950..befe6d86b2 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB1_VBUS_PIN="PG11" # CONFIG_VIDEO_HDMI is not set CONFIG_VIDEO_VGA_VIA_LCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 8c9043559b..689ea533ee 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB1_VBUS_PIN="PG11" CONFIG_AXP_GPIO=y diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index bccadcc7b4..be49e9323a 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 0a9de5ee67..43cd28c3dd 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 38daf33b95..7c77f38fba 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index d73e64c460..02116995a3 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro-emmc" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_I2C1_ENABLE=y CONFIG_VIDEO_VGA=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 8a6bb885e9..895e8dbcbd 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" -CONFIG_MMC3_CD_PIN="PH11" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_I2C1_ENABLE=y CONFIG_VIDEO_VGA=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 5de6c2d9a9..5bcc9f9f3c 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" -CONFIG_MMC3_CD_PIN="PH0" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig index 6e9bdc27d9..e5881090dd 100644 --- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig +++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb-emmc" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig index e0517459ee..592a79a6c7 100644 --- a/configs/A20-Olimex-SOM204-EVB_defconfig +++ b/configs/A20-Olimex-SOM204-EVB_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig index 351a454339..fc32a86a25 100644 --- a/configs/A33-OLinuXino_defconfig +++ b/configs/A33-OLinuXino_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=15291 CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PB3" diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 9a18af8c6e..9ae3893153 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=123 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_AXP_GPIO=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 7bf3dfcd8a..1087512235 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index 18ee81b637..a5fe76af56 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 CONFIG_MACPWR="PA17" -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH23" CONFIG_USB2_VBUS_PIN="PH23" diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig index bad38a6656..d26aa0bb1b 100644 --- a/configs/Bananapi_m2m_defconfig +++ b/configs/Bananapi_m2m_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=600 CONFIG_DRAM_ZQ=15291 CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PB4" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PH8" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index ab5e53fb62..0c23368741 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig index 04ed79afb6..5eee23ff5e 100644 --- a/configs/Cubieboard4_defconfig +++ b/configs/Cubieboard4_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4" CONFIG_SPL=y CONFIG_MACH_SUN9I=y CONFIG_DRAM_CLK=672 -CONFIG_MMC0_CD_PIN="PH18" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index c017b126b8..71743f7b8a 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index c85468e582..184f305b19 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PH17" CONFIG_USB0_VBUS_DET="PH22" CONFIG_USB0_ID_DET="PH19" diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig index a9bbe8bcff..4bd3b56939 100644 --- a/configs/Empire_electronix_d709_defconfig +++ b/configs/Empire_electronix_d709_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig index fc1f26b7a9..18873dba34 100644 --- a/configs/Empire_electronix_m712_defconfig +++ b/configs/Empire_electronix_m712_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index 99df9cff24..5d05f33798 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index f97dc131f2..5294608459 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_MACPWR="PH23" -CONFIG_MMC0_CD_PIN="PH10" CONFIG_SATAPWR="PB3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 77cb464c93..7b2d93cd05 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index b07dbbde2e..90b181f231 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=122 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index c5d1f40df3..b9ccfcfdcc 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" CONFIG_SPL=y CONFIG_MACH_SUN9I=y CONFIG_DRAM_CLK=672 -CONFIG_MMC0_CD_PIN="PH18" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 8757dcb461..fe9ce808a1 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -5,8 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_MACPWR="PH23" -CONFIG_MMC0_CD_PIN="PH10" -CONFIG_MMC3_CD_PIN="PH11" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="PH26" CONFIG_USB2_VBUS_PIN="PH22" diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig index 238b0073e7..59869b74ac 100644 --- a/configs/Sinlinx_SinA31s_defconfig +++ b/configs/Sinlinx_SinA31s_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA4" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 4eb5300b04..cfb432944d 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PH8" CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:66000,le:90,ri:160,up:3,lo:127,hs:70,vs:20,sync:3,vmode:0" diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig index bb62ae9a7a..348140dcc0 100644 --- a/configs/Sunchip_CX-A99_defconfig +++ b/configs/Sunchip_CX-A99_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN9I=y CONFIG_DRAM_CLK=600 CONFIG_DRAM_ZQ=3881915 CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PH17" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PH15" CONFIG_USB1_VBUS_PIN="PL7" diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index b021b0a886..88a082c056 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PB04" CONFIG_USB0_VBUS_DET="PG01" diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index e0687bf887..9e9bddb764 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PB3" CONFIG_USB1_VBUS_PIN="PG12" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index f1ceb8b552..4f2290c289 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -4,8 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="PH1" -CONFIG_MMC1_CD_PIN="PH2" CONFIG_MMC1_PINS_PH=y CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig index 6701ecce2f..b33c825b18 100644 --- a/configs/Yones_Toptech_BS1078_V2_defconfig +++ b/configs/Yones_Toptech_BS1078_V2_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=420 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA8" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PA15" diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index 588eea2a27..f4edcf4370 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry" CONFIG_SPL=y CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 -CONFIG_MMC0_CD_PIN="PH13" CONFIG_USB1_VBUS_PIN="PH23" # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig index ac3f8f5ab8..25617a8c99 100644 --- a/configs/bananapi_m2_zero_defconfig +++ b/configs/bananapi_m2_zero_defconfig @@ -4,5 +4,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index 5463b046fd..99dc2f7d20 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" CONFIG_SPL=y CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig index 42925eabcb..de46d20545 100644 --- a/configs/beelink_gs1_defconfig +++ b/configs/beelink_gs1_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig index 5d3636e34e..89f063bdd2 100644 --- a/configs/colorfly_e708_q1_defconfig +++ b/configs/colorfly_e708_q1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA8" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PA15" diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig index e1067b66ee..f54a83d929 100644 --- a/configs/difrnce_dit4350_defconfig +++ b/configs/difrnce_dit4350_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-difrnce-dit4350" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=408 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index 60910c3ce3..f5ff69d7d6 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c" CONFIG_SPL=y CONFIG_MACH_SUN4I=y -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" CONFIG_USB0_ID_DET="PH4" diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index 1a5fe06bbe..f5e3a7272d 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=32767 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 436e3a8c20..5cc1a1d57f 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=4 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:100000,le:799,ri:260,up:15,lo:16,hs:1,vs:1,sync:3,vmode:0" diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index 6978f8b0aa..38b20109a5 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_ZQ=127 CONFIG_DRAM_EMR1=4 -CONFIG_MMC0_CD_PIN="PH20" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,lo:15,hs:1,vs:1,sync:3,vmode:0" diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig index 9a90252dbd..e01e184307 100644 --- a/configs/iNet_D978_rev2_defconfig +++ b/configs/iNet_D978_rev2_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=456 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig index c759d7e235..30c28f7085 100644 --- a/configs/icnova-a20-swac_defconfig +++ b/configs/icnova-a20-swac_defconfig @@ -9,7 +9,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_OLD_SUNXI_KERNEL_COMPAT=y -CONFIG_MMC0_CD_PIN="PI5" CONFIG_USB0_VBUS_PIN="PG11" CONFIG_USB0_VBUS_DET="PH7" CONFIG_USB1_VBUS_PIN="PG10" diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig index 3ade9fea82..2035a34d15 100644 --- a/configs/inet86dz_defconfig +++ b/configs/inet86dz_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=63351 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index bd6c45bd66..e4da6c14d0 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig index 1769256b7d..85a3b4e7cc 100644 --- a/configs/inet_q972_defconfig +++ b/configs/inet_q972_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=384 CONFIG_DRAM_ZQ=251 -CONFIG_MMC0_CD_PIN="PA8" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PA15" diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig index 12a43c1ec1..b25c9ba77c 100644 --- a/configs/licheepi_nano_defconfig +++ b/configs/licheepi_nano_defconfig @@ -10,4 +10,3 @@ CONFIG_SPL_SPI_SUNXI=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_XTX=y CONFIG_SPI=y -# CONFIG_SYSRESET is not set diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig index 37b7817d86..76655d79ae 100644 --- a/configs/nanopi_m1_plus_defconfig +++ b/configs/nanopi_m1_plus_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 CONFIG_MACPWR="PD6" -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/oceanic_5205_5inmfd_defconfig b/configs/oceanic_5205_5inmfd_defconfig index 7ce63ba665..2ebca67380 100644 --- a/configs/oceanic_5205_5inmfd_defconfig +++ b/configs/oceanic_5205_5inmfd_defconfig @@ -7,7 +7,6 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 -CONFIG_MMC0_CD_PIN="" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig index ebecf49ebd..125137bc32 100644 --- a/configs/orangepi_3_defconfig +++ b/configs/orangepi_3_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig index 75c97d6b89..577f7436c1 100644 --- a/configs/orangepi_lite2_defconfig +++ b/configs/orangepi_lite2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig index 55a8b003fb..aa5f540eb1 100644 --- a/configs/orangepi_one_plus_defconfig +++ b/configs/orangepi_one_plus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index ceef51b3db..72fc419ca7 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION=y CONFIG_DRAM_SUN50I_H616_READ_TRAINING=y CONFIG_DRAM_SUN50I_H616_WRITE_TRAINING=y CONFIG_MACH_SUN50I_H616=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_R_I2C_ENABLE=y CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 9583d24c8d..393cb0fc32 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig index 55a251374a..057f45e068 100644 --- a/configs/orangepi_zero_plus2_h3_defconfig +++ b/configs/orangepi_zero_plus2_h3_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 # CONFIG_DRAM_ODT_EN is not set -CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig index d56c4504b6..72235ccc07 100644 --- a/configs/parrot_r16_defconfig +++ b/configs/parrot_r16_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=600 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PD14" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PD10" CONFIG_USB1_VBUS_PIN="PD12" diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig index 7e7c2d7910..9583d293c8 100644 --- a/configs/pine64-lts_defconfig +++ b/configs/pine64-lts_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 -CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig index 09a4275f0e..6dac6098d0 100644 --- a/configs/pine_h64_defconfig +++ b/configs/pine_h64_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MACPWR="PC16" -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB3_VBUS_PIN="PL5" CONFIG_SPL_SPI_SUNXI=y diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig index 17fffeb1e2..023f880fa0 100644 --- a/configs/polaroid_mid2407pxe03_defconfig +++ b/configs/polaroid_mid2407pxe03_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63351 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig index e542b71113..2e9efd0f7d 100644 --- a/configs/polaroid_mid2809pxe04_defconfig +++ b/configs/polaroid_mid2809pxe04_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63351 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index f269b8a588..36252e5f89 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet" CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=384 -CONFIG_MMC0_CD_PIN="PG0" CONFIG_USB0_VBUS_PIN="PG12" CONFIG_USB0_VBUS_DET="PG1" CONFIG_USB0_ID_DET="PG2" diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index dda1a0c51f..3bfc5c5700 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A23=y CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63306 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index 7925677d30..9166ec05ce 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=456 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index f3335f9d23..6114fcbc2a 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=456 CONFIG_DRAM_ZQ=15291 -CONFIG_MMC0_CD_PIN="PB4" CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH8" diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig index fbbef7a9f9..a5e1478c11 100644 --- a/configs/sopine_baseboard_defconfig +++ b/configs/sopine_baseboard_defconfig @@ -7,7 +7,6 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 -CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/tanix_tx6_defconfig b/configs/tanix_tx6_defconfig index 0390347415..d734392e9a 100644 --- a/configs/tanix_tx6_defconfig +++ b/configs/tanix_tx6_defconfig @@ -5,6 +5,5 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_DDR3_1333=y CONFIG_DRAM_CLK=648 -CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig index 4276f4f543..38b82c3a3e 100644 --- a/configs/x96_mate_defconfig +++ b/configs/x96_mate_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-x96-mate" CONFIG_SPL=y CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION=y CONFIG_MACH_SUN50I_H616=y -CONFIG_MMC0_CD_PIN="PF6" CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/drivers/clk/sunxi/clk_a64.c b/drivers/clk/sunxi/clk_a64.c index 8c81b1ac45..136ba89293 100644 --- a/drivers/clk/sunxi/clk_a64.c +++ b/drivers/clk/sunxi/clk_a64.c @@ -16,6 +16,7 @@ static const struct ccu_clk_gate a64_gates[] = { [CLK_PLL_PERIPH0] = GATE(0x028, BIT(31)), + [CLK_BUS_MIPI_DSI] = GATE(0x060, BIT(1)), [CLK_BUS_MMC0] = GATE(0x060, BIT(8)), [CLK_BUS_MMC1] = GATE(0x060, BIT(9)), [CLK_BUS_MMC2] = GATE(0x060, BIT(10)), @@ -28,6 +29,11 @@ static const struct ccu_clk_gate a64_gates[] = { [CLK_BUS_OHCI0] = GATE(0x060, BIT(28)), [CLK_BUS_OHCI1] = GATE(0x060, BIT(29)), + [CLK_BUS_TCON0] = GATE(0x064, BIT(3)), + [CLK_BUS_TCON1] = GATE(0x064, BIT(4)), + [CLK_BUS_HDMI] = GATE(0x064, BIT(11)), + [CLK_BUS_DE] = GATE(0x064, BIT(12)), + [CLK_BUS_PIO] = GATE(0x068, BIT(5)), [CLK_BUS_I2C0] = GATE(0x06c, BIT(0)), @@ -48,6 +54,15 @@ static const struct ccu_clk_gate a64_gates[] = { [CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)), [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), + + [CLK_DE] = GATE(0x104, BIT(31)), + [CLK_TCON0] = GATE(0x118, BIT(31)), + [CLK_TCON1] = GATE(0x11c, BIT(31)), + + [CLK_HDMI] = GATE(0x150, BIT(31)), + [CLK_HDMI_DDC] = GATE(0x154, BIT(31)), + + [CLK_DSI_DPHY] = GATE(0x168, BIT(15)), }; static const struct ccu_reset a64_resets[] = { @@ -55,6 +70,7 @@ static const struct ccu_reset a64_resets[] = { [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), [RST_USB_HSIC] = RESET(0x0cc, BIT(2)), + [RST_BUS_MIPI_DSI] = RESET(0x2c0, BIT(1)), [RST_BUS_MMC0] = RESET(0x2c0, BIT(8)), [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)), [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)), @@ -67,6 +83,12 @@ static const struct ccu_reset a64_resets[] = { [RST_BUS_OHCI0] = RESET(0x2c0, BIT(28)), [RST_BUS_OHCI1] = RESET(0x2c0, BIT(29)), + [RST_BUS_TCON0] = RESET(0x2c4, BIT(3)), + [RST_BUS_TCON1] = RESET(0x2c4, BIT(4)), + [RST_BUS_HDMI0] = RESET(0x2c4, BIT(10)), + [RST_BUS_HDMI1] = RESET(0x2c4, BIT(11)), + [RST_BUS_DE] = RESET(0x2c4, BIT(12)), + [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)), [RST_BUS_I2C2] = RESET(0x2d8, BIT(2)), diff --git a/drivers/clk/sunxi/clk_a83t.c b/drivers/clk/sunxi/clk_a83t.c index 3562da61d1..d5af37b3d7 100644 --- a/drivers/clk/sunxi/clk_a83t.c +++ b/drivers/clk/sunxi/clk_a83t.c @@ -14,6 +14,7 @@ #include <linux/bitops.h> static struct ccu_clk_gate a83t_gates[] = { + [CLK_BUS_MIPI_DSI] = GATE(0x060, BIT(1)), [CLK_BUS_MMC0] = GATE(0x060, BIT(8)), [CLK_BUS_MMC1] = GATE(0x060, BIT(9)), [CLK_BUS_MMC2] = GATE(0x060, BIT(10)), @@ -25,6 +26,11 @@ static struct ccu_clk_gate a83t_gates[] = { [CLK_BUS_EHCI1] = GATE(0x060, BIT(27)), [CLK_BUS_OHCI0] = GATE(0x060, BIT(29)), + [CLK_BUS_TCON0] = GATE(0x064, BIT(4)), + [CLK_BUS_TCON1] = GATE(0x064, BIT(5)), + [CLK_BUS_HDMI] = GATE(0x064, BIT(11)), + [CLK_BUS_DE] = GATE(0x064, BIT(12)), + [CLK_BUS_PIO] = GATE(0x068, BIT(5)), [CLK_BUS_I2C0] = GATE(0x06c, BIT(0)), @@ -44,6 +50,15 @@ static struct ccu_clk_gate a83t_gates[] = { [CLK_USB_HSIC] = GATE(0x0cc, BIT(10)), [CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)), [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), + + [CLK_TCON0] = GATE(0x118, BIT(31)), + [CLK_TCON1] = GATE(0x11c, BIT(31)), + + [CLK_HDMI] = GATE(0x150, BIT(31)), + [CLK_HDMI_SLOW] = GATE(0x154, BIT(31)), + + [CLK_MIPI_DSI0] = GATE(0x168, BIT(31)), + [CLK_MIPI_DSI1] = GATE(0x16c, BIT(31)), }; static struct ccu_reset a83t_resets[] = { @@ -51,6 +66,7 @@ static struct ccu_reset a83t_resets[] = { [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), [RST_USB_HSIC] = RESET(0x0cc, BIT(2)), + [RST_BUS_MIPI_DSI] = RESET(0x2c0, BIT(1)), [RST_BUS_MMC0] = RESET(0x2c0, BIT(8)), [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)), [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)), @@ -62,6 +78,12 @@ static struct ccu_reset a83t_resets[] = { [RST_BUS_EHCI1] = RESET(0x2c0, BIT(27)), [RST_BUS_OHCI0] = RESET(0x2c0, BIT(29)), + [RST_BUS_TCON0] = RESET(0x2c4, BIT(4)), + [RST_BUS_TCON1] = RESET(0x2c4, BIT(5)), + [RST_BUS_HDMI0] = RESET(0x2c4, BIT(10)), + [RST_BUS_HDMI1] = RESET(0x2c4, BIT(11)), + [RST_BUS_DE] = RESET(0x2c4, BIT(12)), + [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)), [RST_BUS_I2C2] = RESET(0x2d8, BIT(2)), diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c index 17ab3b5c27..213ab510ed 100644 --- a/drivers/clk/sunxi/clk_h3.c +++ b/drivers/clk/sunxi/clk_h3.c @@ -32,6 +32,11 @@ static struct ccu_clk_gate h3_gates[] = { [CLK_BUS_OHCI2] = GATE(0x060, BIT(30)), [CLK_BUS_OHCI3] = GATE(0x060, BIT(31)), + [CLK_BUS_TCON0] = GATE(0x064, BIT(3)), + [CLK_BUS_TCON1] = GATE(0x064, BIT(4)), + [CLK_BUS_HDMI] = GATE(0x064, BIT(11)), + [CLK_BUS_DE] = GATE(0x064, BIT(12)), + [CLK_BUS_PIO] = GATE(0x068, BIT(5)), [CLK_BUS_I2C0] = GATE(0x06c, BIT(0)), @@ -55,6 +60,12 @@ static struct ccu_clk_gate h3_gates[] = { [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), [CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)), [CLK_USB_OHCI3] = GATE(0x0cc, BIT(19)), + + [CLK_DE] = GATE(0x104, BIT(31)), + [CLK_TCON0] = GATE(0x118, BIT(31)), + + [CLK_HDMI] = GATE(0x150, BIT(31)), + [CLK_HDMI_DDC] = GATE(0x154, BIT(31)), }; static struct ccu_reset h3_resets[] = { @@ -79,6 +90,12 @@ static struct ccu_reset h3_resets[] = { [RST_BUS_OHCI2] = RESET(0x2c0, BIT(30)), [RST_BUS_OHCI3] = RESET(0x2c0, BIT(31)), + [RST_BUS_TCON0] = RESET(0x2c4, BIT(3)), + [RST_BUS_TCON1] = RESET(0x2c4, BIT(4)), + [RST_BUS_HDMI0] = RESET(0x2c4, BIT(10)), + [RST_BUS_HDMI1] = RESET(0x2c4, BIT(11)), + [RST_BUS_DE] = RESET(0x2c4, BIT(12)), + [RST_BUS_EPHY] = RESET(0x2c8, BIT(2)), [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), diff --git a/drivers/clk/sunxi/clk_h6.c b/drivers/clk/sunxi/clk_h6.c index 041bc5e80e..24eb9725db 100644 --- a/drivers/clk/sunxi/clk_h6.c +++ b/drivers/clk/sunxi/clk_h6.c @@ -18,6 +18,9 @@ static struct ccu_clk_gate h6_gates[] = { [CLK_APB1] = GATE_DUMMY, + [CLK_DE] = GATE(0x600, BIT(31)), + [CLK_BUS_DE] = GATE(0x60c, BIT(0)), + [CLK_BUS_MMC0] = GATE(0x84c, BIT(0)), [CLK_BUS_MMC1] = GATE(0x84c, BIT(1)), [CLK_BUS_MMC2] = GATE(0x84c, BIT(2)), @@ -55,9 +58,21 @@ static struct ccu_clk_gate h6_gates[] = { [CLK_BUS_XHCI] = GATE(0xa8c, BIT(5)), [CLK_BUS_EHCI3] = GATE(0xa8c, BIT(7)), [CLK_BUS_OTG] = GATE(0xa8c, BIT(8)), + + [CLK_HDMI] = GATE(0xb00, BIT(31)), + [CLK_HDMI_SLOW] = GATE(0xb04, BIT(31)), + [CLK_HDMI_CEC] = GATE(0xb10, BIT(31)), + [CLK_BUS_HDMI] = GATE(0xb1c, BIT(0)), + [CLK_BUS_TCON_TOP] = GATE(0xb5c, BIT(0)), + [CLK_TCON_LCD0] = GATE(0xb60, BIT(31)), + [CLK_BUS_TCON_LCD0] = GATE(0xb7c, BIT(0)), + [CLK_TCON_TV0] = GATE(0xb80, BIT(31)), + [CLK_BUS_TCON_TV0] = GATE(0xb9c, BIT(0)), }; static struct ccu_reset h6_resets[] = { + [RST_BUS_DE] = RESET(0x60c, BIT(16)), + [RST_BUS_MMC0] = RESET(0x84c, BIT(16)), [RST_BUS_MMC1] = RESET(0x84c, BIT(17)), [RST_BUS_MMC2] = RESET(0x84c, BIT(18)), @@ -89,6 +104,12 @@ static struct ccu_reset h6_resets[] = { [RST_BUS_XHCI] = RESET(0xa8c, BIT(21)), [RST_BUS_EHCI3] = RESET(0xa8c, BIT(23)), [RST_BUS_OTG] = RESET(0xa8c, BIT(24)), + + [RST_BUS_HDMI] = RESET(0xb1c, BIT(16)), + [RST_BUS_HDMI_SUB] = RESET(0xb1c, BIT(17)), + [RST_BUS_TCON_TOP] = RESET(0xb5c, BIT(16)), + [RST_BUS_TCON_LCD0] = RESET(0xb7c, BIT(16)), + [RST_BUS_TCON_TV0] = RESET(0xb9c, BIT(16)), }; const struct ccu_desc h6_ccu_desc = { diff --git a/drivers/clk/sunxi/clk_h616.c b/drivers/clk/sunxi/clk_h616.c index 964636d728..88d6bf3420 100644 --- a/drivers/clk/sunxi/clk_h616.c +++ b/drivers/clk/sunxi/clk_h616.c @@ -17,6 +17,9 @@ static struct ccu_clk_gate h616_gates[] = { [CLK_APB1] = GATE_DUMMY, + [CLK_DE] = GATE(0x600, BIT(31)), + [CLK_BUS_DE] = GATE(0x60c, BIT(0)), + [CLK_BUS_MMC0] = GATE(0x84c, BIT(0)), [CLK_BUS_MMC1] = GATE(0x84c, BIT(1)), [CLK_BUS_MMC2] = GATE(0x84c, BIT(2)), @@ -64,9 +67,21 @@ static struct ccu_clk_gate h616_gates[] = { [CLK_BUS_EHCI2] = GATE(0xa8c, BIT(6)), [CLK_BUS_EHCI3] = GATE(0xa8c, BIT(7)), [CLK_BUS_OTG] = GATE(0xa8c, BIT(8)), + + [CLK_HDMI] = GATE(0xb00, BIT(31)), + [CLK_HDMI_SLOW] = GATE(0xb04, BIT(31)), + [CLK_HDMI_CEC] = GATE(0xb10, BIT(31)), + [CLK_BUS_HDMI] = GATE(0xb1c, BIT(0)), + [CLK_BUS_TCON_TOP] = GATE(0xb5c, BIT(0)), + [CLK_TCON_TV0] = GATE(0xb80, BIT(31)), + [CLK_TCON_TV1] = GATE(0xb84, BIT(31)), + [CLK_BUS_TCON_TV0] = GATE(0xb9c, BIT(0)), + [CLK_BUS_TCON_TV1] = GATE(0xb9c, BIT(1)), }; static struct ccu_reset h616_resets[] = { + [RST_BUS_DE] = RESET(0x60c, BIT(16)), + [RST_BUS_MMC0] = RESET(0x84c, BIT(16)), [RST_BUS_MMC1] = RESET(0x84c, BIT(17)), [RST_BUS_MMC2] = RESET(0x84c, BIT(18)), @@ -107,6 +122,12 @@ static struct ccu_reset h616_resets[] = { [RST_BUS_EHCI2] = RESET(0xa8c, BIT(22)), [RST_BUS_EHCI3] = RESET(0xa8c, BIT(23)), [RST_BUS_OTG] = RESET(0xa8c, BIT(24)), + + [RST_BUS_HDMI] = RESET(0xb1c, BIT(16)), + [RST_BUS_HDMI_SUB] = RESET(0xb1c, BIT(17)), + [RST_BUS_TCON_TOP] = RESET(0xb5c, BIT(16)), + [RST_BUS_TCON_TV0] = RESET(0xb9c, BIT(16)), + [RST_BUS_TCON_TV1] = RESET(0xb9c, BIT(17)), }; const struct ccu_desc h616_ccu_desc = { diff --git a/drivers/clk/sunxi/clk_r40.c b/drivers/clk/sunxi/clk_r40.c index ef743d65b7..630e80d2b4 100644 --- a/drivers/clk/sunxi/clk_r40.c +++ b/drivers/clk/sunxi/clk_r40.c @@ -14,6 +14,7 @@ #include <linux/bitops.h> static struct ccu_clk_gate r40_gates[] = { + [CLK_BUS_MIPI_DSI] = GATE(0x060, BIT(1)), [CLK_BUS_MMC0] = GATE(0x060, BIT(8)), [CLK_BUS_MMC1] = GATE(0x060, BIT(9)), [CLK_BUS_MMC2] = GATE(0x060, BIT(10)), @@ -30,7 +31,15 @@ static struct ccu_clk_gate r40_gates[] = { [CLK_BUS_OHCI1] = GATE(0x060, BIT(30)), [CLK_BUS_OHCI2] = GATE(0x060, BIT(31)), + [CLK_BUS_HDMI0] = GATE(0x064, BIT(10)), + [CLK_BUS_HDMI1] = GATE(0x064, BIT(11)), + [CLK_BUS_DE] = GATE(0x064, BIT(12)), [CLK_BUS_GMAC] = GATE(0x064, BIT(17)), + [CLK_BUS_TCON_LCD0] = GATE(0x064, BIT(26)), + [CLK_BUS_TCON_LCD1] = GATE(0x064, BIT(27)), + [CLK_BUS_TCON_TV0] = GATE(0x064, BIT(28)), + [CLK_BUS_TCON_TV1] = GATE(0x064, BIT(29)), + [CLK_BUS_TCON_TOP] = GATE(0x064, BIT(30)), [CLK_BUS_PIO] = GATE(0x068, BIT(5)), @@ -59,6 +68,17 @@ static struct ccu_clk_gate r40_gates[] = { [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), [CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)), + + [CLK_DE] = GATE(0x104, BIT(31)), + [CLK_TCON_LCD0] = GATE(0x110, BIT(31)), + [CLK_TCON_LCD1] = GATE(0x114, BIT(31)), + [CLK_TCON_TV0] = GATE(0x118, BIT(31)), + [CLK_TCON_TV1] = GATE(0x11c, BIT(31)), + + [CLK_HDMI] = GATE(0x150, BIT(31)), + [CLK_HDMI_SLOW] = GATE(0x154, BIT(31)), + + [CLK_DSI_DPHY] = GATE(0x168, BIT(15)), }; static struct ccu_reset r40_resets[] = { @@ -66,6 +86,7 @@ static struct ccu_reset r40_resets[] = { [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), [RST_USB_PHY2] = RESET(0x0cc, BIT(2)), + [RST_BUS_MIPI_DSI] = RESET(0x2c0, BIT(1)), [RST_BUS_MMC0] = RESET(0x2c0, BIT(8)), [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)), [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)), @@ -82,7 +103,15 @@ static struct ccu_reset r40_resets[] = { [RST_BUS_OHCI1] = RESET(0x2c0, BIT(30)), [RST_BUS_OHCI2] = RESET(0x2c0, BIT(31)), + [RST_BUS_HDMI0] = RESET(0x2c4, BIT(10)), + [RST_BUS_HDMI1] = RESET(0x2c4, BIT(11)), + [RST_BUS_DE] = RESET(0x2c4, BIT(12)), [RST_BUS_GMAC] = RESET(0x2c4, BIT(17)), + [RST_BUS_TCON_LCD0] = RESET(0x2c4, BIT(26)), + [RST_BUS_TCON_LCD1] = RESET(0x2c4, BIT(27)), + [RST_BUS_TCON_TV0] = RESET(0x2c4, BIT(28)), + [RST_BUS_TCON_TV1] = RESET(0x2c4, BIT(29)), + [RST_BUS_TCON_TOP] = RESET(0x2c4, BIT(30)), [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)), diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c index f2fd11eac2..6524c13540 100644 --- a/drivers/clk/sunxi/clk_v3s.c +++ b/drivers/clk/sunxi/clk_v3s.c @@ -20,6 +20,9 @@ static struct ccu_clk_gate v3s_gates[] = { [CLK_BUS_SPI0] = GATE(0x060, BIT(20)), [CLK_BUS_OTG] = GATE(0x060, BIT(24)), + [CLK_BUS_TCON0] = GATE(0x064, BIT(4)), + [CLK_BUS_DE] = GATE(0x064, BIT(12)), + [CLK_BUS_PIO] = GATE(0x068, BIT(5)), [CLK_BUS_I2C0] = GATE(0x06c, BIT(0)), @@ -31,6 +34,9 @@ static struct ccu_clk_gate v3s_gates[] = { [CLK_SPI0] = GATE(0x0a0, BIT(31)), [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + + [CLK_DE] = GATE(0x104, BIT(31)), + [CLK_TCON0] = GATE(0x118, BIT(31)), }; static struct ccu_reset v3s_resets[] = { @@ -42,6 +48,9 @@ static struct ccu_reset v3s_resets[] = { [RST_BUS_SPI0] = RESET(0x2c0, BIT(20)), [RST_BUS_OTG] = RESET(0x2c0, BIT(24)), + [RST_BUS_TCON0] = RESET(0x2c4, BIT(4)), + [RST_BUS_DE] = RESET(0x2c4, BIT(12)), + [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)), [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 1bb7b6d0e9..23bc7da917 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -5,6 +5,12 @@ * Aaron <leafy.myeh@allwinnertech.com> * * MMC driver for allwinner sunxi platform. + * + * This driver is used by the (ARM) SPL with the legacy MMC interface, and + * by U-Boot proper using the full DM interface. The actual hardware access + * code is common, and comes first in this file. + * The legacy MMC interface implementation comes next, followed by the + * proper DM_MMC implementation at the end. */ #include <common.h> @@ -40,69 +46,6 @@ struct sunxi_mmc_priv { struct mmc_config cfg; }; -#if !CONFIG_IS_ENABLED(DM_MMC) -/* support 4 mmc hosts */ -struct sunxi_mmc_priv mmc_host[4]; - -static int sunxi_mmc_getcd_gpio(int sdc_no) -{ - switch (sdc_no) { - case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); - case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); - case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); - case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); - } - return -EINVAL; -} - -static int mmc_resource_init(int sdc_no) -{ - struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - int cd_pin, ret = 0; - - debug("init mmc %d resource\n", sdc_no); - - switch (sdc_no) { - case 0: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; - priv->mclkreg = &ccm->sd0_clk_cfg; - break; - case 1: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; - priv->mclkreg = &ccm->sd1_clk_cfg; - break; -#ifdef SUNXI_MMC2_BASE - case 2: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; - priv->mclkreg = &ccm->sd2_clk_cfg; - break; -#endif -#ifdef SUNXI_MMC3_BASE - case 3: - priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; - priv->mclkreg = &ccm->sd3_clk_cfg; - break; -#endif - default: - printf("Wrong mmc number %d\n", sdc_no); - return -1; - } - priv->mmc_no = sdc_no; - - cd_pin = sunxi_mmc_getcd_gpio(sdc_no); - if (cd_pin >= 0) { - ret = gpio_request(cd_pin, "mmc_cd"); - if (!ret) { - sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP); - ret = gpio_direction_input(cd_pin); - } - } - - return ret; -} -#endif - /* * All A64 and later MMC controllers feature auto-calibration. This would * normally be detected via the compatible string, but we need something @@ -290,19 +233,6 @@ static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv, return 0; } -#if !CONFIG_IS_ENABLED(DM_MMC) -static int sunxi_mmc_core_init(struct mmc *mmc) -{ - struct sunxi_mmc_priv *priv = mmc->priv; - - /* Reset controller */ - writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl); - udelay(1000); - - return 0; -} -#endif - static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc, struct mmc_data *data) { @@ -507,39 +437,80 @@ out: return error; } +/* non-DM code here is used by the (ARM) SPL only */ + #if !CONFIG_IS_ENABLED(DM_MMC) -static int sunxi_mmc_set_ios_legacy(struct mmc *mmc) +/* support 4 mmc hosts */ +struct sunxi_mmc_priv mmc_host[4]; + +static int mmc_resource_init(int sdc_no) { - struct sunxi_mmc_priv *priv = mmc->priv; + struct sunxi_mmc_priv *priv = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - return sunxi_mmc_set_ios_common(priv, mmc); + debug("init mmc %d resource\n", sdc_no); + + switch (sdc_no) { + case 0: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; + priv->mclkreg = &ccm->sd0_clk_cfg; + break; + case 1: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; + priv->mclkreg = &ccm->sd1_clk_cfg; + break; +#ifdef SUNXI_MMC2_BASE + case 2: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; + priv->mclkreg = &ccm->sd2_clk_cfg; + break; +#endif +#ifdef SUNXI_MMC3_BASE + case 3: + priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; + priv->mclkreg = &ccm->sd3_clk_cfg; + break; +#endif + default: + printf("Wrong mmc number %d\n", sdc_no); + return -1; + } + priv->mmc_no = sdc_no; + + return 0; } -static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) +static int sunxi_mmc_core_init(struct mmc *mmc) { struct sunxi_mmc_priv *priv = mmc->priv; - return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data); + /* Reset controller */ + writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl); + udelay(1000); + + return 0; } -static int sunxi_mmc_getcd_legacy(struct mmc *mmc) +static int sunxi_mmc_set_ios_legacy(struct mmc *mmc) { struct sunxi_mmc_priv *priv = mmc->priv; - int cd_pin; - cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no); - if (cd_pin < 0) - return 1; + return sunxi_mmc_set_ios_common(priv, mmc); +} - return !gpio_get_value(cd_pin); +static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct sunxi_mmc_priv *priv = mmc->priv; + + return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data); } +/* .getcd is not needed by the SPL */ static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd_legacy, .set_ios = sunxi_mmc_set_ios_legacy, .init = sunxi_mmc_core_init, - .getcd = sunxi_mmc_getcd_legacy, }; struct mmc *sunxi_mmc_init(int sdc_no) @@ -595,7 +566,8 @@ struct mmc *sunxi_mmc_init(int sdc_no) return mmc_create(cfg, priv); } -#else + +#else /* CONFIG_DM_MMC code below, as used by U-Boot proper */ static int sunxi_mmc_set_ios(struct udevice *dev) { diff --git a/drivers/power/pmic/axp.c b/drivers/power/pmic/axp.c index 0f2b24a8b5..025dac24f2 100644 --- a/drivers/power/pmic/axp.c +++ b/drivers/power/pmic/axp.c @@ -45,14 +45,32 @@ static struct dm_pmic_ops axp_pmic_ops = { .write = dm_i2c_write, }; +static const struct pmic_child_info axp_pmic_child_info[] = { + { "aldo", "axp_regulator" }, + { "bldo", "axp_regulator" }, + { "cldo", "axp_regulator" }, + { "dc", "axp_regulator" }, + { "dldo", "axp_regulator" }, + { "eldo", "axp_regulator" }, + { "fldo", "axp_regulator" }, + { "ldo", "axp_regulator" }, + { "sw", "axp_regulator" }, + { } +}; + static int axp_pmic_bind(struct udevice *dev) { + ofnode regulators_node; int ret; ret = dm_scan_fdt_dev(dev); if (ret) return ret; + regulators_node = dev_read_subnode(dev, "regulators"); + if (ofnode_valid(regulators_node)) + pmic_bind_children(dev, regulators_node, axp_pmic_child_info); + if (CONFIG_IS_ENABLED(SYSRESET)) { ret = device_bind_driver_to_node(dev, "axp_sysreset", "axp_sysreset", dev_ofnode(dev), NULL); @@ -64,15 +82,15 @@ static int axp_pmic_bind(struct udevice *dev) } static const struct udevice_id axp_pmic_ids[] = { - { .compatible = "x-powers,axp152" }, - { .compatible = "x-powers,axp202" }, - { .compatible = "x-powers,axp209" }, - { .compatible = "x-powers,axp221" }, - { .compatible = "x-powers,axp223" }, - { .compatible = "x-powers,axp803" }, - { .compatible = "x-powers,axp806" }, - { .compatible = "x-powers,axp809" }, - { .compatible = "x-powers,axp813" }, + { .compatible = "x-powers,axp152", .data = AXP152_ID }, + { .compatible = "x-powers,axp202", .data = AXP202_ID }, + { .compatible = "x-powers,axp209", .data = AXP209_ID }, + { .compatible = "x-powers,axp221", .data = AXP221_ID }, + { .compatible = "x-powers,axp223", .data = AXP223_ID }, + { .compatible = "x-powers,axp803", .data = AXP803_ID }, + { .compatible = "x-powers,axp806", .data = AXP806_ID }, + { .compatible = "x-powers,axp809", .data = AXP809_ID }, + { .compatible = "x-powers,axp813", .data = AXP813_ID }, { } }; diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index c02e6377d8..c346d03507 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -43,6 +43,20 @@ config REGULATOR_AS3722 but does not yet support change voltages. Currently this must be done using direct register writes to the PMIC. +config REGULATOR_AXP + bool "Enable driver for X-Powers AXP PMIC regulators" + depends on DM_REGULATOR && PMIC_AXP + help + Enable support for the regulators (DCDCs, LDOs) in the + X-Powers AXP152, AXP2xx, and AXP8xx PMICs. + +config SPL_REGULATOR_AXP + bool "Enable driver for X-Powers AXP PMIC regulators in SPL" + depends on SPL_DM_REGULATOR && SPL_PMIC_AXP + help + Enable support in SPL for the regulators (DCDCs, LDOs) in the + X-Powers AXP152, AXP2xx, and AXP8xx PMICs. + config DM_REGULATOR_BD71837 bool "Enable Driver Model for ROHM BD71837/BD71847 regulators" depends on DM_REGULATOR && DM_PMIC_BD71837 diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index 68e4c0f9dd..2d97e1033a 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o +obj-$(CONFIG_$(SPL_)REGULATOR_AXP) += axp_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_DM_REGULATOR_NPCM8XX) += npcm8xx_regulator.o diff --git a/drivers/power/regulator/axp_regulator.c b/drivers/power/regulator/axp_regulator.c new file mode 100644 index 0000000000..02f320eac1 --- /dev/null +++ b/drivers/power/regulator/axp_regulator.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2018-2023 Samuel Holland <samuel@sholland.org> + */ + +#include <axp_pmic.h> +#include <dm.h> +#include <errno.h> +#include <dm/device-internal.h> +#include <power/pmic.h> +#include <power/regulator.h> + +#define NA 0xff + +struct axp_regulator_plat { + const char *name; + u8 enable_reg; + u8 enable_mask; + u8 volt_reg; + u8 volt_mask; + u16 min_mV; + u16 max_mV; + u8 step_mV; + u8 split; + const u16 *table; +}; + +static int axp_regulator_get_value(struct udevice *dev) +{ + const struct axp_regulator_plat *plat = dev_get_plat(dev); + int mV, sel; + + if (plat->volt_reg == NA) + return -EINVAL; + + sel = pmic_reg_read(dev->parent, plat->volt_reg); + if (sel < 0) + return sel; + + sel &= plat->volt_mask; + sel >>= ffs(plat->volt_mask) - 1; + + if (plat->table) { + mV = plat->table[sel]; + } else { + if (sel > plat->split) + sel = plat->split + (sel - plat->split) * 2; + mV = plat->min_mV + sel * plat->step_mV; + } + + return mV * 1000; +} + +static int axp_regulator_set_value(struct udevice *dev, int uV) +{ + const struct axp_regulator_plat *plat = dev_get_plat(dev); + int mV = uV / 1000; + uint sel, shift; + + if (plat->volt_reg == NA) + return -EINVAL; + if (mV < plat->min_mV || mV > plat->max_mV) + return -EINVAL; + + shift = ffs(plat->volt_mask) - 1; + + if (plat->table) { + /* + * The table must be monotonically increasing and + * have an entry for each possible field value. + */ + sel = plat->volt_mask >> shift; + while (sel && plat->table[sel] > mV) + sel--; + } else { + sel = (mV - plat->min_mV) / plat->step_mV; + if (sel > plat->split) + sel = plat->split + (sel - plat->split) / 2; + } + + return pmic_clrsetbits(dev->parent, plat->volt_reg, + plat->volt_mask, sel << shift); +} + +static int axp_regulator_get_enable(struct udevice *dev) +{ + const struct axp_regulator_plat *plat = dev_get_plat(dev); + int reg; + + reg = pmic_reg_read(dev->parent, plat->enable_reg); + if (reg < 0) + return reg; + + return (reg & plat->enable_mask) == plat->enable_mask; +} + +static int axp_regulator_set_enable(struct udevice *dev, bool enable) +{ + const struct axp_regulator_plat *plat = dev_get_plat(dev); + + return pmic_clrsetbits(dev->parent, plat->enable_reg, + plat->enable_mask, + enable ? plat->enable_mask : 0); +} + +static const struct dm_regulator_ops axp_regulator_ops = { + .get_value = axp_regulator_get_value, + .set_value = axp_regulator_set_value, + .get_enable = axp_regulator_get_enable, + .set_enable = axp_regulator_set_enable, +}; + +static const u16 axp152_dcdc1_table[] = { + 1700, 1800, 1900, 2000, 2100, 2400, 2500, 2600, + 2700, 2800, 3000, 3100, 3200, 3300, 3400, 3500, +}; + +static const u16 axp152_aldo12_table[] = { + 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, + 2000, 2500, 2700, 2800, 3000, 3100, 3200, 3300, +}; + +static const u16 axp152_ldo0_table[] = { + 5000, 3300, 2800, 2500, +}; + +static const struct axp_regulator_plat axp152_regulators[] = { + { "dcdc1", 0x12, BIT(7), 0x26, 0x0f, .table = axp152_dcdc1_table }, + { "dcdc2", 0x12, BIT(6), 0x23, 0x3f, 700, 2275, 25, NA }, + { "dcdc3", 0x12, BIT(5), 0x27, 0x3f, 700, 3500, 50, NA }, + { "dcdc4", 0x12, BIT(4), 0x2b, 0x7f, 700, 3500, 25, NA }, + { "aldo1", 0x12, BIT(3), 0x28, 0xf0, .table = axp152_aldo12_table }, + { "aldo2", 0x12, BIT(2), 0x28, 0x0f, .table = axp152_aldo12_table }, + { "dldo1", 0x12, BIT(1), 0x29, 0x1f, 700, 3500, 100, NA }, + { "dldo2", 0x12, BIT(0), 0x2a, 0x1f, 700, 3500, 100, NA }, + { "ldo0", 0x15, BIT(7), 0x15, 0x30, .table = axp152_ldo0_table }, + { } +}; + +static const u16 axp20x_ldo4_table[] = { + 1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, + 2000, 2500, 2700, 2800, 3000, 3100, 3200, 3300, +}; + +static const struct axp_regulator_plat axp20x_regulators[] = { + { "dcdc2", 0x12, BIT(4), 0x23, 0x3f, 700, 2275, 25, NA }, + { "dcdc3", 0x12, BIT(1), 0x27, 0x7f, 700, 3500, 25, NA }, + { "ldo2", 0x12, BIT(2), 0x28, 0xf0, 1800, 3300, 100, NA }, + { "ldo3", 0x12, BIT(6), 0x29, 0x7f, 700, 2275, 25, NA }, + { "ldo4", 0x12, BIT(3), 0x28, 0x0f, .table = axp20x_ldo4_table }, + { } +}; + +static const struct axp_regulator_plat axp22x_regulators[] = { + {"dc5ldo", 0x10, BIT(0), 0x1c, 0x07, 700, 1400, 100, NA }, + { "dcdc1", 0x10, BIT(1), 0x21, 0x1f, 1600, 3400, 100, NA }, + { "dcdc2", 0x10, BIT(2), 0x22, 0x3f, 600, 1540, 20, NA }, + { "dcdc3", 0x10, BIT(3), 0x23, 0x3f, 600, 1860, 20, NA }, + { "dcdc4", 0x10, BIT(4), 0x24, 0x3f, 600, 1540, 20, NA }, + { "dcdc5", 0x10, BIT(5), 0x25, 0x1f, 1000, 2550, 50, NA }, + { "aldo1", 0x10, BIT(6), 0x28, 0x1f, 700, 3300, 100, NA }, + { "aldo2", 0x10, BIT(7), 0x29, 0x1f, 700, 3300, 100, NA }, + { "aldo3", 0x13, BIT(7), 0x2a, 0x1f, 700, 3300, 100, NA }, + { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, + { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 3300, 100, NA }, + { "dldo3", 0x12, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, + { "dldo4", 0x12, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, + { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 3300, 100, NA }, + { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 3300, 100, NA }, + { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 3300, 100, NA }, + { "dc1sw", 0x12, BIT(7), NA, NA, NA, NA, NA, NA }, + { } +}; + +static const struct axp_regulator_plat axp803_regulators[] = { + { "dcdc1", 0x10, BIT(0), 0x20, 0x1f, 1600, 3400, 100, NA }, + { "dcdc2", 0x10, BIT(1), 0x21, 0x7f, 500, 1300, 10, 70 }, + { "dcdc3", 0x10, BIT(2), 0x22, 0x7f, 500, 1300, 10, 70 }, + { "dcdc4", 0x10, BIT(3), 0x23, 0x7f, 500, 1300, 10, 70 }, + { "dcdc5", 0x10, BIT(4), 0x24, 0x7f, 800, 1840, 10, 32 }, + { "dcdc6", 0x10, BIT(5), 0x25, 0x7f, 600, 1520, 10, 50 }, + { "aldo1", 0x13, BIT(5), 0x28, 0x1f, 700, 3300, 100, NA }, + { "aldo2", 0x13, BIT(6), 0x29, 0x1f, 700, 3300, 100, NA }, + { "aldo3", 0x13, BIT(7), 0x2a, 0x1f, 700, 3300, 100, NA }, + { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, + { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 4200, 100, 27 }, + { "dldo3", 0x12, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, + { "dldo4", 0x12, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, + { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 1900, 50, NA }, + { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 1900, 50, NA }, + { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 1900, 50, NA }, + { "fldo1", 0x13, BIT(2), 0x1c, 0x0f, 700, 1450, 50, NA }, + { "fldo2", 0x13, BIT(3), 0x1d, 0x0f, 700, 1450, 50, NA }, + { "dc1sw", 0x12, BIT(7), NA, NA, NA, NA, NA, NA }, + { } +}; + +/* + * The "dcdcd" split changes the step size by a factor of 5, not 2; + * disallow values above the split to maintain accuracy. + */ +static const struct axp_regulator_plat axp806_regulators[] = { + { "dcdca", 0x10, BIT(0), 0x12, 0x7f, 600, 1520, 10, 50 }, + { "dcdcb", 0x10, BIT(1), 0x13, 0x1f, 1000, 2550, 50, NA }, + { "dcdcc", 0x10, BIT(2), 0x14, 0x7f, 600, 1520, 10, 50 }, + { "dcdcd", 0x10, BIT(3), 0x15, 0x3f, 600, 1500, 20, NA }, + { "dcdce", 0x10, BIT(4), 0x16, 0x1f, 1100, 3400, 100, NA }, + { "aldo1", 0x10, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, + { "aldo2", 0x10, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, + { "aldo3", 0x10, BIT(7), 0x19, 0x1f, 700, 3300, 100, NA }, + { "bldo1", 0x11, BIT(0), 0x20, 0x0f, 700, 1900, 100, NA }, + { "bldo2", 0x11, BIT(1), 0x21, 0x0f, 700, 1900, 100, NA }, + { "bldo3", 0x11, BIT(2), 0x22, 0x0f, 700, 1900, 100, NA }, + { "bldo4", 0x11, BIT(3), 0x23, 0x0f, 700, 1900, 100, NA }, + { "cldo1", 0x11, BIT(4), 0x24, 0x1f, 700, 3300, 100, NA }, + { "cldo2", 0x11, BIT(5), 0x25, 0x1f, 700, 4200, 100, 27 }, + { "cldo3", 0x11, BIT(6), 0x26, 0x1f, 700, 3300, 100, NA }, + { "sw", 0x11, BIT(7), NA, NA, NA, NA, NA, NA }, + { } +}; + +/* + * The "dcdc4" split changes the step size by a factor of 5, not 2; + * disallow values above the split to maintain accuracy. + */ +static const struct axp_regulator_plat axp809_regulators[] = { + {"dc5ldo", 0x10, BIT(0), 0x1c, 0x07, 700, 1400, 100, NA }, + { "dcdc1", 0x10, BIT(1), 0x21, 0x1f, 1600, 3400, 100, NA }, + { "dcdc2", 0x10, BIT(2), 0x22, 0x3f, 600, 1540, 20, NA }, + { "dcdc3", 0x10, BIT(3), 0x23, 0x3f, 600, 1860, 20, NA }, + { "dcdc4", 0x10, BIT(4), 0x24, 0x3f, 600, 1540, 20, NA }, + { "dcdc5", 0x10, BIT(5), 0x25, 0x1f, 1000, 2550, 50, NA }, + { "aldo1", 0x10, BIT(6), 0x28, 0x1f, 700, 3300, 100, NA }, + { "aldo2", 0x10, BIT(7), 0x29, 0x1f, 700, 3300, 100, NA }, + { "aldo3", 0x12, BIT(5), 0x2a, 0x1f, 700, 3300, 100, NA }, + { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, + { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 3300, 100, NA }, + { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 3300, 100, NA }, + { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 3300, 100, NA }, + { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 3300, 100, NA }, + { "sw", 0x12, BIT(6), NA, NA, NA, NA, NA, NA }, + { "dc1sw", 0x12, BIT(7), NA, NA, NA, NA, NA, NA }, + { } +}; + +static const struct axp_regulator_plat axp813_regulators[] = { + { "dcdc1", 0x10, BIT(0), 0x20, 0x1f, 1600, 3400, 100, NA }, + { "dcdc2", 0x10, BIT(1), 0x21, 0x7f, 500, 1300, 10, 70 }, + { "dcdc3", 0x10, BIT(2), 0x22, 0x7f, 500, 1300, 10, 70 }, + { "dcdc4", 0x10, BIT(3), 0x23, 0x7f, 500, 1300, 10, 70 }, + { "dcdc5", 0x10, BIT(4), 0x24, 0x7f, 800, 1840, 10, 32 }, + { "dcdc6", 0x10, BIT(5), 0x25, 0x7f, 600, 1520, 10, 50 }, + { "dcdc7", 0x10, BIT(6), 0x26, 0x7f, 600, 1520, 10, 50 }, + { "aldo1", 0x13, BIT(5), 0x28, 0x1f, 700, 3300, 100, NA }, + { "aldo2", 0x13, BIT(6), 0x29, 0x1f, 700, 3300, 100, NA }, + { "aldo3", 0x13, BIT(7), 0x2a, 0x1f, 700, 3300, 100, NA }, + { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, + { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 4200, 100, 27 }, + { "dldo3", 0x12, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, + { "dldo4", 0x12, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, + { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 1900, 50, NA }, + { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 1900, 50, NA }, + { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 1900, 50, NA }, + { "fldo1", 0x13, BIT(2), 0x1c, 0x0f, 700, 1450, 50, NA }, + { "fldo2", 0x13, BIT(3), 0x1d, 0x0f, 700, 1450, 50, NA }, + { "fldo3", 0x13, BIT(4), NA, NA, NA, NA, NA, NA }, + { } +}; + +static const struct axp_regulator_plat *const axp_regulators[] = { + [AXP152_ID] = axp152_regulators, + [AXP202_ID] = axp20x_regulators, + [AXP209_ID] = axp20x_regulators, + [AXP221_ID] = axp22x_regulators, + [AXP223_ID] = axp22x_regulators, + [AXP803_ID] = axp803_regulators, + [AXP806_ID] = axp806_regulators, + [AXP809_ID] = axp809_regulators, + [AXP813_ID] = axp813_regulators, +}; + +static int axp_regulator_bind(struct udevice *dev) +{ + struct dm_regulator_uclass_plat *uc_plat = dev_get_uclass_plat(dev); + ulong id = dev_get_driver_data(dev->parent); + const struct axp_regulator_plat *plat; + + for (plat = axp_regulators[id]; plat && plat->name; plat++) + if (!strcmp(plat->name, dev->name)) + break; + if (!plat || !plat->name) + return -ENODEV; + + dev_set_plat(dev, (void *)plat); + + if (plat->volt_reg == NA) + uc_plat->type = REGULATOR_TYPE_FIXED; + else if (!strncmp(plat->name, "dcdc", strlen("dcdc"))) + uc_plat->type = REGULATOR_TYPE_BUCK; + else + uc_plat->type = REGULATOR_TYPE_LDO; + + return 0; +} + +U_BOOT_DRIVER(axp_regulator) = { + .name = "axp_regulator", + .id = UCLASS_REGULATOR, + .bind = axp_regulator_bind, + .ops = &axp_regulator_ops, +}; diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c index 19ed80b48a..4f5d098928 100644 --- a/drivers/video/sunxi/sunxi_dw_hdmi.c +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c @@ -56,10 +56,10 @@ static int sunxi_dw_hdmi_get_divider(uint clock) return 1; } -static void sunxi_dw_hdmi_phy_init(void) +static void sunxi_dw_hdmi_phy_init(struct dw_hdmi *hdmi) { struct sunxi_hdmi_phy * const phy = - (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); + (struct sunxi_hdmi_phy *)(hdmi->ioaddr + HDMI_PHY_OFFS); unsigned long tmo; u32 tmp; @@ -113,10 +113,10 @@ static void sunxi_dw_hdmi_phy_init(void) writel(0x42494E47, &phy->unscramble); } -static void sunxi_dw_hdmi_phy_set(uint clock, int phy_div) +static void sunxi_dw_hdmi_phy_set(struct dw_hdmi *hdmi, uint clock, int phy_div) { struct sunxi_hdmi_phy * const phy = - (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); + (struct sunxi_hdmi_phy *)(hdmi->ioaddr + HDMI_PHY_OFFS); int div = sunxi_dw_hdmi_get_divider(clock); u32 tmp; @@ -270,7 +270,7 @@ static int sunxi_dw_hdmi_phy_cfg(struct dw_hdmi *hdmi, uint mpixelclock) int phy_div; sunxi_dw_hdmi_pll_set(mpixelclock / 1000, &phy_div); - sunxi_dw_hdmi_phy_set(mpixelclock, phy_div); + sunxi_dw_hdmi_phy_set(hdmi, mpixelclock, phy_div); return 0; } @@ -291,10 +291,10 @@ static bool sunxi_dw_hdmi_mode_valid(struct udevice *dev, static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp, const struct display_timing *edid) { + struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); struct sunxi_hdmi_phy * const phy = - (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); + (struct sunxi_hdmi_phy *)(priv->hdmi.ioaddr + HDMI_PHY_OFFS); struct display_plat *uc_plat = dev_get_uclass_plat(dev); - struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); int ret; ret = dw_hdmi_enable(&priv->hdmi, edid); @@ -316,7 +316,7 @@ static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp, * again or othwerwise BSP driver won't work. Dummy read is * needed or otherwise last write doesn't get written correctly. */ - (void)readb(SUNXI_HDMI_BASE); + (void)readb(priv->hdmi.ioaddr); writel(0, &phy->unscramble); return 0; @@ -345,13 +345,7 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev) /* Clock on */ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); - sunxi_dw_hdmi_phy_init(); - - priv->hdmi.ioaddr = SUNXI_HDMI_BASE; - priv->hdmi.i2c_clk_high = 0xd8; - priv->hdmi.i2c_clk_low = 0xfe; - priv->hdmi.reg_io_width = 1; - priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg; + sunxi_dw_hdmi_phy_init(&priv->hdmi); ret = dw_hdmi_phy_wait_for_hpd(&priv->hdmi); if (ret < 0) { @@ -364,20 +358,37 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev) return 0; } +static int sunxi_dw_hdmi_of_to_plat(struct udevice *dev) +{ + struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); + struct dw_hdmi *hdmi = &priv->hdmi; + + hdmi->ioaddr = (ulong)dev_read_addr(dev); + hdmi->i2c_clk_high = 0xd8; + hdmi->i2c_clk_low = 0xfe; + hdmi->reg_io_width = 1; + hdmi->phy_set = sunxi_dw_hdmi_phy_cfg; + + return 0; +} + static const struct dm_display_ops sunxi_dw_hdmi_ops = { .read_edid = sunxi_dw_hdmi_read_edid, .enable = sunxi_dw_hdmi_enable, .mode_valid = sunxi_dw_hdmi_mode_valid, }; -U_BOOT_DRIVER(sunxi_dw_hdmi) = { - .name = "sunxi_dw_hdmi", - .id = UCLASS_DISPLAY, - .ops = &sunxi_dw_hdmi_ops, - .probe = sunxi_dw_hdmi_probe, - .priv_auto = sizeof(struct sunxi_dw_hdmi_priv), +static const struct udevice_id sunxi_dw_hdmi_ids[] = { + { .compatible = "allwinner,sun8i-a83t-dw-hdmi" }, + { } }; -U_BOOT_DRVINFO(sunxi_dw_hdmi) = { - .name = "sunxi_dw_hdmi" +U_BOOT_DRIVER(sunxi_dw_hdmi) = { + .name = "sunxi_dw_hdmi", + .id = UCLASS_DISPLAY, + .of_match = sunxi_dw_hdmi_ids, + .probe = sunxi_dw_hdmi_probe, + .of_to_plat = sunxi_dw_hdmi_of_to_plat, + .priv_auto = sizeof(struct sunxi_dw_hdmi_priv), + .ops = &sunxi_dw_hdmi_ops, }; diff --git a/include/axp_pmic.h b/include/axp_pmic.h index 01ebba6347..4ac6486583 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -26,6 +26,18 @@ #define AXP_PMIC_SEC_DEVICE_ADDR 0x745 #define AXP_PMIC_SEC_RUNTIME_ADDR 0x3a +enum { + AXP152_ID, + AXP202_ID, + AXP209_ID, + AXP221_ID, + AXP223_ID, + AXP803_ID, + AXP806_ID, + AXP809_ID, + AXP813_ID, +}; + int axp_set_dcdc1(unsigned int mvolt); int axp_set_dcdc2(unsigned int mvolt); int axp_set_dcdc3(unsigned int mvolt); diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 8032abe769..d2d70f0fc2 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -88,7 +88,7 @@ #endif /* !CONFIG_ARM64 */ #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 #ifdef CONFIG_MACH_SUN50I_H616 -#define LOW_LEVEL_SRAM_STACK 0x58000 +#define LOW_LEVEL_SRAM_STACK 0x52a00 /* below FEL buffers */ #else /* end of SRAM A2 on H6 for now */ #define LOW_LEVEL_SRAM_STACK 0x00118000 |