Merge tag 'u-boot-stm32-20230816' of https://source.denx.de/u-boot/custodians/u-boot-stm

DHSOM: Power cycle Buck3 in reset
DHCOM: Switch DWMAC RMII clock to MCO2
stm32f746: fix display pinmux
stm32mp: psci: Inhibit PDDS because CSTBYDIS is set
stm32mp1: DT alignment with v6.4
stm32mp1: add splashscreen with STMicroelectronics logo
stm32mp1: clk: remove error for disabled clock in stm32mp1_clk_get_parent
serial: stm32: Extend TC timeout

25 files changed, 375 insertions, 80 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index bf851cffd6..523c17ebae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -633,6 +633,7 @@ F:	include/dt-bindings/clock/stm32mp*
 F:	include/dt-bindings/pinctrl/stm32-pinfunc.h
 F:	include/dt-bindings/reset/stm32mp*
 F:	include/stm32_rcc.h
+F:	tools/logos/st.bmp
 F:	tools/stm32image.c
 N:	stm
 N:	stm32
diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
index 19b5451db4..522cffb1ac 100644
--- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -169,7 +169,7 @@
 	ltdc_pins: ltdc@0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 4, AF14)>, /* B0 */
-				 <STM32_PINMUX('G',12, AF14)>, /* B4 */
+				 <STM32_PINMUX('G',12, AF9)>,  /* B4 */
 				 <STM32_PINMUX('I', 9, AF14)>, /* VSYNC */
 				 <STM32_PINMUX('I',10, AF14)>, /* HSYNC */
 				 <STM32_PINMUX('I',14, AF14)>, /* CLK */
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index b2dce3a29f..27e0c38267 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -258,4 +258,133 @@
 			bias-disable;
 		};
 	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_idle_pins_a: uart8-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_sleep_pins_a: uart8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
+				 <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+				 <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */
+				 <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
 };
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index d94ba25472..d163c267e3 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -397,12 +397,42 @@
 			status = "disabled";
 		};
 
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x5>,
+			       <&dmamux1 46 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
 			resets = <&rcc UART4_R>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x5>,
+			       <&dmamux1 64 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x5>,
+			       <&dmamux1 66 0x400 0x1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -442,6 +472,32 @@
 			status = "disabled";
 		};
 
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x5>,
+			       <&dmamux1 80 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x5>,
+			       <&dmamux1 82 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timers1: timer@44000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -524,6 +580,19 @@
 			};
 		};
 
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x5>,
+			       <&dmamux1 72 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s1: audio-controller@44004000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@
 			status = "disabled";
 		};
 
+		usart1: serial@4c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c000000 0x400>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			wakeup-source;
+			dmas = <&dmamux1 41 0x400 0x5>,
+			       <&dmamux1 42 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usart2: serial@4c001000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c001000 0x400>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
+			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x5>,
+			       <&dmamux1 44 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s4: audio-controller@4c002000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x4c002000 0x400>;
@@ -1001,8 +1096,6 @@
 			reg = <0x50000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-
 			clock-names = "hse", "hsi", "csi", "lse", "lsi";
 			clocks = <&scmi_clk CK_SCMI_HSE>,
 				 <&scmi_clk CK_SCMI_HSI>,
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index c40686cb2b..f0900ca672 100644
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -19,6 +19,13 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart1;
+		serial2 = &uart8;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
@@ -267,8 +274,41 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-1 = <&uart8_sleep_pins_a>;
+	pinctrl-2 = <&uart8_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	pinctrl-2 = <&usart2_idle_pins_a>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index a9d2bec990..e86d989dd3 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2163,7 +2178,7 @@
 				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
@@ -2181,7 +2196,7 @@
 			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
@@ -2448,19 +2463,4 @@
 			bias-disable;
 		};
 	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index b3baacbb26..21d11be328 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1148,8 +1148,8 @@
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
+			clocks = <&rcc USBO_K>, <&usbphyc>;
+			clock-names = "otg", "utmi";
 			resets = <&rcc USBO_R>;
 			reset-names = "dwc2";
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index 4c8be9c8eb..0da3667ab1 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -17,9 +17,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index 2bc92ef3ae..ab13e340f4 100644
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -18,9 +18,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 		serial3 = &usart2;
 	};
 
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index fe5c8f25ce..3541a17dce 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -16,6 +16,10 @@
 	model = "STMicroelectronics STM32MP157C eval daughter";
 	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
 
+	aliases {
+		serial0 = &uart4;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -65,15 +69,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@e8000000 {
-			reg = <0xe8000000 0x8000000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
 	};
 
 	sd_switch: regulator-sd_switch {
@@ -148,10 +143,6 @@
 	status = "okay";
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index 542226cfcf..ba8e9d9a42 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -14,16 +14,15 @@
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	aliases {
-		serial0 = &uart4;
 		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		clk_ext_camera: clk-ext-camera {
 			#clock-cells = <0>;
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
index de761743b2..d3b85a8764 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
@@ -118,13 +118,12 @@
 
 &ethernet0 {
 	status = "okay";
-	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-0 = <&ethernet0_rmii_pins_c &mco2_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rmii";
 	max-speed = <100>;
 	phy-handle = <&phy0>;
-	st,eth-ref-clk-sel;
 
 	mdio0 {
 		#address-cells = <1>;
@@ -136,7 +135,7 @@
 			/* LAN8710Ai */
 			compatible = "ethernet-phy-id0007.c0f0",
 				     "ethernet-phy-ieee802.3-c22";
-			clocks = <&rcc ETHCK_K>;
+			clocks = <&rcc CK_MCO2>;
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
@@ -450,6 +449,21 @@
 	};
 };
 
+&rcc {
+	/* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */
+	clocks = <&rcc CK_MCO2>;
+	clock-names = "ETH_RX_CLK/ETH_REF_CLK";
+
+	/*
+	 * Set PLL4P output to 100 MHz to supply SDMMC with faster clock,
+	 * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2,
+	 * so that MCO2 behaves as a divider for the ETHRX clock here.
+	 */
+	assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <50000000>, <100000000>;
+};
+
 &rng1 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index a808620e12..f12941b05f 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -153,6 +153,20 @@
 };
 
 &rcc {
+	/*
+	 * Reinstate clock names from stm32mp151.dtsi, the MCO2 trick
+	 * used in stm32mp15xx-dhcom-som.dtsi is not supported by the
+	 * U-Boot clock framework.
+	 */
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+		 <&clk_lse>, <&clk_lsi>;
+
+	/* The MCO2 is already configured correctly, remove those. */
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+
 	st,clksrc = <
 		CLK_MPU_PLL1P
 		CLK_AXI_PLL2P
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 49b3e768c8..f4de6c0b75 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -8,6 +8,12 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x20000000>;
@@ -53,11 +59,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -159,10 +160,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/mach-stm32mp/psci.c b/arch/arm/mach-stm32mp/psci.c
index 39b5200949..8cdeb0ab3f 100644
--- a/arch/arm/mach-stm32mp/psci.c
+++ b/arch/arm/mach-stm32mp/psci.c
@@ -729,7 +729,7 @@ void __secure psci_system_suspend(u32 __always_unused function_id,
 	setbits_le32(STM32_RCC_BASE + RCC_MP_CIER, RCC_MP_CIFR_WKUPF);
 
 	setbits_le32(STM32_PWR_BASE + PWR_MPUCR,
-		     PWR_MPUCR_CSSF | PWR_MPUCR_CSTDBYDIS | PWR_MPUCR_PDDS);
+		     PWR_MPUCR_CSSF | PWR_MPUCR_CSTDBYDIS);
 
 	saved_mcudivr = readl(STM32_RCC_BASE + RCC_MCUDIVR);
 	saved_pll3cr = readl(STM32_RCC_BASE + RCC_PLL3CR);
diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c
index d52dce4f65..969ad48486 100644
--- a/board/st/common/stpmic1.c
+++ b/board/st/common/stpmic1.c
@@ -185,21 +185,17 @@ static int stmpic_buck1_set(struct udevice *dev, u32 voltage_mv)
 }
 
 /* early init of PMIC */
-void stpmic1_init(u32 voltage_mv)
+struct udevice *stpmic1_init(u32 voltage_mv)
 {
 	struct udevice *dev;
 
 	if (uclass_get_device_by_driver(UCLASS_PMIC,
 					DM_DRIVER_GET(pmic_stpmic1), &dev))
-		return;
+		return NULL;
 
 	/* update VDDCORE = BUCK1 */
 	if (voltage_mv)
 		stmpic_buck1_set(dev, voltage_mv);
 
-	/* Keep vdd on during the reset cycle */
-	pmic_clrsetbits(dev,
-			STPMIC1_BUCKS_MRST_CR,
-			STPMIC1_MRST_BUCK(STPMIC1_BUCK3),
-			STPMIC1_MRST_BUCK(STPMIC1_BUCK3));
+	return dev;
 }
diff --git a/board/st/common/stpmic1.h b/board/st/common/stpmic1.h
index b17d6f1633..7a7169d7ce 100644
--- a/board/st/common/stpmic1.h
+++ b/board/st/common/stpmic1.h
@@ -3,4 +3,4 @@
  * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
  */
 
-void stpmic1_init(u32 voltage_mv);
+struct udevice *stpmic1_init(u32 voltage_mv);
diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c
index 747ec7e445..8b4a529f75 100644
--- a/board/st/stm32mp1/spl.c
+++ b/board/st/stm32mp1/spl.c
@@ -5,6 +5,8 @@
 
 #include <config.h>
 #include <common.h>
+#include <power/pmic.h>
+#include <power/stpmic1.h>
 #include <asm/arch/sys_proto.h>
 #include "../common/stpmic1.h"
 
@@ -19,8 +21,15 @@ void board_vddcore_init(u32 voltage_mv)
 
 int board_early_init_f(void)
 {
-	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER))
-		stpmic1_init(opp_voltage_mv);
+	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER)) {
+		struct udevice *dev = stpmic1_init(opp_voltage_mv);
+
+		/* Keep vdd on during the reset cycle */
+		pmic_clrsetbits(dev,
+				STPMIC1_BUCKS_MRST_CR,
+				STPMIC1_MRST_BUCK(STPMIC1_BUCK3),
+				STPMIC1_MRST_BUCK(STPMIC1_BUCK3));
+	}
 
 	return 0;
 }
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 424ae5dbdf..9ea5aaa714 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -171,6 +171,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_VIDEO=y
+CONFIG_VIDEO_LOGO=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
 CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
@@ -178,6 +179,8 @@ CONFIG_VIDEO_STM32=y
 CONFIG_VIDEO_STM32_DSI=y
 CONFIG_VIDEO_STM32_MAX_XRES=1280
 CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
index 2700b5c499..4d0a81f8a8 100644
--- a/configs/stm32mp15_defconfig
+++ b/configs/stm32mp15_defconfig
@@ -147,6 +147,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_VIDEO=y
+CONFIG_VIDEO_LOGO=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
 CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
@@ -154,6 +155,8 @@ CONFIG_VIDEO_STM32=y
 CONFIG_VIDEO_STM32_DSI=y
 CONFIG_VIDEO_STM32_MAX_XRES=1280
 CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 5b94e0c6d2..0a7d862485 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -147,6 +147,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_VIDEO=y
+CONFIG_VIDEO_LOGO=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
 CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
@@ -154,6 +155,8 @@ CONFIG_VIDEO_STM32=y
 CONFIG_VIDEO_STM32_DSI=y
 CONFIG_VIDEO_STM32_MAX_XRES=1280
 CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c
index 4f4524fcb2..6150287694 100644
--- a/drivers/clk/stm32/clk-stm32mp1.c
+++ b/drivers/clk/stm32/clk-stm32mp1.c
@@ -881,7 +881,8 @@ static int stm32mp1_clk_get_parent(struct stm32mp1_clk_priv *priv,
 		return sel[s].parent[p];
 	}
 
-	log_err("no parents defined for clk id %d\n", (u32)id);
+	/* clock is DISABLED when the clock src is not in clk_parent[] range */
+	log_debug("no parents defined for clk id %d\n", (u32)id);
 
 	return -EINVAL;
 }
diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index 0085113f67..23d476fba2 100644
--- a/drivers/serial/serial_stm32.c
+++ b/drivers/serial/serial_stm32.c
@@ -22,6 +22,14 @@
 #include "serial_stm32.h"
 #include <dm/device_compat.h>
 
+/*
+ * At 115200 bits/s
+ * 1 bit = 1 / 115200 = 8,68 us
+ * 8 bits = 69,444 us
+ * 10 bits are needed for worst case (8 bits + 1 start + 1 stop) = 86.806 us
+ */
+#define ONE_BYTE_B115200_US		87
+
 static void _stm32_serial_setbrg(fdt_addr_t base,
 				 struct stm32_uart_info *uart_info,
 				 u32 clock_rate,
@@ -209,12 +217,10 @@ static int stm32_serial_probe(struct udevice *dev)
 	 * before uart initialization, wait for TC bit (Transmission Complete)
 	 * in case there is still chars from previous bootstage to transmit
 	 */
-	ret = read_poll_timeout(readl, isr, isr & USART_ISR_TC, 10, 150,
-				plat->base + ISR_OFFSET(stm32f4));
-	if (ret) {
-		clk_disable(&clk);
-		return ret;
-	}
+	ret = read_poll_timeout(readl, isr, isr & USART_ISR_TC, 50,
+				16 * ONE_BYTE_B115200_US, plat->base + ISR_OFFSET(stm32f4));
+	if (ret)
+		dev_dbg(dev, "FIFO not empty, some character can be lost (%d)\n", ret);
 
 	ret = reset_get_by_index(dev, 0, &reset);
 	if (!ret) {
diff --git a/include/configs/stm32mp15_st_common.h b/include/configs/stm32mp15_st_common.h
index b45982a35b..60838cb0e3 100644
--- a/include/configs/stm32mp15_st_common.h
+++ b/include/configs/stm32mp15_st_common.h
@@ -10,7 +10,9 @@
 
 #define STM32MP_BOARD_EXTRA_ENV \
 	"usb_pgood_delay=2000\0" \
-	"console=ttySTM0\0"
+	"console=ttySTM0\0" \
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"splashpos=m,m\0"
 
 #include <configs/stm32mp15_common.h>
 
diff --git a/tools/logos/st.bmp b/tools/logos/st.bmp
new file mode 100644
index 0000000000..f59d3c5cef
--- /dev/null
+++ b/tools/logos/st.bmp