Merge branch 'master' of git://git.denx.de/u-boot-coldfire

21 files changed, 747 insertions, 184 deletions

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 26509b73c6..42fb91539a 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -200,6 +200,10 @@ config TARGET_AMCORE
 	bool "Support AMCORE"
 	select M5307
 
+config TARGET_STMARK2
+        bool "Support stmark2"
+        select M54418
+
 endchoice
 
 source "board/BuS/eb_cpu5282/Kconfig"
@@ -223,5 +227,6 @@ source "board/freescale/m54455evb/Kconfig"
 source "board/freescale/m547xevb/Kconfig"
 source "board/freescale/m548xevb/Kconfig"
 source "board/sysam/amcore/Kconfig"
+source "board/sysam/stmark2/Kconfig"
 
 endmenu
diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c
index b4a8eefa94..5d2b116be1 100644
--- a/arch/m68k/cpu/mcf5445x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5445x/cpu_init.c
@@ -205,6 +205,7 @@ void cpu_init_f(void)
 	/* FlexBus Chipselect */
 	init_fbcs();
 
+#ifdef CONFIG_SYS_CS0_BASE
 	/*
 	 * now the flash base address is no longer at 0 (Newer ColdFire family
 	 * boot at address 0 instead of 0xFFnn_nnnn). The vector table must
@@ -212,6 +213,7 @@ void cpu_init_f(void)
 	 */
 	if (CONFIG_SYS_CS0_BASE != 0)
 		setvbr(CONFIG_SYS_CS0_BASE);
+#endif
 
 	icache_enable();
 }
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index 0487d84a2f..4c09489bcb 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -159,6 +159,7 @@ asm_dram_init:
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l	%sp@-
 
+#ifdef CONFIG_SYS_CS0_BASE
 	/* Must disable global address */
 	move.l	#0xFC008000, %a1
 	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
@@ -166,6 +167,7 @@ asm_dram_init:
 	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
 	move.l	#0xFC008004, %a1
 	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+#endif
 #endif /* CONFIG_CF_SBF */
 
 #ifdef CONFIG_MCF5441x
@@ -176,177 +178,12 @@ asm_dram_init:
 #if defined(CONFIG_CF_SBF)
 	move.b	#23, (%a1)		/* dspi */
 #endif
-	move.b	#46, (%a1)		/* DDR */
-
-	/* slew settings */
-	move.l	#0xEC094060, %a1
-	move.b	#0, (%a1)
-
-	/* use vco instead of cpu*2 clock for ddr clock */
-	move.l	#0xEC09001A, %a1
-	move.w	#0xE01D, (%a1)
-
-	/* DDR settings */
-	move.l	#0xFC0B8180, %a1
-	move.l	#0x00000000, (%a1)
-	move.l	#0x40000000, (%a1)
-
-	move.l	#0xFC0B81AC, %a1
-	move.l	#0x01030203, (%a1)
-
-	move.l	#0xFC0B8000, %a1
-	move.l	#0x01010101, (%a1)+	/* 0x00 */
-	move.l	#0x00000101, (%a1)+	/* 0x04 */
-	move.l	#0x01010100, (%a1)+	/* 0x08 */
-	move.l	#0x01010000, (%a1)+	/* 0x0C */
-	move.l	#0x00010101, (%a1)+	/* 0x10 */
-	move.l	#0xFC0B8018, %a1
-	move.l	#0x00010100, (%a1)+	/* 0x18 */
-	move.l	#0x00000001, (%a1)+	/* 0x1C */
-	move.l	#0x01000001, (%a1)+	/* 0x20 */
-	move.l	#0x00000100, (%a1)+	/* 0x24 */
-	move.l	#0x00010001, (%a1)+	/* 0x28 */
-	move.l	#0x00000200, (%a1)+	/* 0x2C */
-	move.l	#0x01000002, (%a1)+	/* 0x30 */
-	move.l	#0x00000000, (%a1)+	/* 0x34 */
-	move.l	#0x00000100, (%a1)+	/* 0x38 */
-	move.l	#0x02000100, (%a1)+	/* 0x3C */
-	move.l	#0x02000407, (%a1)+	/* 0x40 */
-	move.l	#0x02030007, (%a1)+	/* 0x44 */
-	move.l	#0x02000100, (%a1)+	/* 0x48 */
-	move.l	#0x0A030203, (%a1)+	/* 0x4C */
-	move.l	#0x00020708, (%a1)+	/* 0x50 */
-	move.l	#0x00050008, (%a1)+	/* 0x54 */
-	move.l	#0x04030002, (%a1)+	/* 0x58 */
-	move.l	#0x00000004, (%a1)+	/* 0x5C */
-	move.l	#0x020A0000, (%a1)+	/* 0x60 */
-	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
-	move.l	#0x00002004, (%a1)+	/* 0x68 */
-	move.l	#0x00000000, (%a1)+	/* 0x6C */
-	move.l	#0x00100010, (%a1)+	/* 0x70 */
-	move.l	#0x00100010, (%a1)+	/* 0x74 */
-	move.l	#0x00000000, (%a1)+	/* 0x78 */
-	move.l	#0x07990000, (%a1)+	/* 0x7C */
-	move.l	#0xFC0B80A0, %a1
-	move.l	#0x00000000, (%a1)+	/* 0xA0 */
-	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
-	move.l	#0x44520002, (%a1)+	/* 0xA8 */
-	move.l	#0x00C80023, (%a1)+	/* 0xAC */
-	move.l	#0xFC0B80B4, %a1
-	move.l	#0x0000C350, (%a1)	/* 0xB4 */
-	move.l	#0xFC0B80E0, %a1
-	move.l	#0x04000000, (%a1)+	/* 0xE0 */
-	move.l	#0x03000304, (%a1)+	/* 0xE4 */
-	move.l	#0x40040000, (%a1)+	/* 0xE8 */
-	move.l	#0xC0004004, (%a1)+	/* 0xEC */
-	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
-	move.l	#0x00000642, (%a1)+	/* 0xF4 */
-	move.l	#0xFC0B8024, %a1
-	tpf
-	move.l	#0x01000100, (%a1)	/* 0x24 */
-
-	move.l	#0x2000, %d1
-	jsr	asm_delay
-#endif		/* CONFIG_MCF5441x */
-
-#ifdef CONFIG_MCF5445x
-	/* Dram Initialization a1, a2, and d0 */
-	/* mscr sdram */
-	move.l	#0xFC0A4074, %a1
-	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
-	nop
-
-	/* SDRAM Chip 0 and 1 */
-	move.l	#0xFC0B8110, %a1
-	move.l	#0xFC0B8114, %a2
-
-	/* calculate the size */
-	move.l	#0x13, %d1
-	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	lsr.l	#1, %d2
-#endif
-
-dramsz_loop:
-	lsr.l	#1, %d2
-	add.l	#1, %d1
-	cmp.l	#1, %d2
-	bne	dramsz_loop
-#ifdef CONFIG_SYS_NAND_BOOT
-	beq	asm_nand_chk_status
-#endif
-	/* SDRAM Chip 0 and 1 */
-	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
-	or.l	%d1, (%a1)
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
-	or.l	%d1, (%a2)
-#endif
-	nop
+#endif	/* CONFIG_MCF5441x */
 
-	/* dram cfg1 and cfg2 */
-	move.l	#0xFC0B8008, %a1
-	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
-	nop
-	move.l	#0xFC0B800C, %a2
-	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
-	nop
-
-	move.l	#0xFC0B8000, %a1	/* Mode */
-	move.l	#0xFC0B8004, %a2	/* Ctrl */
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-#ifdef CONFIG_M54455EVB
-	/* Issue LEMR */
-	move.l	#(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
-	nop
-	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
-	nop
-#endif
-
-	move.l	#1000, %d1
-	jsr	asm_delay
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-	/* Perform two refresh cycles */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
-	nop
-	move.l	%d0, (%a2)
-	move.l	%d0, (%a2)
-	nop
-
-#ifdef CONFIG_M54455EVB
-	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1)
-	nop
-#elif defined(CONFIG_M54451EVB)
-	/* Issue LEMR */
-	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
-	nop
-	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
-#endif
-
-	move.l	#500, %d1
-	jsr	asm_delay
-
-	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
-	and.l	#0x7FFFFFFF, %d1
-#ifdef CONFIG_M54455EVB
-	or.l	#0x10000C00, %d1
-#elif defined(CONFIG_M54451EVB)
-	or.l	#0x10000C00, %d1
-#endif
-	move.l	%d1, (%a2)
-	nop
-
-	move.l	#2000, %d1
-	jsr	asm_delay
-#endif /* CONFIG_MCF5445x */
+	/* mandatory board level ddr-sdram init,
+	 * for both 5441x and 5445x
+	 */
+	bsr	sbf_dram_init
 
 #ifdef CONFIG_CF_SBF
 	/*
@@ -507,6 +344,7 @@ asm_nand_init:
 	movec	%d0, %ACR2
 	movec	%d0, %ACR3
 
+#ifdef CONFIG_SYS_CS0_BASE
 	/* Must disable global address */
 	move.l	#0xFC008000, %a1
 	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
@@ -514,6 +352,7 @@ asm_nand_init:
 	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
 	move.l	#0xFC008004, %a1
 	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+#endif
 
 	/* NAND port configuration */
 	move.l	#0xEC094048, %a1
@@ -537,7 +376,7 @@ asm_nand_init:
 	move.l  #0x000e0000, (%a1)
 
 	move.l	#0x2000, %d1
-	jsr	asm_delay
+	bsr	asm_delay
 
 	/* setup nand */
 	move.l  #0xFC0FFF00, %a1
@@ -565,7 +404,7 @@ asm_nand_read:
 	move.l	%d0, (%a0)
 
 	move.l	#0x200, %d1
-	jsr	asm_delay
+	bsr	asm_delay
 
 asm_nand_chk_status:
 	move.l  #0xFC0FFF38, %a4	/* isr */
@@ -595,6 +434,7 @@ asm_nand_copy:
 
 #endif			/* CONFIG_SYS_NAND_BOOT */
 
+.globl asm_delay
 asm_delay:
 	nop
 	subq.l	#1, %d1
diff --git a/arch/m68k/lib/cache.c b/arch/m68k/lib/cache.c
index ace791beb1..a8a292b77e 100644
--- a/arch/m68k/lib/cache.c
+++ b/arch/m68k/lib/cache.c
@@ -33,12 +33,13 @@ void icache_enable(void)
 
 	*cf_icache_status = 1;
 
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr2"::"r"(CONFIG_SYS_CACHE_ACR2));
 	__asm__ __volatile__("movec %0, %%acr3"::"r"(CONFIG_SYS_CACHE_ACR3));
-#elif defined(CONFIG_CF_V4e)
+#if defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr6"::"r"(CONFIG_SYS_CACHE_ACR6));
 	__asm__ __volatile__("movec %0, %%acr7"::"r"(CONFIG_SYS_CACHE_ACR7));
+#endif
 #else
 	__asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0));
 	__asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1));
@@ -54,16 +55,16 @@ void icache_disable(void)
 	*cf_icache_status = 0;
 	icache_invalid();
 
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr2"::"r"(temp));
 	__asm__ __volatile__("movec %0, %%acr3"::"r"(temp));
-#elif defined(CONFIG_CF_V4e)
+#if defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr6"::"r"(temp));
 	__asm__ __volatile__("movec %0, %%acr7"::"r"(temp));
+#endif
 #else
 	__asm__ __volatile__("movec %0, %%acr0"::"r"(temp));
 	__asm__ __volatile__("movec %0, %%acr1"::"r"(temp));
-
 #endif
 }
 
@@ -87,13 +88,13 @@ void dcache_enable(void)
 	dcache_invalid();
 	*cf_dcache_status = 1;
 
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0));
 	__asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1));
-#elif defined(CONFIG_CF_V4e)
+#if defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr4"::"r"(CONFIG_SYS_CACHE_ACR4));
 	__asm__ __volatile__("movec %0, %%acr5"::"r"(CONFIG_SYS_CACHE_ACR5));
-
+#endif
 #endif
 
 	__asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_DCACR));
@@ -108,19 +109,19 @@ void dcache_disable(void)
 
 	__asm__ __volatile__("movec %0, %%cacr"::"r"(temp));
 
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr0"::"r"(temp));
 	__asm__ __volatile__("movec %0, %%acr1"::"r"(temp));
-#elif defined(CONFIG_CF_V4e)
+#if defined(CONFIG_CF_V4E)
 	__asm__ __volatile__("movec %0, %%acr4"::"r"(temp));
 	__asm__ __volatile__("movec %0, %%acr5"::"r"(temp));
-
+#endif
 #endif
 }
 
 void dcache_invalid(void)
 {
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 	u32 temp;
 
 	temp = CONFIG_SYS_DCACHE_INV;
diff --git a/board/freescale/m54418twr/Makefile b/board/freescale/m54418twr/Makefile
index 371c04abe8..4ef1e5aee9 100644
--- a/board/freescale/m54418twr/Makefile
+++ b/board/freescale/m54418twr/Makefile
@@ -5,3 +5,5 @@
 #
 
 obj-y	= m54418twr.o
+extra-y	+= sbf_dram_init.o
+
diff --git a/board/freescale/m54418twr/sbf_dram_init.S b/board/freescale/m54418twr/sbf_dram_init.S
new file mode 100644
index 0000000000..7f25793fe3
--- /dev/null
+++ b/board/freescale/m54418twr/sbf_dram_init.S
@@ -0,0 +1,86 @@
+/*
+ * Board-specific sbf ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	move.l	#0xFC04002D, %a1
+	move.b	#46, (%a1)		/* DDR */
+
+	/* slew settings */
+	move.l	#0xEC094060, %a1
+	move.b	#0, (%a1)
+
+	/* use vco instead of cpu*2 clock for ddr clock */
+	move.l	#0xEC09001A, %a1
+	move.w	#0xE01D, (%a1)
+
+	/* DDR settings */
+	move.l	#0xFC0B8180, %a1
+	move.l	#0x00000000, (%a1)
+	move.l	#0x40000000, (%a1)
+
+	move.l	#0xFC0B81AC, %a1
+	move.l	#0x01030203, (%a1)
+
+	move.l	#0xFC0B8000, %a1
+	move.l	#0x01010101, (%a1)+	/* 0x00 */
+	move.l	#0x00000101, (%a1)+	/* 0x04 */
+	move.l	#0x01010100, (%a1)+	/* 0x08 */
+	move.l	#0x01010000, (%a1)+	/* 0x0C */
+	move.l	#0x00010101, (%a1)+	/* 0x10 */
+	move.l	#0xFC0B8018, %a1
+	move.l	#0x00010100, (%a1)+	/* 0x18 */
+	move.l	#0x00000001, (%a1)+	/* 0x1C */
+	move.l	#0x01000001, (%a1)+	/* 0x20 */
+	move.l	#0x00000100, (%a1)+	/* 0x24 */
+	move.l	#0x00010001, (%a1)+	/* 0x28 */
+	move.l	#0x00000200, (%a1)+	/* 0x2C */
+	move.l	#0x01000002, (%a1)+	/* 0x30 */
+	move.l	#0x00000000, (%a1)+	/* 0x34 */
+	move.l	#0x00000100, (%a1)+	/* 0x38 */
+	move.l	#0x02000100, (%a1)+	/* 0x3C */
+	move.l	#0x02000407, (%a1)+	/* 0x40 */
+	move.l	#0x02030007, (%a1)+	/* 0x44 */
+	move.l	#0x02000100, (%a1)+	/* 0x48 */
+	move.l	#0x0A030203, (%a1)+	/* 0x4C */
+	move.l	#0x00020708, (%a1)+	/* 0x50 */
+	move.l	#0x00050008, (%a1)+	/* 0x54 */
+	move.l	#0x04030002, (%a1)+	/* 0x58 */
+	move.l	#0x00000004, (%a1)+	/* 0x5C */
+	move.l	#0x020A0000, (%a1)+	/* 0x60 */
+	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
+	move.l	#0x00002004, (%a1)+	/* 0x68 */
+	move.l	#0x00000000, (%a1)+	/* 0x6C */
+	move.l	#0x00100010, (%a1)+	/* 0x70 */
+	move.l	#0x00100010, (%a1)+	/* 0x74 */
+	move.l	#0x00000000, (%a1)+	/* 0x78 */
+	move.l	#0x07990000, (%a1)+	/* 0x7C */
+	move.l	#0xFC0B80A0, %a1
+	move.l	#0x00000000, (%a1)+	/* 0xA0 */
+	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
+	move.l	#0x44520002, (%a1)+	/* 0xA8 */
+	move.l	#0x00C80023, (%a1)+	/* 0xAC */
+	move.l	#0xFC0B80B4, %a1
+	move.l	#0x0000C350, (%a1)	/* 0xB4 */
+	move.l	#0xFC0B80E0, %a1
+	move.l	#0x04000000, (%a1)+	/* 0xE0 */
+	move.l	#0x03000304, (%a1)+	/* 0xE4 */
+	move.l	#0x40040000, (%a1)+	/* 0xE8 */
+	move.l	#0xC0004004, (%a1)+	/* 0xEC */
+	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
+	move.l	#0x00000642, (%a1)+	/* 0xF4 */
+	move.l	#0xFC0B8024, %a1
+	tpf
+	move.l	#0x01000100, (%a1)	/* 0x24 */
+
+	move.l	#0x2000, %d1
+	bsr	asm_delay
+
+	rts
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
index 700ea2a74c..ec4956b8d6 100644
--- a/board/freescale/m54451evb/Makefile
+++ b/board/freescale/m54451evb/Makefile
@@ -6,3 +6,4 @@
 #
 
 obj-y	= m54451evb.o
+extra-y	+= sbf_dram_init.o
diff --git a/board/freescale/m54451evb/sbf_dram_init.S b/board/freescale/m54451evb/sbf_dram_init.S
new file mode 100644
index 0000000000..f8da3584fe
--- /dev/null
+++ b/board/freescale/m54451evb/sbf_dram_init.S
@@ -0,0 +1,97 @@
+/*
+ * Board-specific sbf ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+ #include <config.h>
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	/* Dram Initialization a1, a2, and d0 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+#ifdef CONFIG_SYS_NAND_BOOT
+	beq	asm_nand_chk_status
+#endif
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	move.l	#1000, %d1
+	bsr	asm_delay
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
+
+	move.l	#500, %d1
+	bsr	asm_delay
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
+	and.l	#0x7FFFFFFF, %d1
+
+	or.l	#0x10000C00, %d1
+
+	move.l	%d1, (%a2)
+	nop
+
+	move.l	#2000, %d1
+	bsr	asm_delay
+
+	rts
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index 1c775fadb8..ecbc3ca044 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -6,3 +6,4 @@
 #
 
 obj-y	= m54455evb.o
+extra-y	+= sbf_dram_init.o
diff --git a/board/freescale/m54455evb/sbf_dram_init.S b/board/freescale/m54455evb/sbf_dram_init.S
new file mode 100644
index 0000000000..2bf95a93a7
--- /dev/null
+++ b/board/freescale/m54455evb/sbf_dram_init.S
@@ -0,0 +1,101 @@
+/*
+ * Board-specific sbf ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+ #include <config.h>
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	/* Dram Initialization a1, a2, and d0 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+#ifdef CONFIG_SYS_NAND_BOOT
+	beq	asm_nand_chk_status
+#endif
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
+	nop
+
+	move.l	#1000, %d1
+	bsr	asm_delay
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1)
+	nop
+
+	move.l	#500, %d1
+	bsr	asm_delay
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
+	and.l	#0x7FFFFFFF, %d1
+
+	or.l	#0x10000C00, %d1
+
+	move.l	%d1, (%a2)
+	nop
+
+	move.l	#2000, %d1
+	bsr	asm_delay
+
+	rts
diff --git a/board/sysam/stmark2/Kconfig b/board/sysam/stmark2/Kconfig
new file mode 100644
index 0000000000..87ab7ab7b5
--- /dev/null
+++ b/board/sysam/stmark2/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_STMARK2
+
+config SYS_CPU
+	default "mcf5445x"
+
+config SYS_BOARD
+	default "stmark2"
+
+config SYS_VENDOR
+	default "sysam"
+
+config SYS_CONFIG_NAME
+	default "stmark2"
+
+endif
diff --git a/board/sysam/stmark2/MAINTAINERS b/board/sysam/stmark2/MAINTAINERS
new file mode 100644
index 0000000000..b87f432bb3
--- /dev/null
+++ b/board/sysam/stmark2/MAINTAINERS
@@ -0,0 +1,6 @@
+STMARK2 BOARD
+M:	Angelo Dureghello <angelo@sysam.it>
+S:	Maintained
+F:	board/sysam/stmark2/
+F:	include/configs/stmark2.h
+F:	configs/stmark2_defconfig
diff --git a/board/sysam/stmark2/Makefile b/board/sysam/stmark2/Makefile
new file mode 100644
index 0000000000..064a57ea05
--- /dev/null
+++ b/board/sysam/stmark2/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2014  Angelo Dureghello <angelo@sysam.it>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y = stmark2.o
+extra-y += sbf_dram_init.o
diff --git a/board/sysam/stmark2/sbf_dram_init.S b/board/sysam/stmark2/sbf_dram_init.S
new file mode 100644
index 0000000000..52abda5c3c
--- /dev/null
+++ b/board/sysam/stmark2/sbf_dram_init.S
@@ -0,0 +1,119 @@
+/*
+ * Board-specific early ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.equ	PPMCR0, 	0xfc04002d
+.equ	MSCR_SDRAMC,	0xec094060
+.equ	MISCCR2,	0xec09001a
+.equ	DDR_RCR,	0xfc0b8180
+.equ	DDR_PADCR,	0xfc0b81ac
+.equ	DDR_CR00,	0xfc0b8000
+.equ	DDR_CR06,	0xfc0b8018
+.equ	DDR_CR09,	0xfc0b8024
+.equ	DDR_CR40,	0xfc0b80a0
+.equ	DDR_CR45,	0xfc0b80b4
+.equ	DDR_CR56,	0xfc0b80e0
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	/* CD46 = DDR on */
+	move.l	#PPMCR0, %a1
+	move.b	#46, (%a1)
+
+	/* stmark 2, max drive strength */
+	move.l	#MSCR_SDRAMC, %a1
+	move.b	#1, (%a1)
+
+	/*
+	 * use cpu clock, seems more realiable
+	 *
+	 * DDR2 clock is serviced from DDR controller as input clock / 2
+	 * so, if clock comes from
+	 *   vco, i.e. 480(vco) / 2, so ddr clock is 240 Mhz (measured)
+	 *   cpu, i.e. 250(cpu) / 2, so ddr clock is 125 Mhz (measured)
+	 *
+	 *     .
+	 *    / \    DDR2 can't be clocked lower than 125Mhz
+	 *   / ! \   DDR2 init must pass further i/dcache enable test
+	 *  /_____\
+	 *  WARNING
+	 */
+
+	/* cpu / 2 = 125 Mhz for 480 Mhz pll */
+	move.l	#MISCCR2, %a1
+	move.w	#0xa01d, (%a1)
+
+	/* DDR force sw reset settings */
+	move.l	#DDR_RCR, %a1
+	move.l	#0x00000000, (%a1)
+	move.l	#0x40000000, (%a1)
+
+	/*
+	 * PAD_ODT_CS: for us seems both 1(75 ohm) and 2(150ohm) are good,
+	 * 500/700 mV are ok
+	 */
+	move.l	#DDR_PADCR, %a1
+	move.l	#0x01030203, (%a1)	/* as freescale tower */
+
+	move.l	#DDR_CR00, %a1
+	move.l	#0x01010101, (%a1)+	/* 0x00 */
+	move.l	#0x00000101, (%a1)+	/* 0x04 */
+	move.l	#0x01010100, (%a1)+	/* 0x08 */
+	move.l	#0x01010000, (%a1)+	/* 0x0C */
+	move.l	#0x00010101, (%a1)+	/* 0x10 */
+	move.l	#DDR_CR06, %a1
+	move.l	#0x00010100, (%a1)+	/* 0x18 */
+	move.l	#0x00000001, (%a1)+	/* 0x1C */
+	move.l	#0x01000001, (%a1)+	/* 0x20 */
+	move.l	#0x00000100, (%a1)+	/* 0x24 */
+	move.l	#0x00010001, (%a1)+	/* 0x28 */
+	move.l	#0x00000200, (%a1)+	/* 0x2C */
+	move.l	#0x01000002, (%a1)+	/* 0x30 */
+	move.l	#0x00000000, (%a1)+	/* 0x34 */
+	move.l	#0x00000100, (%a1)+	/* 0x38 */
+	move.l	#0x02000100, (%a1)+	/* 0x3C */
+	move.l	#0x02000407, (%a1)+	/* 0x40 */
+	move.l	#0x02030007, (%a1)+	/* 0x44 */
+	move.l	#0x02000100, (%a1)+	/* 0x48 */
+	move.l	#0x0A030203, (%a1)+	/* 0x4C */
+	move.l	#0x00020708, (%a1)+	/* 0x50 */
+	move.l	#0x00050008, (%a1)+	/* 0x54 */
+	move.l	#0x04030002, (%a1)+	/* 0x58 */
+	move.l	#0x00000004, (%a1)+	/* 0x5C */
+	move.l	#0x020A0000, (%a1)+	/* 0x60 */
+	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
+	move.l	#0x00002004, (%a1)+	/* 0x68 */
+	move.l	#0x00000000, (%a1)+	/* 0x6C */
+	move.l	#0x00100010, (%a1)+	/* 0x70 */
+	move.l	#0x00100010, (%a1)+	/* 0x74 */
+	move.l	#0x00000000, (%a1)+	/* 0x78 */
+	move.l	#0x07990000, (%a1)+	/* 0x7C */
+	move.l	#DDR_CR40, %a1
+	move.l	#0x00000000, (%a1)+	/* 0xA0 */
+	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
+	move.l	#0x44520002, (%a1)+	/* 0xA8 */
+	move.l	#0x00C80023, (%a1)+	/* 0xAC */
+	move.l	#DDR_CR45, %a1
+	move.l	#0x0000C350, (%a1)	/* 0xB4 */
+	move.l	#DDR_CR56, %a1
+	move.l	#0x04000000, (%a1)+	/* 0xE0 */
+	move.l	#0x03000304, (%a1)+	/* 0xE4 */
+	move.l	#0x40040000, (%a1)+	/* 0xE8 */
+	move.l	#0xC0004004, (%a1)+	/* 0xEC */
+	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
+	move.l	#0x00000642, (%a1)+	/* 0xF4 */
+	move.l	#DDR_CR09, %a1
+	tpf
+	move.l	#0x01000100, (%a1)	/* 0x24 */
+
+	move.l	#0x2000, %d1
+	bsr	asm_delay
+
+
+	rts
diff --git a/board/sysam/stmark2/stmark2.c b/board/sysam/stmark2/stmark2.c
new file mode 100644
index 0000000000..4f291ab6d6
--- /dev/null
+++ b/board/sysam/stmark2/stmark2.c
@@ -0,0 +1,47 @@
+/*
+ * Board-specific init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/immap.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	/*
+	 * need to to:
+	 * Check serial flash size. if 2mb evb, else 8mb demo
+	 */
+	puts("Board: ");
+	puts("Sysam stmark2\n");
+	return 0;
+}
+
+int dram_init(void)
+{
+	u32 dramsize;
+
+	/*
+	 * Serial Boot: The dram is already initialized in start.S
+	 * only require to return DRAM size
+	 */
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+	gd->ram_size = dramsize;
+
+	return 0;
+}
+
+int testdram(void)
+{
+	return 0;
+}
diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig
new file mode 100644
index 0000000000..cf3625c281
--- /dev/null
+++ b/configs/stmark2_defconfig
@@ -0,0 +1,26 @@
+CONFIG_M68K=y
+CONFIG_SYS_TEXT_BASE=0x47E00000
+CONFIG_TARGET_STMARK2=y
+CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=30000000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="stmark2 $ "
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_LOADB=y
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_CACHE=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_REGEX=y
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index 6822b4c6d3..66a17f2540 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -24,6 +24,8 @@
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
+#define LDS_BOARD_TEXT			board/freescale/m54418twr/sbf_dram_init.o (.text*)
+
 #undef CONFIG_WATCHDOG
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index f6d92512be..6d55bdd38b 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -23,6 +23,8 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
+#define LDS_BOARD_TEXT                  board/freescale/m54451evb/sbf_dram_init.o (.text*)
+
 #undef CONFIG_WATCHDOG
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index f1acf07db7..8e0056aebb 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -23,6 +23,8 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
+#define LDS_BOARD_TEXT                  board/freescale/m54455evb/sbf_dram_init.o (.text*)
+
 #undef CONFIG_WATCHDOG
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */
diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h
new file mode 100644
index 0000000000..5f711d03d8
--- /dev/null
+++ b/include/configs/stmark2.h
@@ -0,0 +1,199 @@
+/*
+ * Sysam stmark2 board configuration
+ *
+ * (C) Copyright 2017  Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __STMARK2_CONFIG_H
+#define __STMARK2_CONFIG_H
+
+#define CONFIG_STMARK2
+#define CONFIG_HOSTNAME			stmark2
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		0
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define LDS_BOARD_TEXT						\
+	board/sysam/stmark2/sbf_dram_init.o (.text*)
+
+#define CONFIG_TIMESTAMP
+
+#define CONFIG_BOOTARGS						\
+	"console=ttyS0,115200 root=/dev/ram0 rw "		\
+		"rootfstype=ramfs "				\
+		"rdinit=/bin/init "				\
+		"devtmpfs.mount=1"
+
+#define CONFIG_BOOTCOMMAND					\
+	"sf probe 0:1 50000000; "				\
+	"sf read ${loadaddr} 0x100000 ${kern_size}; "		\
+	"bootm ${loadaddr}"
+
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"kern_size=0x700000\0"					\
+	"loadaddr=0x40001000\0"					\
+		"-(rootfs)\0"					\
+	"update_uboot=loady ${loadaddr}; "			\
+		"sf probe 0:1 50000000; "			\
+		"sf erase 0 0x80000; "				\
+		"sf write ${loadaddr} 0 ${filesize}\0"		\
+	"update_kernel=loady ${loadaddr}; "			\
+		"setenv kern_size ${filesize}; saveenv; "	\
+		"sf probe 0:1 50000000; "			\
+		"sf erase 0x100000 0x700000; "			\
+		"sf write ${loadaddr} 0x100000 ${filesize}\0"	\
+	"update_rootfs=loady ${loadaddr}; "			\
+		"sf probe 0:1 50000000; "			\
+		"sf erase 0x00800000 0x100000; "		\
+		"sf write ${loadaddr} 0x00800000 ${filesize}\0"	\
+	""
+
+/* Realtime clock */
+#undef CONFIG_MCFRTC
+#define CONFIG_RTC_MCFRRTC
+#define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000
+
+/* spi not partitions */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define MTDIDS_DEFAULT			"nor0=spi-flash.0"
+#define MTDPARTS_DEFAULT					\
+	"mtdparts=spi-flash.0:"					\
+		"1m(u-boot),"					\
+		"7m(kernel),"					\
+		"-(rootfs)"
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_SPI
+#define CONFIG_CF_DSPI
+#define CONFIG_SF_DEFAULT_SPEED		50000000
+#define CONFIG_SERIAL_FLASH
+#define CONFIG_HARD_SPI
+#define CONFIG_SPI_FLASH_ISSI
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		1
+
+#define CONFIG_SYS_SBFHDR_SIZE		0x7
+
+#define CONFIG_SYS_DSPI_CTAR0		(DSPI_CTAR_TRSZ(7) | \
+					DSPI_CTAR_PCSSCK_1CLK | \
+					DSPI_CTAR_PASC(0) | \
+					DSPI_CTAR_PDT(0) | \
+					DSPI_CTAR_CSSCK(0) | \
+					DSPI_CTAR_ASC(0) | \
+					DSPI_CTAR_DT(1) | \
+					DSPI_CTAR_BR(6))
+#define CONFIG_SYS_DSPI_CTAR1		(CONFIG_SYS_DSPI_CTAR0)
+#define CONFIG_SYS_DSPI_CTAR2		(CONFIG_SYS_DSPI_CTAR0)
+
+/* Input, PCI, Flexbus, and VCO */
+#define CONFIG_EXTRA_CLOCK
+
+#define CONFIG_PRAM			2048	/* 2048 KB */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_MBAR			0xFC000000
+
+/*
+ * Definitions for initial stack pointer and data area (in internal SRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
+
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x400)
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_DRAM_TEST
+
+#if defined(CONFIG_CF_SBF)
+#define CONFIG_SERIAL_BOOT
+#endif
+
+#if defined(CONFIG_SERIAL_BOOT)
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_TEXT_BASE + 0x400)
+#else
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
+/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+/* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + \
+					(CONFIG_SYS_SDRAM_SIZE << 20))
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+
+#if defined(CONFIG_CF_SBF)
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_ENV_SPI_CS		1
+#define CONFIG_ENV_OFFSET		0x40000
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#endif
+
+#undef CONFIG_ENV_OVERWRITE
+
+/* Cache Configuration */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
+					 CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
+#define CACR_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					CONFIG_SYS_INIT_RAM_SIZE - 12)
+
+#endif /* __STMARK2_CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index db284571f7..b3dac2dceb 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2294,6 +2294,7 @@ CONFIG_STM32_GPIO
 CONFIG_STM32_HSE_HZ
 CONFIG_STM32_HZ
 CONFIG_STM32_SERIAL
+CONFIG_STMARK2
 CONFIG_STRIDER
 CONFIG_STRIDER_CON
 CONFIG_STRIDER_CON_DP