mx6sabresd: Convert to DM_PMIC

The usage of DM_PMIC is preferred, so convert to it.

This also brings the benefit of causing a significant amount
of code removal.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

3 files changed, 17 insertions, 60 deletions

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 8c35230855..96a76b0581 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -17,7 +17,6 @@
 #include <env.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
@@ -28,7 +27,6 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <i2c.h>
 #include <input.h>
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>
@@ -49,14 +47,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
 		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
-#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
-	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define I2C_PMIC	1
-
-#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
-
 #define DISP0_PWR_EN	IMX_GPIO_NR(1, 21)
 
 #define KEY_VOL_UP	IMX_GPIO_NR(1, 4)
@@ -174,32 +164,6 @@ static void enable_lvds(struct display_info_t const *dev)
 	enable_backlight();
 }
 
-static struct i2c_pads_info mx6q_i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
-		.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
-		.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
-static struct i2c_pads_info mx6dl_i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
-		.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
-		.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
 static void setup_spi(void)
 {
 	SETUP_IOMUX_PADS(ecspi1_pads);
@@ -495,10 +459,7 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
 #endif
-	if (is_mx6dq() || is_mx6dqp())
-		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
-	else
-		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
+
 #if defined(CONFIG_VIDEO_IPUV3)
 	setup_display();
 #endif
@@ -511,29 +472,32 @@ int board_init(void)
 
 int power_init_board(void)
 {
-	struct pmic *p;
+	struct udevice *dev;
 	unsigned int reg;
 	int ret;
 
-	p = pfuze_common_init(I2C_PMIC);
-	if (!p)
-		return -ENODEV;
+	ret = pmic_get("pfuze100@8", &dev);
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret != 0)
+		return ret;
 
-	ret = pfuze_mode_init(p, APS_PFM);
+	ret = pfuze_mode_init(dev, APS_PFM);
 	if (ret < 0)
 		return ret;
 
 	/* Increase VGEN3 from 2.5 to 2.8V */
-	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
+	reg = pmic_reg_read(dev, PFUZE100_VGEN3VOL);
 	reg &= ~LDO_VOL_MASK;
 	reg |= LDOB_2_80V;
-	pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
+	pmic_reg_write(dev, PFUZE100_VGEN3VOL, reg);
 
 	/* Increase VGEN5 from 2.8 to 3V */
-	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+	reg = pmic_reg_read(dev, PFUZE100_VGEN5VOL);
 	reg &= ~LDO_VOL_MASK;
 	reg |= LDOB_3_00V;
-	pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+	pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg);
 
 	return 0;
 }
@@ -902,7 +866,6 @@ void board_init_f(ulong dummy)
 	ccgr_init();
 	gpr_init();
 
-	/* iomux and setup of i2c */
 	board_early_init_f();
 
 	/* setup GP timer */
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 965536cfb6..2770b12598 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -11,9 +11,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_MX6QDL=y
 CONFIG_TARGET_MX6SABRESD=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
 CONFIG_SPL_TEXT_BASE=0x00908000
@@ -82,7 +79,6 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_DM_I2C=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
@@ -100,11 +96,12 @@ CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
-CONFIG_POWER_LEGACY=y
-CONFIG_POWER_PFUZE100=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_POWER_I2C=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 30d3b9d930..844f10e422 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -24,9 +24,6 @@
 #define CFG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
 #endif
 
-/* PMIC */
-#define CFG_POWER_PFUZE100_I2C_ADDR	0x08
-
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
 #define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)