Convert CONFIG_PCI_SCAN_SHOW to Kconfig

This converts the following to Kconfig:
   CONFIG_PCI_SCAN_SHOW

Signed-off-by: Tom Rini <trini@konsulko.com>

47 files changed, 10 insertions, 125 deletions

diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 114a361a18..c332878126 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -74,6 +74,7 @@ CONFIG_CMD_E1000=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index f5ad3664db..ea0c764674 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -97,6 +97,7 @@ CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index 9a9e0da514..1985ff96de 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -60,6 +60,7 @@ CONFIG_DM_ETH=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/configs/novena_defconfig b/configs/novena_defconfig
index f156296ada..d4ab93850c 100644
--- a/configs/novena_defconfig
+++ b/configs/novena_defconfig
@@ -75,6 +75,7 @@ CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 0401dc6142..892d7c60d2 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -83,6 +83,7 @@ CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PCI=y
 # CONFIG_PCI_PNP is not set
+CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index ad534ab586..8d87857ba0 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -84,6 +84,7 @@ CONFIG_DM_ETH=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
 CONFIG_PCIE_IMX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 0c74f95f60..f4c4aece58 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -81,6 +81,10 @@ config PCI_ARID
           support on PCI devices. This helps to skip some devices in BDF
           scan that are not present.
 
+config PCI_SCAN_SHOW
+	bool "Show PCI devices during startup"
+	depends on PCIE_IMX
+
 config PCIE_ECAM_GENERIC
 	bool "Generic ECAM-based PCI host controller support"
 	help
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 8e75d779c4..e8e0a1c669 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -232,10 +232,6 @@
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xD8000000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
 
-#ifdef CONFIG_PCI
-#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 /*
  * TSEC
  */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index bec2ca0f81..2eb33812f7 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -312,10 +312,6 @@
 #endif
 #define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 512M */
 
-#if defined(CONFIG_PCI)
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 #if defined(CONFIG_TSEC_ENET)
 
 #define CONFIG_TSEC1	1
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 5f64bd944b..aea744c826 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -94,8 +94,6 @@
 #else
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
 #endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #endif
 
 #define CONFIG_HWCONFIG
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index d7df5795cc..e019c16843 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -321,10 +321,6 @@
 #define CONFIG_SYS_DPAA_PME
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR	0x2
 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR	0x3
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index cdae8a88df..a519b5a935 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -377,8 +377,6 @@
 #define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
 #define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
 #endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #endif	/* CONFIG_PCI */
 
 /*
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 8222c67470..3a7c643cfc 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -362,8 +362,6 @@
 #define CONFIG_SYS_PCIE4_IO_VIRT	0xf8030000
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 #endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #endif	/* CONFIG_PCI */
 
 /*
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 53fc49fdcf..eff22c18bb 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -391,10 +391,6 @@
 #define CONFIG_SYS_PCIE4_MEM_PHYS	0xc40000000ull
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#endif
-
 /* Qman/Bman */
 #ifndef CONFIG_NOBQFMAN
 #define CONFIG_SYS_BMAN_NUM_PORTALS	18
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index b3648ae06f..ba9bfdd72f 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -344,10 +344,6 @@
 #define CONFIG_SYS_PCIE4_MEM_PHYS	0xc40000000ull
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#endif
-
 /* Qman/Bman */
 #ifndef CONFIG_NOBQFMAN
 #define CONFIG_SYS_BMAN_NUM_PORTALS	18
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 3edae6b01b..12b479f9c7 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -138,10 +138,6 @@
 #define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 /*
  * Environment
  */
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index a362282a29..6a4092a83e 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -19,9 +19,6 @@
 #define FDT_MODULE			"apalis-v1.2"
 #define FDT_MODULE_V1_0			"apalis"
 
-/* PCI host support */
-#undef CONFIG_PCI_SCAN_SHOW
-
 /*
  * Custom Distro Boot configuration:
  * 1. 8bit SD port (MMC1)
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 9969269bf2..9c9e9506dc 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -28,9 +28,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index bb1595f961..5da2778b67 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -17,9 +17,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 59ec064156..2252bf8954 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -314,10 +314,6 @@
 #define CONFIG_SYS_DPAA_PME
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR	0x1c
 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR	0x1d
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index 6912f39d32..b9d03d253d 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -14,9 +14,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* NAND */
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 3b3a7abd28..bba2b607aa 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -17,9 +17,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index 715a6d7a9e..7b305955c9 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -21,9 +21,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* NAND */
 
 /*
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 7e3f657e31..f8273a92f1 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -19,9 +19,6 @@
 /* I2C */
 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
diff --git a/include/configs/durian.h b/include/configs/durian.h
index c224511832..7971df8c1d 100644
--- a/include/configs/durian.h
+++ b/include/configs/durian.h
@@ -13,9 +13,6 @@
 #define PHYS_SDRAM_1_SIZE		0x7B000000
 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
 
-/* PCI CONFIG */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* BOOT */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index b4638a2b9d..ad00769bde 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -109,6 +109,4 @@
 
 #define CONFIG_IMX6_PWM_PER_CLK	66000000
 
-#define CONFIG_PCI_SCAN_SHOW
-
 #endif	/* __GE_BX50V3_CONFIG_H */
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index ff2c506443..fc32487e1c 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -28,9 +28,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index ee67215a09..a0ff3b8979 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -25,8 +25,6 @@
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 
-#define CONFIG_PCI_SCAN_SHOW
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 9dbf1a7ab3..b124ce5262 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -82,8 +82,6 @@
 				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
 				DSPI_CTAR_DT(0))
 
-#define CONFIG_PCI_SCAN_SHOW
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index f71ab2c80c..4f77acdaed 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -36,8 +36,6 @@
 #define __PHY_ETH2_MASK		0xFB
 #define __PHY_ETH1_MASK		0xFD
 
-#define CONFIG_PCI_SCAN_SHOW
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 6556f1aa65..ec688741a0 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -99,10 +99,6 @@
 
 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 00825b373e..1a46f72a73 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -301,10 +301,6 @@
 
 #endif
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 791df844c1..e5754c94e0 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -81,9 +81,6 @@
 
 /* PCIe */
 #define FSL_PCIE_COMPAT			"fsl,ls1021a-pcie"
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 921399e31d..09dce21aec 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -171,10 +171,6 @@
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		1
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index db00a0a002..ed32e20dbf 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -108,13 +108,6 @@
 
 /* I2C */
 
-/* PCIe */
-#ifndef SPL_NO_PCIE
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-#endif
-
 /*  DSPI  */
 
 /* FMan ucode */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 3a1106777f..94118c420e 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -76,10 +76,6 @@
 
 /* I2C */
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 9de602bc16..9ba7258572 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -251,10 +251,6 @@
 
 #define CONFIG_FSL_MEMAC
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #ifdef CONFIG_NXP_ESBC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 9c4d2feb78..a504a0ea46 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -238,10 +238,6 @@
 
 #define CONFIG_FSL_MEMAC
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index bc3a0046ac..77e25822dc 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -89,11 +89,6 @@
 /* Qixis */
 #define CONFIG_SYS_I2C_FPGA_ADDR		0x66
 
-/* PCI */
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* USB */
 
 #define COUNTER_FREQUENCY_REAL		(get_board_sys_clk() / 4)
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 845154520e..16f8858abb 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -24,7 +24,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
 #endif
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fe3cb1e4dc..58d550fee9 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -129,7 +129,6 @@
 #endif
 
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(2, 0)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
 #endif
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index ff9cb12a59..2007b48868 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -97,11 +97,4 @@
 
 /* Environment organization */
 
-/*
- * PCI express
- */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 #endif	       /* __CONFIG_H */
diff --git a/include/configs/novena.h b/include/configs/novena.h
index 54afcf620d..1696aa2852 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -48,7 +48,6 @@
 
 /* PCI express */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
 #endif
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index a639dbac78..f4bf2ab830 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -384,8 +384,6 @@
 #else
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
 #endif
-
-#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 357811f5fd..c93df00d58 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -26,7 +26,6 @@
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #endif
 
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index beaff28aa2..6eb022f26c 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -45,7 +45,6 @@
 #define CONFIG_MXC_USB_FLAGS   0
 
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(4, 6)
 #endif
 
diff --git a/include/configs/x530.h b/include/configs/x530.h
index 1f1b4e1449..cb126837b9 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -47,9 +47,6 @@
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
 /* NAND */
 
 #include <asm/arch/config.h>