Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell

- Armada 38x DDR3 fixes, enhancements (Chris)
- Armada 38x UTMI PHY SerDes fix (Chris)
- Helios4 update - sync with clearfog (Dennis)
- LaCie Kirkwood board rework - enable DM (Simon)
- net/mvpp2 memory init fix (Sven)

26 files changed, 297 insertions, 138 deletions

diff --git a/arch/arm/dts/armada-388-helios4-u-boot.dtsi b/arch/arm/dts/armada-388-helios4-u-boot.dtsi
index f0da9f42de..0753889854 100644
--- a/arch/arm/dts/armada-388-helios4-u-boot.dtsi
+++ b/arch/arm/dts/armada-388-helios4-u-boot.dtsi
@@ -14,6 +14,9 @@
 
 &spi1 {
 	u-boot,dm-spl;
+	spi-flash@0 {
+		u-boot,dm-spl;
+	};
 };
 
 &w25q32 {
@@ -21,6 +24,18 @@
 	u-boot,dm-spl;
 };
 
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&ahci0 {
+	u-boot,dm-spl;
+};
+
+&ahci1 {
+	u-boot,dm-spl;
+};
+
 &sdhci {
        u-boot,dm-spl;
 };
diff --git a/arch/arm/dts/armada-388-helios4.dts b/arch/arm/dts/armada-388-helios4.dts
index a154e0f4f4..fb49df2a3b 100644
--- a/arch/arm/dts/armada-388-helios4.dts
+++ b/arch/arm/dts/armada-388-helios4.dts
@@ -140,11 +140,6 @@
 	soc {
 		internal-regs {
 			i2c@11000 {
-				clock-frequency = <400000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
 				/*
 				 * PCA9655 GPIO expander, up to 1MHz clock.
 				 *  0-Board Revision bit 0 #
@@ -187,8 +182,7 @@
 						gpio-hog;
 						gpios = <5 GPIO_ACTIVE_HIGH>;
 						input;
-						line-name =
-						"usb-overcurrent-status";
+						line-name = "usb-overcurrent-status";
 					};
 				};
 
@@ -248,7 +242,7 @@
 				bus-width = <4>;
 				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 				no-1-8-v;
-				pinctrl-0 = <&microsom_sdhci_pins
+				pinctrl-0 = <&helios_sdhci_pins
 					     &helios_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
@@ -286,6 +280,12 @@
 					marvell,pins = "mpp20";
 					marvell,function = "gpio";
 				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
 				helios_led_pins: helios-led-pins {
 					marvell,pins = "mpp24", "mpp25",
 						       "mpp49", "mpp50",
diff --git a/arch/arm/dts/kirkwood-d2net-u-boot.dtsi b/arch/arm/dts/kirkwood-d2net-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-d2net-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/dts/kirkwood-is2-u-boot.dtsi b/arch/arm/dts/kirkwood-is2-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-is2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/dts/kirkwood-net2big-u-boot.dtsi b/arch/arm/dts/kirkwood-net2big-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-net2big-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/dts/kirkwood-ns2-u-boot.dtsi b/arch/arm/dts/kirkwood-ns2-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-ns2-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi b/arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/dts/kirkwood-ns2max-u-boot.dtsi b/arch/arm/dts/kirkwood-ns2max-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-ns2max-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi b/arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi
new file mode 100644
index 0000000000..1f3b185479
--- /dev/null
+++ b/arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 67a00cf1cf..2454730e6d 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -533,7 +533,7 @@ struct op_params pex_and_usb3_tx_config_params3[] = {
 struct op_params pex_by4_config_params[] = {
 	/* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */
 	{GLOBAL_CLK_SRC_HI, 0x800, 0x7, {0x5, 0x0, 0x0, 0x2}, 0, 0},
-	/* Lane Alignement enable */
+	/* Lane Alignment enable */
 	{LANE_ALIGN_REG0, 0x800, 0x1000, {0x0, 0x0, 0x0, 0x0}, 0, 0},
 	/* Max PLL phy config */
 	{CALIBRATION_CTRL_REG, 0x800, 0x1000, {0x1000, 0x1000, 0x1000, 0x1000},
@@ -672,12 +672,29 @@ struct op_params usb2_power_up_params[] = {
 	{0xc200c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
 	/* Phy0 register 3  - TX Channel control 0 */
 	{0xc400c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
-	/* check PLLCAL_DONE is set and IMPCAL_DONE is set */
+	/* Decrease the amplitude of the low speed eye to meet the spec */
+	{0xc000c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	{0xc200c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	{0xc400c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	/* Change the High speed impedance threshold */
+	{0xc0008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+	{0xc2008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+	{0xc4008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+	/* Change the squelch level of the receiver to meet the receiver electrical measurements (squelch and receiver sensitivity tests) */
+	{0xc0014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	{0xc2014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	{0xc4014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	/* Check PLLCAL_DONE is set and IMPCAL_DONE is set */
 	{0xc0008, 0x0 /*NA*/, 0x80800000, {0x80800000}, 1, 1000},
-	/* check REG_SQCAL_DONE  is set */
+	/* Check REG_SQCAL_DONE  is set */
 	{0xc0018, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
-	/* check PLL_READY  is set */
-	{0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000}
+	/* Check PLL_READY  is set */
+	{0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
+	/* Start calibrate of high seed impedance */
+	{0xc0008, 0x0 /*NA*/, 0x2000, {0x2000}, 0, 0},
+	{0x0, 0x0 /*NA*/, 0x0, {0x0}, 10, 0},
+	/* De-assert  the calibration signal */
+	{0xc0008, 0x0 /*NA*/, 0x2000, {0x0}, 0, 0},
 };
 
 /*
diff --git a/board/LaCie/net2big_v2/MAINTAINERS b/board/LaCie/net2big_v2/MAINTAINERS
index 8fec70315f..7046e1b2c5 100644
--- a/board/LaCie/net2big_v2/MAINTAINERS
+++ b/board/LaCie/net2big_v2/MAINTAINERS
@@ -1,6 +1,12 @@
 NET2BIG_V2 BOARD
 M:	Simon Guinot <simon.guinot@sequanux.org>
 S:	Maintained
+F:	arch/arm/dts/kirkwood-d2net.dts
+F:	arch/arm/dts/kirkwood-d2net-u-boot.dtsi
+F:	arch/arm/dts/kirkwood-d2net.dtsi
+F:	arch/arm/dts/kirkwood-net2big.dts
+F:	arch/arm/dts/kirkwood-net2big-u-boot.dtsi
+F:	arch/arm/dts/kirkwood-netxbig.dtsi
 F:	board/LaCie/net2big_v2/
 F:	include/configs/lacie_kw.h
 F:	configs/d2net_v2_defconfig
diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c
index dbd8b5755d..e94c9a6dce 100644
--- a/board/LaCie/net2big_v2/net2big_v2.c
+++ b/board/LaCie/net2big_v2/net2big_v2.c
@@ -239,7 +239,7 @@ int misc_init_r(void)
 /* Configure and initialize PHY */
 void reset_phy(void)
 {
-	mv_phy_88e1116_init("egiga0", 8);
+	mv_phy_88e1116_init("ethernet-controller@72000", 8);
 }
 #endif
 
diff --git a/board/LaCie/netspace_v2/MAINTAINERS b/board/LaCie/netspace_v2/MAINTAINERS
index 55fd50d4eb..1cc4f7108b 100644
--- a/board/LaCie/netspace_v2/MAINTAINERS
+++ b/board/LaCie/netspace_v2/MAINTAINERS
@@ -1,14 +1,21 @@
-NETSPACE_V2 BOARD
+NETSPACE_V2 BOARDS
 M:	Simon Guinot <simon.guinot@sequanux.org>
 S:	Maintained
+F:	arch/arm/dts/kirkwood-is2.dts
+F:	arch/arm/dts/kirkwood-is2-u-boot.dtsi
+F:	arch/arm/dts/kirkwood-ns2-common.dtsi
+F:	arch/arm/dts/kirkwood-ns2.dts
+F:	arch/arm/dts/kirkwood-ns2lite.dts
+F:	arch/arm/dts/kirkwood-ns2lite-u-boot.dtsi
+F:	arch/arm/dts/kirkwood-ns2max.dts
+F:	arch/arm/dts/kirkwood-ns2max-u-boot.dtsi
+F:	arch/arm/dts/kirkwood-ns2mini.dts
+F:	arch/arm/dts/kirkwood-ns2mini-u-boot.dtsi
+F:	arch/arm/dts/kirkwood-ns2-u-boot.dtsi
 F:	board/LaCie/netspace_v2/
 F:	include/configs/lacie_kw.h
 F:	configs/inetspace_v2_defconfig
-F:	configs/netspace_max_v2_defconfig
-F:	configs/netspace_v2_defconfig
-
-NETSPACE_LITE_V2 BOARD
-#M:	-
-S:	Maintained
 F:	configs/netspace_lite_v2_defconfig
+F:	configs/netspace_max_v2_defconfig
 F:	configs/netspace_mini_v2_defconfig
+F:	configs/netspace_v2_defconfig
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c
index 011cc563d1..33246b2015 100644
--- a/board/LaCie/netspace_v2/netspace_v2.c
+++ b/board/LaCie/netspace_v2/netspace_v2.c
@@ -100,9 +100,9 @@ int misc_init_r(void)
 void reset_phy(void)
 {
 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
-	mv_phy_88e1318_init("egiga0", 0);
+	mv_phy_88e1318_init("ethernet-controller@72000", 0);
 #else
-	mv_phy_88e1116_init("egiga0", 8);
+	mv_phy_88e1116_init("ethernet-controller@72000", 8);
 #endif
 }
 #endif
diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig
index fe3c6c4762..31a5d91af2 100644
--- a/configs/d2net_v2_defconfig
+++ b/configs/d2net_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" D2 v2"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="d2v2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -39,15 +39,20 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
index 1edd832a1b..2085887adb 100644
--- a/configs/helios4_defconfig
+++ b/configs/helios4_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_SYS_TEXT_BASE=0x00800000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -24,40 +25,47 @@ CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET=0x1
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_CMD_TLV_EEPROM=y
+CONFIG_SPL_CMD_TLV_EEPROM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="armada-388-helios4"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_MVEBU=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0x1
 CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SPL_I2C_EEPROM=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
 CONFIG_MTD=y
 CONFIG_SF_DEFAULT_BUS=1
-CONFIG_SF_DEFAULT_SPEED=104000000
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig
index 6144eb5fad..b5973977a5 100644
--- a/configs/inetspace_v2_defconfig
+++ b/configs/inetspace_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" IS v2"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -39,15 +39,20 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig
index 1389d30900..bba8503049 100644
--- a/configs/net2big_v2_defconfig
+++ b/configs/net2big_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" 2Big v2"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="2big2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -39,15 +39,20 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig
index c744d2c58e..bfa93dbd1c 100644
--- a/configs/netspace_lite_v2_defconfig
+++ b/configs/netspace_lite_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" NS v2 Lite"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -39,15 +39,21 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig
index 8602729fcb..d0f750369a 100644
--- a/configs/netspace_max_v2_defconfig
+++ b/configs/netspace_max_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" NS Max v2"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -39,15 +39,21 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig
index ba9301de4d..6cfaccf51d 100644
--- a/configs/netspace_mini_v2_defconfig
+++ b/configs/netspace_mini_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" NS v2 Mini"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -37,12 +37,16 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig
index 6ba1ef423e..1bd148f9b5 100644
--- a/configs/netspace_v2_defconfig
+++ b/configs/netspace_v2_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_IDENT_STRING=" NS v2"
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -20,9 +21,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
-CONFIG_CMD_IDE=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -39,15 +39,20 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
 CONFIG_ENV_ADDR=0x70000
-CONFIG_MVSATA_IDE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_BLK=y
 # CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
index df832ac6dc..58ffb20507 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
@@ -11,7 +11,7 @@
 #define VREF_MAX_INDEX			7
 #define MAX_VALUE			(1024 - 1)
 #define MIN_VALUE			(-MAX_VALUE)
-#define GET_RD_SAMPLE_DELAY(data, cs)	((data >> rd_sample_mask[cs]) & 0xf)
+#define GET_RD_SAMPLE_DELAY(data, cs)	((data >> rd_sample_mask[cs]) & 0x1f)
 
 u32 ca_delay;
 int ddr3_tip_centr_skip_min_win_check = 0;
@@ -91,8 +91,8 @@ int ddr3_tip_write_additional_odt_setting(u32 dev_num, u32 if_id)
 			min_read_sample = read_sample[cs_num];
 	}
 
-	min_read_sample = min_read_sample - 1;
-	max_read_sample = max_read_sample + 4 + (max_phase + 1) / 2 + 1;
+	min_read_sample = min_read_sample + 2;
+	max_read_sample = max_read_sample + 7 + (max_phase + 1) / 2 + 1;
 	if (min_read_sample >= 0xf)
 		min_read_sample = 0xf;
 	if (max_read_sample >= 0x1f)
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 19b9375ee2..a5747a25ab 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -1263,6 +1263,7 @@ struct buffer_location {
  * can be enabled at once
  */
 static struct buffer_location buffer_loc;
+static int buffer_loc_init;
 
 /*
  * Page table entries are set to 1MB, or multiples of 1MB
@@ -5247,40 +5248,44 @@ static int mvpp2_base_probe(struct udevice *dev)
 	 * be active. Make this area DMA-safe by disabling the D-cache
 	 */
 
-	/* Align buffer area for descs and rx_buffers to 1MiB */
-	bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
-	mmu_set_region_dcache_behaviour((unsigned long)bd_space,
-					BD_SPACE, DCACHE_OFF);
-
-	buffer_loc.aggr_tx_descs = (struct mvpp2_tx_desc *)bd_space;
-	size += MVPP2_AGGR_TXQ_SIZE * MVPP2_DESC_ALIGNED_SIZE;
-
-	buffer_loc.tx_descs =
-		(struct mvpp2_tx_desc *)((unsigned long)bd_space + size);
-	size += MVPP2_MAX_TXD * MVPP2_DESC_ALIGNED_SIZE;
+	if (!buffer_loc_init) {
+		/* Align buffer area for descs and rx_buffers to 1MiB */
+		bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
+		mmu_set_region_dcache_behaviour((unsigned long)bd_space,
+						BD_SPACE, DCACHE_OFF);
+
+		buffer_loc.aggr_tx_descs = (struct mvpp2_tx_desc *)bd_space;
+		size += MVPP2_AGGR_TXQ_SIZE * MVPP2_DESC_ALIGNED_SIZE;
+
+		buffer_loc.tx_descs =
+			(struct mvpp2_tx_desc *)((unsigned long)bd_space + size);
+		size += MVPP2_MAX_TXD * MVPP2_DESC_ALIGNED_SIZE;
+
+		buffer_loc.rx_descs =
+			(struct mvpp2_rx_desc *)((unsigned long)bd_space + size);
+		size += MVPP2_MAX_RXD * MVPP2_DESC_ALIGNED_SIZE;
+
+		for (i = 0; i < MVPP2_BM_POOLS_NUM; i++) {
+			buffer_loc.bm_pool[i] =
+				(unsigned long *)((unsigned long)bd_space + size);
+			if (priv->hw_version == MVPP21)
+				size += MVPP2_BM_POOL_SIZE_MAX * 2 * sizeof(u32);
+			else
+				size += MVPP2_BM_POOL_SIZE_MAX * 2 * sizeof(u64);
+		}
 
-	buffer_loc.rx_descs =
-		(struct mvpp2_rx_desc *)((unsigned long)bd_space + size);
-	size += MVPP2_MAX_RXD * MVPP2_DESC_ALIGNED_SIZE;
+		for (i = 0; i < MVPP2_BM_LONG_BUF_NUM; i++) {
+			buffer_loc.rx_buffer[i] =
+				(unsigned long *)((unsigned long)bd_space + size);
+			size += RX_BUFFER_SIZE;
+		}
 
-	for (i = 0; i < MVPP2_BM_POOLS_NUM; i++) {
-		buffer_loc.bm_pool[i] =
-			(unsigned long *)((unsigned long)bd_space + size);
-		if (priv->hw_version == MVPP21)
-			size += MVPP2_BM_POOL_SIZE_MAX * 2 * sizeof(u32);
-		else
-			size += MVPP2_BM_POOL_SIZE_MAX * 2 * sizeof(u64);
-	}
+		/* Clear the complete area so that all descriptors are cleared */
+		memset(bd_space, 0, size);
 
-	for (i = 0; i < MVPP2_BM_LONG_BUF_NUM; i++) {
-		buffer_loc.rx_buffer[i] =
-			(unsigned long *)((unsigned long)bd_space + size);
-		size += RX_BUFFER_SIZE;
+		buffer_loc_init = 1;
 	}
 
-	/* Clear the complete area so that all descriptors are cleared */
-	memset(bd_space, 0, size);
-
 	/* Save base addresses for later use */
 	priv->base = (void *)devfdt_get_addr_index(dev, 0);
 	if (IS_ERR(priv->base))
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index 31e2e78b62..2f4b67025c 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -6,7 +6,6 @@
 #ifndef _CONFIG_HELIOS4_H
 #define _CONFIG_HELIOS4_H
 
-#include <linux/sizes.h>
 #include <linux/stringify.h>
 
 /*
@@ -30,26 +29,30 @@
 
 #define CONFIG_ENV_MIN_ENTRIES		128
 
+/* Environment in MMC */
+#define CONFIG_SYS_MMC_ENV_DEV		0
 /*
- * SATA/SCSI/AHCI configuration
+ * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
+ * boot image starts @ LBA-0.
+ * As result in MMC/eMMC case it will be a 1 sector gap between u-boot
+ * image and environment
  */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
-#define CONFIG_SYS_SCSI_MAX_LUN         2
-#define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
 
-#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
-/* Environment in SPI NOR flash */
-#endif
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
-/* Environment in MMC */
-#define CONFIG_SYS_MMC_ENV_DEV		0
-/* stay within first 1M */
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_SCAN_SHOW
 #endif
 
-#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
+/* SATA support */
+#ifdef CONFIG_SCSI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					CONFIG_SYS_SCSI_MAX_LUN)
+#endif
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
@@ -57,22 +60,6 @@
 	"initrd_high=0x10000000\0"
 
 /* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH		1
-#define SPL_BOOT_SDIO_MMC_CARD		2
-
-#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
-#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH
-#endif
-#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
-#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SDIO_MMC_CARD
-#endif
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
@@ -88,11 +75,10 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
+#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
+/* SPL related SPI defines */
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
+#elif defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA)
 /* SPL related MMC defines */
 #define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
 #define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
@@ -100,6 +86,7 @@
 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
 #endif
 #endif
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -121,16 +108,46 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
-#ifdef CONFIG_SATA
-#define BOOT_TARGET_DEVICES_SATA(func) func(SATA, sata, 0)
+#ifndef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI_BUS0(func)
+#define BOOT_TARGET_DEVICES_SCSI_BUS1(func)
+#define BOOT_TARGET_DEVICES_SCSI_BUS2(func)
+#else
+/*
+ * With SCSI enabled, M.2 SATA is always located on bus 0
+ */
+#define BOOT_TARGET_DEVICES_SCSI_BUS0(func) func(SCSI, scsi, 0)
+
+/*
+ * Either one or both mPCIe slots may be configured as mSATA interfaces. The
+ * SCSI bus ids are assigned based on sequence of hardware present, not always
+ * tied to hardware slot ids. As such, use second SCSI bus if either slot is
+ * set for SATA, and only use third SCSI bus if both slots are SATA enabled.
+ */
+#if defined (CONFIG_HELIOS4_CON2_SATA) || defined (CONFIG_HELIOS4_CON3_SATA)
+#define BOOT_TARGET_DEVICES_SCSI_BUS1(func) func(SCSI, scsi, 1)
+#else
+#define BOOT_TARGET_DEVICES_SCSI_BUS1(func)
+#endif
+
+#if defined (CONFIG_HELIOS4_CON2_SATA) && defined (CONFIG_HELIOS4_CON3_SATA)
+#define BOOT_TARGET_DEVICES_SCSI_BUS2(func) func(SCSI, scsi, 2)
 #else
-#define BOOT_TARGET_DEVICES_SATA(func)
+#define BOOT_TARGET_DEVICES_SCSI_BUS2(func)
 #endif
 
+#endif /* CONFIG_SCSI */
+
+/*
+ * The SCSI buses are attempted in increasing bus order, there is no current
+ * mechanism to alter the default bus priority order for booting.
+ */
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
-	BOOT_TARGET_DEVICES_SATA(func) \
+	BOOT_TARGET_DEVICES_SCSI_BUS0(func) \
+	BOOT_TARGET_DEVICES_SCSI_BUS1(func) \
+	BOOT_TARGET_DEVICES_SCSI_BUS2(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index 5bb0255a74..031bc995e3 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -83,18 +83,17 @@
 /*
  * SATA Driver configuration
  */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
+
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
 	defined(CONFIG_NET2BIG_V2)
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#define CONFIG_SYS_IDE_MAXBUS           2
-#define CONFIG_SYS_IDE_MAXDEVICE        2
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #else
-#define CONFIG_SYS_IDE_MAXBUS           1
-#define CONFIG_SYS_IDE_MAXDEVICE        1
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #endif
-#endif /* CONFIG_MVSATA_IDE */
+#endif /* CONFIG_SATA */
 
 /*
  * Enable GPI0 support
@@ -144,8 +143,8 @@
 		"set stdin $stdin,nc; "				\
 		"set stdout $stdout,nc; "			\
 		"set stderr $stderr,nc;\0"			\
-	"diskload=ide reset && "				\
-		"ext2load ide 0:1 $loadaddr /boot/$bootfile\0"	\
+	"diskload=sata init && "				\
+		"ext2load sata 0:1 $loadaddr /boot/$bootfile\0"	\
 	"usbload=usb start && "					\
 		"fatload usb 0:1 $loadaddr /boot/$bootfile\0"