diff options
| author | Tom Rini <trini@konsulko.com> | 2020-06-05 01:12:57 +0300 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-06-05 01:12:57 +0300 |
| commit | 6bca655bcbc8e81a21ab27a0d1e9c711ab8e0e24 (patch) | |
| tree | 047f05ad2648c4b88ff5e02187e92a9e7835e8ae | |
| parent | 07d90d8bd451b9595fb0369c51f90ee2dccd5d9f (diff) | |
| parent | f3e2ebede3019740ee90471acc0a29a684b59221 (diff) | |
| download | u-boot-6bca655bcbc8e81a21ab27a0d1e9c711ab8e0e24.tar.xz | |
Merge branch '2020-06-04-misc-bugfixes'
- Resync checkpatch.pl (largely) with v5.7 and introduce U-Boot specific
checks in a localized area, so they aren't lost in the future.
- Complete / re-migrate some options from config headers to defconfigs
- Add dependencies to the various debug uart drivers
292 files changed, 435 insertions, 780 deletions
diff --git a/.checkpatch.conf b/.checkpatch.conf index 95f19635d3..ed0c2150ba 100644 --- a/.checkpatch.conf +++ b/.checkpatch.conf @@ -28,3 +28,6 @@ # A bit shorter of a description is OK with us. --min-conf-desc-length=2 + +# Extra checks for U-Boot +--u-boot @@ -1330,21 +1330,6 @@ The following options need to be configured: can be displayed via the splashscreen support or the bmp command. -- Compression support: - CONFIG_GZIP - - Enabled by default to support gzip compressed images. - - CONFIG_BZIP2 - - If this option is set, support for bzip2 compressed - images is included. If not, only uncompressed and gzip - compressed images are supported. - - NOTE: the bzip2 algorithm requires a lot of RAM, so - the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should - be at least 4MB. - - MII/PHY support: CONFIG_PHY_CLOCK_FREQ (ppc4xx) @@ -1567,14 +1552,6 @@ The following options need to be configured: This enable the NEW i2c subsystem, and will allow you to use i2c commands at the u-boot command line (as long as you set - CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c - based realtime clock chips or other i2c devices. See - common/cmd_i2c.c for a description of the command line - interface. - - ported i2c driver to the new framework: - - drivers/i2c/soft_i2c.c: - - activate first bus with CONFIG_SYS_I2C_SOFT define CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE for defining speed and slave address - activate second bus with I2C_SOFT_DECLARATIONS2 define diff --git a/board/phytec/pfla02/pfla02.c b/board/phytec/pfla02/pfla02.c index fed8f52e3e..0a961cc8a5 100644 --- a/board/phytec/pfla02/pfla02.c +++ b/board/phytec/pfla02/pfla02.c @@ -117,7 +117,7 @@ static iomux_v3_cfg_t const gpios_pads[] = { IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)), }; -#ifdef CONFIG_CMD_NAND +#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_SPL_BUILD) /* NAND */ static iomux_v3_cfg_t const nfc_pads[] = { IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL)), @@ -274,7 +274,7 @@ static void setup_gpios(void) SETUP_IOMUX_PADS(gpios_pads); } -#ifdef CONFIG_CMD_NAND +#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_SPL_BUILD) static void setup_gpmi_nand(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -361,7 +361,7 @@ int board_init(void) setup_gpios(); -#ifdef CONFIG_CMD_NAND +#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_SPL_BUILD) setup_gpmi_nand(); #endif return 0; @@ -657,7 +657,7 @@ void board_init_f(ulong dummy) .refr = 7, /* 8 refresh commands per refresh cycle */ }; -#ifdef CONFIG_CMD_NAND +#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_SPL_BUILD) /* Enable NAND */ setup_gpmi_nand(); #endif diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index 792d2165bc..d3a0cb88cb 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -16,6 +16,7 @@ CONFIG_LOCALVERSION="-EETS-1.0.0" CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_LATE_INIT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig index c0bb093c4d..94c513457c 100644 --- a/configs/am335x_shc_defconfig +++ b/configs/am335x_shc_defconfig @@ -40,6 +40,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am335x-shc" CONFIG_ENV_IS_IN_MMC=y diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig index 026a81538e..6650b3eb6d 100644 --- a/configs/am335x_shc_ict_defconfig +++ b/configs/am335x_shc_ict_defconfig @@ -41,6 +41,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am335x-shc" CONFIG_ENV_IS_IN_MMC=y diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig index 91c1ce7f54..f03f1fa0ae 100644 --- a/configs/am335x_shc_netboot_defconfig +++ b/configs/am335x_shc_netboot_defconfig @@ -42,6 +42,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am335x-shc" CONFIG_ENV_IS_IN_MMC=y diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig index 4fa7b6dbc4..13b3686417 100644 --- a/configs/am335x_shc_sdboot_defconfig +++ b/configs/am335x_shc_sdboot_defconfig @@ -41,6 +41,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am335x-shc" CONFIG_ENV_IS_IN_MMC=y diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index 604a473fa9..868303a29c 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 4c6b100654..6b0f0e4638 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -45,12 +45,16 @@ CONFIG_SYS_MEMTEST_END=0x10010000 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 785283fbea..030d28a5df 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -55,6 +55,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_SPI=y CONFIG_ZYNQMP_GQSPI=y diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 80a817a3f3..ee032e25f6 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -56,3 +56,4 @@ CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11B=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig index d467e62dee..a2707a0da5 100644 --- a/configs/bcm7260_defconfig +++ b/configs/bcm7260_defconfig @@ -11,10 +11,17 @@ CONFIG_FIT_SIGNATURE=y CONFIG_BOOTDELAY=1 CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsaveaddr};fdt addr ${fdtsaveaddr};" +CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot>" +CONFIG_CMD_ASKENV=y +CONFIG_CMD_GPT=y +# CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y -CONFIG_EFI_PARTITION=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FS_GENERIC=y CONFIG_OF_PRIOR_STAGE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig index 2c71a5efed..65c4b33a58 100644 --- a/configs/bcm7445_defconfig +++ b/configs/bcm7445_defconfig @@ -12,11 +12,17 @@ CONFIG_FIT_SIGNATURE=y CONFIG_BOOTDELAY=1 CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsaveaddr};fdt addr ${fdtsaveaddr};" +CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot>" +CONFIG_CMD_ASKENV=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y CONFIG_CMD_SPI=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FS_GENERIC=y CONFIG_OF_PRIOR_STAGE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig index 9f88023836..ef5f567615 100644 --- a/configs/bitmain_antminer_s9_defconfig +++ b/configs/bitmain_antminer_s9_defconfig @@ -66,6 +66,7 @@ CONFIG_MII=y CONFIG_ZYNQ_GEM=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y # CONFIG_WATCHDOG is not set CONFIG_WDT=y diff --git a/configs/blanche_defconfig b/configs/blanche_defconfig index 137acceea0..641b779023 100644 --- a/configs/blanche_defconfig +++ b/configs/blanche_defconfig @@ -24,7 +24,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_SDRAM=y -CONFIG_CMD_SPI=y +# CONFIG_CMD_SF is not set CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/cherryhill_defconfig b/configs/cherryhill_defconfig index c3ad39c725..c1b6e715f4 100644 --- a/configs/cherryhill_defconfig +++ b/configs/cherryhill_defconfig @@ -41,3 +41,4 @@ CONFIG_RTL8169=y CONFIG_SPI=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y +# CONFIG_GZIP is not set diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig index 2039ea6186..d7cab2334b 100644 --- a/configs/chromebook_coral_defconfig +++ b/configs/chromebook_coral_defconfig @@ -98,4 +98,5 @@ CONFIG_SPL_FS_CBFS=y CONFIG_TPL_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y CONFIG_TPM=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index a13f6eac80..75f3d2c411 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -73,3 +73,4 @@ CONFIG_VIDEO_IVYBRIDGE_IGD=y CONFIG_CONSOLE_SCROLL_LINES=5 CONFIG_CMD_DHRYSTONE=y CONFIG_TPM=y +# CONFIG_GZIP is not set diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index de4186cdf2..3d51ec9606 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -68,4 +68,5 @@ CONFIG_VIDEO_IVYBRIDGE_IGD=y CONFIG_CONSOLE_SCROLL_LINES=5 CONFIG_CMD_DHRYSTONE=y CONFIG_TPM=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig index fb4d88028c..c18cba9cf4 100644 --- a/configs/chromebook_samus_defconfig +++ b/configs/chromebook_samus_defconfig @@ -71,3 +71,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_CONSOLE_SCROLL_LINES=5 CONFIG_TPM=y +# CONFIG_GZIP is not set diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig index a12a04b0bf..82172ba810 100644 --- a/configs/chromebook_samus_tpl_defconfig +++ b/configs/chromebook_samus_tpl_defconfig @@ -87,3 +87,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_CONSOLE_SCROLL_LINES=5 CONFIG_TPM=y +# CONFIG_GZIP is not set diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 48bcd94a62..fd87ab262b 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -55,3 +55,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_CONSOLE_SCROLL_LINES=5 CONFIG_TPM=y +# CONFIG_GZIP is not set diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig index d2766190de..a38c6c2429 100644 --- a/configs/cl-som-imx7_defconfig +++ b/configs/cl-som-imx7_defconfig @@ -21,6 +21,7 @@ CONFIG_SPL_TEXT_BASE=0x00911000 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 +CONFIG_BOARD_LATE_INIT=y CONFIG_BOUNCE_BUFFER=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 @@ -57,6 +58,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb" # CONFIG_ENV_IS_IN_MMC is not set CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_CMD_PCA953X=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_USDHC=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index adb7c95019..44a3ff859c 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -44,12 +44,16 @@ CONFIG_SYS_MEMTEST_END=0x10010000 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index abf5263081..eacc9852bd 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -66,3 +66,4 @@ CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_114=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig index aac0ed2928..04b9d5eee9 100644 --- a/configs/conga-qeval20-qa3-e3845_defconfig +++ b/configs/conga-qeval20-qa3-e3845_defconfig @@ -62,3 +62,4 @@ CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_114=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index 4ac46ff759..df609d5036 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -23,6 +23,7 @@ CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_BOARD_LATE_INIT=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_SPL_BOARD_INIT=y diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index 39469b5203..6bba9ec72b 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -46,3 +46,4 @@ CONFIG_SYSCON=y CONFIG_SOUND=y CONFIG_SOUND_I8254=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index ad41c91e6e..4a43b59e0f 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -41,3 +41,4 @@ CONFIG_SYSCON=y CONFIG_SOUND=y CONFIG_SOUND_I8254=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index aac8a391fd..4cb734477e 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -46,3 +46,4 @@ CONFIG_SPI=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y # CONFIG_VIDEO_VESA is not set +# CONFIG_GZIP is not set diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 06d5ce4cad..706f5cd1c4 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -52,3 +52,4 @@ CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig index 628b3516a8..9682cb7ca1 100644 --- a/configs/deneb_defconfig +++ b/configs/deneb_defconfig @@ -36,13 +36,16 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_CMD_CPU=y +# CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set CONFIG_CMD_CLK=y CONFIG_CMD_DM=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig index fdf686f956..56fc282762 100644 --- a/configs/dfi-bt700-q7x-151_defconfig +++ b/configs/dfi-bt700-q7x-151_defconfig @@ -61,3 +61,4 @@ CONFIG_USB_ETHER_RTL8152=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_114=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index e0dfffa4b5..d20405e5b2 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -100,3 +100,4 @@ CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_WATCHDOG_TIMEOUT_MSECS=60000 CONFIG_IMX_WATCHDOG=y +CONFIG_BZIP2=y diff --git a/configs/display5_defconfig b/configs/display5_defconfig index 6241375c4c..78e4627bda 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -46,6 +46,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="display5 > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_ELF is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_EEPROM=y diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index eb46e3b256..d453073ddb 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -46,6 +46,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="display5 factory > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_ELF is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_EEPROM=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index 89ed5eb13c..12419ac6dd 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -18,6 +18,7 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y @@ -46,4 +47,3 @@ CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y -CONFIG_FS_EXT4=y diff --git a/configs/efi-x86_app_defconfig b/configs/efi-x86_app_defconfig index 790268a1ff..5252659942 100644 --- a/configs/efi-x86_app_defconfig +++ b/configs/efi-x86_app_defconfig @@ -34,5 +34,6 @@ CONFIG_SYSCON=y # CONFIG_DM_ETH is not set CONFIG_DEBUG_EFI_CONSOLE=y # CONFIG_REGEX is not set +# CONFIG_GZIP is not set CONFIG_EFI=y # CONFIG_EFI_LOADER is not set diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index f3ee5284d5..0f5f787707 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -36,5 +36,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_PCI_PNP is not set +# CONFIG_GZIP is not set CONFIG_EFI=y CONFIG_EFI_STUB=y diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index b83e609966..dafad67e7e 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -36,6 +36,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_PCI_PNP is not set +# CONFIG_GZIP is not set CONFIG_EFI=y CONFIG_EFI_STUB=y CONFIG_EFI_STUB_64BIT=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 4e2a23f638..612fbacf99 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -45,3 +45,4 @@ CONFIG_CPU=y CONFIG_SPI=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y +# CONFIG_GZIP is not set diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index f0893ce08e..58778e670c 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_BMP=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_CLS=y diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig index 3cae981a61..4e22a02aac 100644 --- a/configs/giedi_defconfig +++ b/configs/giedi_defconfig @@ -36,13 +36,16 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_CMD_CPU=y +# CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set CONFIG_CMD_CLK=y CONFIG_CMD_DM=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index 7e394d9aec..0d1a46315b 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -23,7 +23,10 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +# CONFIG_CMD_MDIO is not set CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-gurnard" diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 8d862696ca..0401effee6 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -51,3 +51,4 @@ CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y +CONFIG_BZIP2=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 639cb99862..64388f1044 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -40,6 +40,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 +CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 67ea57c7fc..30aea0232b 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -40,6 +40,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 +CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index f6e85b680b..deb879cd49 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -42,6 +42,7 @@ CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL_NAND_OFS=0x1100000 CONFIG_CMD_SPL_WRITE_SIZE=0x20000 +CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/hsdk_4xd_defconfig b/configs/hsdk_4xd_defconfig index 5fe6f75006..a6c9177372 100644 --- a/configs/hsdk_4xd_defconfig +++ b/configs/hsdk_4xd_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CLK_FREQ=500000000 CONFIG_DEBUG_UART=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" +CONFIG_BOARD_LATE_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y diff --git a/configs/hsdk_defconfig b/configs/hsdk_defconfig index 4b767169fc..30c9402de6 100644 --- a/configs/hsdk_defconfig +++ b/configs/hsdk_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_CLK_FREQ=500000000 CONFIG_DEBUG_UART=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" +CONFIG_BOARD_LATE_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index fea69d32e9..ac7a794afe 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -44,3 +44,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y +CONFIG_BZIP2=y diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index 4281aa93bc..d5a0ecada0 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -39,3 +39,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y +CONFIG_BZIP2=y diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index 7c4913debd..f1ad86566b 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_BOUNCE_BUFFER=y CONFIG_SPL_OS_BOOT=y +CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 7b13e1fd78..7e55996065 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -29,6 +29,7 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl-mipi> " +CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 4b2e1f4780..19b5e1a890 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -32,6 +32,7 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " +CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index a224baf639..5f356b2d06 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -26,6 +26,7 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl-rqs> " +CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 7472bad9e6..871f784b49 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -14,12 +14,21 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_HUSH_PARSER=y # CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +# CONFIG_CMD_MDIO is not set +CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT2=y diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig index 045d204897..5364b58b7b 100644 --- a/configs/imx8mq_phanbell_defconfig +++ b/configs/imx8mq_phanbell_defconfig @@ -19,9 +19,16 @@ CONFIG_SD_BOOT=y CONFIG_SPL_BOARD_INIT=y CONFIG_HUSH_PARSER=y # CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT2=y diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig index 428c7c47cd..dc490bcf57 100644 --- a/configs/imx8qm_mek_defconfig +++ b/configs/imx8qm_mek_defconfig @@ -30,7 +30,9 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set CONFIG_CMD_CLK=y CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig index 35191447ae..305c4e827c 100644 --- a/configs/imx8qm_rom7720_a1_4G_defconfig +++ b/configs/imx8qm_rom7720_a1_4G_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_CPU=y # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_CLK=y CONFIG_CMD_DM=y +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index 4cc37f5de7..9a31fb8e80 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -29,7 +29,9 @@ CONFIG_SPL_POWER_DOMAIN=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set CONFIG_CMD_CLK=y CONFIG_CMD_DM=y CONFIG_CMD_FUSE=y diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig index 07ba4d6472..53f880714c 100644 --- a/configs/ls1012a2g5rdb_qspi_defconfig +++ b/configs/ls1012a2g5rdb_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012a2g5rdb_tfa_defconfig b/configs/ls1012a2g5rdb_tfa_defconfig index 8999d01f66..f7d2354abf 100644 --- a/configs/ls1012a2g5rdb_tfa_defconfig +++ b/configs/ls1012a2g5rdb_tfa_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index 541cbb07ce..715863bb67 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig index b5043d7a18..fa6862cba5 100644 --- a/configs/ls1012afrdm_tfa_defconfig +++ b/configs/ls1012afrdm_tfa_defconfig @@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig index f105aaf2bc..0639db959c 100644 --- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig index 492276439e..02e32a74a3 100644 --- a/configs/ls1012afrwy_qspi_defconfig +++ b/configs/ls1012afrwy_qspi_defconfig @@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig index 9c89064150..f46477afe7 100644 --- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig index 2948fd57ec..32e410a2a4 100644 --- a/configs/ls1012afrwy_tfa_defconfig +++ b/configs/ls1012afrwy_tfa_defconfig @@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index 65e8e5c791..bbd1419eae 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -25,6 +25,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig index 529cd08b12..e5dd45c30c 100644 --- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig @@ -23,6 +23,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig index 79d196c77b..2c803a8058 100644 --- a/configs/ls1012aqds_tfa_defconfig +++ b/configs/ls1012aqds_tfa_defconfig @@ -25,6 +25,7 @@ CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index 1483e64d8c..6db9a26018 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index e39de4caf5..dbca32ea10 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig index 8b67798429..1323c0a982 100644 --- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig index e0d203d442..6cd8f6577c 100644 --- a/configs/ls1012ardb_tfa_defconfig +++ b/configs/ls1012ardb_tfa_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig index cb73a04b35..85ceeb480a 100644 --- a/configs/ls1021aiot_qspi_defconfig +++ b/configs/ls1021aiot_qspi_defconfig @@ -11,9 +11,15 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_MISC_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +# CONFIG_CMD_MDIO is not set CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index 10b6930914..11ccf57aad 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -16,9 +16,15 @@ CONFIG_SPL_FSL_PBL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +# CONFIG_CMD_MDIO is not set CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 224321810a..1b2e2e082f 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -31,6 +31,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_IMLS=y +CONFIG_CMD_SPL=y CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index bf557d7650..e13d5e349e 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -30,6 +30,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_IMLS=y +CONFIG_CMD_SPL=y CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index 61e05ceda6..d06fafde8d 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -18,15 +18,19 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index e51fdcab20..d8ae560744 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -20,14 +20,18 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index f7d0c15707..d65cef8e55 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -21,14 +21,18 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 57e706a4c4..a64cf136f5 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -29,15 +29,19 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index 4ff7173369..e9750cfae0 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -31,14 +31,18 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig index c184843a6d..d685e8f190 100644 --- a/configs/ls1088aqds_tfa_defconfig +++ b/configs/ls1088aqds_tfa_defconfig @@ -24,15 +24,19 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index f00307f964..31d66ecd17 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -21,15 +21,19 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 0572c9c241..3071c76f27 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -22,15 +22,19 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 3e00a25857..560f09b961 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -33,15 +33,19 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index b6e21b2756..b80a6a48a2 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -32,15 +32,19 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index dba4526734..c90c8a8151 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -24,14 +24,18 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index 53b236ce9e..828ee5ccf2 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -25,15 +25,19 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 2750747ece..9e18fb3de0 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -18,6 +18,7 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_LATE_INIT=y CONFIG_BOUNCE_BUFFER=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_FIT_IMAGE_TINY=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 6c72a5183f..c7a00e4651 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -19,6 +19,7 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_LATE_INIT=y CONFIG_BOUNCE_BUFFER=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 127fd5d53e..40ed9e4120 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -62,3 +62,4 @@ CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11B=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig index aa08e100a2..ffcab918e6 100644 --- a/configs/mx25pdk_defconfig +++ b/configs/mx25pdk_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg" CONFIG_DEFAULT_FDT_FILE="imx25-pdk.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_FUSE=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 0b6564ce5c..1dca2455c8 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -17,9 +17,11 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_MISC_INIT_R=y +CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y +CONFIG_CMD_FUSE=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig index 8b5e0ff9b1..ed24b7996b 100644 --- a/configs/mx6memcal_defconfig +++ b/configs/mx6memcal_defconfig @@ -33,6 +33,7 @@ CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x10000000 CONFIG_SYS_MEMTEST_END=0x20000000 +# CONFIG_CMD_FUSE is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_CACHE=y diff --git a/configs/mx7ulp_com_defconfig b/configs/mx7ulp_com_defconfig index e986355c20..05685f7073 100644 --- a/configs/mx7ulp_com_defconfig +++ b/configs/mx7ulp_com_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_READ=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com" diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index 680445bea7..6908aeb2cc 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -18,6 +18,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig index b70c36c7c9..4cc7cca349 100644 --- a/configs/mx7ulp_evk_plugin_defconfig +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -16,6 +16,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index 7a864bddf3..62edcd83f3 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -41,4 +41,5 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y +CONFIG_BZIP2=y CONFIG_OF_LIBFDT=y diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig index 5e5bbb05bd..52cebd9e22 100644 --- a/configs/pfla02_defconfig +++ b/configs/pfla02_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -# CONFIG_CMD_NAND is not set +CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig index 470fd3a355..2eeec09f1b 100644 --- a/configs/pico-imx8mq_defconfig +++ b/configs/pico-imx8mq_defconfig @@ -14,12 +14,20 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_HUSH_PARSER=y # CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT2=y diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 4e8eab531c..90d287b7b0 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -60,3 +60,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_USER=y CONFIG_FRAMEBUFFER_VESA_MODE=0x144 CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 565f232b4f..4309c2352d 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -44,3 +44,4 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_USER=y CONFIG_FRAMEBUFFER_VESA_MODE=0x144 CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/s32v234evb_defconfig b/configs/s32v234evb_defconfig index 78450c23d6..f687de4ef8 100644 --- a/configs/s32v234evb_defconfig +++ b/configs/s32v234evb_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc7c00000 CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index d350429cad..39939ccf60 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -50,3 +50,4 @@ CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y +CONFIG_BZIP2=y diff --git a/configs/slimbootloader_defconfig b/configs/slimbootloader_defconfig index 4a4fb1100d..dce540342b 100644 --- a/configs/slimbootloader_defconfig +++ b/configs/slimbootloader_defconfig @@ -21,3 +21,4 @@ CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_PCI_PNP is not set CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig index 4d7accc7c4..854381d6e7 100644 --- a/configs/som-db5800-som-6867_defconfig +++ b/configs/som-db5800-som-6867_defconfig @@ -57,3 +57,4 @@ CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/somlabs_visionsom_6ull_defconfig b/configs/somlabs_visionsom_6ull_defconfig index 08469d68b6..f8c9e1fb3e 100644 --- a/configs/somlabs_visionsom_6ull_defconfig +++ b/configs/somlabs_visionsom_6ull_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x88000000 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/stih410-b2260_defconfig b/configs/stih410-b2260_defconfig index 0b18971087..8257fb2b33 100644 --- a/configs/stih410-b2260_defconfig +++ b/configs/stih410-b2260_defconfig @@ -11,6 +11,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAS1,115200 CONSOLE=/dev/ttyAS1 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mem=992M@0x40000000 vmalloc=256m" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="stih410-b2260 => " +CONFIG_CMD_ASKENV=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index be030bfb37..58e854aea0 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_LATE_INIT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig index 09fbcc968f..0cda06e1af 100644 --- a/configs/stm32f769-disco_defconfig +++ b/configs/stm32f769-disco_defconfig @@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_LATE_INIT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/stm32h743-disco_defconfig b/configs/stm32h743-disco_defconfig index 21ea90a2c1..1d94032ef0 100644 --- a/configs/stm32h743-disco_defconfig +++ b/configs/stm32h743-disco_defconfig @@ -10,6 +10,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_DEFAULT_FDT_FILE="stm32h743i-disco" +CONFIG_BOARD_LATE_INIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/stm32h743-eval_defconfig b/configs/stm32h743-eval_defconfig index 432fce0181..6fd8cd84d4 100644 --- a/configs/stm32h743-eval_defconfig +++ b/configs/stm32h743-eval_defconfig @@ -10,6 +10,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_DEFAULT_FDT_FILE="stm32h743i-eval" +CONFIG_BOARD_LATE_INIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index db6077c11b..242ebf89e1 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -48,6 +48,7 @@ CONFIG_PHY_XILINX=y CONFIG_MII=y CONFIG_ZYNQ_GEM=y CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig index 7a8feee521..7a125751da 100644 --- a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig @@ -37,6 +37,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y +CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_EXT2=y @@ -65,3 +66,4 @@ CONFIG_USB_ETHER_RTL8152=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_114=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/theadorable-x86-conga-qa3-e3845_defconfig b/configs/theadorable-x86-conga-qa3-e3845_defconfig index dbbac6b103..9afad6a16b 100644 --- a/configs/theadorable-x86-conga-qa3-e3845_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845_defconfig @@ -36,6 +36,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y +CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_EXT2=y @@ -64,3 +65,4 @@ CONFIG_USB_ETHER_RTL8152=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_114=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig index de9701afe6..ee83584b4a 100644 --- a/configs/theadorable-x86-dfi-bt700_defconfig +++ b/configs/theadorable-x86-dfi-bt700_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y +CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_EXT2=y @@ -61,3 +62,4 @@ CONFIG_USB_ETHER_RTL8152=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_114=y CONFIG_CONSOLE_SCROLL_LINES=5 +# CONFIG_GZIP is not set diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index 17aa6a0206..21d152aea9 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -27,6 +27,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index f50d12d154..721ed3f8a6 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -26,7 +26,6 @@ CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x18000000 CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -49,6 +48,7 @@ CONFIG_SF_DEFAULT_SPEED=108000000 CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index d2fe64ed9e..56981bb736 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -26,7 +26,6 @@ CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x18000000 CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -49,6 +48,7 @@ CONFIG_SF_DEFAULT_SPEED=108000000 CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 9afd7f6bca..129c8f657d 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -26,7 +26,6 @@ CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x18000000 CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -49,6 +48,7 @@ CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set # CONFIG_NETDEVICES is not set CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig index f9d37b1365..8854e8f1af 100644 --- a/configs/tplink_wdr4300_defconfig +++ b/configs/tplink_wdr4300_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_MEMTEST_END=0x83f00000 CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +# CONFIG_CMD_MDIO is not set CONFIG_CMD_PING=y # CONFIG_ISO_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300" diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 9e6a0c1e7a..c46eed5ae3 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -17,6 +17,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 +CONFIG_CMD_SPL=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/wb45n_defconfig b/configs/wb45n_defconfig index d2de463aaa..5728cfb454 100644 --- a/configs/wb45n_defconfig +++ b/configs/wb45n_defconfig @@ -40,4 +40,5 @@ CONFIG_NAND_ATMEL=y CONFIG_PMECC_CAP=4 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_LZMA=y +CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/x530_defconfig b/configs/x530_defconfig index 67c8fbf663..de077cb71f 100644 --- a/configs/x530_defconfig +++ b/configs/x530_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -43,6 +44,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530" CONFIG_ENV_ADDR=0x100000 CONFIG_SPL_OF_TRANSLATE=y @@ -62,7 +65,6 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_SST=y -CONFIG_MTD_UBI=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_MVEBU=y diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index a3b71ccc3e..6ad53b798a 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -54,4 +54,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_MMC is not set +CONFIG_ARM_DCC=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index e25077b000..99880d80de 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -52,5 +52,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_FAT_WRITE=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 3b477ad103..c1b27d3b54 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -52,5 +52,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_FAT_WRITE=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index b629f8ba69..4ed14f7030 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -69,6 +69,7 @@ CONFIG_PHY_FIXED=y CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_ZYNQ_GEM=y +CONFIG_ARM_DCC=y CONFIG_PL01X_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index 375d54cbad..5da7440af2 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -88,6 +88,7 @@ CONFIG_PHY_REALTEK=y CONFIG_PHY_XILINX=y CONFIG_MII=y CONFIG_ZYNQ_GEM=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_ZYNQ_SPI=y CONFIG_ZYNQ_QSPI=y diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig index c28efa3582..4305db4058 100644 --- a/configs/xilinx_zynqmp_mini_defconfig +++ b/configs/xilinx_zynqmp_mini_defconfig @@ -52,5 +52,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_MMC is not set +CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index cb2983d247..b041b40b84 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -55,5 +55,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index f7bec364c3..bd5603a6a1 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -55,5 +55,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig index 01e0971991..4f4efa0cfa 100644 --- a/configs/xilinx_zynqmp_mini_nand_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_defconfig @@ -51,5 +51,7 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ARASAN=y CONFIG_SYS_NAND_MAX_CHIPS=2 +CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig index 20e76cb11e..3f780f746c 100644 --- a/configs/xilinx_zynqmp_mini_nand_single_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig @@ -50,5 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ARASAN=y +CONFIG_ARM_DCC=y CONFIG_PANIC_HANG=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index c6e03cd256..1f36f5c8e9 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -60,7 +60,9 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_ARM_DCC=y CONFIG_SPI=y CONFIG_ZYNQMP_GQSPI=y CONFIG_PANIC_HANG=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 57be5a49f6..7886d5a38f 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -116,6 +116,7 @@ CONFIG_MII=y CONFIG_ZYNQ_GEM=y CONFIG_SCSI=y CONFIG_DM_SCSI=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_SERIAL=y CONFIG_SPI=y CONFIG_ZYNQ_SPI=y diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index 6a01da2e4e..0c05a73a57 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -56,4 +56,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ZYNQ=y +CONFIG_ARM_DCC=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index 7b18ba3cd5..abf9401313 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -59,4 +59,6 @@ CONFIG_FLASH_CFI_DRIVER=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y +CONFIG_ARM_DCC=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index 15d8473b27..6ef0e23110 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -69,5 +69,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DEBUG_UART_ARM_DCC=y +CONFIG_ARM_DCC=y CONFIG_ZYNQ_QSPI=y +# CONFIG_GZIP is not set # CONFIG_EFI_LOADER is not set diff --git a/doc/README.commands b/doc/README.commands index 716ad227aa..229f86d8fb 100644 --- a/doc/README.commands +++ b/doc/README.commands @@ -134,3 +134,53 @@ by writing in u-boot.lds ($(srctree)/board/boardname/u-boot.lds) these .u_boot_list : { KEEP(*(SORT(.u_boot_list*))); } + +Writing tests +------------- + +All new commands should have tests. Tests for existing commands are very +welcome. + +It is fairly easy to write a test for a command. Enable it in sandbox, and +then add code that runs the command and checks the output. + +Here is an example: + +/* Test 'acpi items' command */ +static int dm_test_acpi_cmd_items(struct unit_test_state *uts) +{ + struct acpi_ctx ctx; + void *buf; + + buf = malloc(BUF_SIZE); + ut_assertnonnull(buf); + + ctx.current = buf; + ut_assertok(acpi_fill_ssdt(&ctx)); + console_record_reset(); + run_command("acpi items", 0); + ut_assert_nextline("dev 'acpi-test', type 1, size 2"); + ut_assert_nextline("dev 'acpi-test2', type 1, size 2"); + ut_assert_console_end(); + + ctx.current = buf; + ut_assertok(acpi_inject_dsdt(&ctx)); + console_record_reset(); + run_command("acpi items", 0); + ut_assert_nextline("dev 'acpi-test', type 2, size 2"); + ut_assert_nextline("dev 'acpi-test2', type 2, size 2"); + ut_assert_console_end(); + + console_record_reset(); + run_command("acpi items -d", 0); + ut_assert_nextline("dev 'acpi-test', type 2, size 2"); + ut_assert_nextlines_are_dump(2); + ut_assert_nextline("%s", ""); + ut_assert_nextline("dev 'acpi-test2', type 2, size 2"); + ut_assert_nextlines_are_dump(2); + ut_assert_nextline("%s", ""); + ut_assert_console_end(); + + return 0; +} +DM_TEST(dm_test_acpi_cmd_items, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 90e3983170..17d0e73623 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -189,6 +189,7 @@ choice config DEBUG_UART_ALTERA_JTAGUART bool "Altera JTAG UART" + depends on ALTERA_JTAG_UART help Select this to enable a debug UART using the altera_jtag_uart driver. You will need to provide parameters to make this work. The driver will @@ -196,6 +197,7 @@ config DEBUG_UART_ALTERA_JTAGUART config DEBUG_UART_ALTERA_UART bool "Altera UART" + depends on ALTERA_UART help Select this to enable a debug UART using the altera_uart driver. You will need to provide parameters to make this work. The driver will @@ -221,6 +223,7 @@ config DEBUG_ARC_SERIAL config DEBUG_UART_ATMEL bool "Atmel USART" + depends on ATMEL_USART help Select this to enable a debug UART using the atmel usart driver. You will need to provide parameters to make this work. The driver will @@ -236,6 +239,7 @@ config DEBUG_UART_BCM6345 config DEBUG_UART_NS16550 bool "ns16550" + depends on SYS_NS16550 help Select this to enable a debug UART using the ns16550 driver. You will need to provide parameters to make this work. The driver will @@ -252,6 +256,7 @@ config DEBUG_EFI_CONSOLE config DEBUG_UART_S5P bool "Samsung S5P" + depends on ARCH_EXYNOS || ARCH_S5PC1XX help Select this to enable a debug UART using the serial_s5p driver. You will need to provide parameters to make this work. The driver will @@ -267,6 +272,7 @@ config DEBUG_UART_MESON config DEBUG_UART_UARTLITE bool "Xilinx Uartlite" + depends on XILINX_UARTLITE help Select this to enable a debug UART using the serial_uartlite driver. You will need to provide parameters to make this work. The driver will @@ -274,6 +280,7 @@ config DEBUG_UART_UARTLITE config DEBUG_UART_ARM_DCC bool "ARM DCC" + depends on ARM_DCC help Select this to enable a debug UART using the ARM JTAG DCC port. The DCC port can be used for very early debugging and doesn't require @@ -285,6 +292,7 @@ config DEBUG_UART_ARM_DCC config DEBUG_MVEBU_A3700_UART bool "Marvell Armada 3700" + depends on MVEBU_A3700_UART help Select this to enable a debug UART using the serial_mvebu driver. You will need to provide parameters to make this work. The driver will @@ -292,6 +300,7 @@ config DEBUG_MVEBU_A3700_UART config DEBUG_UART_ZYNQ bool "Xilinx Zynq" + depends on ZYNQ_SERIAL help Select this to enable a debug UART using the serial_zynq driver. You will need to provide parameters to make this work. The driver will @@ -307,6 +316,7 @@ config DEBUG_UART_APBUART config DEBUG_UART_PL010 bool "pl010" + depends on PL01X_SERIAL help Select this to enable a debug UART using the pl01x driver with the PL010 UART type. You will need to provide parameters to make this @@ -315,6 +325,7 @@ config DEBUG_UART_PL010 config DEBUG_UART_PL011 bool "pl011" + depends on PL011_SERIAL help Select this to enable a debug UART using the pl01x driver with the PL011 UART type. You will need to provide parameters to make this @@ -348,6 +359,7 @@ config DEBUG_UART_SANDBOX config DEBUG_UART_SIFIVE bool "SiFive UART" + depends on PL01X_SERIAL help Select this to enable a debug UART using the serial_sifive driver. You will need to provide parameters to make this work. The driver will @@ -373,6 +385,7 @@ config DEBUG_UART_UNIPHIER config DEBUG_UART_OMAP bool "OMAP uart" + depends on OMAP_SERIAL help Select this to enable a debug UART using the omap ns16550 driver. You will need to provide parameters to make this work. The driver @@ -504,6 +517,12 @@ config ARC_SERIAL Select this to enable support for ARC UART now typically only used in Synopsys DesignWare ARC simulators like nSIM. +config ARM_DCC + bool "ARM Debug Communication Channel (DCC) as UART support" + depends on ARM + help + Select this to enable using the ARM DCC as a form of UART. + config ATMEL_USART bool "Atmel USART support" help diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 065e1e9281..de7132940c 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -31,10 +31,6 @@ */ #undef CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 69e3fbae78..54f6fa7c16 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -24,10 +24,6 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text*); -/* - * Command line configuration. - */ - #ifdef CONFIG_IDE /* ATA */ # define CONFIG_IDE_RESET 1 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 5056629043..2cdd4369da 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -39,9 +39,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #ifdef CONFIG_MCFFEC # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index e7859f334a..6a50a25d32 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -36,9 +36,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #ifdef CONFIG_MCFFEC # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 788a325b64..eccbe58676 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -258,10 +258,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h index d8485f6fbd..e70b90765a 100644 --- a/include/configs/MPC8313ERDB_NAND.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -306,10 +306,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h index 029d2f1ec3..38245860ee 100644 --- a/include/configs/MPC8313ERDB_NOR.h +++ b/include/configs/MPC8313ERDB_NOR.h @@ -275,10 +275,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 2c35223868..da68f3ccca 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -304,10 +304,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index ff18d10872..eaa95bbeff 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -220,10 +220,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index bfcff2e4f8..d2d1b2fa47 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -244,10 +244,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0a80a60d30..4707dcf1ab 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -278,10 +278,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h index 79dd956174..d92312b408 100644 --- a/include/configs/MPC8349EMDS_SDRAM.h +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -333,10 +333,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 1254b4fc10..b5660f9ff5 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -304,10 +304,6 @@ extern int board_pci_host_broken(void); */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_MMC diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 8c2297a910..7ff0b77db5 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -322,10 +322,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_MMC diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 2ba7322021..f78782a1c1 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -288,10 +288,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index eb85141702..b2acc72973 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -391,10 +391,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_WATCHDOG /* watchdog enabled */ #define CONFIG_SYS_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 59404cbaf9..94cbe10dd3 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -485,10 +485,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index fcfd3b0b4b..9832f85405 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -249,10 +249,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 6e1a40c678..cf964373f0 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -15,9 +15,6 @@ #include <configs/ti_am335x_common.h> /* settings we don;t want on this board */ -#undef CONFIG_CMD_SPI - -#define CONFIG_CMD_CACHE #ifndef CONFIG_SPL_BUILD # define CONFIG_TIMESTAMP diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index fea9300a67..e94b7c8d21 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -40,7 +40,6 @@ DFU_ALT_INFO_RAM \ DFU_ALT_INFO_QSPI #else -#undef CONFIG_CMD_BOOTD #ifdef CONFIG_SPL_DFU #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 #define DFUARGS \ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 8ca571b9b7..965259c5e1 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -143,8 +143,6 @@ #undef CONFIG_SYS_MAXARGS #define CONFIG_SYS_MAXARGS 32 -#define CONFIG_CMD_TIME - #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 6f03058a78..d5a0625e02 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -82,10 +82,6 @@ #define CONFIG_ENV_OVERWRITE /* Command definition */ -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FLASH #undef CONFIG_IPADDR #define CONFIG_IPADDR 192.168.10.2 @@ -234,6 +230,4 @@ #define CONFIG_SYS_MMC_ENV_PART 1 #endif -#define CONFIG_CMD_TIME - #endif /* __CONFIG_H */ diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index 717ed53d83..88e1bf1775 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -23,13 +23,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -/* - * Commands configuration - */ -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 7eec226173..891240c7e2 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -38,7 +38,6 @@ #error No card type defined! #endif -/* Command line configuration */ /* * CONFIG_RAM defines if u-boot is loaded via BDM (or started from * a different bootloader that has already performed RAM setup) or diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 6e9793ab81..624b05ad08 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -29,10 +29,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #ifdef CONFIG_SD_BOOT #ifdef CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 37b9cc3b6f..378f9dc48b 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -101,10 +101,6 @@ #define CONFIG_USART_ID 0/* ignored in arm */ /* - * Command line configuration. - */ - -/* * Network Driver Setting */ #define CONFIG_DRIVER_AT91EMAC diff --git a/include/configs/bcm7260.h b/include/configs/bcm7260.h index 3bd85ffe28..31fd6ec08b 100644 --- a/include/configs/bcm7260.h +++ b/include/configs/bcm7260.h @@ -33,6 +33,4 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 0 -#define CONFIG_CMD_GPT - #endif /* __CONFIG_H */ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 5f6bf62524..24569f7d94 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -127,9 +127,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Command configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* * Flash configuration. @@ -142,9 +139,6 @@ extern phys_addr_t prior_stage_fdt_address; * Filesystem configuration. */ #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT4 -#define CONFIG_FS_EXT4 -#define CONFIG_CMD_FS_GENERIC /* * Environment configuration. @@ -166,6 +160,5 @@ extern phys_addr_t prior_stage_fdt_address; * Set fdtaddr to prior stage-provided DTB in board_late_init, when * writeable environment is available. */ -#define CONFIG_BOARD_LATE_INIT #endif /* __BCMSTB_H */ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index fd29c5d0f1..f048f158ed 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -42,8 +42,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 3000 #define CONFIG_SYS_FLASH_LOCK_TOUT 3000 #define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000 -#undef CONFIG_CMD_SF -#undef CONFIG_CMD_SPI #endif /* Board Clock */ diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h index 459712190a..35f4b74727 100644 --- a/include/configs/caddy2.h +++ b/include/configs/caddy2.h @@ -208,9 +208,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #define CONFIG_SYS_RTC_BUS_NUM 0x01 #define CONFIG_SYS_I2C_RTC_ADDR 0x32 diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 2ad54f4907..c671cb50af 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -45,12 +45,7 @@ #define CONFIG_BOARD_EARLY_INIT_F /* Commands */ -#define CONFIG_CMD_READ -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_CRC32 #undef CONFIG_BOOTM_NETBSD /* ENET Config */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index e6b4e233d6..67f5bbe9d8 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_OVERWRITE -/* Command line configuration. */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index b923bae9b2..07f1893d11 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -15,8 +15,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) -#define CONFIG_BOARD_LATE_INIT - /* Network */ #define CONFIG_FEC_MXC #define CONFIG_FEC_XCV_TYPE RGMII @@ -44,7 +42,6 @@ #define CONFIG_SYS_I2C_EEPROM_BUS SYS_I2C_BUS_SOM #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X #define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 459e0d9d5e..74be2f1378 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -20,10 +20,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* - * Commands configuration - */ - -/* * SDIO/MMC Card Configuration */ #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index fe23c2396c..c859616c68 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -95,10 +95,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #ifdef CONFIG_MCFFEC # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 3d248ef4ef..6beef25094 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -70,10 +70,6 @@ #define CONFIG_ENV_OVERWRITE /* Command definition */ -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FLASH #undef CONFIG_IPADDR #define CONFIG_IPADDR 192.168.10.2 @@ -213,6 +209,4 @@ #define CONFIG_SYS_MMC_ENV_PART 1 #endif -#define CONFIG_CMD_TIME - #endif /* __CONFIG_H */ diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 34d268e061..823586cc09 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -276,10 +276,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #endif -/* - * Command line configuration. - */ - #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #ifndef CONFIG_TRAILBLAZER diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index a326a1c83d..00e5c8f794 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -13,7 +13,6 @@ #define CONFIG_CUSTOMER_BOARD_SUPPORT #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_BOARD_LATE_INIT /* * TEXT_BASE needs to be below 16MiB, since this area is scrubbed diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 0735ab2215..213883ef0f 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -17,10 +17,6 @@ */ #define CONFIG_SYS_TCLK 200000000 /* 200MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index f06853b74e..fe9a7ab563 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -12,10 +12,6 @@ #define CONFIG_SYS_TCLK 200000000 /* 200MHz */ -/* - * Commands configuration - */ - /* USB/EHCI configuration */ #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 26c2240dbe..d4207be1d3 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -12,10 +12,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index efb3cfee35..5bfdf4044b 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -32,8 +32,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_BZIP2 - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M) diff --git a/include/configs/display5.h b/include/configs/display5.h index 6600b94ac3..2e5dbfedc8 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -10,9 +10,7 @@ #include "mx6_common.h" /* Falcon Mode */ -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (44 * SZ_1K) /* Falcon Mode - MMC support */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x3F00 diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 41079e8345..62107625e2 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -24,14 +24,6 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index fbe431b9c9..14cd82f5a3 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -48,7 +48,6 @@ #endif #ifdef CONFIG_SPL_BUILD -#undef CONFIG_CMD_BOOTD #ifdef CONFIG_SPL_DFU #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 #define DFUARGS \ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 3e3f4c17f8..09bac01779 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -17,14 +17,6 @@ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG -/* - * Commands configuration - */ - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-plug-common.h" /* diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 594cc82234..1f033ababf 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -19,15 +19,6 @@ */ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -/* - * Commands configuration - */ -#define CONFIG_CMD_EXT2 - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-plug-common.h" /* diff --git a/include/configs/ds414.h b/include/configs/ds414.h index b179b99468..a92e788a38 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -17,10 +17,6 @@ */ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index d441f28d4a..3dab93418a 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -43,10 +43,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_MCFTMR #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index cfee974045..9de054306f 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -104,9 +104,6 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ -/* - * Commands configuration - */ /* * Network diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index e40be93ca7..47c5974b2e 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -168,7 +168,6 @@ #define CONFIG_HIDE_LOGO_VERSION #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_CMD_BMP #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index afd48d5ad0..51325047ec 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -37,14 +37,6 @@ #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 2f66af3447..a0554d7f8e 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -29,10 +29,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -/* - * Commands configuration - */ - /* Network configuration */ #ifdef CONFIG_CMD_NET #define CONFIG_ARMADA100_FEC diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 768f4ebcbb..1e1e5da4d5 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -17,7 +17,6 @@ /* * Standard filesystems */ -#define CONFIG_BZIP2 /* * mv-plug-common.h should be defined after CMD configs since it used them diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index bf4b3b297e..5b8f2420d6 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -102,7 +102,6 @@ #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ -#define CONFIG_CMD_UNZIP /* gzwrite */ /* Ethernet support */ #define CONFIG_FEC_MXC diff --git a/include/configs/helios4.h b/include/configs/helios4.h index 671c3d291d..31e2e78b62 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -21,10 +21,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* - * Commands configuration - */ - -/* * SDIO/MMC Card Configuration */ #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 76add4eba8..bdbaa475d2 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -30,10 +30,6 @@ #define CONFIG_CALXEDA_XGMAC -/* - * Command line configuration. - */ - #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 2732c019c4..70cd682ca9 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -55,8 +55,6 @@ #define CONFIG_HIKEY_GPIO -/* Command line configuration */ - /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 76c4ee9777..ea8d54a307 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -355,10 +355,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/hsdk-4xd.h b/include/configs/hsdk-4xd.h index 4628108075..5678f0a77b 100644 --- a/include/configs/hsdk-4xd.h +++ b/include/configs/hsdk-4xd.h @@ -115,6 +115,5 @@ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0" /* * Callback configuration */ -#define CONFIG_BOARD_LATE_INIT #endif /* _CONFIG_HSDK_H_ */ diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index 7735cc1720..3cc3b8c0ae 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -114,6 +114,5 @@ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0" /* * Callback configuration */ -#define CONFIG_BOARD_LATE_INIT #endif /* _CONFIG_HSDK_H_ */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 71738bfb7d..41483a2f7e 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -15,19 +15,6 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Compression configuration - */ -#define CONFIG_BZIP2 - -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index a694b2e92b..c99490b85d 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -20,19 +20,6 @@ */ #define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT -/* - * Compression configuration - */ -#define CONFIG_BZIP2 - -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 72ae89c5f6..4c7a0cb0bb 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -159,9 +159,7 @@ #ifdef CONFIG_SPL_OS_BOOT # define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" # define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -# define CONFIG_CMD_SPL # define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -# define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* MMC support: args@1MB kernel@2MB */ # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h index d4a613d0ad..d70c6dbc23 100644 --- a/include/configs/imx6dl-mamoj.h +++ b/include/configs/imx6dl-mamoj.h @@ -60,9 +60,7 @@ /* Falcon */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* MMC support: args@1MB kernel@2MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 94183269cd..f71efd45ab 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -59,20 +59,10 @@ #define CONFIG_REMAKE_ELF #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_ETHPRIME "FEC" @@ -209,8 +199,6 @@ #define CONFIG_MXC_GPIO -#define CONFIG_CMD_FUSE - /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 72edbc74ec..6d038f21b7 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -57,18 +57,9 @@ #define CONFIG_BOARD_EARLY_INIT_F -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_ETHPRIME "FEC" @@ -200,8 +191,6 @@ #define CONFIG_MXC_GPIO -#define CONFIG_CMD_FUSE - /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index d7dd3e21a3..8324767eb5 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -40,12 +40,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_BOARD_SETUP -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index eebb8dc011..89d7adabea 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -30,7 +30,6 @@ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* FUSE command */ -#define CONFIG_CMD_FUSE /* Boot M4 */ #define M4_BOOT_ENV \ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index a2046e1beb..a58f68c17e 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -40,12 +40,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_BOARD_SETUP -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -189,8 +183,6 @@ #ifndef CONFIG_DM_PCA953X #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO #endif /* Networking */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index f15e08f397..cc18347ff6 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -24,9 +24,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #define CONFIG_BOOTCOMMAND "" /* Flash settings */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index d8a474db2e..c4203ce57e 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -27,9 +27,6 @@ #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY -/* - * Command line configuration. - */ #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index 869e0ad6b8..86cc4b6d30 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_CMD_MEMINFO /* MMC */ #ifdef CONFIG_MMC @@ -30,7 +29,6 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_CMD_MEMINFO #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 54ea43420f..f8cb97bd12 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -13,7 +13,6 @@ #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 -#define CONFIG_CMD_MEMINFO #ifndef CONFIG_SPL_BUILD #undef BOOT_TARGET_DEVICES @@ -70,6 +69,4 @@ #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" #endif -#define CONFIG_CMD_MEMINFO - #endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 1ea6548015..2e20e11377 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -21,7 +21,6 @@ #define SYS_SDRAM_SIZE_512 0x20000000 #define SYS_SDRAM_SIZE_1024 0x40000000 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 -#define CONFIG_CMD_MEMINFO /* ENV */ #define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 @@ -114,7 +113,6 @@ #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ "env exists secureboot && esbc_halt;" #endif -#define CONFIG_CMD_MEMINFO #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 99840dcfc4..9498a03f40 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_CMD_MEMINFO /* * QIXIS Definitions @@ -104,7 +103,5 @@ #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_MEMINFO - #include <asm/fsl_secure_boot.h> #endif /* __LS1012AQDS_H__ */ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 8fb75650e2..7eb1ec9366 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -13,7 +13,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_CMD_MEMINFO /* * I2C IO expander @@ -49,8 +48,6 @@ #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_MEMINFO - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 6e94a2a4c9..59d65f8891 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -97,7 +97,6 @@ /* * I2C */ -#define CONFIG_CMD_I2C #ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C @@ -141,7 +140,6 @@ /* DM SPI */ #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) -#define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH #endif @@ -182,8 +180,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -#define CONFIG_CMD_MII - #define CONFIG_CMDLINE_TAG #define CONFIG_PEN_ADDR_BIG_ENDIAN @@ -205,9 +201,6 @@ */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MEMINFO - #define CONFIG_SYS_LOAD_ADDR 0x82000000 #define CONFIG_LS102XA_STREAM_ID diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index b91016987b..7bb740f48e 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -77,9 +77,6 @@ #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 0f289cb078..0745011326 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -59,9 +59,6 @@ #endif /* SATA */ -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 985f40412c..b18eab51ed 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -165,8 +165,6 @@ #endif #endif -/* Command line configuration */ - /* MMC */ #ifndef SPL_NO_MMC #ifdef CONFIG_MMC diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 4ad51f15cb..bfaa574fc9 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -35,7 +35,6 @@ #ifdef CONFIG_SD_BOOT #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x10000 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x500 @@ -275,9 +274,6 @@ /* SATA */ #ifndef SPL_NO_SATA -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 #define CONFIG_SYS_SCSI_MAX_LUN 2 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 24db23b3c3..8fe6937dfb 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -160,8 +160,6 @@ CONFIG_SYS_SCSI_MAX_LUN) #endif -/* Command line configuration */ - /* MMC */ #ifndef SPL_NO_MMC #ifdef CONFIG_MMC diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index a7373429ba..596f14bf3e 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -50,10 +50,6 @@ */ #define CPU_RELEASE_ADDR secondary_boot_func -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) @@ -143,8 +139,6 @@ unsigned long long get_qixis_addr(void); #if defined(CONFIG_FSL_MC_ENET) #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif -/* Command line configuration */ -#define CONFIG_CMD_CACHE /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 2bc910a3fc..1e9e6a8f96 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -29,7 +29,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 #else @@ -150,7 +149,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) @@ -367,8 +365,6 @@ unsigned long get_board_ddr_clk(void); #endif #endif -#define CONFIG_CMD_MEMINFO - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 475207358f..16e0486d40 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -16,7 +16,6 @@ #define CONFIG_QIXIS_I2C_ACCESS #endif #define SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #endif #define CONFIG_SYS_CLK_FREQ 100000000 @@ -121,7 +120,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) @@ -259,8 +257,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_CMD_MEMINFO - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index b58776a788..410872dfd8 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -149,8 +149,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif -/* Command line configuration */ - /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index faa74c613f..0c0ab2486e 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -32,14 +32,6 @@ #define CONFIG_KIRKWOOD_GPIO -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* loading initramfs images without uimage header */ diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 9cc13052cc..0c2185c529 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -17,10 +17,6 @@ */ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index ee942a48fc..0c383e94cc 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -28,7 +28,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) -#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configuration */ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index d6b21f11c3..74bfcee9f0 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -237,10 +237,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 683d442e75..a7be85422a 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -81,7 +81,6 @@ /* Fuse API support */ #define CONFIG_FSL_IIM -#define CONFIG_CMD_FUSE /* Ethernet Configs */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index c32f02635b..bb6d82d327 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -20,7 +20,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) -#define CONFIG_BOARD_LATE_INIT #define CONFIG_REVISION_TAG /* USB Configs */ @@ -144,7 +143,6 @@ /* FLASH and environment organization */ #define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_CMD_FUSE #define CONFIG_FSL_IIM #define CONFIG_BCH diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index 3d79a7e437..b774b167f6 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -13,11 +13,6 @@ #include "mx6_common.h" #include "imx6_spl.h" -#undef CONFIG_MMC -#undef CONFIG_SPL_MMC_SUPPORT -#undef CONFIG_GENERIC_MMC -#undef CONFIG_CMD_FUSE - #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) #define CONFIG_MXC_UART diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index f7f9404479..78bdfab5a6 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -88,9 +88,5 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -#define CONFIG_CMD_CACHE -#endif - #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 9216b0948c..942b7dd414 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -143,8 +143,4 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -#define CONFIG_CMD_CACHE -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 5251db9389..b95c7fc3be 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -37,14 +37,6 @@ #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index e59ef11e66..13812c43a1 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -15,15 +15,6 @@ #define CONFIG_KW88F6702 1 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* compression configuration */ -#define CONFIG_BZIP2 - -/* commands configuration */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* environment variables configuration */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 5c59cabc08..e9fd0fc749 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -20,14 +20,6 @@ #define CONFIG_KW88F6281 1 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h index 78a1a86431..d524f3cbcf 100644 --- a/include/configs/pdu001.h +++ b/include/configs/pdu001.h @@ -16,7 +16,6 @@ #define MACH_TYPE_PDU001 5075 #define CONFIG_MACH_TYPE MACH_TYPE_PDU001 -#define CONFIG_BOARD_LATE_INIT /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ diff --git a/include/configs/pfla02.h b/include/configs/pfla02.h index d4a7de7df6..4162a71ca6 100644 --- a/include/configs/pfla02.h +++ b/include/configs/pfla02.h @@ -41,15 +41,11 @@ #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */ #define CONFIG_SYS_I2C_SPEED 100000 -#ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_NAND /* Enable NAND support */ -#define CONFIG_CMD_NAND_TRIMFFS #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION -#endif /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index f4da38a7db..2ae13b30ee 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -55,20 +55,10 @@ #define CONFIG_REMAKE_ELF #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_ETHPRIME "FEC" @@ -181,8 +171,6 @@ #define CONFIG_MXC_GPIO -#define CONFIG_CMD_FUSE - /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 771fd8db97..2747c0cb93 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -57,10 +57,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - /* SDRAM */ #define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index bb24739a90..cbe5022297 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -24,14 +24,6 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/poplar.h b/include/configs/poplar.h index 81c7f251bc..2c7dc8bab6 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -52,7 +52,6 @@ BOOTENV -/* Command line configuration */ #define CONFIG_SYS_MMC_ENV_DEV 0 /* Monitor Command Prompt */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 4227a280c7..e96118a0cf 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -30,10 +30,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_NE2000_BASE 0xb4000300 diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 801ba76b3e..676e7c1a15 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -30,10 +30,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index cfbd472c82..03b08968f6 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -108,10 +108,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_LOADS_ECHO /* echo on for serial download */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 5821d21688..5c6692c199 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -35,7 +35,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* Config CACHE */ -#define CONFIG_CMD_CACHE #define CONFIG_SYS_FULL_VA @@ -68,12 +67,9 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_NUM 1 -/* #define CONFIG_CMD_EXT2 EXT2 Support */ - #if 0 /* Ethernet config */ -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RMII diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 7343201098..8e98254e2d 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* NAND flash */ -#undef CONFIG_CMD_NAND /* SPI flash */ diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 17028ca145..2d1ba757fe 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* NAND flash */ -#undef CONFIG_CMD_NAND /* SPI flash */ #define CONFIG_SF_DEFAULT_SPEED 66000000 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 484a15df79..2a81f3a9bc 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -8,7 +8,6 @@ #ifdef FTRACE #define CONFIG_TRACE -#define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) #define CONFIG_TRACE_EARLY_SIZE (16 << 20) #define CONFIG_TRACE_EARLY diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 55b9a3c182..5adf5a8ca4 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -232,10 +232,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index ed5e284077..e1f8fb8ac8 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -14,19 +14,6 @@ */ #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -/* - * Commands configuration - */ - -/* - * Standard filesystems - */ -#define CONFIG_BZIP2 - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-plug-common.h" /* diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index be36e9f586..fcd35b715c 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -99,8 +99,4 @@ /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -/* Command line configuration */ -#define CONFIG_CMD_MII -#define CONFIG_CMD_CACHE - #endif /* __CONFIG_H */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index 85c68cdee6..c3f81ff491 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -29,8 +29,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 1 #endif /* CONFIG_FSL_USDHC */ -#define CONFIG_CMD_READ - #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "console=ttymxc0\0" \ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index f393aa0264..169b9efeec 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -44,7 +44,6 @@ BOOTENV /* Extra Commands */ -#define CONFIG_CMD_ASKENV #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index a8b3a17309..9d029fbcc6 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -44,8 +44,4 @@ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ "bootm 0x08044000 - 0x08042000\0" -/* - * Command line configuration. - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index a7150312ca..8390535af0 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -51,8 +51,4 @@ "ramdisk_addr_r=0x00438000\0" \ BOOTENV -/* - * Command line configuration. - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f469-discovery.h b/include/configs/stm32f469-discovery.h index 8212fb63de..57fb6b25af 100644 --- a/include/configs/stm32f469-discovery.h +++ b/include/configs/stm32f469-discovery.h @@ -51,8 +51,4 @@ "ramdisk_addr_r=0x00438000\0" \ BOOTENV -/* - * Command line configuration. - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 529152f60c..f7a713dd22 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -58,10 +58,6 @@ "ramdisk_addr_r=0xC0438000\0" \ BOOTENV -/* - * Command line configuration. - */ -#define CONFIG_BOARD_LATE_INIT #define CONFIG_DISPLAY_BOARDINFO /* For SPL */ diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h index 39c93ee6f9..afc98ae791 100644 --- a/include/configs/stm32h743-disco.h +++ b/include/configs/stm32h743-disco.h @@ -45,9 +45,4 @@ "ramdisk_addr_r=0xD0438000\0" \ BOOTENV -/* - * Command line configuration. - */ -#define CONFIG_BOARD_LATE_INIT - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h index 8eb94c1ad4..66af8f50d9 100644 --- a/include/configs/stm32h743-eval.h +++ b/include/configs/stm32h743-eval.h @@ -45,9 +45,4 @@ "ramdisk_addr_r=0xD0438000\0" \ BOOTENV -/* - * Command line configuration. - */ -#define CONFIG_BOARD_LATE_INIT - #endif /* __CONFIG_H */ diff --git a/include/configs/strider.h b/include/configs/strider.h index 4ad3401c04..f860865b7c 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -388,10 +388,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 976d527a08..3da7ee7b3a 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -212,10 +212,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/tb100.h b/include/configs/tb100.h index ae54520696..f42b0df1cf 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -48,10 +48,6 @@ #define ETH1_BASE_ADDRESS 0xFE110000 /* - * Command line configuration - */ - -/* * Environment configuration */ #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index 0a1261fa20..141d4d61f8 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -19,7 +19,6 @@ #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP /* Environment settings */ diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 6d42ec1aa1..0e5bd0dbbf 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -18,10 +18,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* - * Commands configuration - */ - -/* * The debugging version enables USB support via defconfig. * This version should also enable all other non-production * interfaces / features. diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 1d3b2a3922..d16d61e5cd 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -28,8 +28,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_CMD_ASKENV - #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 0e4a824c42..6e3953835d 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -22,13 +22,6 @@ #define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -/* sspi command isn't useful */ -#undef CONFIG_CMD_SPI - -/* No useful gpio */ -#undef CONFIG_ZYNQ_GPIO -#undef CONFIG_CMD_GPIO - /* No falcon support */ #undef CONFIG_SPL_OS_BOOT #undef CONFIG_SPL_FPGA_SUPPORT diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index 75e7458067..f25f6dccb5 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -52,6 +52,4 @@ * Diagnostics */ -#define CONFIG_CMD_MII - #endif /* __CONFIG_H */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 81b171ea16..91249f2eb4 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -205,10 +205,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index c11507e550..3f578720e5 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -208,9 +208,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #define CONFIG_SYS_RTC_BUS_NUM 0x01 #define CONFIG_SYS_I2C_RTC_ADDR 0x32 diff --git a/include/configs/vyasa-rk3288.h b/include/configs/vyasa-rk3288.h index c3521cac41..4d8b4a03e1 100644 --- a/include/configs/vyasa-rk3288.h +++ b/include/configs/vyasa-rk3288.h @@ -29,9 +29,7 @@ /* Falcon Mode */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x0ffe5000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - MMC support: args@16MB kernel@17MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8000 /* 16MB */ diff --git a/include/configs/wb45n.h b/include/configs/wb45n.h index aecf2737f8..d256ce8e4b 100644 --- a/include/configs/wb45n.h +++ b/include/configs/wb45n.h @@ -50,7 +50,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 #define CONFIG_RBTREE -#define CONFIG_LZO /* Ethernet */ #define CONFIG_MACB diff --git a/include/configs/x530.h b/include/configs/x530.h index 9081f41660..7e0f2c24d9 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -32,11 +32,6 @@ #define CONFIG_CONS_INDEX 1 /*Console on UART0 */ -/* - * Commands configuration - */ -#define CONFIG_CMD_PCI - /* NAND */ #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -69,10 +64,6 @@ /* NAND */ #define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_LZO -#define CONFIG_CMD_MTDPARTS #define CONFIG_SYS_MALLOC_LEN (4 << 20) diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 016b797a53..bd62798d26 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -18,8 +18,6 @@ #define CONFIG_LMB -#undef CONFIG_ZLIB -#undef CONFIG_GZIP #define CONFIG_SYS_BOOTM_LEN (16 << 20) /* SATA AHCI storage */ @@ -43,10 +41,6 @@ */ #define CONFIG_SYS_NS16550_PORT_MAPPED -/*----------------------------------------------------------------------- - * Command line configuration. - */ - #ifndef CONFIG_BOOTCOMMAND #define CONFIG_BOOTCOMMAND \ "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index da640d6f14..1276612503 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -27,7 +27,6 @@ #endif /* Serial setup */ -#define CONFIG_ARM_DCC #define CONFIG_CPU_ARMV8 #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index ae7eca1155..0b201a2b4d 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -17,9 +17,6 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_ZLIB -#undef CONFIG_GZIP -#undef CONFIG_CMD_ENV /* BOOTP options */ #undef CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index b744a91fa6..e868c13416 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) /* Serial setup */ -#define CONFIG_ARM_DCC #define CONFIG_CPU_ARMV8 #define CONFIG_SYS_BAUDRATE_TABLE \ @@ -245,7 +244,6 @@ #endif #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) -# undef CONFIG_CMD_BOOTD # define CONFIG_SPL_ENV_SUPPORT # define CONFIG_SPL_HASH_SUPPORT # define CONFIG_ENV_MAX_ENTRIES 10 diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index 3078b9c55b..ae751aa395 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -19,9 +19,6 @@ #undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS #undef CONFIG_SYS_MALLOC_LEN -#undef CONFIG_ZLIB -#undef CONFIG_GZIP -#undef CONFIG_CMD_ENV #undef CONFIG_SYS_INIT_SP_ADDR /* BOOTP options */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index e76c5cbe6b..15bd97f210 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -52,14 +52,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* - * Additional command - */ - -/* * USB */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 9e83e17775..59e77f6ecc 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -33,8 +33,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#define CONFIG_ARM_DCC - /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h index 917f35b24c..0491cf5136 100644 --- a/include/configs/zynq_cse.h +++ b/include/configs/zynq_cse.h @@ -15,8 +15,6 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_ZLIB -#undef CONFIG_GZIP #undef CONFIG_SYS_CBSIZE diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index c2641bc995..edba365651 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -51,7 +51,7 @@ my %ignore_type = (); my @ignore = (); my $help = 0; my $configuration_file = ".checkpatch.conf"; -my $max_line_length = 80; +my $max_line_length = 100; my $ignore_perl_version = 0; my $minimum_perl_version = 5.10.0; my $min_conf_desc_length = 4; @@ -60,10 +60,9 @@ my $codespell = 0; my $codespellfile = "/usr/share/codespell/dictionary.txt"; my $conststructsfile = "$D/const_structs.checkpatch"; my $typedefsfile = ""; +my $u_boot = 0; my $color = "auto"; -my $allow_c99_comments = 1; # Can be overridden by --ignore C99_COMMENT_TOLERANCE -# git output parsing needs US English output, so first set backtick child process LANGUAGE -my $git_command ='export LANGUAGE=en_US.UTF-8; git'; +my $allow_c99_comments = 1; sub help { my ($exitcode) = @_; @@ -96,7 +95,9 @@ Options: --types TYPE(,TYPE2...) show only these comma separated message types --ignore TYPE(,TYPE2...) ignore various comma separated message types --show-types show the specific message type in the output - --max-line-length=n set the maximum line length, if exceeded, warn + --max-line-length=n set the maximum line length, (default $max_line_length) + if exceeded, warn on patches + requires --strict for use with --file --min-conf-desc-length=n set the min description length, if shorter, warn --root=PATH PATH to the kernel tree root --no-summary suppress the per-file summary @@ -123,6 +124,7 @@ Options: --typedefsfile Read additional types from this file --color[=WHEN] Use colors 'always', 'never', or only when output is a terminal ('auto'). Default is 'auto'. + --u-boot Run additional checks for U-Boot -h, --help, --version display this help and exit When FILE is - read standard input. @@ -227,6 +229,7 @@ GetOptions( 'codespell!' => \$codespell, 'codespellfile=s' => \$codespellfile, 'typedefsfile=s' => \$typedefsfile, + 'u-boot' => \$u_boot, 'color=s' => \$color, 'no-color' => \$color, #keep old behaviors of -nocolor 'nocolor' => \$color, #keep old behaviors of -nocolor @@ -470,19 +473,8 @@ our $logFunctions = qr{(?x: seq_vprintf|seq_printf|seq_puts )}; -our $allocFunctions = qr{(?x: - (?:(?:devm_)? - (?:kv|k|v)[czm]alloc(?:_node|_array)? | - kstrdup(?:_const)? | - kmemdup(?:_nul)?) | - (?:\w+)?alloc_skb(?:ip_align)? | - # dev_alloc_skb/netdev_alloc_skb, et al - dma_alloc_coherent -)}; - our $signature_tags = qr{(?xi: Signed-off-by:| - Co-developed-by:| Acked-by:| Tested-by:| Reviewed-by:| @@ -588,27 +580,6 @@ foreach my $entry (@mode_permission_funcs) { } $mode_perms_search = "(?:${mode_perms_search})"; -our %deprecated_apis = ( - "synchronize_rcu_bh" => "synchronize_rcu", - "synchronize_rcu_bh_expedited" => "synchronize_rcu_expedited", - "call_rcu_bh" => "call_rcu", - "rcu_barrier_bh" => "rcu_barrier", - "synchronize_sched" => "synchronize_rcu", - "synchronize_sched_expedited" => "synchronize_rcu_expedited", - "call_rcu_sched" => "call_rcu", - "rcu_barrier_sched" => "rcu_barrier", - "get_state_synchronize_sched" => "get_state_synchronize_rcu", - "cond_synchronize_sched" => "cond_synchronize_rcu", -); - -#Create a search pattern for all these strings to speed up a loop below -our $deprecated_apis_search = ""; -foreach my $entry (keys %deprecated_apis) { - $deprecated_apis_search .= '|' if ($deprecated_apis_search ne ""); - $deprecated_apis_search .= $entry; -} -$deprecated_apis_search = "(?:${deprecated_apis_search})"; - our $mode_perms_world_writable = qr{ S_IWUGO | S_IWOTH | @@ -908,7 +879,7 @@ sub seed_camelcase_includes { $camelcase_seeded = 1; if (-e ".git") { - my $git_last_include_commit = `${git_command} log --no-merges --pretty=format:"%h%n" -1 -- include`; + my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`; chomp $git_last_include_commit; $camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit"; } else { @@ -936,7 +907,7 @@ sub seed_camelcase_includes { } if (-e ".git") { - $files = `${git_command} ls-files "include/*.h"`; + $files = `git ls-files "include/*.h"`; @include_files = split('\n', $files); } @@ -960,13 +931,13 @@ sub git_commit_info { return ($id, $desc) if ((which("git") eq "") || !(-e ".git")); - my $output = `${git_command} log --no-color --format='%H %s' -1 $commit 2>&1`; + my $output = `git log --no-color --format='%H %s' -1 $commit 2>&1`; $output =~ s/^\s*//gm; my @lines = split("\n", $output); return ($id, $desc) if ($#lines < 0); - if ($lines[0] =~ /^error: short SHA1 $commit is ambiguous/) { + if ($lines[0] =~ /^error: short SHA1 $commit is ambiguous\./) { # Maybe one day convert this block of bash into something that returns # all matching commit ids, but it's very slow... # @@ -1010,7 +981,7 @@ if ($git) { } else { $git_range = "-1 $commit_expr"; } - my $lines = `${git_command} log --no-color --no-merges --pretty=format:'%H %s' $git_range`; + my $lines = `git log --no-color --no-merges --pretty=format:'%H %s' $git_range`; foreach my $line (split(/\n/, $lines)) { $line =~ /^([0-9a-fA-F]{40,40}) (.*)$/; next if (!defined($1) || !defined($2)); @@ -1025,7 +996,6 @@ if ($git) { } my $vname; -$allow_c99_comments = !defined $ignore_type{"C99_COMMENT_TOLERANCE"}; for my $filename (@ARGV) { my $FILE; if ($git) { @@ -2270,6 +2240,41 @@ sub pos_last_openparen { return length(expand_tabs(substr($line, 0, $last_openparen))) + 1; } +# Checks specific to U-Boot +sub u_boot_line { + my ($realfile, $line, $herecurr) = @_; + + # ask for a test if a new uclass ID is added + if ($realfile =~ /uclass-id.h/ && $line =~ /^\+/) { + WARN("NEW_UCLASS", + "Possible new uclass - make sure to add a sandbox driver, plus a test in test/dm/<name>.c\n" . $herecurr); + } + + # try to get people to use the livetree API + if ($line =~ /^\+.*fdtdec_/) { + WARN("LIVETREE", + "Use the livetree API (dev_read_...)\n" . $herecurr); + } + + # add tests for new commands + if ($line =~ /^\+.*do_($Ident)\(struct cmd_tbl.*/) { + WARN("CMD_TEST", + "Possible new command - make sure you add a test\n" . $herecurr); + } + + # use if instead of #if + if ($line =~ /^\+#if.*CONFIG.*/) { + WARN("PREFER_IF", + "Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible\n" . $herecurr); + } + + # use defconfig to manage CONFIG_CMD options + if ($line =~ /\+\s*#\s*(define|undef)\s+(CONFIG_CMD\w*)\b/) { + ERROR("DEFINE_CONFIG_CMD", + "All commands are managed by Kconfig\n" . $herecurr); + } +} + sub process { my $filename = shift; @@ -2691,24 +2696,6 @@ sub process { } else { $signatures{$sig_nospace} = 1; } - -# Check Co-developed-by: immediately followed by Signed-off-by: with same name and email - if ($sign_off =~ /^co-developed-by:$/i) { - if ($email eq $author) { - WARN("BAD_SIGN_OFF", - "Co-developed-by: should not be used to attribute nominal patch author '$author'\n" . "$here\n" . $rawline); - } - if (!defined $lines[$linenr]) { - WARN("BAD_SIGN_OFF", - "Co-developed-by: must be immediately followed by Signed-off-by:\n" . "$here\n" . $rawline); - } elsif ($rawlines[$linenr] !~ /^\s*signed-off-by:\s*(.*)/i) { - WARN("BAD_SIGN_OFF", - "Co-developed-by: must be immediately followed by Signed-off-by:\n" . "$here\n" . $rawline . "\n" .$rawlines[$linenr]); - } elsif ($1 ne $email) { - WARN("BAD_SIGN_OFF", - "Co-developed-by and Signed-off-by: name/email do not match \n" . "$here\n" . $rawline . "\n" .$rawlines[$linenr]); - } - } } # Check email subject for common tools that don't need to be mentioned @@ -2729,10 +2716,8 @@ sub process { ($line =~ /^\s*(?:WARNING:|BUG:)/ || $line =~ /^\s*\[\s*\d+\.\d{6,6}\s*\]/ || # timestamp - $line =~ /^\s*\[\<[0-9a-fA-F]{8,}\>\]/) || - $line =~ /^(?:\s+\w+:\s+[0-9a-fA-F]+){3,3}/ || - $line =~ /^\s*\#\d+\s*\[[0-9a-fA-F]+\]\s*\w+ at [0-9a-fA-F]+/) { - # stack dump address styles + $line =~ /^\s*\[\<[0-9a-fA-F]{8,}\>\]/)) { + # stack dump address $commit_log_possible_stack_dump = 1; } @@ -2904,17 +2889,6 @@ sub process { } } -# check for invalid commit id - if ($in_commit_log && $line =~ /(^fixes:|\bcommit)\s+([0-9a-f]{6,40})\b/i) { - my $id; - my $description; - ($id, $description) = git_commit_info($2, undef, undef); - if (!defined($id)) { - WARN("UNKNOWN_COMMIT_ID", - "Unknown commit id '$2', maybe rebased or not pulled?\n" . $herecurr); - } - } - # ignore non-hunk lines and lines being removed next if (!$hunk_line || $line =~ /^-/); @@ -3044,7 +3018,7 @@ sub process { my @compats = $rawline =~ /\"([a-zA-Z0-9\-\,\.\+_]+)\"/g; my $dt_path = $root . "/Documentation/devicetree/bindings/"; - my $vp_file = $dt_path . "vendor-prefixes.yaml"; + my $vp_file = $dt_path . "vendor-prefixes.txt"; foreach my $compat (@compats) { my $compat2 = $compat; @@ -3059,7 +3033,7 @@ sub process { next if $compat !~ /^([a-zA-Z0-9\-]+)\,/; my $vendor = $1; - `grep -Eq "\\"\\^\Q$vendor\E,\\.\\*\\":" $vp_file`; + `grep -Eq "^$vendor\\b" $vp_file`; if ( $? >> 8 ) { WARN("UNDOCUMENTED_DT_STRING", "DT compatible string vendor \"$vendor\" appears un-documented -- check $vp_file\n" . $herecurr); @@ -3083,24 +3057,16 @@ sub process { $comment = '..'; } -# check SPDX comment style for .[chsS] files - if ($realfile =~ /\.[chsS]$/ && - $rawline =~ /SPDX-License-Identifier:/ && - $rawline !~ m@^\+\s*\Q$comment\E\s*@) { - WARN("SPDX_LICENSE_TAG", - "Improper SPDX comment style for '$realfile', please use '$comment' instead\n" . $herecurr); - } - if ($comment !~ /^$/ && - $rawline !~ m@^\+\Q$comment\E SPDX-License-Identifier: @) { - WARN("SPDX_LICENSE_TAG", - "Missing or malformed SPDX-License-Identifier tag in line $checklicenseline\n" . $herecurr); + $rawline !~ /^\+\Q$comment\E SPDX-License-Identifier: /) { + WARN("SPDX_LICENSE_TAG", + "Missing or malformed SPDX-License-Identifier tag in line $checklicenseline\n" . $herecurr); } elsif ($rawline =~ /(SPDX-License-Identifier: .*)/) { - my $spdx_license = $1; - if (!is_SPDX_License_valid($spdx_license)) { - WARN("SPDX_LICENSE_TAG", - "'$spdx_license' is not supported in LICENSES/...\n" . $herecurr); - } + my $spdx_license = $1; + if (!is_SPDX_License_valid($spdx_license)) { + WARN("SPDX_LICENSE_TAG", + "'$spdx_license' is not supported in LICENSES/...\n" . $herecurr); + } } } } @@ -3108,14 +3074,6 @@ sub process { # check we are in a valid source file if not then ignore this hunk next if ($realfile !~ /\.(h|c|s|S|sh|dtsi|dts)$/); -# check for using SPDX-License-Identifier on the wrong line number - if ($realline != $checklicenseline && - $rawline =~ /\bSPDX-License-Identifier:/ && - substr($line, @-, @+ - @-) eq "$;" x (@+ - @-)) { - WARN("SPDX_LICENSE_TAG", - "Misplaced SPDX-License-Identifier tag - use line $checklicenseline instead\n" . $herecurr); - } - # line length limit (with some exclusions) # # There are a few types of lines that may extend beyond $max_line_length: @@ -3173,8 +3131,10 @@ sub process { if ($msg_type ne "" && (show_type("LONG_LINE") || show_type($msg_type))) { - WARN($msg_type, - "line over $max_line_length characters\n" . $herecurr); + my $msg_level = \&WARN; + $msg_level = \&CHK if ($file); + &{$msg_level}($msg_type, + "line length of $length exceeds $max_line_length columns\n" . $herecurr); } } @@ -3184,6 +3144,10 @@ sub process { "adding a line without newline at end of file\n" . $herecurr); } + if ($u_boot) { + u_boot_line($realfile, $line, $herecurr); + } + # check we are in a valid source file C or perl if not then ignore this hunk next if ($realfile !~ /\.(h|c|pl|dtsi|dts)$/); @@ -3953,23 +3917,14 @@ sub process { WARN("STATIC_CONST_CHAR_ARRAY", "static const char * array should probably be static const char * const\n" . $herecurr); - } - -# check for initialized const char arrays that should be static const - if ($line =~ /^\+\s*const\s+(char|unsigned\s+char|_*u8|(?:[us]_)?int8_t)\s+\w+\s*\[\s*(?:\w+\s*)?\]\s*=\s*"/) { - if (WARN("STATIC_CONST_CHAR_ARRAY", - "const array should probably be static const\n" . $herecurr) && - $fix) { - $fixed[$fixlinenr] =~ s/(^.\s*)const\b/${1}static const/; - } - } + } # check for static char foo[] = "bar" declarations. if ($line =~ /\bstatic\s+char\s+(\w+)\s*\[\s*\]\s*=\s*"/) { WARN("STATIC_CONST_CHAR_ARRAY", "static char array declaration should probably be static const char\n" . $herecurr); - } + } # check for const <foo> const where <foo> is not a pointer or array type if ($sline =~ /\bconst\s+($BasicType)\s+const\b/) { @@ -4677,7 +4632,7 @@ sub process { # closing brace should have a space following it when it has anything # on the line - if ($line =~ /}(?!(?:,|;|\)|\}))\S/) { + if ($line =~ /}(?!(?:,|;|\)))\S/) { if (ERROR("SPACING", "space required after that close brace '}'\n" . $herecurr) && $fix) { @@ -5027,6 +4982,17 @@ sub process { while ($line =~ m{($Constant|$Lval)}g) { my $var = $1; +#gcc binary extension + if ($var =~ /^$Binary$/) { + if (WARN("GCC_BINARY_CONSTANT", + "Avoid gcc v4.3+ binary constant extension: <$var>\n" . $herecurr) && + $fix) { + my $hexval = sprintf("0x%x", oct($var)); + $fixed[$fixlinenr] =~ + s/\b$var\b/$hexval/; + } + } + #CamelCase if ($var !~ /^$Constant$/ && $var =~ /[A-Z][a-z]|[a-z][A-Z]/ && @@ -5208,7 +5174,7 @@ sub process { next if ($arg =~ /\.\.\./); next if ($arg =~ /^type$/i); my $tmp_stmt = $define_stmt; - $tmp_stmt =~ s/\b(sizeof|typeof|__typeof__|__builtin\w+|typecheck\s*\(\s*$Type\s*,|\#+)\s*\(*\s*$arg\s*\)*\b//g; + $tmp_stmt =~ s/\b(typeof|__typeof__|__builtin\w+|typecheck\s*\(\s*$Type\s*,|\#+)\s*\(*\s*$arg\s*\)*\b//g; $tmp_stmt =~ s/\#+\s*$arg\b//g; $tmp_stmt =~ s/\b$arg\s*\#\#//g; my $use_cnt = () = $tmp_stmt =~ /\b$arg\b/g; @@ -5607,8 +5573,7 @@ sub process { my ($s, $c) = ctx_statement_block($linenr - 3, $realcnt, 0); # print("line: <$line>\nprevline: <$prevline>\ns: <$s>\nc: <$c>\n\n\n"); - if ($s =~ /(?:^|\n)[ \+]\s*(?:$Type\s*)?\Q$testval\E\s*=\s*(?:\([^\)]*\)\s*)?\s*$allocFunctions\s*\(/ && - $s !~ /\b__GFP_NOWARN\b/ ) { + if ($s =~ /(?:^|\n)[ \+]\s*(?:$Type\s*)?\Q$testval\E\s*=\s*(?:\([^\)]*\)\s*)?\s*(?:devm_)?(?:[kv][czm]alloc(?:_node|_array)?\b|kstrdup|kmemdup|(?:dev_)?alloc_skb)/) { WARN("OOM_MESSAGE", "Possible unnecessary 'out of memory' message\n" . $hereprev); } @@ -5729,7 +5694,7 @@ sub process { # ignore udelay's < 10, however if (! ($delay < 10) ) { CHK("USLEEP_RANGE", - "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst\n" . $herecurr); + "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $herecurr); } if ($delay > 2000) { WARN("LONG_UDELAY", @@ -5741,7 +5706,7 @@ sub process { if ($line =~ /\bmsleep\s*\((\d+)\);/) { if ($1 < 20) { WARN("MSLEEP", - "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst\n" . $herecurr); + "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt\n" . $herecurr); } } @@ -5890,18 +5855,6 @@ sub process { "__aligned(size) is preferred over __attribute__((aligned(size)))\n" . $herecurr); } -# Check for __attribute__ section, prefer __section - if ($realfile !~ m@\binclude/uapi/@ && - $line =~ /\b__attribute__\s*\(\s*\(.*_*section_*\s*\(\s*("[^"]*")/) { - my $old = substr($rawline, $-[1], $+[1] - $-[1]); - my $new = substr($old, 1, -1); - if (WARN("PREFER_SECTION", - "__section($new) is preferred over __attribute__((section($old)))\n" . $herecurr) && - $fix) { - $fixed[$fixlinenr] =~ s/\b__attribute__\s*\(\s*\(\s*_*section_*\s*\(\s*\Q$old\E\s*\)\s*\)\s*\)/__section($new)/; - } - } - # Check for __attribute__ format(printf, prefer __printf if ($realfile !~ m@\binclude/uapi/@ && $line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf/) { @@ -6024,7 +5977,7 @@ sub process { while ($fmt =~ /(\%[\*\d\.]*p(\w))/g) { $specifier = $1; $extension = $2; - if ($extension !~ /[SsBKRraEhMmIiUDdgVCbGNOxt]/) { + if ($extension !~ /[SsBKRraEhMmIiUDdgVCbGNOx]/) { $bad_specifier = $specifier; last; } @@ -6144,11 +6097,11 @@ sub process { my $max = $7; if ($min eq $max) { WARN("USLEEP_RANGE", - "usleep_range should not use min == max args; see Documentation/timers/timers-howto.rst\n" . "$here\n$stat\n"); + "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); } elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ && $min > $max) { WARN("USLEEP_RANGE", - "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.rst\n" . "$here\n$stat\n"); + "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); } } @@ -6271,8 +6224,8 @@ sub process { } } -# check for pointless casting of alloc functions - if ($line =~ /\*\s*\)\s*$allocFunctions\b/) { +# check for pointless casting of kmalloc return + if ($line =~ /\*\s*\)\s*[kv][czm]alloc(_node){0,1}\b/) { WARN("UNNECESSARY_CASTS", "unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr); } @@ -6280,7 +6233,7 @@ sub process { # alloc style # p = alloc(sizeof(struct foo), ...) should be p = alloc(sizeof(*p), ...) if ($perl_version_ok && - $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*((?:kv|k|v)[mz]alloc(?:_node)?)\s*\(\s*(sizeof\s*\(\s*struct\s+$Lval\s*\))/) { + $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*([kv][mz]alloc(?:_node)?)\s*\(\s*(sizeof\s*\(\s*struct\s+$Lval\s*\))/) { CHK("ALLOC_SIZEOF_STRUCT", "Prefer $3(sizeof(*$1)...) over $3($4...)\n" . $herecurr); } @@ -6443,6 +6396,19 @@ sub process { } } +# check for bool bitfields + if ($sline =~ /^.\s+bool\s*$Ident\s*:\s*\d+\s*;/) { + WARN("BOOL_BITFIELD", + "Avoid using bool as bitfield. Prefer bool bitfields as unsigned int or u<8|16|32>\n" . $herecurr); + } + +# check for bool use in .h files + if ($realfile =~ /\.h$/ && + $sline =~ /^.\s+bool\s*$Ident\s*(?::\s*d+\s*)?;/) { + CHK("BOOL_MEMBER", + "Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384\n" . $herecurr); + } + # check for semaphores initialized locked if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) { WARN("CONSIDER_COMPLETION", @@ -6461,20 +6427,6 @@ sub process { "please use device_initcall() or more appropriate function instead of __initcall() (see include/linux/init.h)\n" . $herecurr); } -# check for spin_is_locked(), suggest lockdep instead - if ($line =~ /\bspin_is_locked\(/) { - WARN("USE_LOCKDEP", - "Where possible, use lockdep_assert_held instead of assertions based on spin_is_locked\n" . $herecurr); - } - -# check for deprecated apis - if ($line =~ /\b($deprecated_apis_search)\b\s*\(/) { - my $deprecated_api = $1; - my $new_api = $deprecated_apis{$deprecated_api}; - WARN("DEPRECATED_API", - "Deprecated use of '$deprecated_api', prefer '$new_api' instead\n" . $herecurr); - } - # check for various structs that are normally const (ops, kgdb, device_tree) # and avoid what seem like struct definitions 'struct foo {' if ($line !~ /\bconst\b/ && @@ -6509,12 +6461,6 @@ sub process { "Using $1 should generally have parentheses around the comparison\n" . $herecurr); } -# nested likely/unlikely calls - if ($line =~ /\b(?:(?:un)?likely)\s*\(\s*!?\s*(IS_ERR(?:_OR_NULL|_VALUE)?|WARN)/) { - WARN("LIKELY_MISUSE", - "nested (un)?likely() calls, $1 already uses unlikely() internally\n" . $herecurr); - } - # whine mightly about in_atomic if ($line =~ /\bin_atomic\s*\(/) { if ($realfile =~ m@^drivers/@) { @@ -6674,12 +6620,6 @@ sub process { "unknown module license " . $extracted_string . "\n" . $herecurr); } } - -# check for sysctl duplicate constants - if ($line =~ /\.extra[12]\s*=\s*&(zero|one|int_max)\b/) { - WARN("DUPLICATED_SYSCTL_CONST", - "duplicated sysctl range checking value '$1', consider using the shared one in include/linux/sysctl.h\n" . $herecurr); - } } # If we have no input at all, then there is nothing to report on diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index fe9a1971cc..2210f46e44 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -51,7 +51,6 @@ CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE CONFIG_ARMV8_SWITCH_TO_EL1 CONFIG_ARM_ARCH_CP15_ERRATA -CONFIG_ARM_DCC CONFIG_ARM_FREQ CONFIG_ARM_GIC_BASE_ADDRESS CONFIG_ARM_PL180_MMCI_BASE |