diff options
author | Tim Harvey <tharvey@gateworks.com> | 2014-06-03 03:13:27 +0400 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2014-06-06 12:07:26 +0400 |
commit | 0cc11dea89861802c2f278830e5d97b32c3fef4d (patch) | |
tree | 29367862199a0cae5d7a82593eaeab9415224762 | |
parent | 680e8db4503da790a07e90bf88fb4e1008097e2b (diff) | |
download | u-boot-0cc11dea89861802c2f278830e5d97b32c3fef4d.tar.xz |
imx: ventana: switch to SPL
Switch to an SPL image. The SPL for Ventana does the following:
- setup i2c and read the factory programmed EEPROM to obtain DRAM config
and model for board-specific calibration data
- configure DRAM per CPU/size/layout/devices/calibration
- load u-boot.img from NAND and jump to it
This allows for a single SPL+u-boot.img to replace the previous multiple boa
configurations.
Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-rw-r--r-- | board/gateworks/gw_ventana/Makefile | 1 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/README | 92 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/gw_ventana.c | 10 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/gw_ventana.cfg | 15 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/gw_ventana_spl.c | 419 | ||||
-rw-r--r-- | boards.cfg | 6 | ||||
-rw-r--r-- | include/configs/gw_ventana.h | 11 |
7 files changed, 498 insertions, 56 deletions
diff --git a/board/gateworks/gw_ventana/Makefile b/board/gateworks/gw_ventana/Makefile index 03bd1fd372..33a1788f20 100644 --- a/board/gateworks/gw_ventana/Makefile +++ b/board/gateworks/gw_ventana/Makefile @@ -7,4 +7,5 @@ # obj-y := gw_ventana.o gsc.o eeprom.o +obj-$(CONFIG_SPL_BUILD) += gw_ventana_spl.o diff --git a/board/gateworks/gw_ventana/README b/board/gateworks/gw_ventana/README index 9e697d6199..888657cb0c 100644 --- a/board/gateworks/gw_ventana/README +++ b/board/gateworks/gw_ventana/README @@ -3,53 +3,81 @@ U-Boot for the Gateworks Ventana Product Family boards This file contains information for the port of U-Boot to the Gateworks Ventana Product family boards. -1. Boot source, boot from NAND +1. Secondary Program Loader (SPL) +--------------------------------- + +The i.MX6 has a BOOT ROM PPL (Primary Program Loader) which supports loading +an executable image from various boot devices. + +The Gateworks Ventana board config uses an SPL build configuration. This +will build the following artifacts from u-boot source: + - SPL - Secondary Program Loader that the i.MX6 BOOT ROM (Primary Program + Loader) boots. This detects CPU/DRAM configuration, configures + The DRAM controller, loads u-boot.img from the detected boot device, + and jumps to it. As this is booted from the PPL, it has an IVT/DCD + table. + - u-boot.img - The main u-boot core which is u-boot.bin with a image header. + + +2. Build +-------- + +To build U-Boot for the Gateworks Ventana product family: + + make gwventana_config + make + + +3. Boot source, boot from NAND ------------------------------ The i.MX6 BOOT ROM expects some structures that provide details of NAND layout and bad block information (referred to as 'bootstreams') which are replicated -multiple times in NAND. The number of replications is configurable through -board strapping options and eFUSE settings. The Freescale 'kobs-ng' -application from the Freescale LTIB BSP, which runs under Linux, must be used -to program the bootstream in order to setup the replicated headers correctly. +multiple times in NAND. The number of replications and their spacing (referred +to as search stride) is configurable through board strapping options and/or +eFUSE settings (BOOT_SEARCH_COUNT / Pages in block from BOOT_CFG2). In +addition, the i.MX6 BOOT ROM Flash Configuration Block (FCB) supports two +copies of a bootloader in flash in the case that a bad block has corrupted one. +The Freescale 'kobs-ng' application from the Freescale LTIB BSP, which runs +under Linux and operates on an MTD partition, must be used to program the +bootstream in order to setup this flash structure correctly. The Gateworks Ventana boards with NAND flash have been factory programmed such that their eFUSE settings expect 2 copies of the boostream (this is specified by providing kobs-ng with the --search_exponent=1 argument). Once in -Linux with MTD support for the NAND on /dev/mtd0 you can program the boostream +Linux with MTD support for the NAND on /dev/mtd0 you can program the SPL with: -kobs-ng init -v -x --search_exponent=1 u-boot.imx +kobs-ng init -v -x --search_exponent=1 SPL -The kobs-ng application uses an imximage (u-boot.imx) which contains the -Image Vector Table (IVT) and Device Configuration Data (DCD) structures that -the i.MX6 BOOT ROM requires to boot. The kobs-ng adds the Firmware -Configuration Block (FCB) and Discovered Bad Block Table (DBBT). +The kobs-ng application uses an imximage which contains the Image Vector Table +(IVT) and Device Configuration Data (DCD) structures that the i.MX6 BOOT ROM +requires to boot. The kobs-ng adds the Firmware Configuration Block (FCB) and +Discovered Bad Block Table (DBBT). The SPL build artifact from u-boot is +an imximage. -This information is taken from: - http://trac.gateworks.com/wiki/ventana/bootloader#NANDFLASH +The u-boot.img, which is the non SPL u-boot binary appended to a u-boot image +header must be programmed in the NAND flash boot device at an offset hard +coded in the SPL. For the Ventana boards, this has been chosen to be 14MB. +The image can be programmed from either u-boot or Linux: -More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual. - -2. Build --------- +u-boot: +Ventana > setenv mtdparts mtdparts=nand:14m(spl),2m(uboot),1m(env),-(rootfs) +Ventana > tftp ${loadaddr} u-boot.img && nand erase.part uboot && \ + nand write ${loadaddr} uboot ${filesize} -There are several Gateworks Ventana boards that share a simliar design but -vary based on CPU, Memory configuration, and subloaded devices. Although -the subloaded devices are handled dynamically in the bootloader using -factory configured EEPROM data to modify the device-tree, the CPU choice -(IMX6Q vs IMX6DL) and memory configurations are currently compile-time -options. +Linux: +nandwrite /dev/mtd1 u-boot.img -The following Gateworks Ventana configurations exist: - gwventanaq1gspi: MX6Q,1GB,SPI FLASH - gwventanaq : MX6Q,512MB,NAND FLASH - gwventanaq1g : MX6Q,1GB,NAND FLASH - gwventanadl : MX6DL,512MB,NAND FLASH - gwventanadl1g : MX6DL,1GB,NAND FLASH +The above assumes the default Ventana partitioning scheme which is configured +via the mtdparts env var: + - spl: 14MB + - uboot: 2M + - env: 1M + - rootfs: the rest -To build U-Boot for the MX6Q,1GB,NAND FLASH for example: +This information is taken from: + http://trac.gateworks.com/wiki/ventana/bootloader#NANDFLASH - make gwventanaq1g_config - make +More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual. diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index a33cb713cd..9d2651f0cb 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1102,6 +1102,7 @@ void get_board_serial(struct tag_serialnr *serialnr) * Board Support */ +/* called from SPL board_init_f() */ int board_early_init_f(void) { setup_iomux_uart(); @@ -1115,8 +1116,7 @@ int board_early_init_f(void) int dram_init(void) { - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, - CONFIG_DDR_MB*1024*1024); + gd->ram_size = imx_ddr_size(); return 0; } @@ -1258,9 +1258,11 @@ int misc_init_r(void) * env scripts will try loading each from most specific to * least. */ - if (is_cpu_type(MXC_CPU_MX6Q)) + if (is_cpu_type(MXC_CPU_MX6Q) || + is_cpu_type(MXC_CPU_MX6D)) cputype = "imx6q"; - else if (is_cpu_type(MXC_CPU_MX6DL)) + else if (is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO)) cputype = "imx6dl"; memset(str, 0, sizeof(str)); for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++) diff --git a/board/gateworks/gw_ventana/gw_ventana.cfg b/board/gateworks/gw_ventana/gw_ventana.cfg index 27f09745c1..9ab95f5c93 100644 --- a/board/gateworks/gw_ventana/gw_ventana.cfg +++ b/board/gateworks/gw_ventana/gw_ventana.cfg @@ -24,21 +24,6 @@ BOOT_FROM nand #define __ASSEMBLY__ #include <config.h> -#include "asm/arch/mx6-ddr.h" #include "asm/arch/iomux.h" #include "asm/arch/crm_regs.h" - -/* Memory configuration (size is overridden via eeprom config) */ -#include "../../boundary/nitrogen6x/ddr-setup.cfg" -#if defined(CONFIG_MX6Q) && CONFIG_DDR_MB == 1024 - #include "../../boundary/nitrogen6x/1066mhz_4x128mx16.cfg" -#elif defined(CONFIG_MX6DL) && CONFIG_DDR_MB == 1024 - #include "../../boundary/nitrogen6x/800mhz_4x128mx16.cfg" -#elif defined(CONFIG_MX6DL) && CONFIG_DDR_MB == 512 - #include "../../boundary/nitrogen6x/800mhz_2x128mx16.cfg" -#elif defined(CONFIG_MX6Q) && CONFIG_DDR_MB == 512 - #include "../../boundary/nitrogen6x/800mhz_2x128mx16.cfg" -#else - #error "Unsupported CPU/Memory configuration" -#endif #include "clocks.cfg" diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c new file mode 100644 index 0000000000..e943879303 --- /dev/null +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -0,0 +1,419 @@ +/* + * Copyright (C) 2014 Gateworks Corporation + * Author: Tim Harvey <tharvey@gateworks.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-ddr.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <spl.h> + +#include "ventana_eeprom.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */ +#define I2C_GSC 0 +#define GSC_EEPROM_ADDR 0x51 +#define GSC_EEPROM_DDR_SIZE 0x2B /* enum (512,1024,2048) MB */ +#define GSC_EEPROM_DDR_WIDTH 0x2D /* enum (32,64) bit */ +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +#define CONFIG_SYS_I2C_SPEED 100000 + +/* I2C1: GSC */ +static struct i2c_pads_info mx6q_i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } +}; +static struct i2c_pads_info mx6dl_i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } +}; + +static void i2c_setup_iomux(void) +{ + if (is_cpu_type(MXC_CPU_MX6Q)) + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info0); + else + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info0); +} + +/* configure MX6Q/DUAL mmdc DDR io registers */ +struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { + /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ + .dram_sdclk_0 = 0x00020030, + .dram_sdclk_1 = 0x00020030, + .dram_cas = 0x00020030, + .dram_ras = 0x00020030, + .dram_reset = 0x00020030, + /* SDCKE[0:1]: 100k pull-up */ + .dram_sdcke0 = 0x00003000, + .dram_sdcke1 = 0x00003000, + /* SDBA2: pull-up disabled */ + .dram_sdba2 = 0x00000000, + /* SDODT[0:1]: 100k pull-up, 40 ohm */ + .dram_sdodt0 = 0x00003030, + .dram_sdodt1 = 0x00003030, + /* SDQS[0:7]: Differential input, 40 ohm */ + .dram_sdqs0 = 0x00000030, + .dram_sdqs1 = 0x00000030, + .dram_sdqs2 = 0x00000030, + .dram_sdqs3 = 0x00000030, + .dram_sdqs4 = 0x00000030, + .dram_sdqs5 = 0x00000030, + .dram_sdqs6 = 0x00000030, + .dram_sdqs7 = 0x00000030, + + /* DQM[0:7]: Differential input, 40 ohm */ + .dram_dqm0 = 0x00020030, + .dram_dqm1 = 0x00020030, + .dram_dqm2 = 0x00020030, + .dram_dqm3 = 0x00020030, + .dram_dqm4 = 0x00020030, + .dram_dqm5 = 0x00020030, + .dram_dqm6 = 0x00020030, + .dram_dqm7 = 0x00020030, +}; + +/* configure MX6Q/DUAL mmdc GRP io registers */ +struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { + /* DDR3 */ + .grp_ddr_type = 0x000c0000, + .grp_ddrmode_ctl = 0x00020000, + /* disable DDR pullups */ + .grp_ddrpke = 0x00000000, + /* ADDR[00:16], SDBA[0:1]: 40 ohm */ + .grp_addds = 0x00000030, + /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */ + .grp_ctlds = 0x00000030, + /* DATA[00:63]: Differential input, 40 ohm */ + .grp_ddrmode = 0x00020000, + .grp_b0ds = 0x00000030, + .grp_b1ds = 0x00000030, + .grp_b2ds = 0x00000030, + .grp_b3ds = 0x00000030, + .grp_b4ds = 0x00000030, + .grp_b5ds = 0x00000030, + .grp_b6ds = 0x00000030, + .grp_b7ds = 0x00000030, +}; + +/* configure MX6SOLO/DUALLITE mmdc DDR io registers */ +struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { + /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ + .dram_sdclk_0 = 0x00020030, + .dram_sdclk_1 = 0x00020030, + .dram_cas = 0x00020030, + .dram_ras = 0x00020030, + .dram_reset = 0x00020030, + /* SDCKE[0:1]: 100k pull-up */ + .dram_sdcke0 = 0x00003000, + .dram_sdcke1 = 0x00003000, + /* SDBA2: pull-up disabled */ + .dram_sdba2 = 0x00000000, + /* SDODT[0:1]: 100k pull-up, 40 ohm */ + .dram_sdodt0 = 0x00003030, + .dram_sdodt1 = 0x00003030, + /* SDQS[0:7]: Differential input, 40 ohm */ + .dram_sdqs0 = 0x00000030, + .dram_sdqs1 = 0x00000030, + .dram_sdqs2 = 0x00000030, + .dram_sdqs3 = 0x00000030, + .dram_sdqs4 = 0x00000030, + .dram_sdqs5 = 0x00000030, + .dram_sdqs6 = 0x00000030, + .dram_sdqs7 = 0x00000030, + + /* DQM[0:7]: Differential input, 40 ohm */ + .dram_dqm0 = 0x00020030, + .dram_dqm1 = 0x00020030, + .dram_dqm2 = 0x00020030, + .dram_dqm3 = 0x00020030, + .dram_dqm4 = 0x00020030, + .dram_dqm5 = 0x00020030, + .dram_dqm6 = 0x00020030, + .dram_dqm7 = 0x00020030, +}; + +/* configure MX6SOLO/DUALLITE mmdc GRP io registers */ +struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { + /* DDR3 */ + .grp_ddr_type = 0x000c0000, + /* SDQS[0:7]: Differential input, 40 ohm */ + .grp_ddrmode_ctl = 0x00020000, + /* disable DDR pullups */ + .grp_ddrpke = 0x00000000, + /* ADDR[00:16], SDBA[0:1]: 40 ohm */ + .grp_addds = 0x00000030, + /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */ + .grp_ctlds = 0x00000030, + /* DATA[00:63]: Differential input, 40 ohm */ + .grp_ddrmode = 0x00020000, + .grp_b0ds = 0x00000030, + .grp_b1ds = 0x00000030, + .grp_b2ds = 0x00000030, + .grp_b3ds = 0x00000030, + .grp_b4ds = 0x00000030, + .grp_b5ds = 0x00000030, + .grp_b6ds = 0x00000030, + .grp_b7ds = 0x00000030, +}; + +/* MT41K128M16JT-125 */ +static struct mx6_ddr3_cfg mt41k128m16jt_125 = { + .mem_speed = 1600, + .density = 2, + .width = 16, + .banks = 8, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, +}; + +/* GW54xx specific calibration */ +static struct mx6_mmdc_calibration gw54xxq_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x00190018, + .p0_mpwldectrl1 = 0x0021001D, + .p1_mpwldectrl0 = 0x00160027, + .p1_mpwldectrl1 = 0x0012001E, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x43370346, + .p0_mpdgctrl1 = 0x032A0321, + .p1_mpdgctrl0 = 0x433A034D, + .p1_mpdgctrl1 = 0x032F0235, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x3C313539, + .p1_mprddlctl = 0x37333140, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x37393C38, + .p1_mpwrdlctl = 0x42334538, +}; + +/* GW53xx specific calibration */ +static struct mx6_mmdc_calibration gw53xxq_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x00160013, + .p0_mpwldectrl1 = 0x00090024, + .p1_mpwldectrl0 = 0x001F0018, + .p1_mpwldectrl1 = 0x000C001C, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x433A034C, + .p0_mpdgctrl1 = 0x0336032F, + .p1_mpdgctrl0 = 0x4343034A, + .p1_mpdgctrl1 = 0x03370222, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x3F343638, + .p1_mprddlctl = 0x38373442, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x343A3E39, + .p1_mpwrdlctl = 0x44344239, +}; +static struct mx6_mmdc_calibration gw53xxdl_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x003C003C, + .p0_mpwldectrl1 = 0x00330038, + .p1_mpwldectrl0 = 0x001F002A, + .p1_mpwldectrl1 = 0x0022003F, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x42410244, + .p0_mpdgctrl1 = 0x022D022D, + .p1_mpdgctrl0 = 0x4234023A, + .p1_mpdgctrl1 = 0x021C0228, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x484A4C4B, + .p1_mprddlctl = 0x4B4D4E4B, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x33342B32, + .p1_mpwrdlctl = 0x3933332B, +}; + +/* GW52xx specific calibration */ +static struct mx6_mmdc_calibration gw52xxdl_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x0040003F, + .p0_mpwldectrl1 = 0x00370037, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x42420244, + .p0_mpdgctrl1 = 0x022F022F, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x49464B4A, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x32362C32, +}; + +/* GW51xx specific calibration */ +static struct mx6_mmdc_calibration gw51xxq_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x00150016, + .p0_mpwldectrl1 = 0x001F0017, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x433D034D, + .p0_mpdgctrl1 = 0x033D032F, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x3F313639, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x33393F36, +}; + +static struct mx6_mmdc_calibration gw51xxdl_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x003D003F, + .p0_mpwldectrl1 = 0x002F0038, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x423A023A, + .p0_mpdgctrl1 = 0x022A0228, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x48494C4C, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x34352D31, +}; + +static void spl_dram_init(int width, int size, int board_model) +{ + struct mx6_ddr3_cfg *mem = &mt41k128m16jt_125; + struct mx6_mmdc_calibration *calib; + struct mx6_ddr_sysinfo sysinfo = { + /* width of data bus:0=16,1=32,2=64 */ + .dsize = width/32, + /* config for full 4GB range so that get_mem_size() works */ + .cs_density = 32, /* 32Gb per CS */ + /* single chip select */ + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */ +#ifdef RTT_NOM_120OHM + .rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */ +#else + .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */ +#endif + .walat = 1, /* Write additional latency */ + .ralat = 5, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ + }; + + /* + * MMDC Calibration requires the following data: + * mx6_mmdc_calibration - board-specific calibration (routing delays) + * mx6_ddr_sysinfo - board-specific memory architecture (width/cs/etc) + * mx6_ddr_cfg - chip specific timing/layout details + */ + switch (board_model) { + default: + case GW51xx: + if (is_cpu_type(MXC_CPU_MX6Q)) + calib = &gw51xxq_mmdc_calib; + else + calib = &gw51xxdl_mmdc_calib; + break; + case GW52xx: + calib = &gw52xxdl_mmdc_calib; + break; + case GW53xx: + if (is_cpu_type(MXC_CPU_MX6Q)) + calib = &gw53xxq_mmdc_calib; + else + calib = &gw53xxdl_mmdc_calib; + break; + case GW54xx: + calib = &gw54xxq_mmdc_calib; + break; + } + + if (is_cpu_type(MXC_CPU_MX6Q)) + mx6dq_dram_iocfg(width, &mx6dq_ddr_ioregs, + &mx6dq_grp_ioregs); + else + mx6sdl_dram_iocfg(width, &mx6sdl_ddr_ioregs, + &mx6sdl_grp_ioregs); + mx6_dram_cfg(&sysinfo, calib, mem); +} + +/* + * called from C runtime startup code (arch/arm/lib/crt0.S:_main) + * - we have a stack and a place to store GD, both in SRAM + * - no variable global data is available + */ +void board_init_f(ulong dummy) +{ + struct ventana_board_info ventana_info; + int board_model; + + /* + * Zero out global data: + * - this shoudl be done by crt0.S + * - failure to zero it will cause i2c_setup to fail + */ + memset((void *)gd, 0, sizeof(struct global_data)); + + /* setup AIPS and disable watchdog */ + arch_cpu_init(); + + /* iomux and setup of i2c */ + board_early_init_f(); + i2c_setup_iomux(); + + /* setup GP timer */ + timer_init(); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + /* read/validate EEPROM info to determine board model and SDRAM cfg */ + board_model = read_eeprom(I2C_GSC, &ventana_info); + + /* provide some some default: 32bit 128MB */ + if (GW_UNKNOWN == board_model) { + ventana_info.sdram_width = 2; + ventana_info.sdram_size = 3; + } + + /* configure MMDC for SDRAM width/size and per-model calibration */ + spl_dram_init(8 << ventana_info.sdram_width, + 16 << ventana_info.sdram_size, + board_model); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + /* load/boot image from boot device */ + board_init_r(NULL, 0); +} + +void reset_cpu(ulong addr) +{ +} diff --git a/boards.cfg b/boards.cfg index 5cf0583bf2..fd4324dbb8 100644 --- a/boards.cfg +++ b/boards.cfg @@ -328,11 +328,7 @@ Active arm armv7 mx6 freescale mx6qsabreauto Active arm armv7 mx6 freescale mx6sabresd mx6dlsabresd mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6sabresd mx6qsabresd mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6slevk mx6slevk mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL Fabio Estevam <fabio.estevam@freescale.com> -Active arm armv7 mx6 gateworks gw_ventana gwventanadl gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6DL,DDR_MB=512 Tim Harvey <tharvey@gateworks.com> -Active arm armv7 mx6 gateworks gw_ventana gwventanadl1g gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6DL,DDR_MB=1024 Tim Harvey <tharvey@gateworks.com> -Active arm armv7 mx6 gateworks gw_ventana gwventanaq gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=512 Tim Harvey <tharvey@gateworks.com> -Active arm armv7 mx6 gateworks gw_ventana gwventanaq1g gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=1024 Tim Harvey <tharvey@gateworks.com> -Active arm armv7 mx6 gateworks gw_ventana gwventanaq1gspi gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=1024,SPI_FLASH Tim Harvey <tharvey@gateworks.com> +Active arm armv7 mx6 gateworks gw_ventana gwventana gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6QDL,SPL Tim Harvey <tharvey@gateworks.com> Active arm armv7 mx6 solidrun hummingboard hummingboard_solo hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512 Jon Nettleton <jon.nettleton@gmail.com> Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman <sakoman@gmail.com> Active arm armv7 omap3 - pandora omap3_pandora - Grazvydas Ignotas <notasas@gmail.com> diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index cd554957dd..fb939132f9 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -7,6 +7,17 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* SPL */ +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +/* +#define CONFIG_SPL_SATA_SUPPORT +*/ +/* Location in NAND to read U-Boot from */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024) + +#include "imx6_spl.h" /* common IMX6 SPL configuration */ #include "mx6_common.h" #define CONFIG_MX6 #define CONFIG_DISPLAY_CPUINFO /* display cpu info */ |