diff options
author | Tom Rini <trini@konsulko.com> | 2016-01-27 23:05:12 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2016-01-27 23:05:12 +0300 |
commit | 19bde0316f2c58b3ab6357832790aee6ed7a4ad5 (patch) | |
tree | 8216f416e21cf71745abaec2c5a42ab9824b290e | |
parent | b20c38a973a51bf3f663bd298c63ad1b8e0de445 (diff) | |
parent | f36919a8138ed7ecd3dbce4630e02936b13907da (diff) | |
download | u-boot-19bde0316f2c58b3ab6357832790aee6ed7a4ad5.tar.xz |
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
108 files changed, 1164 insertions, 1263 deletions
@@ -21,6 +21,9 @@ Jagan Teki <jagannadha.sutradharudu-teki@xilinx.com> Markus Klotzbuecher <mk@denx.de> Prabhakar Kushwaha <prabhakar@freescale.com> Rajeshwari Shinde <rajeshwari.s@samsung.com> +Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> +Ricardo Ribalda <ricardo.ribalda@uam.es> +Ricardo Ribalda <ricardo.ribalda@gmail.com> Sandeep Paulraj <s-paulraj@ti.com> Shaohui Xie <Shaohui.Xie@freescale.com> Stefan Roese <stroese> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 876a620cf1..d2dbb1a5c2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -558,15 +558,15 @@ config ARCH_ZYNQ select CPU_V7 select SUPPORT_SPL select OF_CONTROL - select SPL_OF_CONTROL + select SPL_OF_CONTROL if SPL select DM select DM_ETH - select SPL_DM + select SPL_DM if SPL select DM_MMC select DM_SPI select DM_SERIAL select DM_SPI_FLASH - select SPL_SEPARATE_BSS + select SPL_SEPARATE_BSS if SPL config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig index e5a4fdd0fd..9a19dfa77f 100644 --- a/arch/arm/cpu/armv8/zynqmp/Kconfig +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig @@ -20,10 +20,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP -config SECURE_IOU - bool "Configure ZynqMP secure IOU" - default n - config ZYNQMP_USB bool "Configure ZynqMP USB" diff --git a/arch/arm/cpu/armv8/zynqmp/clk.c b/arch/arm/cpu/armv8/zynqmp/clk.c index 9218586e94..690c72dd66 100644 --- a/arch/arm/cpu/armv8/zynqmp/clk.c +++ b/arch/arm/cpu/armv8/zynqmp/clk.c @@ -21,9 +21,27 @@ unsigned long get_uart_clk(int dev_id) return 48000; case ZYNQMP_CSU_VERSION_EP108: return 25000000; + case ZYNQMP_CSU_VERSION_QEMU: + return 133000000; } - return 133000000; + return 100000000; +} + +unsigned long zynqmp_get_system_timer_freq(void) +{ + u32 ver = zynqmp_get_silicon_version(); + + switch (ver) { + case ZYNQMP_CSU_VERSION_VELOCE: + return 10000; + case ZYNQMP_CSU_VERSION_EP108: + return 4000000; + case ZYNQMP_CSU_VERSION_QEMU: + return 50000000; + } + + return 100000000; } #ifdef CONFIG_CLOCKS diff --git a/arch/arm/cpu/armv8/zynqmp/cpu.c b/arch/arm/cpu/armv8/zynqmp/cpu.c index f90cca36aa..c71f29152d 100644 --- a/arch/arm/cpu/armv8/zynqmp/cpu.c +++ b/arch/arm/cpu/armv8/zynqmp/cpu.c @@ -15,8 +15,22 @@ DECLARE_GLOBAL_DATA_PTR; +static unsigned int zynqmp_get_silicon_version_secure(void) +{ + u32 ver; + + ver = readl(&csu_base->version); + ver &= ZYNQMP_SILICON_VER_MASK; + ver >>= ZYNQMP_SILICON_VER_SHIFT; + + return ver; +} + unsigned int zynqmp_get_silicon_version(void) { + if (current_el() == 3) + return zynqmp_get_silicon_version_secure(); + gd->cpu_clk = get_tbclk(); switch (gd->cpu_clk) { @@ -24,9 +38,11 @@ unsigned int zynqmp_get_silicon_version(void) return ZYNQMP_CSU_VERSION_VELOCE; case 50000000: return ZYNQMP_CSU_VERSION_QEMU; + case 4000000: + return ZYNQMP_CSU_VERSION_EP108; } - return ZYNQMP_CSU_VERSION_EP108; + return ZYNQMP_CSU_VERSION_SILICON; } #ifndef CONFIG_SYS_DCACHE_OFF diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 83be51ae9d..2d786f0fd1 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -234,7 +234,7 @@ interrupt-parent = <&intc>; interrupts = <0 24 4>; reg = <0xe0100000 0x1000>; - } ; + }; sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; @@ -244,7 +244,7 @@ interrupt-parent = <&intc>; interrupts = <0 47 4>; reg = <0xe0101000 0x1000>; - } ; + }; slcr: slcr@f8000000 { #address-cells = <1>; @@ -326,11 +326,11 @@ scutimer: timer@f8f00600 { interrupt-parent = <&intc>; - interrupts = < 1 13 0x301 >; + interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; - reg = < 0xf8f00600 0x20 >; + reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; - } ; + }; usb0: usb@e0002000 { compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index 07e2b7a738..b6982c0c45 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -21,9 +21,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; - linux,stdout-path = &uart1; - stdout-path = &uart1; + bootargs = "root=/dev/ram rw earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts index 77e3bb0e63..4fed221536 100644 --- a/arch/arm/dts/zynq-zc770-xm011.dts +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -18,9 +18,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; - linux,stdout-path = &uart1; - stdout-path = &uart1; + bootargs = "root=/dev/ram rw earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -34,12 +33,6 @@ }; }; -&spi0 { - status = "okay"; - num-cs = <4>; - is-decoded-cs = <0>; -}; - &can0 { status = "okay"; }; @@ -54,6 +47,12 @@ }; }; +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + &uart1 { u-boot,dm-pre-reloc; status = "okay"; diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 3e1769acb5..8d69f0e0f5 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -20,9 +20,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; - linux,stdout-path = &uart1; - stdout-path = &uart1; + bootargs = "root=/dev/ram rw earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -31,12 +30,6 @@ }; }; -&spi1 { - status = "okay"; - num-cs = <4>; - is-decoded-cs = <0>; -}; - &can1 { status = "okay"; }; @@ -61,6 +54,12 @@ }; }; +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + &uart1 { u-boot,dm-pre-reloc; status = "okay"; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 288e248374..77fdfcc009 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -20,9 +20,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; - linux,stdout-path = &uart0; - stdout-path = &uart0; + bootargs = "root=/dev/ram rw earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -31,21 +30,6 @@ }; }; -&spi0 { - status = "okay"; - num-cs = <4>; - is-decoded-cs = <0>; - eeprom: at25@0 { - at25,byte-len = <8192>; - at25,addr-mode = <2>; - at25,page-size = <32>; - - compatible = "atmel,at25"; - reg = <2>; - spi-max-frequency = <1000000>; - }; -}; - &can1 { status = "okay"; }; @@ -74,6 +58,21 @@ }; }; +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + eeprom: at25@0 { + at25,byte-len = <8192>; + at25,addr-mode = <2>; + at25,page-size = <32>; + + compatible = "atmel,at25"; + reg = <2>; + spi-max-frequency = <1000000>; + }; +}; + &uart0 { u-boot,dm-pre-reloc; status = "okay"; diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts index 4481bd07c9..754604ea72 100644 --- a/arch/arm/dts/zynqmp-ep108.dts +++ b/arch/arm/dts/zynqmp-ep108.dts @@ -41,7 +41,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0{ + phy0: phy@0 { reg = <0>; max-speed = <100>; }; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 24a34e6d85..8733604a57 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -520,7 +520,7 @@ }; uart0: serial@ff000000 { - compatible = "cdns,uart-r1p8"; + compatible = "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 21 4>; @@ -529,7 +529,7 @@ }; uart1: serial@ff010000 { - compatible = "cdns,uart-r1p8"; + compatible = "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 22 4>; @@ -559,7 +559,7 @@ compatible = "cdns,wdt-r1p2"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 52 1>; + interrupts = <0 113 1>; reg = <0x0 0xfd4d0000 0x1000>; timeout-sec = <10>; }; diff --git a/arch/arm/include/asm/arch-zynqmp/clk.h b/arch/arm/include/asm/arch-zynqmp/clk.h index d55bc31c43..b18333d1ca 100644 --- a/arch/arm/include/asm/arch-zynqmp/clk.h +++ b/arch/arm/include/asm/arch-zynqmp/clk.h @@ -9,5 +9,6 @@ #define _ASM_ARCH_CLK_H_ unsigned long get_uart_clk(int dev_id); +unsigned long zynqmp_get_system_timer_freq(void); #endif /* _ASM_ARCH_CLK_H_ */ diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index bbf89d9dd7..587938249e 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -41,11 +41,8 @@ struct crlapb_regs { #define crlapb_base ((struct crlapb_regs *)ZYNQMP_CRL_APB_BASEADDR) -#if defined(CONFIG_SECURE_IOU) -#define ZYNQMP_IOU_SCNTR 0xFF260000 -#else +#define ZYNQMP_IOU_SCNTR_SECURE 0xFF260000 #define ZYNQMP_IOU_SCNTR 0xFF250000 -#endif #define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN 0x1 #define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG 0x2 @@ -57,9 +54,21 @@ struct iou_scntr { #define iou_scntr ((struct iou_scntr *)ZYNQMP_IOU_SCNTR) +struct iou_scntr_secure { + u32 counter_control_register; + u32 reserved0[7]; + u32 base_frequency_id_register; +}; + +#define iou_scntr_secure ((struct iou_scntr_secure *)ZYNQMP_IOU_SCNTR_SECURE) + /* Bootmode setting values */ #define BOOT_MODES_MASK 0x0000000F -#define SD_MODE 0x00000003 +#define QSPI_MODE_24BIT 0x00000001 +#define QSPI_MODE_32BIT 0x00000002 +#define SD_MODE 0x00000003 /* sd 0 */ +#define SD_MODE1 0x00000005 /* sd 1 */ +#define NAND_MODE 0x00000004 #define EMMC_MODE 0x00000006 #define JTAG_MODE 0x00000000 @@ -106,9 +115,20 @@ struct apu_regs { #define apu_base ((struct apu_regs *)ZYNQMP_APU_BASEADDR) /* Board version value */ +#define ZYNQMP_CSU_BASEADDR 0xFFCA0000 #define ZYNQMP_CSU_VERSION_SILICON 0x0 #define ZYNQMP_CSU_VERSION_EP108 0x1 #define ZYNQMP_CSU_VERSION_VELOCE 0x2 #define ZYNQMP_CSU_VERSION_QEMU 0x3 +#define ZYNQMP_SILICON_VER_MASK 0xF000 +#define ZYNQMP_SILICON_VER_SHIFT 12 + +struct csu_regs { + u32 reserved0[17]; + u32 version; +}; + +#define csu_base ((struct csu_regs *)ZYNQMP_CSU_BASEADDR) + #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-zynq/ddrc.c b/arch/arm/mach-zynq/ddrc.c index 5b20accbcb..d74f8dbbc4 100644 --- a/arch/arm/mach-zynq/ddrc.c +++ b/arch/arm/mach-zynq/ddrc.c @@ -42,8 +42,6 @@ void zynq_ddrc_init(void) */ /* cppcheck-suppress nullPointer */ memset((void *)0, 0, 1 * 1024 * 1024); - - gd->ram_size /= 2; } else { puts("ECC disabled "); } diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 604f6815af..30ea484f48 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -13,6 +13,7 @@ config TARGET_MICROBLAZE_GENERIC select SUPPORT_SPL select OF_CONTROL select DM + select DM_SERIAL endchoice diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile index 4955e81236..069721033f 100644 --- a/arch/microblaze/cpu/Makefile +++ b/arch/microblaze/cpu/Makefile @@ -7,5 +7,5 @@ extra-y = start.o obj-y = irq.o -obj-y += cpu.o interrupts.o cache.o exception.o timer.o +obj-y += interrupts.o cache.o exception.o timer.o obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/arch/microblaze/cpu/cpu.c b/arch/microblaze/cpu/cpu.c deleted file mode 100644 index 8e459d807f..0000000000 --- a/arch/microblaze/cpu/cpu.c +++ /dev/null @@ -1,9 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* EMPTY FILE */ diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 206be3e3ee..e9923b65ef 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -155,6 +155,10 @@ clear_bss: cmp r6, r5, r4 /* check if we have reach the end */ bnei r6, 2b 3: /* jumping to board_init */ +#ifdef CONFIG_DEBUG_UART + bralid r15, debug_uart_init + nop +#endif #ifndef CONFIG_SPL_BUILD or r5, r0, r0 /* flags - empty */ addi r31, r0, _gd diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index efd316573c..36af1b9419 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -55,12 +55,6 @@ config TARGET_YOSEMITE config TARGET_YUCCA bool "Support yucca" -config TARGET_FX12MM - bool "Support fx12mm" - -config TARGET_V5FX30TEVAL - bool "Support v5fx30teval" - config TARGET_CPCI2DP bool "Support CPCI2DP" @@ -115,14 +109,19 @@ config TARGET_PIP405 config TARGET_XPEDITE1000 bool "Support xpedite1000" -config TARGET_ML507 - bool "Support ml507" - config TARGET_XILINX_PPC405_GENERIC bool "Support xilinx-ppc405-generic" + select SUPPORT_SPL + select OF_CONTROL + select DM + select DM_SERIAL config TARGET_XILINX_PPC440_GENERIC bool "Support xilinx-ppc440-generic" + select SUPPORT_SPL + select OF_CONTROL + select DM + select DM_SERIAL endchoice @@ -139,8 +138,6 @@ source "board/amcc/sequoia/Kconfig" source "board/amcc/walnut/Kconfig" source "board/amcc/yosemite/Kconfig" source "board/amcc/yucca/Kconfig" -source "board/avnet/fx12mm/Kconfig" -source "board/avnet/v5fx30teval/Kconfig" source "board/esd/cpci2dp/Kconfig" source "board/esd/cpci405/Kconfig" source "board/esd/plu405/Kconfig" @@ -158,7 +155,6 @@ source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" source "board/t3corp/Kconfig" source "board/xes/xpedite1000/Kconfig" -source "board/xilinx/ml507/Kconfig" source "board/xilinx/ppc405-generic/Kconfig" source "board/xilinx/ppc440-generic/Kconfig" diff --git a/arch/powerpc/cpu/ppc4xx/interrupts.c b/arch/powerpc/cpu/ppc4xx/interrupts.c index d9b565468b..45997d6eae 100644 --- a/arch/powerpc/cpu/ppc4xx/interrupts.c +++ b/arch/powerpc/cpu/ppc4xx/interrupts.c @@ -9,7 +9,7 @@ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com * * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX) - * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * Work supported by Qtechnology (htpp://qtec.com) * * SPDX-License-Identifier: GPL-2.0+ diff --git a/arch/powerpc/cpu/ppc4xx/uic.c b/arch/powerpc/cpu/ppc4xx/uic.c index bd955ed83f..fb453b1adf 100644 --- a/arch/powerpc/cpu/ppc4xx/uic.c +++ b/arch/powerpc/cpu/ppc4xx/uic.c @@ -9,7 +9,7 @@ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com * * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX) - * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * Work supported by Qtechnology (htpp://qtec.com) * * SPDX-License-Identifier: GPL-2.0+ diff --git a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c index 71e1be02a6..1a2e917eb2 100644 --- a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c +++ b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de * SPDX-License-Identifier: GPL-2.0+ diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index 5d9f5c2822..80b4c0c4e3 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -3,6 +3,8 @@ # dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb +dtb-$(CONFIG_TARGET_XILINX_PPC440_GENERIC) += xilinx-ppc440-generic.dtb +dtb-$(CONFIG_TARGET_XILINX_PPC405_GENERIC) += xilinx-ppc405-generic.dtb targets += $(dtb-y) diff --git a/arch/powerpc/dts/xilinx-ppc405-generic.dts b/arch/powerpc/dts/xilinx-ppc405-generic.dts new file mode 100644 index 0000000000..64983216b5 --- /dev/null +++ b/arch/powerpc/dts/xilinx-ppc405-generic.dts @@ -0,0 +1,15 @@ +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &uart0; + }; + + uart0: serial@84000000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + interrupts = <0 0>; + reg = <0x84000000 0x10000>; + }; +} ; diff --git a/arch/powerpc/dts/xilinx-ppc440-generic.dts b/arch/powerpc/dts/xilinx-ppc440-generic.dts new file mode 100644 index 0000000000..c83523a5a4 --- /dev/null +++ b/arch/powerpc/dts/xilinx-ppc440-generic.dts @@ -0,0 +1,15 @@ +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &uart0; + }; + + uart0: serial@8b000000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + interrupts = <0 0>; + reg = <0x8b000000 0x10000>; + }; +} ; diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h index 1a6a93384e..9f370dd83c 100644 --- a/arch/powerpc/include/asm/interrupt.h +++ b/arch/powerpc/include/asm/interrupt.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de * diff --git a/arch/powerpc/include/asm/xilinx_irq.h b/arch/powerpc/include/asm/xilinx_irq.h index 333a0372b7..5766bde366 100644 --- a/arch/powerpc/include/asm/xilinx_irq.h +++ b/arch/powerpc/include/asm/xilinx_irq.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de * SPDX-License-Identifier: GPL-2.0+ diff --git a/board/avnet/fx12mm/Kconfig b/board/avnet/fx12mm/Kconfig deleted file mode 100644 index 0b67ebde93..0000000000 --- a/board/avnet/fx12mm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_FX12MM - -config SYS_BOARD - default "fx12mm" - -config SYS_VENDOR - default "avnet" - -config SYS_CONFIG_NAME - default "fx12mm" - -endif diff --git a/board/avnet/fx12mm/MAINTAINERS b/board/avnet/fx12mm/MAINTAINERS deleted file mode 100644 index c92e258df9..0000000000 --- a/board/avnet/fx12mm/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -FX12MM BOARD -M: Georg Schardt <schardt@team-ctech.de> -S: Maintained -F: board/avnet/fx12mm/ -F: include/configs/fx12mm.h -F: configs/fx12mm_defconfig -F: configs/fx12mm_flash_defconfig diff --git a/board/avnet/fx12mm/Makefile b/board/avnet/fx12mm/Makefile deleted file mode 100644 index 618b42f891..0000000000 --- a/board/avnet/fx12mm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += fx12mm.o - -include $(srctree)/board/xilinx/ppc405-generic/Makefile diff --git a/board/avnet/fx12mm/fx12mm.c b/board/avnet/fx12mm/fx12mm.c deleted file mode 100644 index 92e1cfb75f..0000000000 --- a/board/avnet/fx12mm/fx12mm.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Author: Xilinx Inc. - * - * Modified by: - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - -int checkboard(void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - if (l < 0) { - printf("Avnet Virtex4 FX12 with no serial #"); - } else { - printf("Avnet Virtex4 FX12 Minimodul # "); - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc(buf[i]); - } - } - putc('\n'); - return 0; -} diff --git a/board/avnet/fx12mm/xparameters.h b/board/avnet/fx12mm/xparameters.h deleted file mode 100644 index 94f682f8ec..0000000000 --- a/board/avnet/fx12mm/xparameters.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * CAUTION: This file is based on the xparameters.h automatically - * generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5 - */ - -#ifndef __XPARAMETER_H__ -#define __XPARAMETER_H__ - -/* RS232 */ -#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 -#define XPAR_UARTNS550_0_BASEADDR 0x83E00000 - - -/* INT_C */ -#define XPAR_XPS_INTC_0_DEVICE_ID 0 -#define XPAR_XPS_INTC_0_BASEADDR 0x81800000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2 - -/* CPU core clock */ -#define XPAR_CORE_CLOCK_FREQ_HZ 300000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 - -/* RAM */ -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 - -/* FLASH */ -#define XPAR_FLASH_MEM0_BASEADDR 0xFFC00000 - -#endif diff --git a/board/avnet/v5fx30teval/Kconfig b/board/avnet/v5fx30teval/Kconfig deleted file mode 100644 index 079387b707..0000000000 --- a/board/avnet/v5fx30teval/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_V5FX30TEVAL - -config SYS_BOARD - default "v5fx30teval" - -config SYS_VENDOR - default "avnet" - -config SYS_CONFIG_NAME - default "v5fx30teval" - -endif diff --git a/board/avnet/v5fx30teval/MAINTAINERS b/board/avnet/v5fx30teval/MAINTAINERS deleted file mode 100644 index 91dde7a5c8..0000000000 --- a/board/avnet/v5fx30teval/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -V5FX30TEVAL BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> -S: Maintained -F: board/avnet/v5fx30teval/ -F: include/configs/v5fx30teval.h -F: configs/v5fx30teval_defconfig -F: configs/v5fx30teval_flash_defconfig diff --git a/board/avnet/v5fx30teval/Makefile b/board/avnet/v5fx30teval/Makefile deleted file mode 100644 index 8c41af02d4..0000000000 --- a/board/avnet/v5fx30teval/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += v5fx30teval.o - -include $(srctree)/board/xilinx/ppc440-generic/Makefile diff --git a/board/avnet/v5fx30teval/v5fx30teval.c b/board/avnet/v5fx30teval/v5fx30teval.c deleted file mode 100644 index 68b0eb959d..0000000000 --- a/board/avnet/v5fx30teval/v5fx30teval.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - - -int checkboard(void) -{ - puts("Avnet Virtex 5 FX30 Evaluation Board\n"); - return 0; -} diff --git a/board/avnet/v5fx30teval/xparameters.h b/board/avnet/v5fx30teval/xparameters.h deleted file mode 100644 index 95b8c285ad..0000000000 --- a/board/avnet/v5fx30teval/xparameters.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * based on xparameters.h by Xilinx - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFF000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index dfa6293222..ccd4ec955b 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -12,7 +12,6 @@ #include <common.h> #include <config.h> #include <fdtdec.h> -#include <netdev.h> #include <asm/processor.h> #include <asm/microblaze_intc.h> #include <asm/asm.h> @@ -24,7 +23,6 @@ DECLARE_GLOBAL_DATA_PTR; static int reset_pin = -1; #endif -#if CONFIG_IS_ENABLED(OF_CONTROL) ulong ram_base; void dram_init_banksize(void) @@ -58,14 +56,6 @@ int dram_init(void) return 0; }; -#else -int dram_init(void) -{ - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; - - return 0; -} -#endif int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -86,7 +76,7 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int gpio_init (void) +static int gpio_init(void) { #ifdef CONFIG_XILINX_GPIO reset_pin = gpio_alloc(CONFIG_SYS_GPIO_0_ADDR, "reset", 1); @@ -96,32 +86,9 @@ int gpio_init (void) return 0; } -void board_init(void) +int board_late_init(void) { gpio_init(); -} -int board_eth_init(bd_t *bis) -{ - int ret = 0; - -#ifdef CONFIG_XILINX_AXIEMAC - ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, - XILINX_AXIDMA_BASEADDR); -#endif - -#if defined(CONFIG_XILINX_EMACLITE) && defined(XILINX_EMACLITE_BASEADDR) - u32 txpp = 0; - u32 rxpp = 0; -# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG - txpp = 1; -# endif -# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG - rxpp = 1; -# endif - ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, - txpp, rxpp); -#endif - - return ret; + return 0; } diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h index 8ba146cb88..ccb528ed92 100644 --- a/board/xilinx/microblaze-generic/xparameters.h +++ b/board/xilinx/microblaze-generic/xparameters.h @@ -28,15 +28,6 @@ #define XILINX_TIMER_BASEADDR 0x41c00000 #define XILINX_TIMER_IRQ 0 -/* Uart pheriphery is RS232_Uart */ -#define XILINX_UARTLITE_BASEADDR 0x40600000 -#define XILINX_UARTLITE_BAUDRATE 115200 - -/* IIC pheriphery is IIC_EEPROM */ -#define XILINX_IIC_0_BASEADDR 0x40800000 -#define XILINX_IIC_0_FREQ 100000 -#define XILINX_IIC_0_BIT 0 - /* GPIO is LEDs_4Bit*/ #define XILINX_GPIO_BASEADDR 0x40000000 @@ -44,18 +35,6 @@ #define XILINX_FLASH_START 0x2c000000 #define XILINX_FLASH_SIZE 0x00800000 -/* Main Memory is DDR_SDRAM_64Mx32 */ -#define XILINX_RAM_START 0x28000000 -#define XILINX_RAM_SIZE 0x04000000 - -/* Sysace Controller is SysACE_CompactFlash */ -#define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180ffff -#define XILINX_SYSACE_MEM_WIDTH 16 - -/* Ethernet controller is Ethernet_MAC */ -#define XILINX_EMACLITE_BASEADDR 0x40C00000 - /* Watchdog IP is wxi_timebase_wdt_0 */ #define XILINX_WATCHDOG_BASEADDR 0x50000000 #define XILINX_WATCHDOG_IRQ 1 diff --git a/board/xilinx/ml507/Kconfig b/board/xilinx/ml507/Kconfig deleted file mode 100644 index d580a7beaf..0000000000 --- a/board/xilinx/ml507/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ML507 - -config SYS_BOARD - default "ml507" - -config SYS_VENDOR - default "xilinx" - -config SYS_CONFIG_NAME - default "ml507" - -endif diff --git a/board/xilinx/ml507/MAINTAINERS b/board/xilinx/ml507/MAINTAINERS deleted file mode 100644 index 8b40f44500..0000000000 --- a/board/xilinx/ml507/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -ML507 BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> -S: Maintained -F: board/xilinx/ml507/ -F: include/configs/ml507.h -F: configs/ml507_defconfig -F: configs/ml507_flash_defconfig diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile deleted file mode 100644 index 9a3809f3c0..0000000000 --- a/board/xilinx/ml507/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ml507.o - -include $(srctree)/board/xilinx/ppc440-generic/Makefile diff --git a/board/xilinx/ml507/ml507.c b/board/xilinx/ml507/ml507.c deleted file mode 100644 index 83b764b733..0000000000 --- a/board/xilinx/ml507/ml507.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - - -int checkboard(void) -{ - puts("Xilinx ML507 Board\n"); - return 0; -} diff --git a/board/xilinx/ml507/xparameters.h b/board/xilinx/ml507/xparameters.h deleted file mode 100644 index e30e592bbe..0000000000 --- a/board/xilinx/ml507/xparameters.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * based on xparameters-ml507.h by Xilinx - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif diff --git a/board/xilinx/ppc405-generic/MAINTAINERS b/board/xilinx/ppc405-generic/MAINTAINERS index 2b0c98dc8b..ba48f50c29 100644 --- a/board/xilinx/ppc405-generic/MAINTAINERS +++ b/board/xilinx/ppc405-generic/MAINTAINERS @@ -1,5 +1,5 @@ PPC405-GENERIC BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> +M: Ricardo Ribalda <ricardo.ribalda@gmail.com> S: Maintained F: board/xilinx/ppc405-generic/ F: include/configs/xilinx-ppc405-generic.h diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile index c9da870657..2800f68626 100644 --- a/board/xilinx/ppc405-generic/Makefile +++ b/board/xilinx/ppc405-generic/Makefile @@ -3,10 +3,10 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com # Work supported by Qtechnology http://www.qtec.com # # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o +obj-y += xilinx_ppc405_generic.o diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c index e3dd468f1e..3729f07624 100644 --- a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c +++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * SPDX-License-Identifier: GPL-2.0+ @@ -10,39 +10,32 @@ #include <common.h> #include <asm/processor.h> -ulong __get_PCI_freq(void) +ulong get_PCI_freq(void) { return 0; } -ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq"))); - -int __board_pre_init(void) -{ - return 0; -} -int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); - -int __checkboard(void) +int checkboard(void) { puts("Xilinx PPC405 Generic Board\n"); return 0; } -int checkboard(void) __attribute__((weak, alias("__checkboard"))); -phys_size_t __initdram(int board_type) +phys_size_t initdram(int board_type) { return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); } -phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); -void __get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { - sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; - sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; - sysInfo->freqPCI = 0; + sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sys_info->freqPCI = 0; return; } -void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info"))); + +int get_serial_clock(void){ + return XPAR_UARTNS550_0_CLOCK_FREQ_HZ; +} diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h index f0ff78fca5..c3df9e5109 100644 --- a/board/xilinx/ppc405-generic/xparameters.h +++ b/board/xilinx/ppc405-generic/xparameters.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * based on xparameters-ml507.h by Xilinx * @@ -14,12 +14,11 @@ #define XPAR_IIC_EEPROM_BASEADDR 0x81600000 #define XPAR_INTC_0_BASEADDR 0x81800000 #define XPAR_SPI_0_BASEADDR 0x83400000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 #define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 #define XPAR_PLB_CLOCK_FREQ_HZ 100000000 #define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 32 #define XPAR_SPI_0_NUM_TRANSFER_BITS 8 +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 #endif diff --git a/board/xilinx/ppc440-generic/MAINTAINERS b/board/xilinx/ppc440-generic/MAINTAINERS index 2d0b11af91..0258c8204a 100644 --- a/board/xilinx/ppc440-generic/MAINTAINERS +++ b/board/xilinx/ppc440-generic/MAINTAINERS @@ -1,5 +1,5 @@ PPC440-GENERIC BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> +M: Ricardo Ribalda <ricardo.ribalda@gmail.com> S: Maintained F: board/xilinx/ppc440-generic/ F: include/configs/xilinx-ppc440-generic.h diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile index 0acd95d6e4..4d5f41029a 100644 --- a/board/xilinx/ppc440-generic/Makefile +++ b/board/xilinx/ppc440-generic/Makefile @@ -3,11 +3,11 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com # Work supported by Qtechnology http://www.qtec.com # # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o -extra-y += ../../xilinx/ppc440-generic/init.o +obj-y += xilinx_ppc440_generic.o +extra-y += init.o diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S index 4598a37684..f9ff35f51b 100644 --- a/board/xilinx/ppc440-generic/init.S +++ b/board/xilinx/ppc440-generic/init.S @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * SPDX-License-Identifier: GPL-2.0+ diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c index 74df2f4ff7..d823352930 100644 --- a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * SPDX-License-Identifier: GPL-2.0+ @@ -8,34 +8,51 @@ #include <config.h> #include <common.h> +#include <netdev.h> #include <asm/processor.h> -int __board_pre_init(void) -{ - return 0; -} -int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); - -int __checkboard(void) +int checkboard(void) { puts("Xilinx PPC440 Generic Board\n"); return 0; } -int checkboard(void) __attribute__((weak, alias("__checkboard"))); -phys_size_t __initdram(int board_type) +phys_size_t initdram(int board_type) { return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); } -phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); -void __get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { - sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; - sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; - sysInfo->freqPCI = 0; + sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sys_info->freqPCI = 0; return; } -void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info"))); + +int get_serial_clock(void){ + return XPAR_UARTNS550_0_CLOCK_FREQ_HZ; +} + +int board_eth_init(bd_t *bis) +{ + int ret = 0; + + puts("Init xilinx temac\n"); +#ifdef XPAR_LLTEMAC_0_BASEADDR + ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR, + XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB, + XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR); + +#endif + +#ifdef XPAR_LLTEMAC_1_BASEADDR + ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR, + XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB, + XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR); +#endif + + return ret; +} diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h index e30e592bbe..b45a6a1d76 100644 --- a/board/xilinx/ppc440-generic/xparameters.h +++ b/board/xilinx/ppc440-generic/xparameters.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * based on xparameters-ml507.h by Xilinx * @@ -12,12 +12,15 @@ #define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 #define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 +#define XPAR_INTC_0_BASEADDR 0x87000000 +#define XPAR_FLASH_MEM0_BASEADDR 0xF0000000 #define XPAR_PLB_CLOCK_FREQ_HZ 100000000 #define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 32 +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 +#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80 +#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98 +#define XPAR_LLTEMAC_0_BASEADDR 0x83000000 +#define XPAR_LLTEMAC_1_BASEADDR 0x83000040 #endif diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 414f5302a0..01bae5d67e 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -8,7 +8,6 @@ #include <fdtdec.h> #include <fpga.h> #include <mmc.h> -#include <netdev.h> #include <zynqpl.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> @@ -94,34 +93,11 @@ int board_late_init(void) #ifdef CONFIG_DISPLAY_BOARDINFO int checkboard(void) { - puts("Board:\tXilinx Zynq\n"); + puts("Board: Xilinx Zynq\n"); return 0; } #endif -int board_eth_init(bd_t *bis) -{ - u32 ret = 0; - -#ifdef CONFIG_XILINX_AXIEMAC - ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, - XILINX_AXIDMA_BASEADDR); -#endif -#ifdef CONFIG_XILINX_EMACLITE - u32 txpp = 0; - u32 rxpp = 0; -# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG - txpp = 1; -# endif -# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG - rxpp = 1; -# endif - ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, - txpp, rxpp); -#endif - return ret; -} - int dram_init(void) { #if CONFIG_IS_ENABLED(OF_CONTROL) diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 2cf47125d4..44d347ed3b 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -9,6 +9,7 @@ #include <netdev.h> #include <ahci.h> #include <scsi.h> +#include <asm/arch/clk.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> @@ -28,10 +29,18 @@ int board_early_init_r(void) { u32 val; - val = readl(&crlapb_base->timestamp_ref_ctrl); - val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; - writel(val, &crlapb_base->timestamp_ref_ctrl); - + if (current_el() == 3) { + val = readl(&crlapb_base->timestamp_ref_ctrl); + val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; + writel(val, &crlapb_base->timestamp_ref_ctrl); + + /* Program freq register in System counter */ + writel(zynqmp_get_system_timer_freq(), + &iou_scntr_secure->base_frequency_id_register); + /* And enable system counter */ + writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, + &iou_scntr_secure->counter_control_register); + } /* Program freq register in System counter and enable system counter */ writel(gd->cpu_clk, &iou_scntr->base_frequency_id_register); writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG | @@ -48,11 +57,6 @@ int dram_init(void) return 0; } -int timer_init(void) -{ - return 0; -} - void reset_cpu(ulong addr) { } @@ -73,11 +77,36 @@ int board_late_init(void) reg = readl(&crlapb_base->boot_mode); bootmode = reg & BOOT_MODES_MASK; + puts("Bootmode: "); switch (bootmode) { - case SD_MODE: + case JTAG_MODE: + puts("JTAG_MODE\n"); + setenv("modeboot", "jtagboot"); + break; + case QSPI_MODE_24BIT: + case QSPI_MODE_32BIT: + setenv("modeboot", "qspiboot"); + puts("QSPI_MODE\n"); + break; case EMMC_MODE: + puts("EMMC_MODE\n"); + setenv("modeboot", "sdboot"); + break; + case SD_MODE: + puts("SD_MODE\n"); setenv("modeboot", "sdboot"); break; + case SD_MODE1: + puts("SD_MODE1\n"); +#if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1) + setenv("sdbootdev", "1"); +#endif + setenv("modeboot", "sdboot"); + break; + case NAND_MODE: + puts("NAND_MODE\n"); + setenv("modeboot", "nandboot"); + break; default: printf("Invalid Boot Mode:0x%x\n", bootmode); break; @@ -88,7 +117,7 @@ int board_late_init(void) int checkboard(void) { - puts("Board:\tXilinx ZynqMP\n"); + puts("Board: Xilinx ZynqMP\n"); return 0; } diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index deed6d8255..8eda68b4f9 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -205,7 +205,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("sram start ", (ulong)bd->bi_sramstart); print_num("sram size ", (ulong)bd->bi_sramsize); #endif -#if defined(CONFIG_CMD_NET) +#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH) print_eths(); #endif printf("baudrate = %u bps\n", gd->baudrate); diff --git a/cmd/fpga.c b/cmd/fpga.c index 7f99aabf8a..8956eb1b65 100644 --- a/cmd/fpga.c +++ b/cmd/fpga.c @@ -86,7 +86,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) debug("* fpga: cmdline image address = 0x%08lx\n", (ulong)fpga_data); } - debug("%s: fpga_data = 0x%x\n", __func__, (uint)fpga_data); + debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data); case 3: /* fpga <op> <dev | data addr> */ dev = (int)simple_strtoul(argv[2], NULL, 16); @@ -107,13 +107,13 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } else #endif { - fpga_data = (void *)dev; + fpga_data = (void *)(uintptr_t)dev; debug("* fpga: cmdline image addr = 0x%08lx\n", (ulong)fpga_data); } - debug("%s: fpga_data = 0x%x\n", - __func__, (uint)fpga_data); + debug("%s: fpga_data = 0x%lx\n", + __func__, (ulong)fpga_data); dev = FPGA_INVALID_DEVICE; /* reset device num */ } diff --git a/configs/fx12mm_defconfig b/configs/fx12mm_defconfig deleted file mode 100644 index c714d0d35e..0000000000 --- a/configs/fx12mm_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_FX12MM=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o" -CONFIG_SYS_PROMPT="FX12MM:/# " -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_NS16550=y diff --git a/configs/fx12mm_flash_defconfig b/configs/fx12mm_flash_defconfig deleted file mode 100644 index ac3841260d..0000000000 --- a/configs/fx12mm_flash_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_FX12MM=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_NS16550=y diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index ed336e6bc4..39c2ad2813 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -1,10 +1,24 @@ CONFIG_MICROBLAZE=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_DM=y CONFIG_TARGET_MICROBLAZE_GENERIC=y CONFIG_SYS_TEXT_BASE=0x29000000 CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot-mONStR> " CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_NETCONSOLE=y +CONFIG_DM_ETH=y +CONFIG_XILINX_AXIEMAC=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SYS_NS16550=y +CONFIG_XILINX_UARTLITE=y diff --git a/configs/ml507_defconfig b/configs/ml507_defconfig deleted file mode 100644 index d1e4e30371..0000000000 --- a/configs/ml507_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ML507=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" -CONFIG_SYS_PROMPT="ml507:/# " -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/ml507_flash_defconfig b/configs/ml507_flash_defconfig deleted file mode 100644 index 442e0ce1fa..0000000000 --- a/configs/ml507_flash_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ML507=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/v5fx30teval_defconfig b/configs/v5fx30teval_defconfig deleted file mode 100644 index 3e2ce7d2fe..0000000000 --- a/configs/v5fx30teval_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_V5FX30TEVAL=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" -CONFIG_SYS_PROMPT="v5fx30t:/# " -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/v5fx30teval_flash_defconfig b/configs/v5fx30teval_flash_defconfig deleted file mode 100644 index b9b05e8b39..0000000000 --- a/configs/v5fx30teval_flash_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_V5FX30TEVAL=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/xilinx-ppc405-generic_defconfig b/configs/xilinx-ppc405-generic_defconfig index 53fafc324e..e7132cd611 100644 --- a/configs/xilinx-ppc405-generic_defconfig +++ b/configs/xilinx-ppc405-generic_defconfig @@ -7,3 +7,11 @@ CONFIG_SYS_PROMPT="xlx-ppc405:/# " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set +CONFIG_SYS_MALLOC_SIMPLE=y +CONFIG_XILINX_UARTLITE=y +CONFIG_SYS_NS16550=y +CONFIG_OF_EMBED=y +CONFIG_OF_CONTROL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic" diff --git a/configs/xilinx-ppc405-generic_flash_defconfig b/configs/xilinx-ppc405-generic_flash_defconfig deleted file mode 100644 index 37084fb0a8..0000000000 --- a/configs/xilinx-ppc405-generic_flash_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_XILINX_PPC405_GENERIC=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/xilinx-ppc440-generic_defconfig b/configs/xilinx-ppc440-generic_defconfig index 79be48a995..3bf2c4f8b8 100644 --- a/configs/xilinx-ppc440-generic_defconfig +++ b/configs/xilinx-ppc440-generic_defconfig @@ -3,7 +3,15 @@ CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC440_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1" CONFIG_SYS_PROMPT="board:/# " -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set +CONFIG_SYS_MALLOC_SIMPLE=y +CONFIG_XILINX_UARTLITE=y +CONFIG_SYS_NS16550=y +CONFIG_OF_EMBED=y +CONFIG_OF_CONTROL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic" +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_NETCONSOLE=y diff --git a/configs/xilinx-ppc440-generic_flash_defconfig b/configs/xilinx-ppc440-generic_flash_defconfig deleted file mode 100644 index 629903344b..0000000000 --- a/configs/xilinx-ppc440-generic_flash_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_XILINX_PPC440_GENERIC=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 30995babd4..a3a66ec41a 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 339e399889..fbc603fd95 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_PICOZED=y CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed" CONFIG_SPL=y +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 065f855194..3540653e22 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y @@ -12,6 +13,7 @@ CONFIG_CMD_GPIO=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 1059689aad..f333b7a2bf 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y @@ -13,6 +14,7 @@ CONFIG_CMD_GPIO=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index a9dbda5eaa..ebfdeb098b 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -7,6 +7,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y @@ -14,6 +15,7 @@ CONFIG_CMD_GPIO=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_SST=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 6ff00c64b4..2bc88b8dd2 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -7,6 +7,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011" +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 75d6c5531c..b0fa661064 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -7,6 +7,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" +CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index dd65929958..9672940e91 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -7,10 +7,13 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_ZYNQ_GEM=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 73b17e20b2..58680127aa 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -6,6 +6,7 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y @@ -13,6 +14,7 @@ CONFIG_CMD_GPIO=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 577c5a958e..ebaae49da1 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -6,17 +6,18 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y +CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y CONFIG_ZYNQ_GEM=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_SPANSION=y CONFIG_ZYNQ_QSPI=y diff --git a/doc/device-tree-bindings/serial/xilinx_uartlite.txt b/doc/device-tree-bindings/serial/xilinx_uartlite.txt new file mode 100644 index 0000000000..d15753c8c3 --- /dev/null +++ b/doc/device-tree-bindings/serial/xilinx_uartlite.txt @@ -0,0 +1,13 @@ +Binding for Xilinx Uartlite Controller + +Required properties: +- compatible : should be "xlnx,xps-uartlite-1.00.a", or "xlnx,opb-uartlite-1.00.b" +- reg: Should contain UART controller registers location and length. +- interrupts: Should contain UART controller interrupts. + +Example: + serial@40600000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + interrupts = <1 0>; + reg = <0x40600000 0x10000>; + }; diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt index c933b9081b..e5e482e30b 100644 --- a/doc/driver-model/serial-howto.txt +++ b/doc/driver-model/serial-howto.txt @@ -15,7 +15,6 @@ is time for maintainers to start converting over the remaining serial drivers: serial_pxa.c serial_s3c24x0.c serial_sa1100.c - serial_xuartlite.c usbtty.c You should complete this by the end of January 2016. diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index c765a74a25..d459a2f7a5 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -75,8 +75,8 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size, buffer[i] = *dataptr++; if (xdesc->name) { - i = strncmp(buffer, xdesc->name, strlen(xdesc->name)); - if (i) { + i = (ulong)strstr(buffer, xdesc->name); + if (!i) { printf("%s: Wrong bitstream ID for this device\n", __func__); printf("%s: Bitstream ID %s, current device ID %d/%s\n", diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c index fd05c17794..9b2c5b69ce 100644 --- a/drivers/hwmon/adt7460.c +++ b/drivers/hwmon/adt7460.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 02d71b9344..ff770b16e2 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -530,6 +530,10 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) if (caps & SDHCI_CAN_DO_8BIT) host->cfg.host_caps |= MMC_MODE_8BIT; } + + if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) + host->cfg.host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz); + if (host->host_caps) host->cfg.host_caps |= host->host_caps; diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 4fe3da93b2..039ec16e91 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -13,6 +13,10 @@ #include <malloc.h> #include <sdhci.h> +#ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ +# define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0 +#endif + static int arasan_sdhci_probe(struct udevice *dev) { struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); @@ -20,9 +24,15 @@ static int arasan_sdhci_probe(struct udevice *dev) host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B; + +#ifdef CONFIG_ZYNQ_HISPD_BROKEN + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; +#endif + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); - add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, 0); + add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, + CONFIG_ZYNQ_SDHCI_MIN_FREQ); upriv->mmc = host->mmc; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index de54ca8014..218e1fee22 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -102,6 +102,22 @@ config PCH_GBE This MAC is present in Intel Platform Controller Hub EG20T. It supports 10/100/1000 Mbps operation. +config XILINX_AXIEMAC + depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) + select PHYLIB + select MII + bool "Xilinx AXI Ethernet" + help + This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. + +config XILINX_EMACLITE + depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) + select PHYLIB + select MII + bool "Xilinx Ethernetlite" + help + This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. + config ZYNQ_GEM depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) select PHYLIB diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c index 541a57f980..c3912d52f3 100644 --- a/drivers/net/phy/ti.c +++ b/drivers/net/phy/ti.c @@ -41,6 +41,8 @@ /* PHY CTRL bits */ #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 +#define DP83867_MDI_CROSSOVER 5 +#define DP83867_MDI_CROSSOVER_AUTO 2 /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 @@ -149,6 +151,7 @@ static int dp83867_config(struct phy_device *phydev) if (phy_interface_is_rgmii(phydev)) { ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL, + (DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) | (FIFO_DEPTH << DP83867_PHYCR_FIFO_DEPTH_SHIFT)); if (ret) return ret; diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index df053feee8..81274ee13b 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -8,15 +8,14 @@ #include <config.h> #include <common.h> +#include <dm.h> #include <net.h> #include <malloc.h> #include <asm/io.h> #include <phy.h> #include <miiphy.h> -#if !defined(CONFIG_PHYLIB) -# error AXI_ETHERNET requires PHYLIB -#endif +DECLARE_GLOBAL_DATA_PTR; /* Link setup */ #define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ @@ -86,7 +85,8 @@ struct axidma_priv { struct axidma_reg *dmatx; struct axidma_reg *dmarx; int phyaddr; - + struct axi_regs *iobase; + phy_interface_t interface; struct phy_device *phydev; struct mii_dev *bus; }; @@ -147,9 +147,8 @@ struct axi_regs { */ #define PHY_DETECT_MASK 0x1808 -static inline int mdio_wait(struct eth_device *dev) +static inline int mdio_wait(struct axi_regs *regs) { - struct axi_regs *regs = (struct axi_regs *)dev->iobase; u32 timeout = 200; /* Wait till MDIO interface is ready to accept a new transaction. */ @@ -165,13 +164,13 @@ static inline int mdio_wait(struct eth_device *dev) return 0; } -static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum, - u16 *val) +static u32 phyread(struct axidma_priv *priv, u32 phyaddress, u32 registernum, + u16 *val) { - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct axi_regs *regs = priv->iobase; u32 mdioctrlreg = 0; - if (mdio_wait(dev)) + if (mdio_wait(regs)) return 1; mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) & @@ -183,7 +182,7 @@ static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum, out_be32(®s->mdio_mcr, mdioctrlreg); - if (mdio_wait(dev)) + if (mdio_wait(regs)) return 1; /* Read data */ @@ -191,13 +190,13 @@ static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum, return 0; } -static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum, - u32 data) +static u32 phywrite(struct axidma_priv *priv, u32 phyaddress, u32 registernum, + u32 data) { - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct axi_regs *regs = priv->iobase; u32 mdioctrlreg = 0; - if (mdio_wait(dev)) + if (mdio_wait(regs)) return 1; mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) & @@ -212,19 +211,18 @@ static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum, out_be32(®s->mdio_mcr, mdioctrlreg); - if (mdio_wait(dev)) + if (mdio_wait(regs)) return 1; return 0; } -/* Setting axi emac and phy to proper setting */ -static int setup_phy(struct eth_device *dev) +static int axiemac_phy_init(struct udevice *dev) { u16 phyreg; - u32 i, speed, emmc_reg, ret; - struct axidma_priv *priv = dev->priv; - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + u32 i, ret; + struct axidma_priv *priv = dev_get_priv(dev); + struct axi_regs *regs = priv->iobase; struct phy_device *phydev; u32 supported = SUPPORTED_10baseT_Half | @@ -234,16 +232,19 @@ static int setup_phy(struct eth_device *dev) SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; + /* Set default MDIO divisor */ + out_be32(®s->mdio_mc, XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK); + if (priv->phyaddr == -1) { /* Detect the PHY address */ for (i = 31; i >= 0; i--) { - ret = phyread(dev, i, PHY_DETECT_REG, &phyreg); + ret = phyread(priv, i, PHY_DETECT_REG, &phyreg); if (!ret && (phyreg != 0xFFFF) && ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { /* Found a valid PHY address */ priv->phyaddr = i; debug("axiemac: Found valid phy address, %x\n", - phyreg); + i); break; } } @@ -256,6 +257,18 @@ static int setup_phy(struct eth_device *dev) phydev->advertising = phydev->supported; priv->phydev = phydev; phy_config(phydev); + + return 0; +} + +/* Setting axi emac and phy to proper setting */ +static int setup_phy(struct udevice *dev) +{ + u32 speed, emmc_reg; + struct axidma_priv *priv = dev_get_priv(dev); + struct axi_regs *regs = priv->iobase; + struct phy_device *phydev = priv->phydev; + if (phy_startup(phydev)) { printf("axiemac: could not initialize PHY %s\n", phydev->dev->name); @@ -299,9 +312,9 @@ static int setup_phy(struct eth_device *dev) } /* STOP DMA transfers */ -static void axiemac_halt(struct eth_device *dev) +static void axiemac_stop(struct udevice *dev) { - struct axidma_priv *priv = dev->priv; + struct axidma_priv *priv = dev_get_priv(dev); u32 temp; /* Stop the hardware */ @@ -316,9 +329,9 @@ static void axiemac_halt(struct eth_device *dev) debug("axiemac: Halted\n"); } -static int axi_ethernet_init(struct eth_device *dev) +static int axi_ethernet_init(struct axidma_priv *priv) { - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct axi_regs *regs = priv->iobase; u32 timeout = 200; /* @@ -359,25 +372,26 @@ static int axi_ethernet_init(struct eth_device *dev) return 0; } -static int axiemac_setup_mac(struct eth_device *dev) +static int axiemac_write_hwaddr(struct udevice *dev) { - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct eth_pdata *pdata = dev_get_platdata(dev); + struct axidma_priv *priv = dev_get_priv(dev); + struct axi_regs *regs = priv->iobase; /* Set the MAC address */ - int val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) | - (dev->enetaddr[1] << 8) | (dev->enetaddr[0])); + int val = ((pdata->enetaddr[3] << 24) | (pdata->enetaddr[2] << 16) | + (pdata->enetaddr[1] << 8) | (pdata->enetaddr[0])); out_be32(®s->uaw0, val); - val = (dev->enetaddr[5] << 8) | dev->enetaddr[4] ; + val = (pdata->enetaddr[5] << 8) | pdata->enetaddr[4]; val |= in_be32(®s->uaw1) & ~XAE_UAW1_UNICASTADDR_MASK; out_be32(®s->uaw1, val); return 0; } /* Reset DMA engine */ -static void axi_dma_init(struct eth_device *dev) +static void axi_dma_init(struct axidma_priv *priv) { - struct axidma_priv *priv = dev->priv; u32 timeout = 500; /* Reset the engine so the hardware starts from a known state */ @@ -388,9 +402,9 @@ static void axi_dma_init(struct eth_device *dev) while (timeout--) { /* Check transmit/receive channel */ /* Reset is done when the reset bit is low */ - if (!(in_be32(&priv->dmatx->control) | + if (!((in_be32(&priv->dmatx->control) | in_be32(&priv->dmarx->control)) - & XAXIDMA_CR_RESET_MASK) { + & XAXIDMA_CR_RESET_MASK)) { break; } } @@ -398,10 +412,10 @@ static void axi_dma_init(struct eth_device *dev) printf("%s: Timeout\n", __func__); } -static int axiemac_init(struct eth_device *dev, bd_t * bis) +static int axiemac_start(struct udevice *dev) { - struct axidma_priv *priv = dev->priv; - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct axidma_priv *priv = dev_get_priv(dev); + struct axi_regs *regs = priv->iobase; u32 temp; debug("axiemac: Init started\n"); @@ -411,10 +425,10 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis) * reset, and since AXIDMA reset line is connected to AxiEthernet, this * would ensure a reset of AxiEthernet. */ - axi_dma_init(dev); + axi_dma_init(priv); /* Initialize AxiEthernet hardware. */ - if (axi_ethernet_init(dev)) + if (axi_ethernet_init(priv)) return -1; /* Disable all RX interrupts before RxBD space setup */ @@ -452,7 +466,7 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis) /* PHY setup */ if (!setup_phy(dev)) { - axiemac_halt(dev); + axiemac_stop(dev); return -1; } @@ -460,9 +474,9 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis) return 0; } -static int axiemac_send(struct eth_device *dev, void *ptr, int len) +static int axiemac_send(struct udevice *dev, void *ptr, int len) { - struct axidma_priv *priv = dev->priv; + struct axidma_priv *priv = dev_get_priv(dev); u32 timeout; if (len > PKTSIZE_ALIGN) @@ -498,8 +512,8 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len) /* Wait for transmission to complete */ debug("axiemac: Waiting for tx to be done\n"); timeout = 200; - while (timeout && (!in_be32(&priv->dmatx->status) & - (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK))) { + while (timeout && (!(in_be32(&priv->dmatx->status) & + (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK)))) { timeout--; udelay(1); } @@ -512,10 +526,9 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len) return 0; } -static int isrxready(struct eth_device *dev) +static int isrxready(struct axidma_priv *priv) { u32 status; - struct axidma_priv *priv = dev->priv; /* Read pending interrupts */ status = in_be32(&priv->dmarx->status); @@ -533,15 +546,15 @@ static int isrxready(struct eth_device *dev) return 0; } -static int axiemac_recv(struct eth_device *dev) +static int axiemac_recv(struct udevice *dev, int flags, uchar **packetp) { u32 length; - struct axidma_priv *priv = dev->priv; + struct axidma_priv *priv = dev_get_priv(dev); u32 temp; /* Wait for an incoming packet */ - if (!isrxready(dev)) - return 0; + if (!isrxready(priv)) + return -1; debug("axiemac: RX data ready\n"); @@ -554,9 +567,14 @@ static int axiemac_recv(struct eth_device *dev) #ifdef DEBUG print_buffer(&rxframe, &rxframe[0], 1, length, 16); #endif - /* Pass the received frame up for processing */ - if (length) - net_process_received_packet(rxframe, length); + + *packetp = rxframe; + return length; +} + +static int axiemac_free_pkt(struct udevice *dev, uchar *packet, int length) +{ + struct axidma_priv *priv = dev_get_priv(dev); #ifdef DEBUG /* It is useful to clear buffer to be sure that it is consistent */ @@ -581,76 +599,128 @@ static int axiemac_recv(struct eth_device *dev) debug("axiemac: RX completed, framelength = %d\n", length); - return length; + return 0; } -static int axiemac_miiphy_read(const char *devname, uchar addr, - uchar reg, ushort *val) +static int axiemac_miiphy_read(struct mii_dev *bus, int addr, + int devad, int reg) { - struct eth_device *dev = eth_get_dev(); - u32 ret; + int ret; + u16 value; - ret = phyread(dev, addr, reg, val); - debug("axiemac: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val); - return ret; + ret = phyread(bus->priv, addr, reg, &value); + debug("axiemac: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg, + value, ret); + return value; } -static int axiemac_miiphy_write(const char *devname, uchar addr, - uchar reg, ushort val) +static int axiemac_miiphy_write(struct mii_dev *bus, int addr, int devad, + int reg, u16 value) { - struct eth_device *dev = eth_get_dev(); - - debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, val); - return phywrite(dev, addr, reg, val); + debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value); + return phywrite(bus->priv, addr, reg, value); } -static int axiemac_bus_reset(struct mii_dev *bus) +static int axi_emac_probe(struct udevice *dev) { - debug("axiemac: Bus reset\n"); + struct axidma_priv *priv = dev_get_priv(dev); + int ret; + + priv->bus = mdio_alloc(); + priv->bus->read = axiemac_miiphy_read; + priv->bus->write = axiemac_miiphy_write; + priv->bus->priv = priv; + strcpy(priv->bus->name, "axi_emac"); + + ret = mdio_register(priv->bus); + if (ret) + return ret; + + axiemac_phy_init(dev); + return 0; } -int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, - unsigned long dma_addr) +static int axi_emac_remove(struct udevice *dev) { - struct eth_device *dev; - struct axidma_priv *priv; + struct axidma_priv *priv = dev_get_priv(dev); - dev = calloc(1, sizeof(struct eth_device)); - if (dev == NULL) - return -1; + free(priv->phydev); + mdio_unregister(priv->bus); + mdio_free(priv->bus); - dev->priv = calloc(1, sizeof(struct axidma_priv)); - if (dev->priv == NULL) { - free(dev); - return -1; - } - priv = dev->priv; + return 0; +} - sprintf(dev->name, "aximac.%lx", base_addr); +static const struct eth_ops axi_emac_ops = { + .start = axiemac_start, + .send = axiemac_send, + .recv = axiemac_recv, + .free_pkt = axiemac_free_pkt, + .stop = axiemac_stop, + .write_hwaddr = axiemac_write_hwaddr, +}; - dev->iobase = base_addr; - priv->dmatx = (struct axidma_reg *)dma_addr; +static int axi_emac_ofdata_to_platdata(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + struct axidma_priv *priv = dev_get_priv(dev); + int offset = 0; + const char *phy_mode; + + pdata->iobase = (phys_addr_t)dev_get_addr(dev); + priv->iobase = (struct axi_regs *)pdata->iobase; + + offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, + "axistream-connected"); + if (offset <= 0) { + printf("%s: axistream is not found\n", __func__); + return -EINVAL; + } + priv->dmatx = (struct axidma_reg *)fdtdec_get_int(gd->fdt_blob, + offset, "reg", 0); + if (!priv->dmatx) { + printf("%s: axi_dma register space not found\n", __func__); + return -EINVAL; + } /* RX channel offset is 0x30 */ - priv->dmarx = (struct axidma_reg *)(dma_addr + 0x30); - dev->init = axiemac_init; - dev->halt = axiemac_halt; - dev->send = axiemac_send; - dev->recv = axiemac_recv; - dev->write_hwaddr = axiemac_setup_mac; - -#ifdef CONFIG_PHY_ADDR - priv->phyaddr = CONFIG_PHY_ADDR; -#else + priv->dmarx = (struct axidma_reg *)((u32)priv->dmatx + 0x30); + priv->phyaddr = -1; -#endif - eth_register(dev); + offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, + "phy-handle"); + if (offset > 0) + priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1); + + phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL); + if (phy_mode) + pdata->phy_interface = phy_get_interface_by_name(phy_mode); + if (pdata->phy_interface == -1) { + debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); + return -EINVAL; + } + priv->interface = pdata->phy_interface; + + printf("AXI EMAC: %lx, phyaddr %d, interface %s\n", (ulong)priv->iobase, + priv->phyaddr, phy_string_for_interface(priv->interface)); -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) - miiphy_register(dev->name, axiemac_miiphy_read, axiemac_miiphy_write); - priv->bus = miiphy_get_dev_by_name(dev->name); - priv->bus->reset = axiemac_bus_reset; -#endif - return 1; + return 0; } + +static const struct udevice_id axi_emac_ids[] = { + { .compatible = "xlnx,axi-ethernet-1.00.a" }, + { } +}; + +U_BOOT_DRIVER(axi_emac) = { + .name = "axi_emac", + .id = UCLASS_ETH, + .of_match = axi_emac_ids, + .ofdata_to_platdata = axi_emac_ofdata_to_platdata, + .probe = axi_emac_probe, + .remove = axi_emac_remove, + .ops = &axi_emac_ops, + .priv_auto_alloc_size = sizeof(struct axidma_priv), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index 564205df83..5862bf0a7e 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -10,27 +10,25 @@ #include <common.h> #include <net.h> #include <config.h> +#include <dm.h> +#include <console.h> #include <malloc.h> #include <asm/io.h> +#include <phy.h> +#include <miiphy.h> #include <fdtdec.h> +#include <asm-generic/errno.h> +#include <linux/kernel.h> -#undef DEBUG +DECLARE_GLOBAL_DATA_PTR; #define ENET_ADDR_LENGTH 6 - -/* EmacLite constants */ -#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */ -#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ -#define XEL_TSR_OFFSET 0x07FC /* Tx status */ -#define XEL_RSR_OFFSET 0x17FC /* Rx status */ -#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ /* Xmit complete */ #define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL /* Xmit interrupt enable bit */ #define XEL_TSR_XMIT_IE_MASK 0x00000008UL -/* Buffer is active, SW bit only */ -#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL /* Program the MAC address */ #define XEL_TSR_PROGRAM_MASK 0x00000002UL /* define for programming the MAC address into the EMAC Lite */ @@ -46,14 +44,56 @@ /* Recv interrupt enable bit */ #define XEL_RSR_RECV_IE_MASK 0x00000008UL +/* MDIO Address Register Bit Masks */ +#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */ +#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */ +#define XEL_MDIOADDR_PHYADR_SHIFT 5 +#define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */ + +/* MDIO Write Data Register Bit Masks */ +#define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */ + +/* MDIO Read Data Register Bit Masks */ +#define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */ + +/* MDIO Control Register Bit Masks */ +#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */ +#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */ + +struct emaclite_regs { + u32 tx_ping; /* 0x0 - TX Ping buffer */ + u32 reserved1[504]; + u32 mdioaddr; /* 0x7e4 - MDIO Address Register */ + u32 mdiowr; /* 0x7e8 - MDIO Write Data Register */ + u32 mdiord;/* 0x7ec - MDIO Read Data Register */ + u32 mdioctrl; /* 0x7f0 - MDIO Control Register */ + u32 tx_ping_tplr; /* 0x7f4 - Tx packet length */ + u32 global_interrupt; /* 0x7f8 - Global interrupt enable */ + u32 tx_ping_tsr; /* 0x7fc - Tx status */ + u32 tx_pong; /* 0x800 - TX Pong buffer */ + u32 reserved2[508]; + u32 tx_pong_tplr; /* 0xff4 - Tx packet length */ + u32 reserved3; /* 0xff8 */ + u32 tx_pong_tsr; /* 0xffc - Tx status */ + u32 rx_ping; /* 0x1000 - Receive Buffer */ + u32 reserved4[510]; + u32 rx_ping_rsr; /* 0x17fc - Rx status */ + u32 rx_pong; /* 0x1800 - Receive Buffer */ + u32 reserved5[510]; + u32 rx_pong_rsr; /* 0x1ffc - Rx status */ +}; + struct xemaclite { - u32 nexttxbuffertouse; /* Next TX buffer to write to */ - u32 nextrxbuffertouse; /* Next RX buffer to read from */ + bool use_rx_pong_buffer_next; /* Next RX buffer to read from */ u32 txpp; /* TX ping pong buffer */ u32 rxpp; /* RX ping pong buffer */ + int phyaddr; + struct emaclite_regs *regs; + struct phy_device *phydev; + struct mii_dev *bus; }; -static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */ +static uchar etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */ static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount) { @@ -81,7 +121,7 @@ static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount) *to8ptr++ = *from8ptr++; } -static void xemaclite_alignedwrite(void *srcptr, u32 destptr, u32 bytecount) +static void xemaclite_alignedwrite(void *srcptr, u32 *destptr, u32 bytecount) { u32 i; u32 alignbuffer; @@ -107,42 +147,206 @@ static void xemaclite_alignedwrite(void *srcptr, u32 destptr, u32 bytecount) *to32ptr++ = alignbuffer; } -static void emaclite_halt(struct eth_device *dev) +static int wait_for_bit(const char *func, u32 *reg, const u32 mask, + bool set, unsigned int timeout) +{ + u32 val; + unsigned long start = get_timer(0); + + while (1) { + val = readl(reg); + + if (!set) + val = ~val; + + if ((val & mask) == mask) + return 0; + + if (get_timer(start) > timeout) + break; + + if (ctrlc()) { + puts("Abort\n"); + return -EINTR; + } + + udelay(1); + } + + debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n", + func, reg, mask, set); + + return -ETIMEDOUT; +} + +static int mdio_wait(struct emaclite_regs *regs) { - debug("eth_halt\n"); + return wait_for_bit(__func__, ®s->mdioctrl, + XEL_MDIOCTRL_MDIOSTS_MASK, false, 2000); } -static int emaclite_init(struct eth_device *dev, bd_t *bis) +static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum, + u16 *data) { - struct xemaclite *emaclite = dev->priv; + struct emaclite_regs *regs = emaclite->regs; + + if (mdio_wait(regs)) + return 1; + + u32 ctrl_reg = in_be32(®s->mdioctrl); + out_be32(®s->mdioaddr, XEL_MDIOADDR_OP_MASK | + ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum)); + out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + + if (mdio_wait(regs)) + return 1; + + /* Read data */ + *data = in_be32(®s->mdiord); + return 0; +} + +static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum, + u16 data) +{ + struct emaclite_regs *regs = emaclite->regs; + + if (mdio_wait(regs)) + return 1; + + /* + * Write the PHY address, register number and clear the OP bit in the + * MDIO Address register and then write the value into the MDIO Write + * Data register. Finally, set the Status bit in the MDIO Control + * register to start a MDIO write transaction. + */ + u32 ctrl_reg = in_be32(®s->mdioctrl); + out_be32(®s->mdioaddr, ~XEL_MDIOADDR_OP_MASK & + ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum)); + out_be32(®s->mdiowr, data); + out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + + if (mdio_wait(regs)) + return 1; + + return 0; +} + +static void emaclite_stop(struct udevice *dev) +{ + debug("eth_stop\n"); +} + +/* Use MII register 1 (MII status register) to detect PHY */ +#define PHY_DETECT_REG 1 + +/* Mask used to verify certain PHY features (or register contents) + * in the register above: + * 0x1000: 10Mbps full duplex support + * 0x0800: 10Mbps half duplex support + * 0x0008: Auto-negotiation support + */ +#define PHY_DETECT_MASK 0x1808 + +static int setup_phy(struct udevice *dev) +{ + int i; + u16 phyreg; + struct xemaclite *emaclite = dev_get_priv(dev); + struct phy_device *phydev; + + u32 supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full; + + if (emaclite->phyaddr != -1) { + phyread(emaclite, emaclite->phyaddr, PHY_DETECT_REG, &phyreg); + if ((phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + debug("Default phy address %d is valid\n", + emaclite->phyaddr); + } else { + debug("PHY address is not setup correctly %d\n", + emaclite->phyaddr); + emaclite->phyaddr = -1; + } + } + + if (emaclite->phyaddr == -1) { + /* detect the PHY address */ + for (i = 31; i >= 0; i--) { + phyread(emaclite, i, PHY_DETECT_REG, &phyreg); + if ((phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + emaclite->phyaddr = i; + debug("emaclite: Found valid phy address, %d\n", + i); + break; + } + } + } + + /* interface - look at tsec */ + phydev = phy_connect(emaclite->bus, emaclite->phyaddr, dev, + PHY_INTERFACE_MODE_MII); + /* + * Phy can support 1000baseT but device NOT that's why phydev->supported + * must be setup for 1000baseT. phydev->advertising setups what speeds + * will be used for autonegotiation where 1000baseT must be disabled. + */ + phydev->supported = supported | SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full; + phydev->advertising = supported; + emaclite->phydev = phydev; + phy_config(phydev); + phy_startup(phydev); + + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return 0; + } + + /* Do not setup anything */ + return 1; +} + +static int emaclite_start(struct udevice *dev) +{ + struct xemaclite *emaclite = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + struct emaclite_regs *regs = emaclite->regs; + debug("EmacLite Initialization Started\n"); /* * TX - TX_PING & TX_PONG initialization */ /* Restart PING TX */ - out_be32 (dev->iobase + XEL_TSR_OFFSET, 0); + out_be32(®s->tx_ping_tsr, 0); /* Copy MAC address */ - xemaclite_alignedwrite(dev->enetaddr, dev->iobase, ENET_ADDR_LENGTH); + xemaclite_alignedwrite(pdata->enetaddr, ®s->tx_ping, + ENET_ADDR_LENGTH); /* Set the length */ - out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH); + out_be32(®s->tx_ping_tplr, ENET_ADDR_LENGTH); /* Update the MAC address in the EMAC Lite */ - out_be32 (dev->iobase + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR); + out_be32(®s->tx_ping_tsr, XEL_TSR_PROG_MAC_ADDR); /* Wait for EMAC Lite to finish with the MAC address update */ - while ((in_be32 (dev->iobase + XEL_TSR_OFFSET) & + while ((in_be32 (®s->tx_ping_tsr) & XEL_TSR_PROG_MAC_ADDR) != 0) ; if (emaclite->txpp) { /* The same operation with PONG TX */ - out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0); - xemaclite_alignedwrite(dev->enetaddr, dev->iobase + - XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH); - out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH); - out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, - XEL_TSR_PROG_MAC_ADDR); - while ((in_be32 (dev->iobase + XEL_TSR_OFFSET + - XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) + out_be32(®s->tx_pong_tsr, 0); + xemaclite_alignedwrite(pdata->enetaddr, ®s->tx_pong, + ENET_ADDR_LENGTH); + out_be32(®s->tx_pong_tplr, ENET_ADDR_LENGTH); + out_be32(®s->tx_pong_tsr, XEL_TSR_PROG_MAC_ADDR); + while ((in_be32(®s->tx_pong_tsr) & + XEL_TSR_PROG_MAC_ADDR) != 0) ; } @@ -150,52 +354,48 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis) * RX - RX_PING & RX_PONG initialization */ /* Write out the value to flush the RX buffer */ - out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK); + out_be32(®s->rx_ping_rsr, XEL_RSR_RECV_IE_MASK); if (emaclite->rxpp) - out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET, - XEL_RSR_RECV_IE_MASK); + out_be32(®s->rx_pong_rsr, XEL_RSR_RECV_IE_MASK); + + out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK); + if (in_be32(®s->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK) + if (!setup_phy(dev)) + return -1; debug("EmacLite Initialization complete\n"); return 0; } -static int xemaclite_txbufferavailable(struct eth_device *dev) +static int xemaclite_txbufferavailable(struct xemaclite *emaclite) { - u32 reg; - u32 txpingbusy; - u32 txpongbusy; - struct xemaclite *emaclite = dev->priv; + u32 tmp; + struct emaclite_regs *regs = emaclite->regs; /* * Read the other buffer register * and determine if the other buffer is available */ - reg = in_be32 (dev->iobase + - emaclite->nexttxbuffertouse + 0); - txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) == - XEL_TSR_XMIT_BUSY_MASK); - - reg = in_be32 (dev->iobase + - (emaclite->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0); - txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) == - XEL_TSR_XMIT_BUSY_MASK); + tmp = ~in_be32(®s->tx_ping_tsr); + if (emaclite->txpp) + tmp |= ~in_be32(®s->tx_pong_tsr); - return !(txpingbusy && txpongbusy); + return !(tmp & XEL_TSR_XMIT_BUSY_MASK); } -static int emaclite_send(struct eth_device *dev, void *ptr, int len) +static int emaclite_send(struct udevice *dev, void *ptr, int len) { u32 reg; - u32 baseaddress; - struct xemaclite *emaclite = dev->priv; + struct xemaclite *emaclite = dev_get_priv(dev); + struct emaclite_regs *regs = emaclite->regs; u32 maxtry = 1000; if (len > PKTSIZE) len = PKTSIZE; - while (!xemaclite_txbufferavailable(dev) && maxtry) { + while (xemaclite_txbufferavailable(emaclite) && maxtry) { udelay(10); maxtry--; } @@ -203,58 +403,40 @@ static int emaclite_send(struct eth_device *dev, void *ptr, int len) if (!maxtry) { printf("Error: Timeout waiting for ethernet TX buffer\n"); /* Restart PING TX */ - out_be32 (dev->iobase + XEL_TSR_OFFSET, 0); + out_be32(®s->tx_ping_tsr, 0); if (emaclite->txpp) { - out_be32 (dev->iobase + XEL_TSR_OFFSET + - XEL_BUFFER_OFFSET, 0); + out_be32(®s->tx_pong_tsr, 0); } return -1; } - /* Determine the expected TX buffer address */ - baseaddress = (dev->iobase + emaclite->nexttxbuffertouse); - /* Determine if the expected buffer address is empty */ - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); - if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) - && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET) - & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) { - - if (emaclite->txpp) - emaclite->nexttxbuffertouse ^= XEL_BUFFER_OFFSET; - - debug("Send packet from 0x%x\n", baseaddress); + reg = in_be32(®s->tx_ping_tsr); + if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) { + debug("Send packet from tx_ping buffer\n"); /* Write the frame to the buffer */ - xemaclite_alignedwrite(ptr, baseaddress, len); - out_be32 (baseaddress + XEL_TPLR_OFFSET,(len & - (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO))); - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); + xemaclite_alignedwrite(ptr, ®s->tx_ping, len); + out_be32(®s->tx_ping_tplr, len & + (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)); + reg = in_be32(®s->tx_ping_tsr); reg |= XEL_TSR_XMIT_BUSY_MASK; - if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) - reg |= XEL_TSR_XMIT_ACTIVE_MASK; - out_be32 (baseaddress + XEL_TSR_OFFSET, reg); + out_be32(®s->tx_ping_tsr, reg); return 0; } if (emaclite->txpp) { - /* Switch to second buffer */ - baseaddress ^= XEL_BUFFER_OFFSET; /* Determine if the expected buffer address is empty */ - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); - if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) - && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET) - & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) { - debug("Send packet from 0x%x\n", baseaddress); + reg = in_be32(®s->tx_pong_tsr); + if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) { + debug("Send packet from tx_pong buffer\n"); /* Write the frame to the buffer */ - xemaclite_alignedwrite(ptr, baseaddress, len); - out_be32 (baseaddress + XEL_TPLR_OFFSET, (len & - (XEL_TPLR_LENGTH_MASK_HI | - XEL_TPLR_LENGTH_MASK_LO))); - reg = in_be32 (baseaddress + XEL_TSR_OFFSET); + xemaclite_alignedwrite(ptr, ®s->tx_pong, len); + out_be32(®s->tx_pong_tplr, len & + (XEL_TPLR_LENGTH_MASK_HI | + XEL_TPLR_LENGTH_MASK_LO)); + reg = in_be32(®s->tx_pong_tsr); reg |= XEL_TSR_XMIT_BUSY_MASK; - if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) - reg |= XEL_TSR_XMIT_ACTIVE_MASK; - out_be32 (baseaddress + XEL_TSR_OFFSET, reg); + out_be32(®s->tx_pong_tsr, reg); return 0; } } @@ -263,130 +445,188 @@ static int emaclite_send(struct eth_device *dev, void *ptr, int len) return -1; } -static int emaclite_recv(struct eth_device *dev) +static int emaclite_recv(struct udevice *dev, int flags, uchar **packetp) { - u32 length; - u32 reg; - u32 baseaddress; + u32 length, first_read, reg, attempt = 0; + void *addr, *ack; struct xemaclite *emaclite = dev->priv; + struct emaclite_regs *regs = emaclite->regs; + struct ethernet_hdr *eth; + struct ip_udp_hdr *ip; + +try_again: + if (!emaclite->use_rx_pong_buffer_next) { + reg = in_be32(®s->rx_ping_rsr); + debug("Testing data at rx_ping\n"); + if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { + debug("Data found in rx_ping buffer\n"); + addr = ®s->rx_ping; + ack = ®s->rx_ping_rsr; + } else { + debug("Data not found in rx_ping buffer\n"); + /* Pong buffer is not available - return immediately */ + if (!emaclite->rxpp) + return -1; - baseaddress = dev->iobase + emaclite->nextrxbuffertouse; - reg = in_be32 (baseaddress + XEL_RSR_OFFSET); - debug("Testing data at address 0x%x\n", baseaddress); - if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { - if (emaclite->rxpp) - emaclite->nextrxbuffertouse ^= XEL_BUFFER_OFFSET; + /* Try pong buffer if this is first attempt */ + if (attempt++) + return -1; + emaclite->use_rx_pong_buffer_next = + !emaclite->use_rx_pong_buffer_next; + goto try_again; + } } else { - - if (!emaclite->rxpp) { - debug("No data was available - address 0x%x\n", - baseaddress); - return 0; + reg = in_be32(®s->rx_pong_rsr); + debug("Testing data at rx_pong\n"); + if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { + debug("Data found in rx_pong buffer\n"); + addr = ®s->rx_pong; + ack = ®s->rx_pong_rsr; } else { - baseaddress ^= XEL_BUFFER_OFFSET; - reg = in_be32 (baseaddress + XEL_RSR_OFFSET); - if ((reg & XEL_RSR_RECV_DONE_MASK) != - XEL_RSR_RECV_DONE_MASK) { - debug("No data was available - address 0x%x\n", - baseaddress); - return 0; - } + debug("Data not found in rx_pong buffer\n"); + /* Try ping buffer if this is first attempt */ + if (attempt++) + return -1; + emaclite->use_rx_pong_buffer_next = + !emaclite->use_rx_pong_buffer_next; + goto try_again; } } - /* Get the length of the frame that arrived */ - switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) & - 0xFFFF0000 ) >> 16) { - case 0x806: - length = 42 + 20; /* FIXME size of ARP */ - debug("ARP Packet\n"); - break; - case 0x800: - length = 14 + 14 + - (((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + - 0x10))) & 0xFFFF0000) >> 16); - /* FIXME size of IP packet */ - debug ("IP Packet\n"); - break; - default: - debug("Other Packet\n"); - length = PKTSIZE; - break; + + /* Read all bytes for ARP packet with 32bit alignment - 48bytes */ + first_read = ALIGN(ETHER_HDR_SIZE + ARP_HDR_SIZE + ETH_FCS_LEN, 4); + xemaclite_alignedread(addr, etherrxbuff, first_read); + + /* Detect real packet size */ + eth = (struct ethernet_hdr *)etherrxbuff; + switch (ntohs(eth->et_protlen)) { + case PROT_ARP: + length = first_read; + debug("ARP Packet %x\n", length); + break; + case PROT_IP: + ip = (struct ip_udp_hdr *)(etherrxbuff + ETHER_HDR_SIZE); + length = ntohs(ip->ip_len); + length += ETHER_HDR_SIZE + ETH_FCS_LEN; + debug("IP Packet %x\n", length); + break; + default: + debug("Other Packet\n"); + length = PKTSIZE; + break; } - xemaclite_alignedread((u32 *) (baseaddress + XEL_RXBUFF_OFFSET), - etherrxbuff, length); + /* Read the rest of the packet which is longer then first read */ + if (length != first_read) + xemaclite_alignedread(addr + first_read, + etherrxbuff + first_read, + length - first_read); /* Acknowledge the frame */ - reg = in_be32 (baseaddress + XEL_RSR_OFFSET); + reg = in_be32(ack); reg &= ~XEL_RSR_RECV_DONE_MASK; - out_be32 (baseaddress + XEL_RSR_OFFSET, reg); + out_be32(ack, reg); - debug("Packet receive from 0x%x, length %dB\n", baseaddress, length); - net_process_received_packet((uchar *)etherrxbuff, length); + debug("Packet receive from 0x%p, length %dB\n", addr, length); + *packetp = etherrxbuff; return length; - } -int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, - int txpp, int rxpp) +static int emaclite_miiphy_read(struct mii_dev *bus, int addr, + int devad, int reg) { - struct eth_device *dev; - struct xemaclite *emaclite; + u32 ret; + u16 val = 0; - dev = calloc(1, sizeof(*dev)); - if (dev == NULL) - return -1; + ret = phyread(bus->priv, addr, reg, &val); + debug("emaclite: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg, val, ret); + return val; +} - emaclite = calloc(1, sizeof(struct xemaclite)); - if (emaclite == NULL) { - free(dev); - return -1; - } +static int emaclite_miiphy_write(struct mii_dev *bus, int addr, int devad, + int reg, u16 value) +{ + debug("emaclite: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value); + return phywrite(bus->priv, addr, reg, value); +} + +static int emaclite_probe(struct udevice *dev) +{ + struct xemaclite *emaclite = dev_get_priv(dev); + int ret; - dev->priv = emaclite; + emaclite->bus = mdio_alloc(); + emaclite->bus->read = emaclite_miiphy_read; + emaclite->bus->write = emaclite_miiphy_write; + emaclite->bus->priv = emaclite; + strcpy(emaclite->bus->name, "emaclite"); - emaclite->txpp = txpp; - emaclite->rxpp = rxpp; + ret = mdio_register(emaclite->bus); + if (ret) + return ret; - sprintf(dev->name, "Xelite.%lx", base_addr); + return 0; +} - dev->iobase = base_addr; - dev->init = emaclite_init; - dev->halt = emaclite_halt; - dev->send = emaclite_send; - dev->recv = emaclite_recv; +static int emaclite_remove(struct udevice *dev) +{ + struct xemaclite *emaclite = dev_get_priv(dev); - eth_register(dev); + free(emaclite->phydev); + mdio_unregister(emaclite->bus); + mdio_free(emaclite->bus); - return 1; + return 0; } -#if CONFIG_IS_ENABLED(OF_CONTROL) -int xilinx_emaclite_of_init(const void *blob) +static const struct eth_ops emaclite_ops = { + .start = emaclite_start, + .send = emaclite_send, + .recv = emaclite_recv, + .stop = emaclite_stop, +}; + +static int emaclite_ofdata_to_platdata(struct udevice *dev) { + struct eth_pdata *pdata = dev_get_platdata(dev); + struct xemaclite *emaclite = dev_get_priv(dev); int offset = 0; - u32 ret = 0; - u32 reg; - do { - offset = fdt_node_offset_by_compatible(blob, offset, - "xlnx,xps-ethernetlite-1.00.a"); - if (offset != -1) { - reg = fdtdec_get_addr(blob, offset, "reg"); - if (reg != FDT_ADDR_T_NONE) { - u32 rxpp = fdtdec_get_int(blob, offset, - "xlnx,rx-ping-pong", 0); - u32 txpp = fdtdec_get_int(blob, offset, - "xlnx,tx-ping-pong", 0); - ret |= xilinx_emaclite_initialize(NULL, reg, - txpp, rxpp); - } else { - debug("EMACLITE: Can't get base address\n"); - return -1; - } - } - } while (offset != -1); + pdata->iobase = (phys_addr_t)dev_get_addr(dev); + emaclite->regs = (struct emaclite_regs *)pdata->iobase; + + emaclite->phyaddr = -1; + + offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, + "phy-handle"); + if (offset > 0) + emaclite->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, + "reg", -1); + + emaclite->txpp = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "xlnx,tx-ping-pong", 0); + emaclite->rxpp = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "xlnx,rx-ping-pong", 0); - return ret; + printf("EMACLITE: %lx, phyaddr %d, %d/%d\n", (ulong)emaclite->regs, + emaclite->phyaddr, emaclite->txpp, emaclite->rxpp); + + return 0; } -#endif + +static const struct udevice_id emaclite_ids[] = { + { .compatible = "xlnx,xps-ethernetlite-1.00.a" }, + { } +}; + +U_BOOT_DRIVER(emaclite) = { + .name = "emaclite", + .id = UCLASS_ETH, + .of_match = emaclite_ids, + .ofdata_to_platdata = emaclite_ofdata_to_platdata, + .probe = emaclite_probe, + .remove = emaclite_remove, + .ops = &emaclite_ops, + .priv_auto_alloc_size = sizeof(struct xemaclite), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c index 7cc86571e4..ca09546ab5 100644 --- a/drivers/net/xilinx_ll_temac.c +++ b/drivers/net/xilinx_ll_temac.c @@ -303,7 +303,8 @@ int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf) if (devinf->devname) { strncpy(dev->name, devinf->devname, sizeof(dev->name)); } else { - snprintf(dev->name, sizeof(dev->name), "lltemac.%lx", devinf->base_addr); + snprintf(dev->name, sizeof(dev->name), "ll_tem.%lx", + devinf->base_addr); devinf->devname = dev->name; } diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 97e30f3be0..b3821c31a9 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -57,7 +57,11 @@ DECLARE_GLOBAL_DATA_PTR; #define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */ #define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */ #define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */ +#ifdef CONFIG_ARM64 +#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000100000 /* Div pclk by 64, max 160MHz */ +#else #define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x0000c0000 /* Div pclk by 48, max 120MHz */ +#endif #ifdef CONFIG_ARM64 # define ZYNQ_GEM_DBUS_WIDTH (1 << 21) /* 64 bit bus */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 83068cfd50..1ab6128269 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -112,6 +112,13 @@ config DEBUG_UART_S5P will need to provide parameters to make this work. The driver will be available until the real driver-model serial is running. +config DEBUG_UART_UARTLITE + bool "Xilinx Uartlite" + help + Select this to enable a debug UART using the serial_uartlite driver. + You will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + config DEBUG_UART_ZYNQ bool "Xilinx Zynq" help @@ -271,4 +278,11 @@ config UNIPHIER_SERIAL If you have a UniPhier based board and want to use the on-chip serial ports, say Y to this option. If unsure, say N. +config XILINX_UARTLITE + bool "Xilinx Uarlite support" + depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || 4xx) + help + If you have a Xilinx based board and want to use the uartlite + serial ports, say Y to this option. If unsure, say N. + endmenu diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 988438e754..a2e9303925 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2008-2011 Michal Simek <monstr@monstr.eu> + * (C) Copyright 2008 - 2015 Michal Simek <monstr@monstr.eu> * Clean driver and add xilinx constant from header file * * (C) Copyright 2004 Atmark Techno, Inc. @@ -10,13 +10,17 @@ #include <config.h> #include <common.h> +#include <dm.h> #include <asm/io.h> #include <linux/compiler.h> #include <serial.h> -#define SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */ -#define SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */ -#define SR_RX_FIFO_FULL 0x02 /* receive FIFO full */ +DECLARE_GLOBAL_DATA_PTR; + +#define SR_TX_FIFO_FULL BIT(3) /* transmit FIFO full */ +#define SR_TX_FIFO_EMPTY BIT(2) /* transmit FIFO empty */ +#define SR_RX_FIFO_VALID_DATA BIT(0) /* data in receive FIFO */ +#define SR_RX_FIFO_FULL BIT(1) /* receive FIFO full */ #define ULITE_CONTROL_RST_TX 0x01 #define ULITE_CONTROL_RST_RX 0x02 @@ -28,135 +32,111 @@ struct uartlite { unsigned int control; }; -static struct uartlite *userial_ports[4] = { -#ifdef XILINX_UARTLITE_BASEADDR - [0] = (struct uartlite *)XILINX_UARTLITE_BASEADDR, -#endif -#ifdef XILINX_UARTLITE_BASEADDR1 - [1] = (struct uartlite *)XILINX_UARTLITE_BASEADDR1, -#endif -#ifdef XILINX_UARTLITE_BASEADDR2 - [2] = (struct uartlite *)XILINX_UARTLITE_BASEADDR2, -#endif -#ifdef XILINX_UARTLITE_BASEADDR3 - [3] = (struct uartlite *)XILINX_UARTLITE_BASEADDR3 -#endif +struct uartlite_platdata { + struct uartlite *regs; }; -static void uartlite_serial_putc(const char c, const int port) +static int uartlite_serial_putc(struct udevice *dev, const char ch) { - struct uartlite *regs = userial_ports[port]; + struct uartlite_platdata *plat = dev_get_platdata(dev); + struct uartlite *regs = plat->regs; - if (c == '\n') - uartlite_serial_putc('\r', port); + if (in_be32(®s->status) & SR_TX_FIFO_FULL) + return -EAGAIN; - while (in_be32(®s->status) & SR_TX_FIFO_FULL) - ; - out_be32(®s->tx_fifo, c & 0xff); -} + out_be32(®s->tx_fifo, ch & 0xff); -static void uartlite_serial_puts(const char *s, const int port) -{ - while (*s) - uartlite_serial_putc(*s++, port); + return 0; } -static int uartlite_serial_getc(const int port) +static int uartlite_serial_getc(struct udevice *dev) { - struct uartlite *regs = userial_ports[port]; + struct uartlite_platdata *plat = dev_get_platdata(dev); + struct uartlite *regs = plat->regs; + + if (!(in_be32(®s->status) & SR_RX_FIFO_VALID_DATA)) + return -EAGAIN; - while (!(in_be32(®s->status) & SR_RX_FIFO_VALID_DATA)) - ; return in_be32(®s->rx_fifo) & 0xff; } -static int uartlite_serial_tstc(const int port) +static int uartlite_serial_pending(struct udevice *dev, bool input) { - struct uartlite *regs = userial_ports[port]; + struct uartlite_platdata *plat = dev_get_platdata(dev); + struct uartlite *regs = plat->regs; + + if (input) + return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA; - return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA; + return !(in_be32(®s->status) & SR_TX_FIFO_EMPTY); } -static int uartlite_serial_init(const int port) +static int uartlite_serial_probe(struct udevice *dev) { - struct uartlite *regs = userial_ports[port]; + struct uartlite_platdata *plat = dev_get_platdata(dev); + struct uartlite *regs = plat->regs; - if (regs) { - out_be32(®s->control, 0); - out_be32(®s->control, - ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX); - in_be32(®s->control); - return 0; - } + out_be32(®s->control, 0); + out_be32(®s->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX); + in_be32(®s->control); - return -1; + return 0; } -/* Multi serial device functions */ -#define DECLARE_ESERIAL_FUNCTIONS(port) \ - static int userial##port##_init(void) \ - { return uartlite_serial_init(port); } \ - static void userial##port##_setbrg(void) {} \ - static int userial##port##_getc(void) \ - { return uartlite_serial_getc(port); } \ - static int userial##port##_tstc(void) \ - { return uartlite_serial_tstc(port); } \ - static void userial##port##_putc(const char c) \ - { uartlite_serial_putc(c, port); } \ - static void userial##port##_puts(const char *s) \ - { uartlite_serial_puts(s, port); } - -/* Serial device descriptor */ -#define INIT_ESERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = userial##port##_init, \ - .stop = NULL, \ - .setbrg = userial##port##_setbrg, \ - .getc = userial##port##_getc, \ - .tstc = userial##port##_tstc, \ - .putc = userial##port##_putc, \ - .puts = userial##port##_puts, \ +static int uartlite_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct uartlite_platdata *plat = dev_get_platdata(dev); + + plat->regs = (struct uartlite *)dev_get_addr(dev); + + return 0; } -DECLARE_ESERIAL_FUNCTIONS(0); -struct serial_device uartlite_serial0_device = - INIT_ESERIAL_STRUCTURE(0, "ttyUL0"); -DECLARE_ESERIAL_FUNCTIONS(1); -struct serial_device uartlite_serial1_device = - INIT_ESERIAL_STRUCTURE(1, "ttyUL1"); -DECLARE_ESERIAL_FUNCTIONS(2); -struct serial_device uartlite_serial2_device = - INIT_ESERIAL_STRUCTURE(2, "ttyUL2"); -DECLARE_ESERIAL_FUNCTIONS(3); -struct serial_device uartlite_serial3_device = - INIT_ESERIAL_STRUCTURE(3, "ttyUL3"); - -__weak struct serial_device *default_serial_console(void) +static const struct dm_serial_ops uartlite_serial_ops = { + .putc = uartlite_serial_putc, + .pending = uartlite_serial_pending, + .getc = uartlite_serial_getc, +}; + +static const struct udevice_id uartlite_serial_ids[] = { + { .compatible = "xlnx,opb-uartlite-1.00.b", }, + { .compatible = "xlnx,xps-uartlite-1.00.a" }, + { } +}; + +U_BOOT_DRIVER(serial_uartlite) = { + .name = "serial_uartlite", + .id = UCLASS_SERIAL, + .of_match = uartlite_serial_ids, + .ofdata_to_platdata = uartlite_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct uartlite_platdata), + .probe = uartlite_serial_probe, + .ops = &uartlite_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +#ifdef CONFIG_DEBUG_UART_UARTLITE + +#include <debug_uart.h> + +static inline void _debug_uart_init(void) { - if (userial_ports[0]) - return &uartlite_serial0_device; - if (userial_ports[1]) - return &uartlite_serial1_device; - if (userial_ports[2]) - return &uartlite_serial2_device; - if (userial_ports[3]) - return &uartlite_serial3_device; - - return NULL; + struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; + + out_be32(®s->control, 0); + out_be32(®s->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX); + in_be32(®s->control); } -void uartlite_serial_initialize(void) +static inline void _debug_uart_putc(int ch) { -#ifdef XILINX_UARTLITE_BASEADDR - serial_register(&uartlite_serial0_device); -#endif /* XILINX_UARTLITE_BASEADDR */ -#ifdef XILINX_UARTLITE_BASEADDR1 - serial_register(&uartlite_serial1_device); -#endif /* XILINX_UARTLITE_BASEADDR1 */ -#ifdef XILINX_UARTLITE_BASEADDR2 - serial_register(&uartlite_serial2_device); -#endif /* XILINX_UARTLITE_BASEADDR2 */ -#ifdef XILINX_UARTLITE_BASEADDR3 - serial_register(&uartlite_serial3_device); -#endif /* XILINX_UARTLITE_BASEADDR3 */ + struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; + + while (in_be32(®s->status) & SR_TX_FIFO_FULL) + ; + + out_be32(®s->tx_fifo, ch & 0xff); } + +DEBUG_UART_FUNCS +#endif diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 3430482f8d..e79d997cba 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -156,13 +156,8 @@ static int zynq_serial_pending(struct udevice *dev, bool input) static int zynq_serial_ofdata_to_platdata(struct udevice *dev) { struct zynq_uart_priv *priv = dev_get_priv(dev); - fdt_addr_t addr; - addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); - if (addr == FDT_ADDR_T_NONE) - return -EINVAL; - - priv->regs = (struct uart_zynq *)addr; + priv->regs = (struct uart_zynq *)dev_get_addr(dev); return 0; } @@ -177,6 +172,7 @@ static const struct dm_serial_ops zynq_serial_ops = { static const struct udevice_id zynq_serial_ids[] = { { .compatible = "xlnx,xuartps" }, { .compatible = "cdns,uart-r1p8" }, + { .compatible = "cdns,uart-r1p12" }, { } }; diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h deleted file mode 100644 index fa32a2e8cf..0000000000 --- a/include/configs/fx12mm.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com - * - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, - * see http://www.em.avnet.com - */ - -#ifndef __CONFIG_FX12_H -#define __CONFIG_FX12_H - -#include "../board/avnet/fx12mm/xparameters.h" - -/* cmd config */ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD - -/* sdram */ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/* environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_SYS_ENV_OFFSET 0xA0000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) -#define CONFIG_ENV_OVERWRITE 1 - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and running;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (4*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 -#define MTDIDS_DEFAULT "nor0=fx12mm-flash" -#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" - -#include "configs/xilinx-ppc405.h" - -#endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index f93861d770..97a0d86b91 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -32,54 +32,20 @@ #endif /* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -# define CONFIG_XILINX_UARTLITE -# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -# define CONSOLE_ARG "console=console=ttyUL0,115200\0" -#elif XILINX_UART16550_BASEADDR -# define CONFIG_SYS_NS16550_SERIAL -# if defined(__MICROBLAZEEL__) -# define CONFIG_SYS_NS16550_REG_SIZE -4 -# else -# define CONFIG_SYS_NS16550_REG_SIZE 4 -# endif -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_COM1 \ - ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ # define CONFIG_BAUDRATE 115200 - /* The following table includes the supported baudrates */ # define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -# define CONSOLE_ARG "console=console=ttyS0,115200\0" -#else -# error Undefined uart -#endif /* setting reset address */ /*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ -/* ethernet */ -#undef CONFIG_SYS_ENET -#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL) -# define CONFIG_XILINX_EMACLITE 1 -# define CONFIG_SYS_ENET -#endif -#if defined(XILINX_AXIEMAC_BASEADDR) -# define CONFIG_XILINX_AXIEMAC 1 -# define CONFIG_SYS_ENET -#endif - -#undef ET_DEBUG - /* gpio */ #ifdef XILINX_GPIO_BASEADDR # define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif +#define CONFIG_BOARD_LATE_INIT /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR @@ -103,13 +69,6 @@ # endif #endif -#if !defined(CONFIG_OF_CONTROL) || \ - (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL)) -/* ddr sdram - main memory */ -# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#endif - #define CONFIG_SYS_MALLOC_LEN 0xC0000 /* Stack location before relocation */ @@ -198,16 +157,6 @@ #endif /* !SPIFLASH */ #endif /* !FLASH */ -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR -# define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -# define SYSTEMACE_CONFIG_FPGA -# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -# define CONFIG_DOS_PARTITION -#endif - #if defined(XILINX_USE_ICACHE) # define CONFIG_ICACHE #else @@ -245,17 +194,6 @@ # undef CONFIG_CMD_CACHE #endif -#ifdef CONFIG_SYS_ENET -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_TFTPPUT -#endif - -#if defined(CONFIG_SYSTEMACE) -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -#endif - #if defined(FLASH) # define CONFIG_CMD_JFFS2 # define CONFIG_CMD_UBI @@ -315,7 +253,7 @@ #define CONFIG_SYS_MAXARGS 15 #define CONFIG_SYS_LONGHELP /* default load address */ -#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START +#define CONFIG_SYS_LOAD_ADDR 0 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" @@ -342,15 +280,10 @@ #define CONFIG_CMDLINE_EDITING -#define CONFIG_NETCONSOLE #define CONFIG_SYS_CONSOLE_IS_IN_ENV -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Enable flat device tree support */ #define CONFIG_LMB 1 -#define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #if defined(CONFIG_XILINX_AXIEMAC) @@ -358,20 +291,19 @@ # define CONFIG_CMD_MII 1 # define CONFIG_PHY_GIGE 1 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -# define CONFIG_PHYLIB 1 # define CONFIG_PHY_ATHEROS 1 # define CONFIG_PHY_BROADCOM 1 # define CONFIG_PHY_DAVICOM 1 # define CONFIG_PHY_LXT 1 # define CONFIG_PHY_MARVELL 1 # define CONFIG_PHY_MICREL 1 +# define CONFIG_PHY_MICREL_KSZ9021 # define CONFIG_PHY_NATSEMI 1 # define CONFIG_PHY_REALTEK 1 # define CONFIG_PHY_VITESSE 1 #else # undef CONFIG_MII # undef CONFIG_CMD_MII -# undef CONFIG_PHYLIB #endif /* SPL part */ diff --git a/include/configs/ml507.h b/include/configs/ml507.h deleted file mode 100644 index 89a72904b3..0000000000 --- a/include/configs/ml507.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/xilinx/ml507/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 256 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h deleted file mode 100644 index 298fa3e6d0..0000000000 --- a/include/configs/v5fx30teval.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/avnet/v5fx30teval/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x1A0000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define MTDIDS_DEFAULT "nor0=v5fx30t-flash" -#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index eb400d0960..d01d88b33f 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -101,22 +101,10 @@ #define CONFIG_SYS_NO_FLASH #endif -/* serial communication */ -#ifdef XPAR_UARTLITE_0_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define XILINX_UARTLITE_BASEADDR XPAR_UARTLITE_0_BASEADDR -#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#else -#ifdef XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_OF_LIBFDT 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } -#endif -#endif +/* The following table includes the supported baudrates */ +# define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h index 40fa0878a4..6182b0e7cf 100644 --- a/include/configs/xilinx-ppc405-generic.h +++ b/include/configs/xilinx-ppc405-generic.h @@ -1,7 +1,7 @@ /* * * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -14,6 +14,9 @@ #include "../board/xilinx/ppc405-generic/xparameters.h" +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + /* sdram */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 @@ -26,16 +29,16 @@ #define CONFIG_ENV_OVERWRITE 1 /*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" +#define CONFIG_PREBOOT "echo U-Boot is up and running;" /*Flash*/ -#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 -#define MTDIDS_DEFAULT "nor0=ppc405-flash" -#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" -#include <configs/xilinx-ppc405.h> +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h deleted file mode 100644 index a0151fe8f4..0000000000 --- a/include/configs/xilinx-ppc405.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * - * (C) Copyright 2008 - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* cpu parameter */ -#define CONFIG_405 1 -#define CONFIG_XILINX_405 1 - -#include <configs/xilinx-ppc.h> - -#endif diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h index 95b8834078..f2505a6cd2 100644 --- a/include/configs/xilinx-ppc440-generic.h +++ b/include/configs/xilinx-ppc440-generic.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,31 +8,42 @@ #ifndef __CONFIG_H #define __CONFIG_H -/*CPU*/ +/* CPU */ #define CONFIG_440 1 +#define CONFIG_XILINX_440 1 #define CONFIG_XILINX_PPC440_GENERIC 1 #include "../board/xilinx/ppc440-generic/xparameters.h" -/*Mem Map*/ +/* Mem Map */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 -/*Env*/ +/* Env */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 +#define CONFIG_ENV_OFFSET 0x340000 #define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> +/* Misc */ +#define CONFIG_PREBOOT "echo U-Boot is up and running;" + +/* Flash */ +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" + +/* Net */ +#ifdef XPAR_LLTEMAC_0_BASEADDR +#define CONFIG_XILINX_LL_TEMAC +#define CONFIG_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MARVELL +#define CONFIG_NET_RANDOM_ETHADDR +#define CONFIG_LIB_RAND +#endif + +/* Generic Configs */ +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h deleted file mode 100644 index f45700878e..0000000000 --- a/include/configs/xilinx-ppc440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_GEN_H -#define __CONFIG_GEN_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_440 1 - -#include <configs/xilinx-ppc.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 03f74508ef..27ef74daf5 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -23,10 +23,8 @@ #define GICD_BASE 0xF9010000 #define GICC_BASE 0xF9020000 -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE @@ -37,7 +35,9 @@ /* Cache Definitions */ #define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#if !defined(CONFIG_IDENT_STRING) +# define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#endif #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -45,7 +45,9 @@ #define CONFIG_OF_LIBFDT /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ -#define COUNTER_FREQUENCY 4000000 +#if !defined(COUNTER_FREQUENCY) +# define COUNTER_FREQUENCY 100000000 +#endif /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) @@ -137,9 +139,9 @@ #define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ - "set dfu_alt_info " \ - "Image ram 0x200000 0x1800000\\\\;" \ - "system.dtb ram 0x7000000 0x40000\0" \ + "setenv dfu_alt_info " \ + "Image ram $kernel_addr $kernel_size\\\\;" \ + "system.dtb ram $fdt_addr $fdt_size\0" \ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" @@ -156,12 +158,14 @@ "kernel_addr=0x80000\0" \ "fdt_addr=0x7000000\0" \ "fdt_high=0x10000000\0" \ - "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \ - "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "sdbootdev=0\0"\ + "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \ + "load mmc $sdbootdev:$partid $kernel_addr Image && " \ + "booti $kernel_addr - $fdt_addr\0" \ DFU_ALT_INFO -#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \ - "earlycon=cdns,mmio,0xff000000,${baudrate}n8" #define CONFIG_PREBOOT "run bootargs" #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 5 @@ -189,7 +193,10 @@ # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHY_MARVELL +# define CONFIG_PHY_NATSEMI # define CONFIG_PHY_TI +# define CONFIG_PHY_GIGE +# define PHY_ANEG_TIMEOUT 20000 #endif /* I2C */ diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index ec39211af3..9906c426f5 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -1,7 +1,5 @@ /* - * Configuration for Xilinx ZynqMP emulation - * platforms. See zynqmp-common.h for ZynqMP - * common configs + * Configuration for Xilinx ZynqMP emulation platforms * * (C) Copyright 2014 - 2015 Xilinx, Inc. * Michal Simek <michal.simek@xilinx.com> @@ -17,6 +15,7 @@ #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 +#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9) #define CONFIG_ZYNQ_I2C0 #define CONFIG_SYS_I2C_ZYNQ #define CONFIG_ZYNQ_EEPROM @@ -24,6 +23,13 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR} +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define COUNTER_FREQUENCY 4000000 + #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_EP_H */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 0ab60839b6..e8c3ef0c38 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -66,7 +66,6 @@ #ifdef CONFIG_ZYNQ_QSPI # define CONFIG_SF_DEFAULT_SPEED 30000000 # define CONFIG_SPI_FLASH_ISSI -# define CONFIG_SPI_FLASH_BAR # define CONFIG_CMD_SF #endif diff --git a/include/fpga.h b/include/fpga.h index e0d12981b2..d768fb1417 100644 --- a/include/fpga.h +++ b/include/fpga.h @@ -46,6 +46,7 @@ typedef struct { /* typedef fpga_desc */ typedef enum { BIT_FULL = 0, BIT_PARTIAL, + BIT_NONE = 0xFF, } bitstream_type; /* root function definitions */ diff --git a/include/netdev.h b/include/netdev.h index de74b9a534..244f23f93c 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -80,11 +80,6 @@ int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); int armada100_fec_register(unsigned long base_addr); -int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, - unsigned long dma_addr); -int xilinx_emaclite_of_init(const void *blob); -int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, - int txpp, int rxpp); int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); /* |