Merge branch 'for-2023.04' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx

- A fix for a long standing bug that has been exposed by commit 50128aeb0f8 ("cyclic: get rid of cyclic_init()") preventing 8xx boards from booting since u-boot 2023.01 - A GPIO driver for powerpc 8xx chip - Fixup for powerpc 8xx SPI driver - A new powerpc 8xx board - The two devices having that board.
author: Tom Rini <trini@konsulko.com> 2023-02-12 23:25:09 +0300
committer: Tom Rini <trini@konsulko.com> 2023-02-12 23:25:09 +0300
commit: 386e77cda8b690dbf5b2b7c828b3313205e5078c (patch)
tree: 50308d557caee50e8decc77f4be5ddfdeabcc9cb
parent: 0d91c88230fe8bd9f8d39ca2ab69cd6282e9f949 (diff)
parent: 6a8c36b936ab69a7521ec1ecfd20f7b85f7f59c5 (diff)
download: u-boot-386e77cda8b690dbf5b2b7c828b3313205e5078c.tar.xz
29 files changed, 2129 insertions, 140 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e0801c2594..bee59c3bea 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -28,6 +28,7 @@ config MPC85xx
 
 config MPC8xx
 	bool "MPC8xx"
+	select CREATE_ARCH_SYMLINK
 	select BOARD_EARLY_INIT_F
 	imply CMD_REGINFO
 	imply WDT_MPC8xx
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index d63071104c..628d3617bc 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -11,6 +11,9 @@ choice
 config TARGET_MCR3000
 	bool "Support MCR3000 board from CSSI"
 
+config TARGET_CMPC885
+	bool "Support CMPC885 board from CSSI"
+
 endchoice
 
 choice
@@ -84,6 +87,7 @@ config SYS_DER
 	help
 	  Debug Event Register (37-47)
 
-source "board/cssi/MCR3000/Kconfig"
+source "board/cssi/mcr3000/Kconfig"
 
+source "board/cssi/cmpc885/Kconfig"
 endmenu
diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S
index 1f1107e61d..0aa73fca12 100644
--- a/arch/powerpc/cpu/mpc8xx/start.S
+++ b/arch/powerpc/cpu/mpc8xx/start.S
@@ -171,6 +171,7 @@ in_flash:
 	lis	r3, CONFIG_SYS_IMMR@h
 	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
 
+	li	r3, 0		/* clear boot_flag for calling board_init_f */
 	bl	board_init_f	/* run 1st part of board init code (from Flash) */
 
 	/* NOTREACHED - board_init_f() does not return */
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index a4b0d7ddc4..26b592b85d 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_TARGET_TUGE1) += kmtuge1.dtb
 dtb-$(CONFIG_TARGET_TUXX1) += kmtuxa1.dtb
 dtb-$(CONFIG_TARGET_MCR3000) += mcr3000.dtb
 dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb
+dtb-$(CONFIG_TARGET_CMPC885) += cmpc885.dtb
 
 include $(srctree)/scripts/Makefile.dts
 
diff --git a/arch/powerpc/dts/cmpc885.dts b/arch/powerpc/dts/cmpc885.dts
new file mode 100644
index 0000000000..adda0f3e9d
--- /dev/null
+++ b/arch/powerpc/dts/cmpc885.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CMPC885 Device Tree Source
+ *
+ * Copyright 2020 CS Group
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "CMPC885";
+	compatible = "fsl, cmpc885", "fsl,mod885";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		stdout-path = &SERIAL;
+	};
+
+	WDT: watchdog@0 {
+		device_type = "watchdog";
+		compatible = "fsl,pq1-wdt";
+	};
+
+	SERIAL: serial {
+		compatible = "fsl,pq1-smc";
+	};
+
+	FEC1: fec@0 {
+		compatible = "fsl,pq1-fec1";
+	};
+
+	FEC2: fec@1 {
+		compatible = "fsl,pq1-fec2";
+	};
+
+	soc: immr@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device-type = "soc";
+		compatible = "simple-bus";
+		ranges = <0 0xff000000 0x4000>;
+		reg = <0xff000000 0x00000200>;
+
+		CPM1_PIO_B: gpio-controller@ab8 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm1-pario-bank-b";
+			reg = <0xab8 0x10>;
+			gpio-controller;
+		};
+
+		CPM1_PIO_D: gpio-controller@970 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm1-pario-bank-d";
+			reg = <0x970 0x10>;
+			gpio-controller;
+		};
+
+		CPM1_PIO_A: gpio-controller@950 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm1-pario-bank-a";
+			reg = <0x950 0x10>;
+			gpio-controller;
+		};
+
+		CPM1_PIO_C: gpio-controller@960 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm1-pario-bank-c";
+			reg = <0x960 0x10>;
+			gpio-controller;
+		};
+
+		CPM1_PIO_E: gpio-controller@ac8 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm1-pario-bank-e";
+			reg = <0xac8 0x18>;
+			gpio-controller;
+		};
+
+		spi: spi@aa0 {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			compatible = "fsl,mpc8xx-spi";
+			gpios = <&CPM1_PIO_B 21 1>; /* /EEPROM_CS ACTIVE_LOW */
+
+			eeprom@0 {
+				cell-index = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/include/asm/arch-mpc8xx/gpio.h b/arch/powerpc/include/asm/arch-mpc8xx/gpio.h
new file mode 100644
index 0000000000..6b73acbaee
--- /dev/null
+++ b/arch/powerpc/include/asm/arch-mpc8xx/gpio.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _MPC8XX_GPIO_H_
+#define _MPC8XX_GPIO_H_
+
+struct mpc8xx_gpio_plat {
+	ulong addr;
+	unsigned long size;
+	uint ngpios;
+};
+
+#endif	/* MPC8XX_GPIO_H_ */
diff --git a/board/cssi/MAINTAINERS b/board/cssi/MAINTAINERS
index 7d237b0b20..d8e7b5e9b6 100644
--- a/board/cssi/MAINTAINERS
+++ b/board/cssi/MAINTAINERS
@@ -2,5 +2,7 @@ BOARDS from CS GROUP France
 M:	Christophe Leroy <christophe.leroy@csgroup.eu>
 S:	Maintained
 F:	board/cssi/
-F:	include/configs/MCR3000.h
+F:	include/configs/mcr3000.h
 F:	configs/MCR3000_defconfig
+F:	include/configs/cmpc885.h
+F:	configs/CMPC885_defconfig
diff --git a/board/cssi/cmpc885/Kconfig b/board/cssi/cmpc885/Kconfig
new file mode 100644
index 0000000000..4a23f89aa1
--- /dev/null
+++ b/board/cssi/cmpc885/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_CMPC885
+
+config SYS_BOARD
+	default "cmpc885"
+
+config SYS_VENDOR
+	default "cssi"
+
+config SYS_CONFIG_NAME
+	default "cmpc885"
+
+config TEXT_BASE
+	default 0x40000000
+
+config CPLD_BASE
+	hex
+	default 0xc8000000
+
+config FPGA_BASE
+	hex
+	default 0xd0000000
+
+endif
diff --git a/board/cssi/cmpc885/Makefile b/board/cssi/cmpc885/Makefile
new file mode 100644
index 0000000000..6c055097cd
--- /dev/null
+++ b/board/cssi/cmpc885/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2010-2020 CS Group
+# Charles Frey <charles.frey@c-s.fr>
+# Christophe Leroy <christophe.leroy@c-s.fr>
+#
+
+obj-y += cmpc885.o
+obj-y += sdram.o
+obj-$(CONFIG_CMD_NAND) += nand.o
diff --git a/board/cssi/cmpc885/cmpc885.c b/board/cssi/cmpc885/cmpc885.c
new file mode 100644
index 0000000000..5233c24aae
--- /dev/null
+++ b/board/cssi/cmpc885/cmpc885.c
@@ -0,0 +1,1106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010-2020 CS Group
+ * Charles Frey <charles.frey@c-s.fr>
+ * Florent Trinh Thai <florent.trinh-thai@c-s.fr>
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ *
+ * Board specific routines for the CMPC885 board
+ */
+
+#include <env.h>
+#include <common.h>
+#include <mpc8xx.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <watchdog.h>
+#include <serial.h>
+#include <hang.h>
+#include <flash.h>
+#include <init.h>
+#include <fdt_support.h>
+#include <linux/delay.h>
+
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BOARD_CMPC885		"cmpc885"
+#define BOARD_MCR3000_2G	"mcr3k_2g"
+#define BOARD_VGOIP		"vgoip"
+#define BOARD_MIAE		"miae"
+
+#define TYPE_MCR	0x22
+#define TYPE_MIAE	0x23
+
+#define FAR_CASRSA     2
+#define FAR_VGOIP      4
+#define FAV_CLA        7
+#define FAV_SRSA       8
+
+#define ADDR_CPLD_R_RESET		((unsigned short __iomem *)CONFIG_CPLD_BASE)
+#define ADDR_CPLD_R_ETAT		((unsigned short __iomem *)(CONFIG_CPLD_BASE + 2))
+#define ADDR_CPLD_R_TYPE		((unsigned char  __iomem *)(CONFIG_CPLD_BASE + 3))
+
+#define ADDR_FPGA_R_BASE		((unsigned char  __iomem *)CONFIG_FPGA_BASE)
+#define ADDR_FPGA_R_ALARMES_IN		((unsigned char  __iomem *)CONFIG_FPGA_BASE + 0x31)
+#define ADDR_FPGA_R_FAV			((unsigned char  __iomem *)CONFIG_FPGA_BASE + 0x44)
+
+#define PATH_PHY2			"/soc@ff000000/mdio@e00/ethernet-phy@2"
+#define PATH_PHY3			"/soc@ff000000/mdio@e00/ethernet-phy@3"
+#define PATH_ETH1			"/soc@ff000000/ethernet@1e00"
+#define FIBER_PHY PATH_PHY2
+
+#define FPGA_R_ACQ_AL_FAV	0x04
+#define R_ETAT_PRES_BASE	0x0040
+
+#define R_RESET_STATUS		0x0400
+#define R_RST_STATUS		0x0004
+
+static int fdt_set_node_and_value(void *blob, char *node, const char *prop,
+				  void *var, int size)
+{
+	int ret, off;
+
+	off = fdt_path_offset(blob, node);
+
+	if (off < 0) {
+		printf("Cannot find %s node err:%s\n", node, fdt_strerror(off));
+
+		return off;
+	}
+
+	ret = fdt_setprop(blob, off, prop, var, size);
+
+	if (ret < 0)
+		printf("Cannot set %s/%s prop err: %s\n", node, prop, fdt_strerror(ret));
+
+	return ret;
+}
+
+/* Checks front/rear id and remove unneeded nodes from the blob */
+static void ft_cleanup(void *blob, uint32_t id, const char *prop, const char *compatible)
+{
+	int off;
+
+	off = fdt_node_offset_by_compatible(blob, -1, compatible);
+
+	while (off != -FDT_ERR_NOTFOUND) {
+		const struct fdt_property *ids;
+		int nb_ids, idx;
+		int tmp = -1;
+
+		ids = fdt_get_property(blob, off, prop, &nb_ids);
+
+		for (idx = 0; idx < nb_ids; idx += 4) {
+			if (*((uint32_t *)&ids->data[idx]) == id)
+				break;
+		}
+
+		if (idx >= nb_ids)
+			fdt_del_node(blob, off);
+		else
+			tmp = off;
+
+		off = fdt_node_offset_by_compatible(blob, tmp, compatible);
+	}
+
+	fdt_set_node_and_value(blob, "/", prop, &id, sizeof(uint32_t));
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	u8 fav_id, far_id;
+
+	const char *sync = "receive";
+
+	ft_cpu_setup(blob, bd);
+
+	/* BRG */
+	do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", bd->bi_busfreq, 1);
+
+	/* MAC addr */
+	fdt_fixup_ethernet(blob);
+
+	/* Bus Frequency for CPM */
+	do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
+
+	/* E1 interface - Set data rate */
+	do_fixup_by_path_u32(blob, "/localbus/e1", "data-rate", 2, 1);
+
+	/* E1 interface - Set channel phase to 0 */
+	do_fixup_by_path_u32(blob, "/localbus/e1", "channel-phase", 0, 1);
+
+	/* E1 interface - rising edge sync pulse transmit */
+	do_fixup_by_path(blob, "/localbus/e1", "rising-edge-sync-pulse", sync, strlen(sync), 1);
+
+	/* MIAE only */
+	if (!(in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) || in_8(ADDR_FPGA_R_BASE) != TYPE_MIAE)
+		return 0;
+
+	far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5;
+	ft_cleanup(blob, (u32)far_id, "far-id", "cs,mia-far");
+
+	/*
+	 * special case, with CASRSA (far_id: 2)
+	 * FAV-SRSA register itself as FAV-CLA
+	 */
+	fav_id = in_8(ADDR_FPGA_R_BASE + 0x44) >> 5;
+
+	if (far_id == FAR_CASRSA && fav_id == FAV_CLA)
+		fav_id = FAV_SRSA;
+
+	ft_cleanup(blob, (u32)fav_id, "fav-id", "cs,mia-fav");
+
+	if (far_id == FAR_CASRSA) {
+		/* switch to phy3 with gpio, we'll only use phy3 */
+		immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+		cpm8xx_t __iomem *cp = (cpm8xx_t __iomem *)&immr->im_cpm;
+
+		setbits_be32(&cp->cp_pedat, 0x00002000);
+	}
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	serial_puts("Board: ");
+
+	/* Is a motherboard present ? */
+	if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
+		switch (in_8(ADDR_FPGA_R_BASE)) {
+			int far_id;
+		case TYPE_MCR:
+			printf("MCR3000_2G (CS GROUP)\n");
+			break;
+		case TYPE_MIAE:
+			far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5;
+
+			if (far_id == FAR_VGOIP)
+				printf("VGoIP (CS GROUP)\n");
+			else
+				printf("MIAE (CS GROUP)\n");
+
+			break;
+		default:
+			printf("Unknown\n");
+			for (;;)
+				;
+			break;
+		}
+	} else {
+		printf("CMPC885 (CS GROUP)\n");
+	}
+	return 0;
+}
+
+#define SPI_EEPROM_READ	0x03
+#define MAX_SPI_BYTES	0x20
+
+#define EE_OFF_MAC1	0x13
+#define EE_OFF_MAC2	0x19
+
+/* Reads MAC addresses from SPI EEPROM */
+static int setup_mac(void)
+{
+	struct udevice *eeprom;
+	struct spi_slave *slave;
+	char name[30], *str;
+	uchar din[MAX_SPI_BYTES];
+	uchar dout[MAX_SPI_BYTES] = {SPI_EEPROM_READ, 0, 0};
+	int bitlen = 256, cs = 0, mode = 0, bus = 0, ret;
+	unsigned long ident = 0x08005120;
+
+	snprintf(name, sizeof(name), "generic_%d:%d", bus, cs);
+
+	str = strdup(name);
+	if (!str)
+		return -1;
+
+	ret = uclass_get_device(UCLASS_SPI, 0, &eeprom);
+	if (ret) {
+		printf("Could not enable Serial Peripheral Interface (SPI).\n");
+		return -1;
+	}
+
+	ret = _spi_get_bus_and_cs(bus, cs, 1000000, mode, "spi_generic_drv", str, &eeprom, &slave);
+	if (ret)
+		return ret;
+
+	ret = spi_claim_bus(slave);
+
+	ret = spi_xfer(slave, bitlen, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
+	if (ret) {
+		printf("Error %d during SPI transaction\n", ret);
+		return ret;
+	}
+
+	if (memcmp(din + EE_OFF_MAC1, &ident, sizeof(ident)) == 0)
+		eth_env_set_enetaddr("ethaddr", din + EE_OFF_MAC1);
+
+	if (memcmp(din + EE_OFF_MAC2, &ident, sizeof(ident)) == 0)
+		eth_env_set_enetaddr("eth1addr", din + EE_OFF_MAC2);
+
+	spi_release_bus(slave);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	u8 val, tmp, far_id;
+	int count = 3;
+
+	val = in_8(ADDR_FPGA_R_BASE);
+
+	/* Verify mother board presence */
+	if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
+		/* identify the type of mother board */
+		switch (val) {
+		case TYPE_MCR:
+			/* if at boot alarm button is pressed, delay boot */
+			if ((in_8(ADDR_FPGA_R_ALARMES_IN) & FPGA_R_ACQ_AL_FAV) == 0)
+				env_set("bootdelay", "60");
+
+			env_set("config", BOARD_MCR3000_2G);
+			env_set("hostname", BOARD_MCR3000_2G);
+			break;
+
+		case TYPE_MIAE:
+			do {
+				tmp = in_8(ADDR_FPGA_R_BASE + 0x41);
+				count--;
+				mdelay(10); /* 10msec wait */
+			} while (count && tmp != in_8(ADDR_FPGA_R_BASE + 0x41));
+
+			if (!count) {
+				printf("Cannot read the reset factory switch position\n");
+				hang();
+			}
+
+			if (tmp & 0x1)
+				env_set_default("Factory settings switch ON", 0);
+
+			env_set("config", BOARD_MIAE);
+			far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5;
+
+			if (far_id == FAR_VGOIP)
+				env_set("hostname", BOARD_VGOIP);
+			else
+				env_set("hostname", BOARD_MIAE);
+			break;
+
+		default:
+			env_set("config", BOARD_CMPC885);
+			env_set("hostname", BOARD_CMPC885);
+			break;
+		}
+	} else {
+		printf("no mother board detected");
+		env_set("config", BOARD_CMPC885);
+		env_set("hostname", BOARD_CMPC885);
+	}
+
+	if (setup_mac())
+		printf("Error retrieving mac addresses\n");
+
+	/* Protection ON by default */
+	flash_protect(FLAG_PROTECT_SET, CFG_SYS_FLASH_BASE, 0xffffffff, &flash_info[0]);
+
+	return 0;
+}
+
+static void iop_setup_mcr(void)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	iop8xx_t __iomem *iop = &immr->im_ioport;
+	cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+	/* Wait reset on FPGA_F */
+	udelay(100);
+
+	/* We must initialize data before changing direction */
+	setbits_be16(&iop->iop_pcdat, 0x088E);
+	setbits_be16(&iop->iop_pddat, 0x0001);
+	setbits_be32(&cp->cp_pbdat, 0x00029510);
+	setbits_be32(&cp->cp_pedat, 0x00000002);
+
+	/*
+	 * PAPAR[13] = 0 [0x0004] -> GPIO: ()
+	 * PAPAR[12] = 0 [0x0008] -> GPIO: ()
+	 * PAPAR[9]  = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
+	 * PAPAR[8]  = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
+	 * PAPAR[7]  = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
+	 * PAPAR[6]  = 1 [0x0200] -> GPIO: (CLK2)
+	 */
+	clrsetbits_be16(&iop->iop_papar, 0x03CC, 0x03C0);
+
+	/*
+	 * PBODR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
+	 */
+	setbits_be16(&cp->cp_pbodr, 0x00008000);
+
+	/*
+	 * PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
+	 * PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
+	 * PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
+	 * PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
+	 * PBDIR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
+	 * PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
+	 * PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
+	 */
+	setbits_be32(&cp->cp_pbdir, 0x0003A130);
+
+	/*
+	 * PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
+	 * PBPAR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
+	 * PBPAR[16] = 0 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
+	 */
+	clrsetbits_be32(&cp->cp_pbpar, 0x0000C800, 0x00000800);
+
+	/*
+	 * PCPAR[14] = 0 [0x0002] -> GPIO: (CS_POT2)
+	 */
+	clrbits_be16(&iop->iop_pcpar, 0x0002);
+
+	/*
+	 * PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
+	 * PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
+	 * PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
+	 * PDPAR[9]  = 1 [0x0040] -> GPIO: (TXD4)
+	 * PDPAR[7]  = 1 [0x0100] -> GPIO: (RTS3)
+	 * PDPAR[5]  = 1 [0x0400] -> GPIO: (CLK8)
+	 * PDPAR[3]  = 1 [0x1000] -> GPIO: (CLK7)
+	 */
+	setbits_be16(&iop->iop_pdpar, 0x1572);
+
+	/*
+	 * PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
+	 * PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
+	 * PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
+	 * PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
+	 * PEPAR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+	 * PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
+	 * PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
+	 * PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
+	 * PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
+	 * PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
+	 * PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+	 * PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+	 */
+	clrsetbits_be32(&cp->cp_pepar, 0x0003DFF0, 0x0003DEF0);
+
+	/*
+	 * PADIR[9]  = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
+	 * PADIR[8]  = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
+	 * PADIR[5]  = 1 [0x0400] -> GPIO: ()
+	 */
+	setbits_be16(&iop->iop_padir, 0x04C0);
+
+	/*
+	 * PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
+	 * PCDIR[14] = 1 [0x0002] -> GPIO: (CS_POT2)
+	 * PCDIR[13] = 1 [0x0004] -> GPIO: (CS_POT1)
+	 * PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
+	 * PCDIR[8]  = 1 [0x0080] -> GPIO: (CS_CODEC_FAV)
+	 * PCDIR[4]  = 1 [0x0800] -> GPIO: (CS_CODEC_RADIO)
+	 */
+	setbits_be16(&iop->iop_pcdir, 0x088F);
+
+	/*
+	 * PDDIR[9]  = 1 [0x0040] -> GPIO: (TXD4)
+	 * PDDIR[6]  = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
+	 * PDDIR[2]  = x [0x2000] -> Reserved
+	 * PDDIR[1]  = 0 [0x4000] -> ODR for PD10 : (TXD3)
+	 * PDDIR[0]  = 0 [0x8000] -> ODR for PD8  : (R_MDC)
+	 */
+	clrsetbits_be16(&iop->iop_pddir, 0xC240, 0x0040);
+
+	/*
+	 * PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
+	 * PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
+	 * PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
+	 * PEDIR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+	 * PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
+	 * PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
+	 * PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PEDIR[18] = 1 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
+	 * PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
+	 * PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+	 * PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+	 */
+	clrsetbits_be32(&cp->cp_pedir, 0x0003B732, 0x0003B632);
+
+	/*
+	 * PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
+	 */
+	setbits_be16(&iop->iop_paodr, 0x0020); // set_bit
+
+	/*
+	 * PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
+	 * PEODR[18] = 1 [0x00002000] -> GPIO: (FPGA_RADIO)
+	 */
+	setbits_be32(&cp->cp_peodr, 0x00002002);
+
+	/*
+	 * PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
+	 * PESO[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+	 * PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
+	 * PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+	 * PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+	 */
+	clrsetbits_be32(&cp->cp_peso, 0x00031980, 0x00031880);
+
+	/* Disable CS for device */
+	/* PROGFPGA down */
+	clrbits_be32(&cp->cp_pbdat, 0x00008000);
+
+	/* PROGFPGA down */
+	clrbits_be32(&cp->cp_pedat, 0x00002000);
+	udelay(1);	/* Wait more than 300ns */
+
+	/*
+	 * We do not set the PROG signal of the C4E1 because
+	 * there is a conflic with the CS of the EEPROM.
+	 * I don't know why there is not the same problem
+	 * with the FPGA_R
+	 */
+
+	/* PROGFPGA up	*/
+	setbits_be32(&cp->cp_pedat, 0x00002000);
+}
+
+static void iop_setup_cmpc885(void)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	iop8xx_t __iomem *iop = &immr->im_ioport;
+	cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+	/* We must initialize data before changing direction */
+	out_be16(&iop->iop_pcdat, 0x0000);
+	out_be16(&iop->iop_pddat, 0x0001);
+
+	out_be32(&cp->cp_pbdat, 0x00021400);
+	out_be32(&cp->cp_pedat, 0x00000000);
+
+	/*
+	 * PAPAR[13] = 0 [0x0004] -> GPIO: ()
+	 * PAPAR[12] = 0 [0x0008] -> GPIO: ()
+	 * PAPAR[9]  = 0 [0x0040] -> GPIO: ()
+	 * PAPAR[8]  = 0 [0x0080] -> GPIO: ()
+	 * PAPAR[7]  = 0 [0x0100] -> GPIO: ()
+	 * PAPAR[6]  = 0 [0x0200] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_papar, 0x03CC);
+
+	/*
+	 * PBPAR[20] = 0 [0x00000800] -> GPIO: ()
+	 * PBPAR[17] = 0 [0x00004000] -> GPIO: ()
+	 * PBPAR[16] = 0 [0x00008000] -> GPIO: ()
+	 */
+	clrbits_be32(&cp->cp_pbpar, 0x0000C800);
+
+	/*
+	 * PCPAR[14] = 0 [0x0002] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_pcpar, 0x0002);
+
+	/*
+	 * PDPAR[14] = 0 [0x0002] -> GPIO: ()
+	 * PDPAR[11] = 0 [0x0010] -> GPIO: ()
+	 * PDPAR[10] = 0 [0x0020] -> GPIO: ()
+	 * PDPAR[9]  = 0 [0x0040] -> GPIO: ()
+	 * PDPAR[7]  = 0 [0x0100] -> GPIO: ()
+	 * PDPAR[5]  = 0 [0x0400] -> GPIO: ()
+	 * PDPAR[3]  = 0 [0x1000] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_pdpar, 0x1572);
+
+	/*
+	 * PEPAR[27] = 0 [0x00000010] -> GPIO: ()
+	 * PEPAR[26] = 0 [0x00000020] -> GPIO: ()
+	 * PEPAR[25] = 0 [0x00000040] -> GPIO: ()
+	 * PEPAR[24] = 0 [0x00000080] -> GPIO: ()
+	 * PEPAR[23] = 0 [0x00000100] -> GPIO: ()
+	 * PEPAR[22] = 0 [0x00000200] -> GPIO: ()
+	 * PEPAR[21] = 0 [0x00000400] -> GPIO: ()
+	 * PEPAR[20] = 0 [0x00000800] -> GPIO: ()
+	 * PEPAR[19] = 0 [0x00001000] -> GPIO: ()
+	 * PEPAR[17] = 0 [0x00004000] -> GPIO: ()
+	 * PEPAR[16] = 0 [0x00008000] -> GPIO: ()
+	 * PEPAR[15] = 0 [0x00010000] -> GPIO: ()
+	 * PEPAR[14] = 0 [0x00020000] -> GPIO: ()
+	 */
+	clrbits_be32(&cp->cp_pepar, 0x0003DFF0);
+
+	/*
+	 * PADIR[9]  = 0 [0x0040] -> GPIO: ()
+	 * PADIR[8]  = 0 [0x0080] -> GPIO: ()
+	 * PADIR[5]  = 0 [0x0400] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_padir, 0x04C0);
+
+	/*
+	 * In/Out or per. Function 0/1
+	 * PBDIR[27] = 0 [0x00000010] -> GPIO: ()
+	 * PBDIR[26] = 0 [0x00000020] -> GPIO: ()
+	 * PBDIR[23] = 0 [0x00000100] -> GPIO: ()
+	 * PBDIR[17] = 0 [0x00004000] -> GPIO: ()
+	 * PBDIR[16] = 0 [0x00008000] -> GPIO: ()
+	 */
+	clrbits_be32(&cp->cp_pbdir, 0x0000C130);
+
+	/*
+	 * PCDIR[15] = 0 [0x0001] -> GPIO: ()
+	 * PCDIR[14] = 0 [0x0002] -> GPIO: ()
+	 * PCDIR[13] = 0 [0x0004] -> GPIO: ()
+	 * PCDIR[12] = 0 [0x0008] -> GPIO: ()
+	 * PCDIR[8]  = 0 [0x0080] -> GPIO: ()
+	 * PCDIR[4]  = 0 [0x0800] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_pcdir, 0x088F);
+
+	/*
+	 * PDDIR[9]  = 0 [0x0040] -> GPIO: ()
+	 * PDDIR[6]  = 0 [0x0200] -> GPIO: ()
+	 * PDDIR[2]  = x [0x2000] -> Reserved
+	 * PDDIR[1]  = 0 [0x4000] -> ODR for PD10 : ()
+	 * PDDIR[0]  = 0 [0x8000] -> ODR for PD8  : (R_MDC)
+	 */
+	clrbits_be16(&iop->iop_pddir, 0xC240);
+
+	/*
+	 * PEDIR[30] = 0 [0x00000002] -> GPIO: ()
+	 * PEDIR[27] = 0 [0x00000010] -> GPIO: ()
+	 * PEDIR[26] = 0 [0x00000020] -> GPIO: ()
+	 * PEDIR[23] = 0 [0x00000100] -> GPIO: ()
+	 * PEDIR[22] = 0 [0x00000200] -> GPIO: ()
+	 * PEDIR[21] = 0 [0x00000400] -> GPIO: ()
+	 * PEDIR[19] = 0 [0x00001000] -> GPIO: ()
+	 * PEDIR[18] = 0 [0x00002000] -> GPIO: ()
+	 * PEDIR[16] = 0 [0x00008000] -> GPIO: ()
+	 * PEDIR[15] = 0 [0x00010000] -> GPIO: ()
+	 * PEDIR[14] = 0 [0x00020000] -> GPIO: ()
+	 */
+	clrbits_be32(&cp->cp_pedir, 0x0003B732);
+
+	/*
+	 * PAODR[10] = 0 [0x0020] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_paodr, 0x0020);
+
+	/*
+	 * PBODR[16] = 0 [0x00008000] -> GPIO: ()
+	 */
+	clrbits_be16(&cp->cp_pbodr, 0x00008000);
+
+	/*
+	 * PEODR[30] = 0 [0x00000002] -> GPIO: ()
+	 * PEODR[18] = 0 [0x00002000] -> GPIO: ()
+	 */
+	clrbits_be32(&cp->cp_peodr, 0x00002002);
+
+	/*
+	 * PESO[24] = 0 [0x00000080] -> GPIO: ()
+	 * PESO[23] = 0 [0x00000100] -> GPIO: ()
+	 * PESO[20] = 0 [0x00000800] -> GPIO: ()
+	 * PESO[19] = 0 [0x00001000] -> GPIO: ()
+	 * PESO[15] = 0 [0x00010000] -> GPIO: ()
+	 * PESO[14] = 0 [0x00020000] -> GPIO: ()
+	 */
+	clrbits_be32(&cp->cp_peso, 0x00031980);
+}
+
+static void iop_setup_miae(void)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	iop8xx_t __iomem *iop = &immr->im_ioport;
+	cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+	/* Wait reset on FPGA_F */
+	udelay(100);
+
+	/* Set the front panel LED color to red */
+	clrbits_8(ADDR_FPGA_R_FAV, 0x02);
+
+	/* We must initialize data before changing direction */
+	setbits_be16(&iop->iop_pcdat, 0x0888);
+	setbits_be16(&iop->iop_pddat, 0x0201);
+	setbits_be32(&cp->cp_pbdat, 0x00021510);
+	setbits_be32(&cp->cp_pedat, 0x00000002);
+
+	/*
+	 * PAPAR[13] = 1 [0x0004] -> GPIO: (RXD2)
+	 * PAPAR[12] = 1 [0x0008] -> GPIO: (TXD2)
+	 * PAPAR[9]  = 1 [0x0040] -> GPIO: (TDM1O)
+	 * PAPAR[8]  = 1 [0x0080] -> GPIO: (TDM1I)
+	 * PAPAR[7]  = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
+	 * PAPAR[6]  = 1 [0x0200] -> GPIO: (CLK2)
+	 */
+	setbits_be16(&iop->iop_papar, 0x03CC);
+
+	/*
+	 * PBODR[16] = 0 [0x00008000] -> GPIO: (L1ST4)
+	 */
+	clrbits_be16(&cp->cp_pbodr, 0x00008000);
+
+	/*
+	 * PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
+	 * PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
+	 * PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
+	 * PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
+	 * PBDIR[16] = 0 [0x00008000] -> GPIO: (L1ST4)
+	 * PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
+	 * PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
+	 */
+	clrsetbits_be32(&cp->cp_pbdir, 0x0003A130, 0x00032130);
+
+	/*
+	 * PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
+	 * PBPAR[17] = 1 [0x00004000] -> GPIO: (L1ST3)
+	 * PBPAR[16] = 1 [0x00008000] -> GPIO: (L1ST4)
+	 */
+	setbits_be32(&cp->cp_pbpar, 0x0000C800);
+
+	/*
+	 * PCPAR[14] = 1 [0x0002] -> GPIO: (L1ST2)
+	 */
+	setbits_be16(&iop->iop_pcpar, 0x0002);
+
+	/*
+	 * PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
+	 * PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
+	 * PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
+	 * PDPAR[9]  = 1 [0x0040] -> GPIO: (TXD4)
+	 * PDPAR[7]  = 1 [0x0100] -> GPIO: (RTS3)
+	 * PDPAR[5]  = 1 [0x0400] -> GPIO: (CLK8)
+	 * PDPAR[3]  = 1 [0x1000] -> GPIO: (CLK7)
+	 */
+	setbits_be16(&iop->iop_pdpar, 0x1572);
+
+	/*
+	 * PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
+	 * PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
+	 * PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
+	 * PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
+	 * PEPAR[23] = 1 [0x00000100] -> GPIO: (L1ST1)
+	 * PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
+	 * PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
+	 * PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
+	 * PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
+	 * PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
+	 * PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+	 * PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+	 */
+	setbits_be32(&cp->cp_pepar, 0x0003DFF0);
+
+	/*
+	 * PADIR[9]  = 1 [0x0040] -> GPIO: (TDM1O)
+	 * PADIR[8]  = 1 [0x0080] -> GPIO: (TDM1I)
+	 * PADIR[5]  = 0 [0x0400] -> GPIO: ()
+	 */
+	clrsetbits_be16(&iop->iop_padir, 0x04C0, 0x00C0);
+
+	/*
+	 * PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
+	 * PCDIR[14] = 1 [0x0002] -> GPIO: (L1ST2)
+	 * PCDIR[13] = 0 [0x0004] -> GPIO: ()
+	 * PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
+	 * PCDIR[8]  = 1 [0x0080] -> GPIO: (CS_CODEC_2)
+	 * PCDIR[4]  = 1 [0x0800] -> GPIO: (CS_CODEC_1)
+	 */
+	clrsetbits_be16(&iop->iop_pcdir, 0x088F, 0x088B);
+
+	/*
+	 * PDDIR[9]  = 1 [0x0040] -> GPIO: (TXD4)
+	 * PDDIR[6]  = 1 [0x0200] -> GPIO: (CS_CODEC_3)
+	 */
+	setbits_be16(&iop->iop_pddir, 0x0240);
+
+	/*
+	 * PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
+	 * PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
+	 * PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
+	 * PEDIR[23] = 1 [0x00000100] -> GPIO: (L1ST1)
+	 * PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
+	 * PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
+	 * PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PEDIR[18] = 1 [0x00002000] -> GPIO: (PE18)
+	 * PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
+	 * PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+	 * PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+	 */
+	setbits_be32(&cp->cp_pedir, 0x0003B732);
+
+	/*
+	 * PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
+	 */
+	setbits_be16(&iop->iop_paodr, 0x0020);
+
+	/*
+	 * PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
+	 * PEODR[18] = 0 [0x00002000] -> GPIO: (PE18)
+	 */
+	clrsetbits_be32(&cp->cp_peodr, 0x00002002, 0x00000002);
+
+	/*
+	 * PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
+	 * PESO[23] = 1 [0x00000100] -> GPIO: (L1ST1)
+	 * PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
+	 * PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+	 * PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+	 */
+	setbits_be32(&cp->cp_peso, 0x00031980);
+}
+
+int board_early_init_f(void)
+{
+	return 0;
+}
+
+/* Specific board initialization */
+int board_early_init_r(void)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	iop8xx_t __iomem *iop = &immr->im_ioport;
+	cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+	/* MPC885 Port settings common to all boards */
+	setbits_be16(&iop->iop_padat, 0x0000);
+
+	/* Port A (MPC885 reference manual - 34.2) */
+	/*
+	 * In/Out or per. Function 0/1
+	 * PADIR[15] = 0 [0x0001] -> GPIO: (USB_RXD)
+	 * PADIR[14] = 0 [0x0002] -> GPIO: (USB_OE)
+	 * PADIR[13] = 0 [0x0004] -> GPIO: ()
+	 * PADIR[12] = 0 [0x0008] -> GPIO: ()
+	 * PADIR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
+	 * PADIR[10] = 0 [0x0020] -> GPIO: ()
+	 * PADIR[7]  = 0 [0x0100] -> GPIO: ()
+	 * PADIR[6]  = 0 [0x0200] -> GPIO: ()
+	 * PADIR[4]  = 1 [0x0800] -> GPIO: (R1_TXD1)
+	 * PADIR[3]  = 0 [0x1000] -> GPIO: (R1_RXER)
+	 * PADIR[2]  = 0 [0x2000] -> GPIO: (R1_CRS_DV)
+	 * PADIR[1]  = 0 [0x4000] -> GPIO: (R1_RXD0)
+	 * PADIR[0]  = 0 [0x8000] -> GPIO: (R1_RXD1)
+	 */
+	clrsetbits_be16(&iop->iop_padir, 0xFB3F, 0x0810);
+
+	/*
+	 * Open drain or active output
+	 * PAODR[15] = x [0x0001]
+	 * PAODR[14] = 0 [0x0002]
+	 * PAODR[13] = x [0x0004]
+	 * PAODR[12] = 0 [0x0008]
+	 * PAODR[11] = 0 [0x0010]
+	 * PAODR[9]  = 0 [0x0040]
+	 * PAODR[8]  = 0 [0x0080]
+	 * PAODR[7]  = 0 [0x0100]
+	 */
+	clrbits_be16(&iop->iop_paodr, 0x01DF);
+
+	/*
+	 * GPIO or per. Function
+	 * PAPAR[15] = 1 [0x0001] -> GPIO: (USB_RXD)
+	 * PAPAR[14] = 1 [0x0002] -> GPIO: (USB_OE)
+	 * PAPAR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
+	 * PAPAR[10] = 0 [0x0020] -> GPIO: (INIT_FPGA_F)
+	 * PAPAR[5]  = 0 [0x0400] -> GPIO: ()
+	 * PAPAR[4]  = 1 [0x0800] -> GPIO: (R1_TXD1)
+	 * PAPAR[3]  = 1 [0x1000] -> GPIO: (R1_RXER)
+	 * PAPAR[2]  = 1 [0x2000] -> GPIO: (R1_CRS_DV)
+	 * PAPAR[1]  = 1 [0x4000] -> GPIO: (R1_RXD0)
+	 * PAPAR[0]  = 1 [0x8000] -> GPIO: (R1_RXD1)
+	 */
+	clrsetbits_be16(&iop->iop_papar, 0xFC33, 0xF813);
+
+	/* Port B (MPC885 reference manual - 34.3) */
+	/*
+	 * In/Out or per. Function 0/1
+	 * PBDIR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
+	 * PBDIR[30] = 1 [0x00000002] -> GPIO: (CLK)
+	 * PBDIR[29] = 1 [0x00000004] -> GPIO: (MOSI)
+	 * PBDIR[28] = 1 [0x00000008] -> GPIO: (MISO)
+	 * PBDIR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
+	 * PBDIR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
+	 * PBDIR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
+	 * PBDIR[21] = 1 [0x00000400] -> GPIO: (CS_EEPROM)
+	 * PBDIR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
+	 * PBDIR[19] = 1 [0x00001000] -> GPIO: (WR_TEMP)
+	 * PBDIR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
+	 */
+	clrsetbits_be32(&cp->cp_pbdir, 0x00005ECF, 0x0000140E);
+
+	/*
+	 * Open drain or active output
+	 * PBODR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
+	 * PBODR[30] = 0 [0x00000002] -> GPIO: (CLK)
+	 * PBODR[29] = 0 [0x00000004] -> GPIO: (MOSI)
+	 * PBODR[28] = 0 [0x00000008] -> GPIO: (MISO)
+	 * PBODR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
+	 * PBODR[26] = 0 [0x00000020] -> GPIO: (BRG02)
+	 * PBODR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
+	 * PBODR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
+	 * PBODR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
+	 * PBODR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
+	 * PBODR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
+	 * PBODR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
+	 * PBODR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
+	 * PBODR[18] = 0 [0x00002000] -> GPIO: (RTS2)
+	 * PBODR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
+	 */
+	clrbits_be16(&cp->cp_pbodr, 0x00007FFF);
+
+	/*
+	 * GPIO or per. Function
+	 * PBPAR[31] = 1 [0x00000001] -> GPIO: (R1_REF_CLK)
+	 * PBPAR[30] = 1 [0x00000002] -> GPIO: (CLK)
+	 * PBPAR[29] = 1 [0x00000004] -> GPIO: (MOSI)
+	 * PBPAR[28] = 1 [0x00000008] -> GPIO: (MISO)
+	 * PBPAR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
+	 * PBPAR[26] = 0 [0x00000020] -> GPIO: (BRG02)
+	 * PBPAR[25] = 1 [0x00000040] -> GPIO: (SMTXD1)
+	 * PBPAR[24] = 1 [0x00000080] -> GPIO: (SMRXD1)
+	 * PBPAR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
+	 * PBPAR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
+	 * PBPAR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
+	 * PBPAR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
+	 * PBPAR[18] = 0 [0x00002000] -> GPIO: (RTS2)
+	 * PBPAR[15] = 0 [0x00010000] -> GPIO: (BRG03)
+	 * PBPAR[14] = 0 [0x00020000] -> GPIO: (CS_TEMP)
+	 */
+	clrsetbits_be32(&cp->cp_pbpar, 0x000337FF, 0x000000CF);
+
+	/* Port C (MPC885 Reference Manual - 34.4) */
+	/*
+	 * In/Out or per. Function 0/1
+	 * PCDIR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
+	 * PCDIR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
+	 * PCDIR[9]  = 0 [0x0040] -> GPIO: (CTS2)
+	 * PCDIR[7]  = 1 [0x0100] -> GPIO: (USB_TXP)
+	 * PCDIR[6]  = 1 [0x0200] -> GPIO: (USB_TXN)
+	 * PCDIR[5]  = 0 [0x0400] -> GPIO: (CTS3)
+	 */
+	clrsetbits_be16(&iop->iop_pcdir, 0x0770, 0x0300);
+
+	/*
+	 * GPIO or per. Function
+	 * PCPAR[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
+	 * PCPAR[13] = 0 [0x0004] -> GPIO: (CS_POT1)
+	 * PCPAR[12] = 0 [0x0008] -> GPIO: (CS_EEPROM2)
+	 * PCPAR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
+	 * PCPAR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
+	 * PCPAR[9]  = 0 [0x0040] -> GPIO: (CTS2)
+	 * PCPAR[8]  = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
+	 * PCPAR[7]  = 1 [0x0100] -> GPIO: (USB_TXP)
+	 * PCPAR[6]  = 1 [0x0200] -> GPIO: (USB_TXN)
+	 * PCPAR[5]  = 0 [0x0400] -> GPIO: (CTS3)
+	 * PCPAR[4]  = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
+	 */
+	clrsetbits_be16(&iop->iop_pcpar, 0x0FFD, 0x0300);
+
+	/*
+	 * Special Option register
+	 * PCSO[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
+	 * PCSO[14] = 0 [0x0002] -> GPIO: (CS_POT2)
+	 * PCSO[13] = x [0x0004] -> Reserved
+	 * PCSO[12] = x [0x0008] -> Reserved
+	 * PCSO[11] = 1 [0x0010] -> GPIO: (USB_RXP)
+	 * PCSO[10] = 1 [0x0020] -> GPIO: (USB_RXN)
+	 * PCSO[9]  = 1 [0x0040] -> GPIO: (CTS2)
+	 * PCSO[8]  = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
+	 * PCSO[7]  = 0 [0x0100] -> GPIO: (USB_TXP)
+	 * PCSO[6]  = 0 [0x0200] -> GPIO: (USB_TXN)
+	 * PCSO[5]  = 1 [0x0400] -> GPIO: (CTS3)
+	 * PCSO[4]  = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
+	 */
+	clrsetbits_be16(&iop->iop_pcso, 0x0FF3, 0x0470);
+
+	/*
+	 * Interrupt or IO
+	 * PCINT[15] = 0 [0x0001] -> GPIO: ()
+	 * PCINT[14] = 0 [0x0002] -> GPIO: ()
+	 * PCINT[13] = 0 [0x0004] -> GPIO: ()
+	 * PCINT[12] = 0 [0x0008] -> GPIO: ()
+	 * PCINT[11] = 0 [0x0010] -> GPIO: (USB_RXP)
+	 * PCINT[10] = 0 [0x0020] -> GPIO: (USB_RXN)
+	 * PCINT[9]  = 0 [0x0040] -> GPIO: ()
+	 * PCINT[8]  = 0 [0x0080] -> GPIO: ()
+	 * PCINT[7]  = 0 [0x0100] -> GPIO: (USB_TXP)
+	 * PCINT[6]  = 0 [0x0200] -> GPIO: (USB_TXN)
+	 * PCINT[5]  = 0 [0x0400] -> GPIO: ()
+	 * PCINT[4]  = 0 [0x0800] -> GPIO: ()
+	 */
+	clrbits_be16(&iop->iop_pcint, 0x0FFF);
+
+	/* Port D (MPC885 Reference Manual - 34.5) */
+	/*
+	 * In/Out or per. Function 0/1
+	 * PDDIR[15] = 1 [0x0001] -> GPIO: (CS_NAND)
+	 * PDDIR[14] = 0 [0x0002] -> GPIO: (TDM_FS_MPC)
+	 * PDDIR[13] = 1 [0x0004] -> GPIO: (ALE_NAND)
+	 * PDDIR[12] = 1 [0x0008] -> GPIO: (CLE_NAND)
+	 * PDDIR[11] = 0 [0x0010] -> GPIO: (RXD3)
+	 * PDDIR[10] = 0 [0x0020] -> GPIO: (TXD3)
+	 * PDDIR[9]  = 1 [0x0040] -> GPIO: (TXD4)
+	 * PDDIR[8]  = 0 [0x0080] -> GPIO: (R_MDC)
+	 * PDDIR[7]  = 0 [0x0100] -> GPIO: (RTS3)
+	 * PDDIR[5]  = 0 [0x0400] -> GPIO: (CLK8)
+	 * PDDIR[4]  = 0 [0x0800] -> GPIO: (CLK4)
+	 * PDDIR[3]  = 0 [0x1000] -> GPIO: (CLK7)
+	 */
+	clrsetbits_be16(&iop->iop_pddir, 0x1DFF, 0x004D);
+
+	/*
+	 * GPIO or per. Function
+	 * PDPAR[15] = 0 [0x0001] -> GPIO: (CS_NAND)
+	 * PDPAR[13] = 0 [0x0004] -> GPIO: (ALE_NAND)
+	 * PDPAR[12] = 0 [0x0008] -> GPIO: (CLE_NAND)
+	 * PDPAR[8]  = 1 [0x0080] -> GPIO: (R_MDC)
+	 * PDPAR[6]  = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
+	 * PDPAR[4]  = 1 [0x0800] -> GPIO: (CLK4)
+	 */
+	clrsetbits_be16(&iop->iop_pdpar, 0x0A8D, 0x0880);
+
+	/* Port E (MPC885 Reference Manual - 34.6) */
+	/*
+	 * In/Out or per. Function 0/1
+	 * PEDIR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+	 * PEDIR[29] = 1 [0x00000004] -> GPIO: (USB_SPEED)
+	 * PEDIR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
+	 * PEDIR[25] = 0 [0x00000040] -> GPIO: (RXD4)
+	 * PEDIR[24] = 0 [0x00000080] -> GPIO: (BRG01)
+	 * PEDIR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
+	 * PEDIR[17] = 0 [0x00004000] -> GPIO: (CLK5)
+	 */
+	clrsetbits_be32(&cp->cp_pedir, 0x000048CD, 0x0000000C);
+
+	/*
+	 * open drain or active output
+	 * PEODR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+	 * PEODR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
+	 * PEODR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
+	 * PEODR[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
+	 * PEODR[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
+	 * PEODR[25] = 0 [0x00000040] -> GPIO: (RXD4)
+	 * PEODR[24] = 0 [0x00000080] -> GPIO: (BRG01)
+	 * PEODR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+	 * PEODR[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
+	 * PEODR[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
+	 * PEODR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
+	 * PEODR[19] = 0 [0x00001000] -> GPIO: (R2_TXEN)
+	 * PEODR[17] = 0 [0x00004000] -> GPIO: (CLK5)
+	 * PEODR[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
+	 */
+	clrsetbits_be32(&cp->cp_peodr, 0x0000DFFD, 0x00000008);
+
+	/*
+	 * GPIO or per. Function
+	 * PEPAR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+	 * PEPAR[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
+	 * PEPAR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
+	 * PEPAR[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
+	 * PEPAR[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
+	 */
+	clrbits_be32(&cp->cp_pepar, 0x0000200F);
+
+	/*
+	 * Special Option register
+	 * PESO[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+	 * PESO[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
+	 * PESO[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
+	 * PESO[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
+	 * PESO[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
+	 * PESO[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
+	 * PESO[25] = 0 [0x00000040] -> GPIO: (RXD4)
+	 * PESO[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
+	 * PESO[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
+	 * PESO[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
+	 * PESO[17] = 0 [0x00004000] -> GPIO: (CLK5)
+	 * PESO[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
+	 */
+	clrbits_be32(&cp->cp_peso, 0x0000E67F);
+
+	/* Is a motherboard present ? */
+	if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
+		/* Initialize signal PROG_FPGA_FIRMWARE */
+		out_be32(&cp->cp_pedat, 0x00000002);
+		out_be32(&cp->cp_peodr, 0x00000002);
+		out_be32(&cp->cp_pedir, 0x00000002);
+
+		/* Check if fpga firmware is loaded */
+		if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
+			printf("Reloading FPGA firmware.\n");
+
+			/* Load fpga firmware */
+			/* Activate PROG_FPGA_FIRMWARE for 1 usec */
+			clrbits_be32(&cp->cp_pedat, 0x00000002);
+			udelay(1);
+			setbits_be32(&cp->cp_pedat, 0x00000002);
+
+			/* Wait 200 msec and check DONE_FPGA_FIRMWARE */
+			mdelay(200);
+			if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
+				for (;;) {
+					printf("error loading firmware.\n");
+					mdelay(500);
+				}
+			}
+
+			/* Send a reset signal and wait for 20 msec */
+			clrbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
+			mdelay(20);
+			setbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
+		}
+
+		/* Wait 300 msec and check the reset state */
+		mdelay(300);
+		if (!(in_be16(ADDR_CPLD_R_RESET) & R_RESET_STATUS)) {
+			for (;;) {
+				printf("Could not reset FPGA.\n");
+				mdelay(500);
+			}
+		}
+
+		/* is FPGA firmware loaded ? */
+		if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
+			printf("Reloading FPGA firmware\n");
+
+			/* Load FPGA firmware */
+			/* Activate PROG_FPGA_FIRMWARE for 1 usec */
+			clrbits_be32(&cp->cp_pedat, 0x00000002);
+			udelay(1);
+			setbits_be32(&cp->cp_pedat, 0x00000002);
+
+			/* Wait 200ms before checking DONE_FPGA_FIRMWARE */
+			mdelay(200);
+		}
+
+		/* Identify the type of mother board */
+		switch (in_8(ADDR_FPGA_R_BASE)) {
+		case TYPE_MCR:
+			iop_setup_mcr();
+			break;
+
+		case TYPE_MIAE:
+			iop_setup_miae();
+			break;
+
+		default:
+			break;
+		}
+	/* CMPC885 board alone */
+	} else {
+		iop_setup_cmpc885();
+	}
+
+	return 0;
+}
diff --git a/board/cssi/cmpc885/cmpc885.env b/board/cssi/cmpc885/cmpc885.env
new file mode 100644
index 0000000000..51ab5ce2cf
--- /dev/null
+++ b/board/cssi/cmpc885/cmpc885.env
@@ -0,0 +1,7 @@
+loadaddr=0x1a00000
+filename=cmpc885.itb
+console_args=console=ttyCPM0,115200N8
+loadkernel=ubi part nand0;ubifsmount ubi0;ubifsload ${loadaddr} /boot/${filename};ubifsumount; ubi detach
+flashboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ${ofl_args}; run loadkernel; bootm $loadaddr#$config
+tftpboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ${ofl_args}; tftp ${loadaddr} ${filename};bootm $loadaddr#$config
+update=echo 'Updating ubi image'; if tftp $loadaddr $ubifile; then nand erase.chip; nand write $loadaddr 0x00 $filesize; fi;
diff --git a/board/cssi/cmpc885/nand.c b/board/cssi/cmpc885/nand.c
new file mode 100644
index 0000000000..38100046df
--- /dev/null
+++ b/board/cssi/cmpc885/nand.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010-2020 CS Group
+ * Florent Trinh Thai <florent.trinh-thai@c-s.fr>
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ * Charles Frey <charles.frey@c-s.fr>
+ */
+
+#include <config.h>
+#include <common.h>
+#include <nand.h>
+#include <linux/bitops.h>
+#include <linux/mtd/rawnand.h>
+#include <asm/io.h>
+
+#define BIT_CLE		BIT(3)
+#define BIT_ALE		BIT(2)
+#define BIT_NCE		BIT(0)
+
+static u32 nand_mask(unsigned int ctrl)
+{
+	return ((ctrl & NAND_CLE) ? BIT_CLE : 0) |
+	       ((ctrl & NAND_ALE) ? BIT_ALE : 0) |
+	       (!(ctrl & NAND_NCE) ? BIT_NCE : 0);
+}
+
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	struct nand_chip *chip = mtd_to_nand(mtdinfo);
+
+	if (ctrl & NAND_CTRL_CHANGE)
+		clrsetbits_be16(&immr->im_ioport.iop_pddat,
+				BIT_CLE | BIT_ALE | BIT_NCE, nand_mask(ctrl));
+
+	if (cmd != NAND_CMD_NONE)
+		out_8(chip->IO_ADDR_W, cmd);
+}
+
+int board_nand_init(struct nand_chip *chip)
+{
+	chip->chip_delay	= 60;
+	chip->ecc.mode		= NAND_ECC_SOFT;
+	chip->cmd_ctrl		= nand_hwcontrol;
+
+	return 0;
+}
diff --git a/board/cssi/cmpc885/sdram.c b/board/cssi/cmpc885/sdram.c
new file mode 100644
index 0000000000..7349b85ed2
--- /dev/null
+++ b/board/cssi/cmpc885/sdram.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 CS Group
+ * Charles Frey <charles.frey@c-s.fr>
+ */
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <linux/delay.h>
+#include <init.h>
+#include <asm/io.h>
+#include <mpc8xx.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ADDR_CPLD_R_TYPE	((unsigned char __iomem *)CONFIG_CPLD_BASE + 3)
+
+#define _NOT_USED_  0xFFFFEC04
+
+static const uint sdram_table[] = {
+	/* DRAM - single read. (offset 0 in upm RAM) */
+	0x0F0CEC04, 0x0FFFEC04, 0x00AF2C04, 0x0FFFEC00,
+	0x0FFCE004, 0xFFFFEC05, _NOT_USED_, _NOT_USED_,
+
+	/* DRAM - burst read. (offset 8 in upm RAM) */
+	0x0F0CEC04, 0x0FFFEC04, 0x00AF2C04, 0x00FFEC00,
+	0x00FFEC00, 0x00FFEC00, 0x0FFCE000, 0x1FFFEC05,
+
+	/* DRAM - Precharge all banks. (offset 16 in upm RAM) */
+	_NOT_USED_, 0x0FFCE004, 0x1FFFEC05, _NOT_USED_,
+
+	/* DRAM - NOP. (offset 20 in upm RAM) */
+	0x1FFFEC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* DRAM - single write. (offset 24 in upm RAM) */
+	0x0F0CEC04, 0x0FFFEC00, 0x00AF2004, 0x0FFFEC04,
+	0x0FFCE004, 0x0FFFEC04, 0xFFFFEC05, _NOT_USED_,
+
+	/* DRAM - burst write. (offset 32 in upm RAM) */
+	0x0F0CEC04, 0x0FFFEC00, 0x00AF2000, 0x00FFEC00,
+	0x00FFEC00, 0x00FFEC04, 0x0FFFEC04, 0x0FFCE004,
+	0x1FFFEC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* refresh  (offset 48 in upm RAM) */
+	0x0FFDE404, 0x0FFEAC04, 0x0FFD6C84, 0x0FFFEC04,
+	0x0FFFEC04, 0x0FFFEC04, 0x0FFFEC04, 0x1FFFEC85,
+
+	/* init (offset 56 in upm RAM) */
+	0x0FEEA874, 0x0FBD6474, 0x1FFFEC45, _NOT_USED_,
+
+	/* exception. (offset 60 in upm RAM) */
+	0x0FFCE004, 0xFFFFEC05, _NOT_USED_, _NOT_USED_
+};
+
+/* SDRAM initialization */
+int dram_init(void)
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	memctl8xx_t __iomem *memctl = &immap->im_memctl;
+	u32 max_size, mamr;
+	u8 val;
+
+	printf("UPMA init for SDRAM (CAS latency 2), ");
+	printf("init address 0x%08x, size ", (int)dram_init);
+
+	/* Verify the SDRAM size of the board */
+	val = (in_8(ADDR_CPLD_R_TYPE) & 0x30) >> 4;
+
+	if (val == 0x03 || val == 0x00) {
+		max_size	= 64	* SZ_1M;	/* 64 Mo of SDRAM */
+		mamr		= 0x20104000;
+	} else {
+		max_size	= 128	* SZ_1M;	/* 128 Mo of SDRAM */
+		mamr		= 0x20206000;
+	}
+
+	/* Configure CS1 */
+	out_be32(&memctl->memc_or1,
+		 ~(max_size - 1) | OR_CSNT_SAM | OR_ACS_DIV2);
+	out_be32(&memctl->memc_br1, CFG_SYS_SDRAM_BASE | BR_MS_UPMA | BR_V);
+
+	/* Configure UPMA for CS1 */
+	upmconfig(UPMA, (uint *)sdram_table, ARRAY_SIZE(sdram_table));
+
+	out_be16(&memctl->memc_mptpr, MPTPR_PTP_DIV32);
+	/* disable refresh */
+	out_be32(&memctl->memc_mamr, mamr);
+	udelay(100);
+
+	/* NOP to maintain DQM high */
+	out_be32(&memctl->memc_mcr, 0x80002114);
+	udelay(200);
+
+	out_be32(&memctl->memc_mcr, 0x80002111); /* PRECHARGE cmd */
+	out_be32(&memctl->memc_mcr, 0x80002830); /* AUTO REFRESH cmd */
+	out_be32(&memctl->memc_mar, 0x00000088);
+	out_be32(&memctl->memc_mcr, 0x80002138);
+
+	/* Enable refresh */
+	setbits_be32(&memctl->memc_mamr, MAMR_PTAE);
+
+	gd->ram_size = get_ram_size((long *)CFG_SYS_SDRAM_BASE, max_size);
+
+	return 0;
+}
diff --git a/board/cssi/cmpc885/u-boot.lds b/board/cssi/cmpc885/u-boot.lds
new file mode 100644
index 0000000000..53f616fcfe
--- /dev/null
+++ b/board/cssi/cmpc885/u-boot.lds
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010-2020 CS Group
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ *
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by Yuli Barcohen <yuli@arabellasw.com>
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+	/* Read-only sections, merged into text segment: */
+	. = + SIZEOF_HEADERS;
+	.text          :
+	{
+		arch/powerpc/cpu/mpc8xx/start.o	(.text)
+		arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
+		arch/powerpc/lib/built-in.o		(.text*)
+		drivers/net/built-in.o		(.text*)
+
+		. = DEFINED(env_offset) ? env_offset : .;
+		env/embedded.o			(.text.environment)
+
+		*(.text)
+	}
+	_etext = .;
+	PROVIDE (etext = .);
+	.rodata    :
+	{
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	}
+
+	/* Read-write section, merged into data segment: */
+	. = (. + 0x0FFF) & 0xFFFFF000;
+	_erotext = .;
+	PROVIDE (erotext = .);
+	.reloc   :
+	{
+		_GOT2_TABLE_ = .;
+		KEEP(*(.got2))
+		KEEP(*(.got))
+		_FIXUP_TABLE_ = .;
+		KEEP(*(.fixup))
+	}
+	__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+	__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+	.data    :
+	{
+		*(.data*)
+		*(.sdata*)
+	}
+	_edata  =  .;
+	PROVIDE (edata = .);
+
+	. = .;
+
+	. = ALIGN(4);
+	__u_boot_list : {
+		KEEP(*(SORT(__u_boot_list*)));
+	}
+
+	. = .;
+	__start___ex_table = .;
+	__ex_table : { *(__ex_table) }
+	__stop___ex_table = .;
+
+	/*
+	 * _end - This is end of u-boot.bin image.
+	 * dtb will be appended here to make u-boot-dtb.bin
+	 */
+	_end = .;
+
+	. = ALIGN(4096);
+	__init_begin = .;
+	.text.init : { *(.text.init) }
+	.data.init : { *(.data.init) }
+	. = ALIGN(4096);
+	__init_end = .;
+
+	__bss_start = .;
+	.bss (NOLOAD)       :
+	{
+		*(.bss*)
+		*(.sbss*)
+		*(COMMON)
+		. = ALIGN(4);
+	}
+	__bss_end = . ;
+	PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/cssi/MCR3000/Kconfig b/board/cssi/mcr3000/Kconfig
index dbe2d5f0a3..ea073d9140 100644
--- a/board/cssi/MCR3000/Kconfig
+++ b/board/cssi/mcr3000/Kconfig
@@ -1,13 +1,13 @@
 if TARGET_MCR3000
 
 config SYS_BOARD
-	default "MCR3000"
+	default "mcr3000"
 
 config SYS_VENDOR
 	default "cssi"
 
 config SYS_CONFIG_NAME
-	default "MCR3000"
+	default "mcr3000"
 
 config TEXT_BASE
 	default 0x04000000
diff --git a/board/cssi/MCR3000/Makefile b/board/cssi/mcr3000/Makefile
index 68d6812a89..7803016af3 100644
--- a/board/cssi/MCR3000/Makefile
+++ b/board/cssi/mcr3000/Makefile
@@ -4,5 +4,5 @@
 # Christophe Leroy <christophe.leroy@c-s.fr>
 #
 
-obj-y += MCR3000.o
+obj-y += mcr3000.o
 obj-$(CONFIG_CMD_NAND) += nand.o
diff --git a/board/cssi/MCR3000/MCR3000.c b/board/cssi/mcr3000/mcr3000.c
index e95e04a30a..7b3ab12bd5 100644
--- a/board/cssi/MCR3000/MCR3000.c
+++ b/board/cssi/mcr3000/mcr3000.c
@@ -58,8 +58,6 @@ static const uint cs1_dram_table_66[] = {
 
 int ft_board_setup(void *blob, struct bd_info *bd)
 {
-	const char *sync = "receive";
-
 	ft_cpu_setup(blob, bd);
 
 	/* BRG */
@@ -72,16 +70,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	/* Bus Frequency for CPM */
 	do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
 
-	/* E1 interface - Set data rate */
-	do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1);
-
-	/* E1 interface - Set channel phase to 0 */
-	do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1);
-
-	/* E1 interface - rising edge sync pulse transmit */
-	do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse",
-			 sync, strlen(sync), 1);
-
 	return 0;
 }
 
diff --git a/board/cssi/mcr3000/mcr3000.env b/board/cssi/mcr3000/mcr3000.env
new file mode 100644
index 0000000000..372ab09094
--- /dev/null
+++ b/board/cssi/mcr3000/mcr3000.env
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+sdram_type=SDRAM
+flash_type=AM29LV160DB
+loadaddr=0x1200000
+filename=mcr3000.itb
+dhcp_ip=ip=:::::eth0:dhcp
+console_args=console=ttyCPM0,115200N8
+loadkernel=ubi part nand0;ubifsmount ubi0;ubifsload ${loadaddr} /boot/${filename};ubifsumount; ubi detach
+bootcmd=run flashboot
+flashboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off;${ofl_args}; run loadkernel; bootm ${loadaddr}
+tftpboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off ${ofl_args}; tftp ${loadaddr} ${filename}; bootm ${loadaddr}
+dhcpboot=dhcp ${loadaddr} ${filename};setenv bootargs ${console_args} ${dhcp_ip} ${ofl_args}; bootm ${loadaddr}
+update=echo 'Updating ubi image'; if tftp 0x2000 $ubifile; then nand erase.chip; nand write 0x2000 0x00 $filesize; fi
diff --git a/board/cssi/MCR3000/nand.c b/board/cssi/mcr3000/nand.c
index 11aca4ff73..11aca4ff73 100644
--- a/board/cssi/MCR3000/nand.c
+++ b/board/cssi/mcr3000/nand.c
diff --git a/board/cssi/MCR3000/u-boot.lds b/board/cssi/mcr3000/u-boot.lds
index 24b535e724..24b535e724 100644
--- a/board/cssi/MCR3000/u-boot.lds
+++ b/board/cssi/mcr3000/u-boot.lds
diff --git a/configs/CMPC885_defconfig b/configs/CMPC885_defconfig
new file mode 100644
index 0000000000..7dff6ff270
--- /dev/null
+++ b/configs/CMPC885_defconfig
@@ -0,0 +1,110 @@
+CONFIG_PPC=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="cmpc885"
+CONFIG_SYS_PROMPT="S3K> "
+CONFIG_ENV_ADDR=0x40004000
+CONFIG_MPC8xx=y
+CONFIG_TARGET_CMPC885=y
+CONFIG_MPC885=y
+CONFIG_8xx_GCLK_FREQ=132000000
+CONFIG_CMD_IMMAP=y
+CONFIG_SYS_SIUMCR=0x00620000
+CONFIG_SYS_SYPCR=0xFFFFFF8F
+CONFIG_SYS_TBSCR=0x00C3
+CONFIG_SYS_PISCR=0x0000
+CONFIG_SYS_PLPRCR_BOOL=y
+CONFIG_SYS_PLPRCR=0x374d4000
+CONFIG_SYS_SCCR=0x00420000
+CONFIG_SYS_SCCR_MASK=0x00000000
+CONFIG_SYS_DER=0x2002000F
+CONFIG_SYS_MONITOR_LEN=327680
+CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=5
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="\nEnter password - autoboot in %d sec...\n"
+CONFIG_AUTOBOOT_DELAY_STR="root"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run flashboot"
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_SYS_BOOTM_LEN=0x2000000
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_MII=y
+CONFIG_MII_INIT=y
+CONFIG_CMD_PING=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.0.3"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.0.1"
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_SYS_BR0_PRELIM_BOOL=y
+CONFIG_SYS_BR0_PRELIM=0x40000801
+CONFIG_SYS_OR0_PRELIM=0xFFC00924
+CONFIG_SYS_BR1_PRELIM_BOOL=y
+CONFIG_SYS_BR1_PRELIM=0x00000081
+CONFIG_SYS_OR1_PRELIM=0xFC000E00
+CONFIG_SYS_BR2_PRELIM_BOOL=y
+CONFIG_SYS_BR2_PRELIM=0xC0000401
+CONFIG_SYS_OR2_PRELIM=0xFFFF8142
+CONFIG_SYS_BR3_PRELIM_BOOL=y
+CONFIG_SYS_BR3_PRELIM=0xE0000801
+CONFIG_SYS_OR3_PRELIM=0xFF00010A
+CONFIG_SYS_BR4_PRELIM_BOOL=y
+CONFIG_SYS_BR4_PRELIM=0xD0000801
+CONFIG_SYS_OR4_PRELIM=0xFC000D08
+CONFIG_SYS_BR5_PRELIM_BOOL=y
+CONFIG_SYS_BR5_PRELIM=0xC8000801
+CONFIG_SYS_OR5_PRELIM=0xFFFF8D10
+CONFIG_SYS_BR6_PRELIM_BOOL=y
+CONFIG_SYS_BR6_PRELIM=0x80000801
+CONFIG_SYS_OR6_PRELIM=0xFFFF8908
+CONFIG_SYS_BR7_PRELIM_BOOL=y
+CONFIG_SYS_BR7_PRELIM=0xF0000001
+CONFIG_SYS_OR7_PRELIM=0xFFFF810A
+CONFIG_MPC8XX_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_SECT=71
+CONFIG_MTD_RAW_NAND=y
+CONFIG_RMII=y
+CONFIG_MPC8XX_FEC=y
+CONFIG_FEC1_PHY=1
+CONFIG_FEC2_PHY=2
+# CONFIG_PCI is not set
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MPC8XX_SPI=y
+CONFIG_WDT=y
+# CONFIG_REGEX is not set
+CONFIG_LZMA=y
diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig
index 3e16ffc2ef..f96e9f06e1 100644
--- a/configs/MCR3000_defconfig
+++ b/configs/MCR3000_defconfig
@@ -20,6 +20,7 @@ CONFIG_SYS_SCCR=0x00C20000
 CONFIG_SYS_SCCR_MASK=0x60000000
 CONFIG_SYS_DER=0x2002000F
 CONFIG_SYS_MONITOR_LEN=327680
+CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_MONITOR_BASE=0x04000000
 CONFIG_BOOTDELAY=5
@@ -36,11 +37,12 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PBSIZE=278
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_CONSOLE is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_ECHO is not set
 # CONFIG_CMD_ITEST is not set
@@ -51,6 +53,8 @@ CONFIG_CMD_MII=y
 CONFIG_MII_INIT=y
 CONFIG_CMD_PING=y
 # CONFIG_CMD_SLEEP is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
@@ -58,7 +62,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_IPADDR=y
 CONFIG_IPADDR="192.168.0.3"
 CONFIG_USE_NETMASK=y
-CONFIG_NETMASK="255.0.0.0"
+CONFIG_NETMASK="255.255.255.0"
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.0.1"
 CONFIG_SYS_BR0_PRELIM_BOOL=y
@@ -87,6 +91,7 @@ CONFIG_SYS_BR7_PRELIM=0x1C000001
 CONFIG_SYS_OR7_PRELIM=0xFFFF810A
 # CONFIG_MMC is not set
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_FLASH_SHOW_PROGRESS=0
@@ -97,5 +102,4 @@ CONFIG_MPC8XX_FEC=y
 # CONFIG_PCI is not set
 CONFIG_DM_SERIAL=y
 CONFIG_WDT=y
-CONFIG_SHA256=y
 CONFIG_LZMA=y
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 365615a53f..7d5ddbdee0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -547,6 +547,13 @@ config MPC8XXX_GPIO
 	  value setting, the open-drain feature, which can configure individual
 	  GPIOs to work as open-drain outputs, is supported.
 
+config MPC8XX_GPIO
+	bool "Freescale MPC8XX GPIO driver"
+	depends on DM_GPIO
+	help
+	  This driver supports parallel IO ports from MPC8XX CPUs.
+	  Each GPIO bank is identified by its own entry in the device tree.
+
 config MPC83XX_SPISEL_BOOT
 	bool "Freescale MPC83XX SPISEL_BOOT driver"
 	depends on DM_GPIO && ARCH_MPC830X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fcd136367a..1e81e36962 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_TEGRA186_GPIO)	+= tegra186_gpio.o
 obj-$(CONFIG_DA8XX_GPIO)	+= da8xx_gpio.o
 obj-$(CONFIG_ALTERA_PIO)	+= altera_pio.o
 obj-$(CONFIG_MPC8XXX_GPIO)	+= mpc8xxx_gpio.o
+obj-$(CONFIG_MPC8XX_GPIO)	+= mpc8xx_gpio.o
 obj-$(CONFIG_MPC83XX_SPISEL_BOOT)	+= mpc83xx_spisel_boot.o
 obj-$(CONFIG_SH_GPIO_PFC)	+= sh_pfc.o
 obj-$(CONFIG_OMAP_GPIO)	+= omap_gpio.o
diff --git a/drivers/gpio/mpc8xx_gpio.c b/drivers/gpio/mpc8xx_gpio.c
new file mode 100644
index 0000000000..2f65346533
--- /dev/null
+++ b/drivers/gpio/mpc8xx_gpio.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 CS Group
+ *	Charles Frey <charles.frey@c-s.fr>
+ *
+ * based on driver/gpio/mpc8xxx_gpio.c, which is
+ * Copyright 2016 Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ *
+ * based on arch/powerpc/include/asm/mpc85xx_gpio.h, which is
+ * Copyright 2010 eXMeritus, A Boeing Company
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <asm/gpio.h>
+#include <malloc.h>
+
+enum {
+	MPC8XX_CPM1_PORTA,
+	MPC8XX_CPM1_PORTB,
+	MPC8XX_CPM1_PORTC,
+	MPC8XX_CPM1_PORTD,
+	MPC8XX_CPM1_PORTE,
+};
+
+/*
+ * The MPC885 CPU CPM has 5 I/O ports, and each ports has different
+ * register length : 16 bits for ports A,C,D and 32 bits for ports
+ * B and E.
+ *
+ * This structure allows us to select the accessors according to the
+ * port we are configuring.
+ */
+struct mpc8xx_gpio_data {
+	/* The bank's register base in memory */
+	void __iomem *base;
+	/* The address of the registers; used to identify the bank */
+	ulong addr;
+	/* The GPIO count of the bank */
+	uint gpio_count;
+	/* Type needed to use the correct accessors */
+	int type;
+};
+
+/* Structure for ports A, C, D */
+struct iop_16 {
+	u16 pdir;
+	u16 ppar;
+	u16 podr;
+	u16 pdat;
+};
+
+/* Port B */
+struct iop_32_b {
+	u32 pdir;
+	u32 ppar;
+	u32 podr;
+	u32 pdat;
+};
+
+/* Port E */
+struct iop_32_e {
+	u32 pdir;
+	u32 ppar;
+	u32 psor;
+	u32 podr;
+	u32 pdat;
+};
+
+union iop_32 {
+	struct iop_32_b b;
+	struct iop_32_e e;
+};
+
+inline u32 gpio_mask(uint gpio, int type)
+{
+	if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE)
+		return 1U << (31 - (gpio));
+	else
+		return 1U << (15 - (gpio));
+}
+
+static inline u16 gpio16_get_val(void __iomem *base, u16 mask, int type)
+{
+	struct iop_16 *regs = base;
+
+	return in_be16(&regs->pdat) & mask;
+}
+
+static inline u16 gpio16_get_dir(void __iomem *base, u16 mask, int type)
+{
+	struct iop_16 *regs = base;
+
+	return in_be16(&regs->pdir) & mask;
+}
+
+static inline void gpio16_set_in(void __iomem *base, u16 gpios, int type)
+{
+	struct iop_16 *regs = base;
+
+	clrbits_be16(&regs->pdat, gpios);
+	/* GPDIR register 0 -> input */
+	clrbits_be16(&regs->pdir, gpios);
+}
+
+static inline void gpio16_set_lo(void __iomem *base, u16 gpios, int type)
+{
+	struct iop_16 *regs = base;
+
+	clrbits_be16(&regs->pdat, gpios);
+	/* GPDIR register 1 -> output */
+	setbits_be16(&regs->pdir, gpios);
+}
+
+static inline void gpio16_set_hi(void __iomem *base, u16 gpios, int type)
+{
+	struct iop_16 *regs = base;
+
+	setbits_be16(&regs->pdat, gpios);
+	/* GPDIR register 1 -> output */
+	setbits_be16(&regs->pdir, gpios);
+}
+
+/* PORT B AND E */
+static inline u32 gpio32_get_val(void __iomem *base, u32 mask, int type)
+{
+	union iop_32 __iomem *regs = base;
+
+	if (type == MPC8XX_CPM1_PORTB)
+		return in_be32(&regs->b.pdat) & mask;
+	else
+		return in_be32(&regs->e.pdat) & mask;
+}
+
+static inline u32 gpio32_get_dir(void __iomem *base, u32 mask, int type)
+{
+	union iop_32 __iomem *regs = base;
+
+	if (type == MPC8XX_CPM1_PORTB)
+		return in_be32(&regs->b.pdir) & mask;
+	else
+		return in_be32(&regs->e.pdir) & mask;
+}
+
+static inline void gpio32_set_in(void __iomem *base, u32 gpios, int type)
+{
+	union iop_32 __iomem *regs = base;
+
+	if (type == MPC8XX_CPM1_PORTB) {
+		clrbits_be32(&regs->b.pdat, gpios);
+		/* GPDIR register 0 -> input */
+		clrbits_be32(&regs->b.pdir, gpios);
+	} else { /* Port E */
+		clrbits_be32(&regs->e.pdat, gpios);
+		/* GPDIR register 0 -> input */
+		clrbits_be32(&regs->e.pdir, gpios);
+	}
+}
+
+static inline void gpio32_set_lo(void __iomem *base, u32 gpios, int type)
+{
+	union iop_32 __iomem *regs = base;
+
+	if (type == MPC8XX_CPM1_PORTB) {
+		clrbits_be32(&regs->b.pdat, gpios);
+		/* GPDIR register 1 -> output */
+		setbits_be32(&regs->b.pdir, gpios);
+	} else {
+		clrbits_be32(&regs->e.pdat, gpios);
+		/* GPDIR register 1 -> output */
+		setbits_be32(&regs->e.pdir, gpios);
+	}
+}
+
+static inline void gpio32_set_hi(void __iomem *base, u32 gpios, int type)
+{
+	union iop_32 __iomem *regs = base;
+
+	if (type == MPC8XX_CPM1_PORTB) {
+		setbits_be32(&regs->b.pdat, gpios);
+		/* GPDIR register 1 -> output */
+		setbits_be32(&regs->b.pdir, gpios);
+	} else {
+		setbits_be32(&regs->e.pdat, gpios);
+		/* GPDIR register 1 -> output */
+		setbits_be32(&regs->e.pdir, gpios);
+	}
+}
+
+static int mpc8xx_gpio_direction_input(struct udevice *dev, uint gpio)
+{
+	struct mpc8xx_gpio_data *data = dev_get_priv(dev);
+	int type = data->type;
+
+	if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE)
+		gpio32_set_in(data->base, gpio_mask(gpio, type), type);
+	else
+		gpio16_set_in(data->base, gpio_mask(gpio, type), type);
+
+	return 0;
+}
+
+static int mpc8xx_gpio_set_value(struct udevice *dev, uint gpio, int value)
+{
+	struct mpc8xx_gpio_data *data = dev_get_priv(dev);
+	int type = data->type;
+
+	if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE) {
+		if (value)
+			gpio32_set_hi(data->base, gpio_mask(gpio, type), type);
+		else
+			gpio32_set_lo(data->base, gpio_mask(gpio, type), type);
+	} else {
+		if (value)
+			gpio16_set_hi(data->base, gpio_mask(gpio, type), type);
+		else
+			gpio16_set_lo(data->base, gpio_mask(gpio, type), type);
+	}
+
+	return 0;
+}
+
+static int mpc8xx_gpio_direction_output(struct udevice *dev, uint gpio,
+					int value)
+{
+	return mpc8xx_gpio_set_value(dev, gpio, value);
+}
+
+static int mpc8xx_gpio_get_value(struct udevice *dev, uint gpio)
+{
+	struct mpc8xx_gpio_data *data = dev_get_priv(dev);
+	int type = data->type;
+
+	/* Input -> read value from GPDAT register */
+	if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE)
+		return gpio32_get_val(data->base, gpio_mask(gpio, type), type);
+	else
+		return gpio16_get_val(data->base, gpio_mask(gpio, type), type);
+}
+
+static int mpc8xx_gpio_get_function(struct udevice *dev, uint gpio)
+{
+	struct mpc8xx_gpio_data *data = dev_get_priv(dev);
+	int type = data->type;
+	int dir;
+
+	if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE)
+		dir = gpio32_get_dir(data->base, gpio_mask(gpio, type), type);
+	else
+		dir = gpio16_get_dir(data->base, gpio_mask(gpio, type), type);
+	return dir ? GPIOF_OUTPUT : GPIOF_INPUT;
+}
+
+static int mpc8xx_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+	struct mpc8xx_gpio_plat *plat = dev_get_plat(dev);
+	fdt_addr_t addr;
+	u32 reg[2];
+
+	dev_read_u32_array(dev, "reg", reg, 2);
+	addr = dev_translate_address(dev, reg);
+
+	plat->addr = addr;
+	plat->size = reg[1];
+	plat->ngpios = dev_read_u32_default(dev, "ngpios", 32);
+
+	return 0;
+}
+
+static int mpc8xx_gpio_platdata_to_priv(struct udevice *dev)
+{
+	struct mpc8xx_gpio_data *priv = dev_get_priv(dev);
+	struct mpc8xx_gpio_plat *plat = dev_get_plat(dev);
+	unsigned long size = plat->size;
+	int type;
+
+	if (size == 0)
+		size = 0x100;
+
+	priv->addr = plat->addr;
+	priv->base = map_sysmem(plat->addr, size);
+
+	if (!priv->base)
+		return -ENOMEM;
+
+	priv->gpio_count = plat->ngpios;
+
+	type = dev_get_driver_data(dev);
+
+	if ((type == MPC8XX_CPM1_PORTA || type == MPC8XX_CPM1_PORTC ||
+	     type == MPC8XX_CPM1_PORTD) && plat->ngpios == 32)
+		priv->gpio_count = 16;
+
+	priv->type = type;
+
+	return 0;
+}
+
+static int mpc8xx_gpio_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct mpc8xx_gpio_data *data = dev_get_priv(dev);
+	char name[32], *str;
+
+	mpc8xx_gpio_platdata_to_priv(dev);
+
+	snprintf(name, sizeof(name), "MPC@%lx_", data->addr);
+	str = strdup(name);
+
+	if (!str)
+		return -ENOMEM;
+
+	uc_priv->bank_name = str;
+	uc_priv->gpio_count = data->gpio_count;
+
+	return 0;
+}
+
+static const struct dm_gpio_ops gpio_mpc8xx_ops = {
+	.direction_input	= mpc8xx_gpio_direction_input,
+	.direction_output	= mpc8xx_gpio_direction_output,
+	.get_value		= mpc8xx_gpio_get_value,
+	.set_value		= mpc8xx_gpio_set_value,
+	.get_function		= mpc8xx_gpio_get_function,
+};
+
+static const struct udevice_id mpc8xx_gpio_ids[] = {
+	{ .compatible = "fsl,cpm1-pario-bank-a", .data = MPC8XX_CPM1_PORTA },
+	{ .compatible = "fsl,cpm1-pario-bank-b", .data = MPC8XX_CPM1_PORTB },
+	{ .compatible = "fsl,cpm1-pario-bank-c", .data = MPC8XX_CPM1_PORTC },
+	{ .compatible = "fsl,cpm1-pario-bank-d", .data = MPC8XX_CPM1_PORTD },
+	{ .compatible = "fsl,cpm1-pario-bank-e", .data = MPC8XX_CPM1_PORTE },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(gpio_mpc8xx) = {
+	.name	= "gpio_mpc8xx",
+	.id	= UCLASS_GPIO,
+	.ops	= &gpio_mpc8xx_ops,
+	.of_to_plat = mpc8xx_gpio_ofdata_to_platdata,
+	.plat_auto = sizeof(struct mpc8xx_gpio_plat),
+	.of_match = mpc8xx_gpio_ids,
+	.probe	= mpc8xx_gpio_probe,
+	.priv_auto = sizeof(struct mpc8xx_gpio_data),
+};
diff --git a/drivers/spi/mpc8xx_spi.c b/drivers/spi/mpc8xx_spi.c
index 0026ad23e3..d84d7aea88 100644
--- a/drivers/spi/mpc8xx_spi.c
+++ b/drivers/spi/mpc8xx_spi.c
@@ -24,12 +24,29 @@
 
 #include <asm/cpm_8xx.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 
 #define CPM_SPI_BASE_RX	CPM_SPI_BASE
 #define CPM_SPI_BASE_TX	(CPM_SPI_BASE + sizeof(cbd_t))
 
 #define MAX_BUFFER	0x104
 
+struct mpc8xx_priv {
+	spi_t __iomem *spi;
+	struct gpio_desc gpios[16];
+	int max_cs;
+};
+
+static int mpc8xx_spi_set_mode(struct udevice *dev, uint mod)
+{
+	return 0;
+}
+
+static int mpc8xx_spi_set_speed(struct udevice *dev, uint speed)
+{
+	return 0;
+}
+
 static int mpc8xx_spi_probe(struct udevice *dev)
 {
 	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
@@ -38,42 +55,9 @@ static int mpc8xx_spi_probe(struct udevice *dev)
 	cbd_t __iomem *tbdf, *rbdf;
 
 	/* Disable relocation */
-	out_be16(&spi->spi_rpbase, 0);
+	out_be16(&spi->spi_rpbase, 0x1d80);
 
 /* 1 */
-	/* ------------------------------------------------
-	 * Initialize Port B SPI pins -> page 34-8 MPC860UM
-	 * (we are only in Master Mode !)
-	 * ------------------------------------------------ */
-
-	/* --------------------------------------------
-	 * GPIO or per. Function
-	 * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
-	 * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
-	 * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
-	 * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
-	 * -------------------------------------------- */
-	clrsetbits_be32(&cp->cp_pbpar, 0x00000001, 0x0000000E);	/* set  bits */
-
-	/* ----------------------------------------------
-	 * In/Out or per. Function 0/1
-	 * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
-	 * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
-	 * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
-	 * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
-	 * ---------------------------------------------- */
-	setbits_be32(&cp->cp_pbdir, 0x0000000F);
-
-	/* ----------------------------------------------
-	 * open drain or active output
-	 * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
-	 * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
-	 * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
-	 * PBODR[31] = 0 [0x00000001] -> active output GPIO OUT: CS for PCUE/CCM
-	 * ---------------------------------------------- */
-
-	clrsetbits_be16(&cp->cp_pbodr, 0x00000007, 0x00000008);
-
 	/* Initialize the parameter ram.
 	 * We need to make sure many things are initialized to zero
 	 */
@@ -143,6 +127,22 @@ static int mpc8xx_spi_probe(struct udevice *dev)
 	return 0;
 }
 
+static void mpc8xx_spi_cs_activate(struct udevice *dev)
+{
+	struct mpc8xx_priv *priv = dev_get_priv(dev->parent);
+	struct dm_spi_slave_plat *platdata = dev_get_parent_plat(dev);
+
+	dm_gpio_set_value(&priv->gpios[platdata->cs], 1);
+}
+
+static void mpc8xx_spi_cs_deactivate(struct udevice *dev)
+{
+	struct mpc8xx_priv *priv = dev_get_priv(dev->parent);
+	struct dm_spi_slave_plat *platdata = dev_get_parent_plat(dev);
+
+	dm_gpio_set_value(&priv->gpios[platdata->cs], 0);
+}
+
 static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen,
 			    const void *dout, void *din, unsigned long flags)
 {
@@ -159,7 +159,8 @@ static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen,
 	rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX];
 
 	/* Set CS for device */
-	clrbits_be32(&cp->cp_pbdat, 0x0001);
+	if (flags & SPI_XFER_BEGIN)
+		mpc8xx_spi_cs_activate(dev);
 
 	/* Setting tx bd status and data length */
 	out_be32(&tbdf->cbd_bufaddr, (ulong)dout);
@@ -186,21 +187,40 @@ static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen,
 	for (tm = 0; tm < 1000; ++tm) {
 		if (in_8(&cp->cp_spie) & SPI_TXB)	/* Tx Buffer Empty */
 			break;
+
 		if ((in_be16(&tbdf->cbd_sc) & BD_SC_READY) == 0)
 			break;
 		udelay(1000);
 	}
+
 	if (tm >= 1000)
 		printf("*** spi_xfer: Time out while xferring to/from SPI!\n");
 
 	/* Clear CS for device */
-	setbits_be32(&cp->cp_pbdat, 0x0001);
+	if (flags & SPI_XFER_END)
+		mpc8xx_spi_cs_deactivate(dev);
 
-	return count;
+	return 0;
 }
 
+static int mpc8xx_spi_ofdata_to_platdata(struct udevice *dev)
+{
+	struct mpc8xx_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = gpio_request_list_by_name(dev, "gpios", priv->gpios,
+					ARRAY_SIZE(priv->gpios), GPIOD_IS_OUT);
+	if (ret < 0)
+		return ret;
+
+	priv->max_cs = ret;
+
+	return 0;
+}
 static const struct dm_spi_ops mpc8xx_spi_ops = {
 	.xfer		= mpc8xx_spi_xfer,
+	.set_speed	= mpc8xx_spi_set_speed,
+	.set_mode	= mpc8xx_spi_set_mode,
 };
 
 static const struct udevice_id mpc8xx_spi_ids[] = {
@@ -212,6 +232,8 @@ U_BOOT_DRIVER(mpc8xx_spi) = {
 	.name	= "mpc8xx_spi",
 	.id	= UCLASS_SPI,
 	.of_match = mpc8xx_spi_ids,
+	.of_to_plat = mpc8xx_spi_ofdata_to_platdata,
 	.ops	= &mpc8xx_spi_ops,
 	.probe	= mpc8xx_spi_probe,
+	.priv_auto = sizeof(struct mpc8xx_priv),
 };
diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h
deleted file mode 100644
index c6929c1b98..0000000000
--- a/include/configs/MCR3000.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010-2017 CS Systemes d'Information
- * Christophe Leroy <christophe.leroy@c-s.fr>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-
-#define CFG_EXTRA_ENV_SETTINGS					\
-	"sdram_type=SDRAM\0"						\
-	"flash_type=AM29LV160DB\0"					\
-	"loadaddr=0x400000\0"						\
-	"filename=uImage.lzma\0"					\
-	"nfsroot=/opt/ofs\0"						\
-	"dhcp_ip=ip=:::::eth0:dhcp\0"					\
-	"console_args=console=ttyCPM0,115200N8\0"			\
-	"flashboot=setenv bootargs "					\
-		"${console_args} "					\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"	\
-		"mcr3k:eth0:off;"					\
-		"${ofl_args}; "						\
-		"bootm 0x04060000 - 0x04050000\0"			\
-	"tftpboot=setenv bootargs "					\
-		"${console_args} "					\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"	\
-		"mcr3k:eth0:off "					\
-		"${ofl_args}; "						\
-		"tftp ${loadaddr} ${filename};"				\
-		"tftp 0xf00000 mcr3000.dtb;"				\
-		"bootm ${loadaddr} - 0xf00000\0"			\
-	"netboot=dhcp ${loadaddr} ${filename};"				\
-		"tftp 0xf00000 mcr3000.dtb;"				\
-		"setenv bootargs "					\
-		"root=/dev/nfs rw "					\
-		"${console_args} "					\
-		"${dhcp_ip};"						\
-		"bootm ${loadaddr} - 0xf00000\0"			\
-	"nfsboot=setenv bootargs "					\
-		"root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} "	\
-		"${console_args} "					\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"	\
-		"mcr3k:eth0:off;"					\
-		"bootm 0x04060000 - 0x04050000\0"			\
-	"dhcpboot=dhcp ${loadaddr} ${filename};"			\
-		"tftp 0xf00000 mcr3000.dtb;"				\
-		"setenv bootargs "					\
-		"${console_args} "					\
-		"${dhcp_ip} "						\
-		"${ofl_args}; "						\
-		"bootm ${loadaddr} - 0xf00000\0"
-
-/* Miscellaneous configurable options */
-
-/* Definitions for initial stack pointer and data area (in DPRAM) */
-#define CFG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_IMMR + 0x2800)
-#define	CFG_SYS_INIT_RAM_SIZE	(0x2e00 - 0x2800)
-
-/* RAM configuration (note that CFG_SYS_SDRAM_BASE must be zero) */
-#define	CFG_SYS_SDRAM_BASE		0x00000000
-
-/* FLASH organization */
-#define CFG_SYS_FLASH_BASE		CONFIG_TEXT_BASE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CFG_SYS_BOOTMAPSZ		(8 << 20)
-
-/* Environment Configuration */
-
-/* environment is in FLASH */
-
-/* Ethernet configuration part */
-
-/* NAND configuration part */
-#define CFG_SYS_NAND_BASE		0x0C000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/cmpc885.h b/include/configs/cmpc885.h
new file mode 100644
index 0000000000..4ce580cd14
--- /dev/null
+++ b/include/configs/cmpc885.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 CS Group
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Definitions for initial stack pointer and data area (in DPRAM) */
+#define CFG_SYS_INIT_RAM_ADDR		(CONFIG_SYS_IMMR + 0x2800)
+#define CFG_SYS_INIT_RAM_SIZE		(0x2e00 - 0x2800)
+
+/* RAM configuration (note that CFG_SYS_SDRAM_BASE must be zero) */
+#define CFG_SYS_SDRAM_BASE		0x00000000
+
+/* FLASH Configuration */
+#define CFG_SYS_FLASH_BASE		0x40000000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 24 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_SYS_BOOTMAPSZ		(32 << 20)
+
+/* NAND configuration part */
+#define CFG_SYS_NAND_BASE		0xC0000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mcr3000.h b/include/configs/mcr3000.h
new file mode 100644
index 0000000000..6b16b050ff
--- /dev/null
+++ b/include/configs/mcr3000.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010-2017 CS Systemes d'Information
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+
+/* Miscellaneous configurable options */
+
+/* Definitions for initial stack pointer and data area (in DPRAM) */
+#define CFG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_IMMR + 0x2800)
+#define	CFG_SYS_INIT_RAM_SIZE	(0x2e00 - 0x2800)
+
+/* RAM configuration (note that CFG_SYS_SDRAM_BASE must be zero) */
+#define	CFG_SYS_SDRAM_BASE		0x00000000
+
+/* FLASH organization */
+#define CFG_SYS_FLASH_BASE		CONFIG_TEXT_BASE
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 32 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_SYS_BOOTMAPSZ		(32 << 20)
+
+/* Environment Configuration */
+
+/* environment is in FLASH */
+
+/* Ethernet configuration part */
+
+/* NAND configuration part */
+#define CFG_SYS_NAND_BASE		0x0C000000
+
+#endif /* __CONFIG_H */
author	Tom Rini <trini@konsulko.com>	2023-02-12 23:25:09 +0300
committer	Tom Rini <trini@konsulko.com>	2023-02-12 23:25:09 +0300
commit	386e77cda8b690dbf5b2b7c828b3313205e5078c (patch)
tree	50308d557caee50e8decc77f4be5ddfdeabcc9cb
parent	0d91c88230fe8bd9f8d39ca2ab69cd6282e9f949 (diff)
parent	6a8c36b936ab69a7521ec1ecfd20f7b85f7f59c5 (diff)
download	u-boot-386e77cda8b690dbf5b2b7c828b3313205e5078c.tar.xz