ARM: dts: stm32: add cpufreq support on stm32mp15x

This commit adds cpufreq support on stm32mp15x SOC. STM32 cpufreq uses
operating points V2 bindings (no legacy). Nvmem cells have to be used to
know the chip version and then which OPPs are available. Note that STM32
cpufreq driver is mainly based on "cpufreq-dt" driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

3 files changed, 37 insertions, 0 deletions

diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 75d2c0d296..d5216a1831 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -20,6 +20,24 @@
 			clock-frequency = <650000000>;
 			device_type = "cpu";
 			reg = <0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			nvmem-cells = <&part_number_otp>;
+			nvmem-cell-names = "part_number";
+		};
+	};
+
+	cpu0_opp_table: cpu0-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-650000000 {
+			opp-hz = /bits/ 64 <650000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0x1>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1350000>;
+			opp-supported-hw = <0x2>;
 		};
 	};
 
@@ -1522,6 +1540,9 @@
 			reg = <0x5c005000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			part_number_otp: part_number_otp@4 {
+				reg = <0x4 0x1>;
+			};
 			ts_cal1: calib@5c {
 				reg = <0x5c 0x2>;
 			};
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index 186dc46754..c4c1202789 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -107,6 +107,14 @@
 	};
 };
 
+&cpu0{
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+	cpu-supply = <&vddcore>;
+};
+
 &dac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 7589c6f9dc..e7a46e7b5f 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -116,6 +116,14 @@
 	status = "okay";
 };
 
+&cpu0{
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+	cpu-supply = <&vddcore>;
+};
+
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;