powerpc: Remove configs/MPC8536DS_36BIT_defconfig board

DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

14 files changed, 0 insertions, 1492 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index a78ba2ce3d..a7672ee3f2 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -56,14 +56,6 @@ config TARGET_P5040DS
 	imply CMD_SATA
 	imply PANIC_HANG
 
-config TARGET_MPC8536DS
-	bool "Support MPC8536DS"
-	select ARCH_MPC8536
-# Use DDR3 controller with DDR2 DIMMs on this board
-	select SYS_FSL_DDRC_GEN3
-	imply CMD_SATA
-	imply FSL_SATA
-
 config TARGET_MPC8541CDS
 	bool "Support MPC8541CDS"
 	select ARCH_MPC8541
@@ -1557,7 +1549,6 @@ config SYS_FSL_LBC_CLK_DIV
 		eLBC controller).
 
 source "board/freescale/corenet_ds/Kconfig"
-source "board/freescale/mpc8536ds/Kconfig"
 source "board/freescale/mpc8541cds/Kconfig"
 source "board/freescale/mpc8544ds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
diff --git a/board/freescale/mpc8536ds/Kconfig b/board/freescale/mpc8536ds/Kconfig
deleted file mode 100644
index 1a6a9d4598..0000000000
--- a/board/freescale/mpc8536ds/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8536DS
-
-config SYS_BOARD
-	default "mpc8536ds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8536DS"
-
-endif
diff --git a/board/freescale/mpc8536ds/MAINTAINERS b/board/freescale/mpc8536ds/MAINTAINERS
deleted file mode 100644
index 5ce5164e49..0000000000
--- a/board/freescale/mpc8536ds/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-MPC8536DS BOARD
-M:	Priyanka Jain <priyanka.jain@nxp.com>
-S:	Maintained
-F:	board/freescale/mpc8536ds/
-F:	include/configs/MPC8536DS.h
-F:	configs/MPC8536DS_defconfig
-F:	configs/MPC8536DS_36BIT_defconfig
-F:	configs/MPC8536DS_SDCARD_defconfig
-F:	configs/MPC8536DS_SPIFLASH_defconfig
diff --git a/board/freescale/mpc8536ds/Makefile b/board/freescale/mpc8536ds/Makefile
deleted file mode 100644
index 6b936aa299..0000000000
--- a/board/freescale/mpc8536ds/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2008 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	+= mpc8536ds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/mpc8536ds/README b/board/freescale/mpc8536ds/README
deleted file mode 100644
index 2a38bd6dda..0000000000
--- a/board/freescale/mpc8536ds/README
+++ /dev/null
@@ -1,127 +0,0 @@
-Overview:
-=========
-
-The MPC8536E integrates a PowerPC processor core with system logic
-required for imaging, networking, and communications applications.
-
-Boot from NAND:
-===============
-
-The MPC8536E is capable of booting from NAND flash which uses the image
-u-boot-nand.bin. This image contains two parts: a first stage image(also
-call 4K NAND loader and a second stage image. The former is appended to
-the latter to produce u-boot-nand.bin.
-
-The bootup process can be divided into two stages: the first stage will
-configure the L2SRAM, then copy the second stage image to L2SRAM and jump
-to it. The second stage image is to configure all the hardware and boot up
-to U-Boot command line.
-
-The 4K NAND loader's code comes from the corresponding nand_spl directory,
-along with the code twisted by CONFIG_NAND_SPL. The macro CONFIG_NAND_SPL
-is mainly used to shrink the code size to the 4K size limitation.
-
-The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
-second stage image. It's set in the board config file when boot from NAND
-is selected.
-
-Build and boot steps
---------------------
-
-1. Building image
-	make MPC8536DS_NAND_config
-	make CROSS_COMPILE=powerpc-none-linux-gnuspe- all
-
-2. Change dip-switch
-	SW2[5-8] = 1011
-	SW9[1-3] = 101
-	Note: 1 stands for 'on', 0 stands for 'off'
-
-3. Flash image
-	tftp 1000000 u-boot-nand.bin
-	nand erase 0 a0000
-	nand write 1000000 0 a0000
-
-Boot from On-chip ROM:
-======================
-
-The MPC8536E is capable of booting from the on-chip ROM - boot from eSDHC
-and boot from eSPI. When power on, the porcessor excutes the ROM code to
-initialize the eSPI/eSDHC controller, and loads the mian U-Boot image from
-the memory device that interfaced to the controller, such as the SDCard or
-SPI EEPROM, to the target memory, e.g. SDRAM or L2SRAM, then boot from it.
-
-The memory device should contain a specific data structure with control word
-and config word at the fixed address. The config word direct the process how
-to config the memory device, and the control word direct the processor where
-to find the image on the memory device, or where copy the main image to. The
-user can use any method to store the data structure to the memory device, only
-if store it on the assigned address.
-
-Build and boot steps
---------------------
-
-For boot from eSDHC:
-1. Build image
-	make MPC8536DS_SDCARD_config
-	make CROSS_COMPILE=powerpc-none-linux-gnuspe- all
-
-2. Change dip-switch
-	SW2[5-8] = 0111
-	SW3[1]   = 0
-	SW8[7]   = 0 - The on-board SD/MMC slot is active
-	SW8[7]   = 1 - The externel SD/MMC slot is active
-
-3. Put image to SDCard
-	Put the follwing info at the assigned address on the SDCard:
-
-	   Offset   |   Data     | Description
-	--------------------------------------------------------
-	| 0x40-0x43 | 0x424F4F54 | BOOT signature              |
-	--------------------------------------------------------
-	| 0x48-0x4B | 0x00080000 | u-boot.bin's size           |
-	--------------------------------------------------------
-	| 0x50-0x53 | 0x???????? | u-boot.bin's Addr on SDCard |
-	--------------------------------------------------------
-	| 0x58-0x5B | 0xF8F80000 | Target Address              |
-	-------------------------------------------------------
-	| 0x60-0x63 | 0xF8FFF000 | Execution Starting Address  |
-	--------------------------------------------------------
-	| 0x68-0x6B | 0x6        | Number of Config Addr/Data  |
-	--------------------------------------------------------
-	| 0x80-0x83 | 0xFF720100 | Config Addr 1               |
-	| 0x84-0x87 | 0xF8F80000 | Config Data 1               |
-	--------------------------------------------------------
-	| 0x88-0x8b | 0xFF720e44 | Config Addr 2               |
-	| 0x8c-0x8f | 0x0000000C | Config Data 2               |
-	--------------------------------------------------------
-	| 0x90-0x93 | 0xFF720000 | Config Addr 3               |
-	| 0x94-0x97 | 0x80010000 | Config Data 3               |
-	--------------------------------------------------------
-	| 0x98-0x9b | 0xFF72e40c | Config Addr 4               |
-	| 0x9c-0x9f | 0x00000040 | Config Data 4               |
-	--------------------------------------------------------
-	| 0xa0-0xa3 | 0x40000001 | Config Addr 5               |
-	| 0xa4-0xa7 | 0x00000100 | Config Data 5               |
-	--------------------------------------------------------
-	| 0xa8-0xab | 0x80000001 | Config Addr 6               |
-	| 0xac-0xaf | 0x80000001 | Config Data 6               |
-	--------------------------------------------------------
-	|              ......                                  |
-	--------------------------------------------------------
-	| 0x???????? | u-boot.bin                              |
-	--------------------------------------------------------
-
-	then insert the SDCard to the active slot to boot up.
-
-For boot from eSPI:
-1. Build image
-	make MPC8536DS_SPIFLASH_config
-	make CROSS_COMPILE=powerpc-none-linux-gnuspe- all
-
-2. Change dip-switch
-	SW2[5-8] = 0110
-
-3. Put image to SPI flash
-	Put the info in the above table onto the SPI flash, then
-	boot up.
diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c
deleted file mode 100644
index 8319ae8245..0000000000
--- a/board/freescale/mpc8536ds/ddr.c
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
-
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-
-	/*
-	 * For wake up arp feature, we need enable auto self refresh
-	 */
-	popts->auto_self_refresh_en = 1;
-	popts->sr_it = 0x6;
-}
diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c
deleted file mode 100644
index d59b12d82c..0000000000
--- a/board/freescale/mpc8536ds/law.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
deleted file mode 100644
index 5907a7b428..0000000000
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ /dev/null
@@ -1,293 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <log.h>
-#include <net.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <spd.h>
-#include <miiphy.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <spd_sdram.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <netdev.h>
-#include <sata.h>
-
-#include "../common/sgmii_riser.h"
-
-int board_early_init_f (void)
-{
-#ifdef CONFIG_MMC
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	setbits_be32(&gur->pmuxcr,
-			(MPC85xx_PMUXCR_SDHC_CD |
-			 MPC85xx_PMUXCR_SDHC_WP));
-
-	/* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118,
-	 * however, this erratum only applies to MPC8536 Rev1.0.
-	 * So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/
-	if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) &&
-			(SVR_MIN(get_svr()) >= 0x1))
-			|| (SVR_MAJ(get_svr() & 0x7) > 0x1))
-		setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV);
-#endif
-	return 0;
-}
-
-int checkboard (void)
-{
-	u8 vboot;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	printf("Board: MPC8536DS Sys ID: 0x%02x, "
-		"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
-		in_8(pixis_base + PIXIS_PVER));
-
-	vboot = in_8(pixis_base + PIXIS_VBOOT);
-	switch ((vboot & PIXIS_VBOOT_LBMAP) >> 5) {
-		case PIXIS_VBOOT_LBMAP_NOR0:
-			puts ("vBank: 0\n");
-			break;
-		case PIXIS_VBOOT_LBMAP_NOR1:
-			puts ("vBank: 1\n");
-			break;
-		case PIXIS_VBOOT_LBMAP_NOR2:
-			puts ("vBank: 2\n");
-			break;
-		case PIXIS_VBOOT_LBMAP_NOR3:
-			puts ("vBank: 3\n");
-			break;
-		case PIXIS_VBOOT_LBMAP_PJET:
-			puts ("Promjet\n");
-			break;
-		case PIXIS_VBOOT_LBMAP_NAND:
-			puts ("NAND\n");
-			break;
-	}
-
-	return 0;
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram (void)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	struct ccsr_ddr __iomem *ddr = &immap->im_ddr;
-	uint d_init;
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
-
-#if defined (CONFIG_DDR_ECC)
-	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
-	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
-	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
-#endif
-	asm("sync;isync");
-
-	udelay(500);
-
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-
-#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	d_init = 1;
-	debug("DDR - 1st controller: memory initializing\n");
-	/*
-	 * Poll until memory is initialized.
-	 * 512 Meg at 400 might hit this 200 times or so.
-	 */
-	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
-		udelay(1000);
-	}
-	debug("DDR: memory initialized\n\n");
-	asm("sync; isync");
-	udelay(500);
-#endif
-
-	return 512 * 1024 * 1024;
-}
-
-#endif
-
-#ifdef CONFIG_PCI1
-static struct pci_controller pci1_hose;
-#endif
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	struct fsl_pci_info pci_info;
-	u32 devdisr, pordevsr;
-	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
-	int first_free_busno;
-
-	first_free_busno = fsl_pcie_init_board(0);
-
-#ifdef CONFIG_PCI1
-	devdisr = in_be32(&gur->devdisr);
-	pordevsr = in_be32(&gur->pordevsr);
-	porpllsr = in_be32(&gur->porpllsr);
-
-	pci_speed = 66666000;
-	pci_32 = 1;
-	pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
-	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
-
-	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-		SET_STD_PCI_INFO(pci_info, 1);
-		set_next_law(pci_info.mem_phys,
-			law_size_bits(pci_info.mem_size), pci_info.law);
-		set_next_law(pci_info.io_phys,
-			law_size_bits(pci_info.io_size), pci_info.law);
-
-		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
-		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
-			(pci_32) ? 32 : 64,
-			(pci_speed == 33333000) ? "33" :
-			(pci_speed == 66666000) ? "66" : "unknown",
-			pci_clk_sel ? "sync" : "async",
-			pci_agent ? "agent" : "host",
-			pci_arb ? "arbiter" : "external-arbiter",
-			pci_info.regs);
-
-		first_free_busno = fsl_pci_init_port(&pci_info,
-					&pci1_hose, first_free_busno);
-	} else {
-		printf("PCI: disabled\n");
-	}
-
-	puts("\n");
-#else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
-#endif
-}
-#endif
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 1;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash + promjet */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,	/* tlb, epn, rpn */
-		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,	/* perms, wimge */
-		0, flash_esel, BOOKE_PAGESZ_256M, 1);	/* ts, esel, tsize, iprot */
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_TSEC_ENET
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[2];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	if (is_serdes_configured(SGMII_TSEC1)) {
-		puts("eTSEC1 is in sgmii mode.\n");
-		tsec_info[num].phyaddr = 0;
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.\n");
-		tsec_info[num].phyaddr = 1;
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	if (is_serdes_configured(SGMII_TSEC1) ||
-	    is_serdes_configured(SGMII_TSEC3)) {
-		fsl_sgmii_riser_init(tsec_info, num);
-	}
-#endif
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-#endif
-	return pci_eth_init(bis);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	FT_FSL_PCI_SETUP;
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	fsl_sgmii_riser_fdt_fixup(blob);
-#endif
-
-#ifdef CONFIG_HAS_FSL_MPH_USB
-	fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/mpc8536ds/tlb.c b/board/freescale/mpc8536ds/tlb.c
deleted file mode 100644
index 5df4788e0a..0000000000
--- a/board/freescale/mpc8536ds/tlb.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_1M, 1),
-
-	/* W**G* - Flash/promjet, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_VIRT, CONFIG_SYS_PCI1_IO_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_256K, 1),
-
-	/* *I*G - NAND */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_1M, 1),
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
-	/* *I*G - L2SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256K, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_256K, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig
deleted file mode 100644
index e60890e2d0..0000000000
--- a/configs/MPC8536DS_36BIT_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_MPC8536DS=y
-CONFIG_PHYS_64BIT=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_SYS_FSL_DDR2=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8536DS_SDCARD_defconfig b/configs/MPC8536DS_SDCARD_defconfig
deleted file mode 100644
index 9f653661f4..0000000000
--- a/configs/MPC8536DS_SDCARD_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xf8f40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_MPC8536DS=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_FSL_DDR2=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8536DS_SPIFLASH_defconfig b/configs/MPC8536DS_SPIFLASH_defconfig
deleted file mode 100644
index 866d719564..0000000000
--- a/configs/MPC8536DS_SPIFLASH_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xf8f40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xF0000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_MPC8536DS=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_FSL_DDR2=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig
deleted file mode 100644
index 9366e7a757..0000000000
--- a/configs/MPC8536DS_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_MPC8536DS=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_SYS_FSL_DDR2=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
deleted file mode 100644
index 340574a985..0000000000
--- a/include/configs/MPC8536DS.h
+++ /dev/null
@@ -1,642 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
- */
-
-/*
- * mpc8536ds board configuration file
- *
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#include "../board/freescale/common/ics307_clk.h"
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD		1
-#define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH		1
-#define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
-#endif
-
-#ifndef	CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#define CONFIG_PCI1		1	/* Enable PCI controller 1 */
-#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
-#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
-#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
-#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
-#define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* toggle branch predition */
-
-#define CONFIG_ENABLE_36BIT_PHYS	1
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP			1
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-#endif
-
-/*
- * Config the L2 Cache as L2 SRAM
- */
-#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	0xff8f80000ull
-#else
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#endif
-#define CONFIG_SYS_L2_SIZE		(512 << 10)
-#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-
-#define CONFIG_SYS_CCSRBAR		0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-#if defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* DDR Setup */
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
-#define CONFIG_DDR_SPD
-
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
-#define CONFIG_SYS_SPD_BUS_NUM		1
-
-/* These are used when DDR doesn't use SPD. */
-#define CONFIG_SYS_SDRAM_SIZE		256	/* DDR is 256MB */
-#define CONFIG_SYS_DDR_CS0_BNDS	0x0000001F
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80010102 /* Enable, no interleaving */
-#define CONFIG_SYS_DDR_TIMING_3	0x00000000
-#define CONFIG_SYS_DDR_TIMING_0	0x00260802
-#define CONFIG_SYS_DDR_TIMING_1	0x3935d322
-#define CONFIG_SYS_DDR_TIMING_2	0x14904cc8
-#define CONFIG_SYS_DDR_MODE_1		0x00480432
-#define CONFIG_SYS_DDR_MODE_2		0x00000000
-#define CONFIG_SYS_DDR_INTERVAL	0x06180100
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
-#define CONFIG_SYS_DDR_OCD_CTRL	0x00000000
-#define CONFIG_SYS_DDR_OCD_STATUS	0x00000000
-#define CONFIG_SYS_DDR_CONTROL	0xC3008000	/* Type = DDR2 */
-#define CONFIG_SYS_DDR_CONTROL2	0x04400010
-
-#define CONFIG_SYS_DDR_ERR_INT_EN	0x0000000d
-#define CONFIG_SYS_DDR_ERR_DIS		0x00000000
-#define CONFIG_SYS_DDR_SBE		0x00010000
-
-/* Make sure required options are set */
-#ifndef CONFIG_SPD_EEPROM
-#error ("CONFIG_SPD_EEPROM is required")
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-/*
- * Memory map -- xxx -this is wrong, needs updating
- *
- * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
- * 0x8000_0000	0xbfff_ffff	PCI Express Mem		1G non-cacheable
- * 0xc000_0000	0xdfff_ffff	PCI			512M non-cacheable
- * 0xe100_0000	0xe3ff_ffff	PCI IO range		4M non-cacheable
- *
- * Localbus cacheable (TBD)
- * 0xXXXX_XXXX	0xXXXX_XXXX	SRAM			YZ M Cacheable
- *
- * Localbus non-cacheable
- * 0xe000_0000	0xe7ff_ffff	Promjet/free		128M non-cacheable
- * 0xe800_0000	0xefff_ffff	FLASH			128M non-cacheable
- * 0xffa0_0000	0xffaf_ffff	NAND			1M non-cacheable
- * 0xffdf_0000	0xffdf_7fff	PIXIS			32K non-cacheable TLB0
- * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
- * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
-#else
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-#endif
-
-#define CONFIG_FLASH_BR_PRELIM \
-	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
-#define CONFIG_FLASH_OR_PRELIM	0xf8000ff7
-
-#define CONFIG_SYS_BR1_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
-		 | BR_PS_16 | BR_V)
-#define CONFIG_SYS_OR1_PRELIM	0xf8000ff7
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
-				      CONFIG_SYS_FLASH_BASE_PHYS }
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
-
-#define CONFIG_HWCONFIG			/* enable hwconfig */
-#define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
-#define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
-#ifdef CONFIG_PHYS_64BIT
-#define PIXIS_BASE_PHYS	0xfffdf0000ull
-#else
-#define PIXIS_BASE_PHYS	PIXIS_BASE
-#endif
-
-#define CONFIG_SYS_BR3_PRELIM	(BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR3_PRELIM	0xffffeff7	/* 32KB but only 4k mapped */
-
-#define PIXIS_ID		0x0	/* Board ID at offset 0 */
-#define PIXIS_VER		0x1	/* Board version at offset 1 */
-#define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
-#define PIXIS_CSR   		0x3	/* PIXIS General control/status register */
-#define PIXIS_RST		0x4	/* PIXIS Reset Control register */
-#define PIXIS_PWR		0x5	/* PIXIS Power status register */
-#define PIXIS_AUX		0x6	/* Auxiliary 1 register */
-#define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
-#define PIXIS_AUX2		0x8	/* Auxiliary 2 register */
-#define PIXIS_VCTL		0x10	/* VELA Control Register */
-#define PIXIS_VSTAT		0x11	/* VELA Status Register */
-#define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
-#define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
-#define PIXIS_VCORE0	 	0x14	/* VELA VCORE0 Register */
-#define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
-#define PIXIS_VBOOT_LBMAP	0xe0	/* VBOOT - CFG_LBMAP */
-#define PIXIS_VBOOT_LBMAP_NOR0	0x00	/* cfg_lbmap - boot from NOR 0 */
-#define PIXIS_VBOOT_LBMAP_NOR1	0x01	/* cfg_lbmap - boot from NOR 1 */
-#define PIXIS_VBOOT_LBMAP_NOR2	0x02	/* cfg_lbmap - boot from NOR 2 */
-#define PIXIS_VBOOT_LBMAP_NOR3	0x03	/* cfg_lbmap - boot from NOR 3 */
-#define PIXIS_VBOOT_LBMAP_PJET	0x04	/* cfg_lbmap - boot from projet */
-#define PIXIS_VBOOT_LBMAP_NAND	0x05	/* cfg_lbmap - boot from NAND */
-#define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
-#define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
-#define PIXIS_VSPEED2		0x19	/* VELA VSpeed 2 */
-#define PIXIS_VSYSCLK0		0x1A	/* VELA SYSCLK0 Register */
-#define PIXIS_VSYSCLK1		0x1B	/* VELA SYSCLK1 Register */
-#define PIXIS_VSYSCLK2		0x1C	/* VELA SYSCLK2 Register */
-#define PIXIS_VDDRCLK0		0x1D	/* VELA DDRCLK0 Register */
-#define PIXIS_VDDRCLK1		0x1E	/* VELA DDRCLK1 Register */
-#define PIXIS_VDDRCLK2		0x1F	/* VELA DDRCLK2 Register */
-#define PIXIS_VWATCH		0x24    /* Watchdog Register */
-#define PIXIS_LED		0x25    /* LED Register */
-
-#define PIXIS_SPD_SYSCLK	0x7	/* SYSCLK option */
-
-/* old pixis referenced names */
-#define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
-#define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
-#define CONFIG_SYS_PIXIS_VBOOT_MASK	0x4e
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000	/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
-		(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)	/* Reserved for malloc */
-
-#ifndef CONFIG_NAND_SPL
-#define CONFIG_SYS_NAND_BASE		0xffa00000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS	0xfffa00000ull
-#else
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
-#endif
-#else
-#define CONFIG_SYS_NAND_BASE		0xfff00000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS	0xffff00000ull
-#else
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
-#endif
-#endif
-#define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
-				CONFIG_SYS_NAND_BASE + 0x40000, \
-				CONFIG_SYS_NAND_BASE + 0x80000, \
-				CONFIG_SYS_NAND_BASE + 0xC0000}
-#define CONFIG_SYS_MAX_NAND_DEVICE	4
-#define CONFIG_NAND_FSL_ELBC	1
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-
-/* NAND boot: 4K NAND loader config */
-#define CONFIG_SYS_NAND_SPL_SIZE	0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((768 << 10) - 0x2000)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
-#define CONFIG_SYS_NAND_U_BOOT_START \
-		(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
-#define CONFIG_SYS_NAND_U_BOOT_RELOC	(CONFIG_SYS_INIT_L2_END - 0x2000)
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
-
-/* NAND flash config */
-#define CONFIG_SYS_NAND_BR_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-		| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
-		| BR_PS_8		/* Port Size = 8 bit */ \
-		| BR_MS_FCM		/* MSEL = FCM */ \
-		| BR_V)			/* valid */
-#define CONFIG_SYS_NAND_OR_PRELIM	(0xFFFC0000	/* length 256K */ \
-		| OR_FCM_PGS		/* Large Page*/ \
-		| OR_FCM_CSCT \
-		| OR_FCM_CST \
-		| OR_FCM_CHT \
-		| OR_FCM_SCY_1 \
-		| OR_FCM_TRLX \
-		| OR_FCM_EHTR)
-
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-
-#define CONFIG_SYS_BR4_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
-		| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
-		| BR_PS_8		/* Port Size = 8 bit */ \
-		| BR_MS_FCM		/* MSEL = FCM */ \
-		| BR_V)			/* valid */
-#define CONFIG_SYS_OR4_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
-		| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
-		| BR_PS_8		/* Port Size = 8 bit */ \
-		| BR_MS_FCM		/* MSEL = FCM */ \
-		| BR_V)			/* valid */
-#define CONFIG_SYS_OR5_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-
-#define CONFIG_SYS_BR6_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
-		| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
-		| BR_PS_8		/* Port Size = 8 bit */ \
-		| BR_MS_FCM		/* MSEL = FCM */ \
-		| BR_V)			/* valid */
-#define CONFIG_SYS_OR6_PRELIM	CONFIG_SYS_NAND_OR_PRELIM	/* NAND Options */
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-
-/*
- * I2C2 EEPROM
- */
-#define CONFIG_ID_EEPROM
-#ifdef CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_EEPROM_BUS_NUM	1
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_MEM_BUS		0xf0000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	0xc00000000ull
-#else
-#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
-#endif
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_VIRT		0xffc00000
-#define CONFIG_SYS_PCI1_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_IO_PHYS		0xfffc00000ull
-#else
-#define CONFIG_SYS_PCI1_IO_PHYS		0xffc00000
-#endif
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00010000	/* 64k */
-
-/* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"Slot 1"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x90000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xf8000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc10000000ull
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x90000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x90000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x08000000	/* 128M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc10000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc10000ull
-#else
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc10000
-#endif
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-
-/* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_NAME		"Slot 2"
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0x98000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xf8000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc18000000ull
-#else
-#define CONFIG_SYS_PCIE2_MEM_BUS	0x98000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0x98000000
-#endif
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x08000000	/* 128M */
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc20000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc20000ull
-#else
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc20000
-#endif
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-
-/* controller 3, direct to uli, tgtid 3, Base address 8000 */
-#define CONFIG_SYS_PCIE3_NAME		"Slot 3"
-#define CONFIG_SYS_PCIE3_MEM_VIRT	0xa0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc20000000ull
-#else
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0xa0000000
-#endif
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE3_IO_VIRT	0xffc30000
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xfffc30000ull
-#else
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xffc30000
-#endif
-#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
-
-#if defined(CONFIG_PCI)
-/*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE3_IO_VIRT
-
-/*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_VIRT*/
-
-/* video */
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_BIOSEMU
-#define CONFIG_ATI_RADEON_FB
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
-#endif
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
-	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS
-	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#endif	/* CONFIG_PCI */
-
-/* SATA */
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
-
-#ifdef CONFIG_FSL_SATA
-#define CONFIG_LBA48
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC3	1
-#define CONFIG_TSEC3_NAME	"eTSEC3"
-
-#define CONFIG_FSL_SGMII_RISER	1
-#define SGMII_RISER_PHY_OFFSET	0x1c
-
-#define TSEC1_PHY_ADDR		1	/* TSEC1 -> PHY1 */
-#define TSEC3_PHY_ADDR		0	/* TSEC3 -> PHY0 */
-
-#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX		0
-#define TSEC3_PHYIDX		0
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-
-#if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_SPIFLASH)
-#elif defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_SYS_MMC_ENV_DEV  0
-#endif
-#endif
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_MPH_USB
-#ifdef CONFIG_HAS_FSL_MPH_USB
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#endif
-
-#define CONFIG_IPADDR		192.168.1.254
-
-#define CONFIG_HOSTNAME		"unknown"
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
-
-#define CONFIG_SERVERIP		192.168.1.1
-#define CONFIG_GATEWAYIP	192.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-"netdev=eth0\0"						\
-"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
-"tftpflash=tftpboot $loadaddr $uboot; "			\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
-		" +$filesize; "	\
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
-		" +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-		" $filesize; "	\
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
-		" +$filesize; "	\
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-		" $filesize\0"	\
-"consoledev=ttyS0\0"				\
-"ramdiskaddr=2000000\0"			\
-"ramdiskfile=8536ds/ramdisk.uboot\0"		\
-"fdtaddr=1e00000\0"				\
-"fdtfile=8536ds/mpc8536ds.dtb\0"		\
-"bdev=sda3\0"					\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
-
-#define CONFIG_HDBOOT				\
- "setenv bootargs root=/dev/$bdev rw "		\
- "console=$consoledev,$baudrate $othbootargs;"	\
- "tftp $loadaddr $bootfile;"			\
- "tftp $fdtaddr $fdtfile;"			\
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND		\
- "setenv bootargs root=/dev/nfs rw "	\
- "nfsroot=$serverip:$rootpath "		\
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;"	\
- "tftp $loadaddr $bootfile;"		\
- "tftp $fdtaddr $fdtfile;"		\
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND		\
- "setenv bootargs root=/dev/ram rw "	\
- "console=$consoledev,$baudrate $othbootargs;"	\
- "tftp $ramdiskaddr $ramdiskfile;"	\
- "tftp $loadaddr $bootfile;"		\
- "tftp $fdtaddr $fdtfile;"		\
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT
-
-#endif	/* __CONFIG_H */