arm: dts: rockchip: sync rk3066/rk3188 DT files from linux-next v6.2-rc4

Sync rk3066/rk3188 DT files from Linux.
This is the state as of linux-next v6.2-rc4.
New nfc node for MK808 rk3066a.
CRU nodes now have a clock property.
To prefend dtoc errors a fixed clock must also be
included for tpl/spl in the rk3xxx-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

6 files changed, 68 insertions, 26 deletions

diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts
index 667d57a4ff..06790f05b3 100644
--- a/arch/arm/dts/rk3066a-mk808.dts
+++ b/arch/arm/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
@@ -157,7 +157,32 @@
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&nfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "rk-nand";
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <40>;
+		nand-is-boot-medium;
+		rockchip,boot-blks = <8>;
+		rockchip,boot-ecc-strength = <24>;
+	};
 };
 
 &pinctrl {
diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi
index c25b9695db..de9915d946 100644
--- a/arch/arm/dts/rk3066a.dtsi
+++ b/arch/arm/dts/rk3066a.dtsi
@@ -202,8 +202,9 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3066a-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index e7138a4ae0..118deacd38 100644
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -6,7 +6,6 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include "rk3188.dtsi"
-#include "rk3188-radxarock-u-boot.dtsi"
 
 / {
 	model = "Radxa Rock";
@@ -25,7 +24,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -72,7 +71,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -127,18 +126,21 @@
 };
 
 &emac {
-	status = "okay";
-
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
index 9a80f83a1a..44b54af0bb 100644
--- a/arch/arm/dts/rk3188.dtsi
+++ b/arch/arm/dts/rk3188.dtsi
@@ -54,7 +54,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -195,8 +195,9 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3188-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -223,7 +224,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@2000a000 {
+		gpio0: gpio@2000a000 {
 			compatible = "rockchip,rk3188-gpio-bank0";
 			reg = <0x2000a000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +237,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@2003c000 {
+		gpio1: gpio@2003c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003c000 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +250,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@2003e000 {
+		gpio2: gpio@2003e000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003e000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +263,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3@20080000 {
+		gpio3: gpio@20080000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20080000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -275,15 +276,15 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_up: pcfg_pull_up {
+		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
 
-		pcfg_pull_down: pcfg_pull_down {
+		pcfg_pull_down: pcfg-pull-down {
 			bias-pull-down;
 		};
 
-		pcfg_pull_none: pcfg_pull_none {
+		pcfg_pull_none: pcfg-pull-none {
 			bias-disable;
 		};
 
@@ -378,7 +379,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -606,7 +607,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
@@ -641,6 +641,11 @@
 &grf {
 	compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3188-io-voltage-domain";
+		status = "disabled";
+	};
+
 	usbphy: usbphy {
 		compatible = "rockchip,rk3188-usb-phy";
 		#address-cells = <1>;
diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi
index f50bacdb84..6af6a451ea 100644
--- a/arch/arm/dts/rk3xxx-u-boot.dtsi
+++ b/arch/arm/dts/rk3xxx-u-boot.dtsi
@@ -33,3 +33,7 @@
 &uart2 {
 	clock-frequency = <24000000>;
 };
+
+&xin24m {
+	bootph-all;
+};
diff --git a/arch/arm/dts/rk3xxx.dtsi b/arch/arm/dts/rk3xxx.dtsi
index 616a828e0c..cb4e42ede5 100644
--- a/arch/arm/dts/rk3xxx.dtsi
+++ b/arch/arm/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
@@ -186,8 +193,6 @@
 		compatible = "snps,arc-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		rockchip,grf = <&grf>;