diff options
author | Markus Klotzbuecher <mk@denx.de> | 2006-07-12 11:08:36 +0400 |
---|---|---|
committer | Markus Klotzbuecher <mk@pollux.denx.de> | 2006-07-12 11:08:36 +0400 |
commit | d6cc73e4e70a7f8712c52ef9d93a19a906cc3d4b (patch) | |
tree | 0beb25e5ab6aeeae10b81b19152bbdcb6aee8151 | |
parent | b02d0177c1ef5be98576dade8f1cd0aed063bae5 (diff) | |
download | u-boot-d6cc73e4e70a7f8712c52ef9d93a19a906cc3d4b.tar.xz |
Bugfix in FEC initialisation:
All MII configuration is done via FEC1 registers. But MII_SPEED was
configured according to FEC used. So if only FEC2 was used, this caused
the real MII_SPEED register in FEC1 to stay uninitalised, what lead
to "mii_send STUCK!" messages. Fix: always configure MII_SPEED on FEC1
only.
-rw-r--r-- | cpu/mpc8xx/fec.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c index 21c9070d21..9ebee592d8 100644 --- a/cpu/mpc8xx/fec.c +++ b/cpu/mpc8xx/fec.c @@ -396,8 +396,10 @@ static void fec_pin_init(int fecidx) * * to 2.5 MHz. * * This MDC frequency is equal to system clock / (2 * MII_SPEED). * * Then MII_SPEED = system_clock / 2 * 2,5 Mhz. + * + * All MII configuration is done via FEC1 registers: */ - fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; + immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; #if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) /* our PHYs are the limit at 2.5 MHz */ |