diff options
author | Tom Rini <trini@konsulko.com> | 2022-09-26 18:27:30 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2022-09-26 18:27:30 +0300 |
commit | ffa2c88bcf8618b6d6fb71f5263beede9a179b20 (patch) | |
tree | 750fa5677f89e5b7b48d1510cba9978a2b13b15e | |
parent | 9114b7cee817789ad59e0fb6d5cd57f50668b4e1 (diff) | |
parent | 3c1ec13317292933fd01d9c60aae3ff1d5bc171e (diff) | |
download | u-boot-ffa2c88bcf8618b6d6fb71f5263beede9a179b20.tar.xz |
Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscv into next
27 files changed, 217 insertions, 1287 deletions
diff --git a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi index 11c773bb70..dc99e7b9ac 100644 --- a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi @@ -129,6 +129,57 @@ phy-reset-post-delay = <1>; }; +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + phy-handle = <&sw_phy0>; + }; + + lan2: port@1 { + phy-handle = <&sw_phy1>; + }; + + lan3: port@2 { + phy-handle = <&sw_phy2>; + }; + + lan4: port@3 { + phy-handle = <&sw_phy3>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0>; + compatible = "microchip,ksz-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + }; +}; + &pinctrl_fec1 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi index 920246d577..caf5d3a7f6 100644 --- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi @@ -162,6 +162,65 @@ u-boot,dm-spl; }; +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + phy-handle = <&sw_phy0>; + }; + + lan2: port@1 { + phy-handle = <&sw_phy1>; + }; + + lan3: port@2 { + phy-handle = <&sw_phy2>; + }; + + lan4: port@3 { + phy-handle = <&sw_phy3>; + }; + + lan5: port@4 { + phy-handle = <&sw_phy4>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0>; + compatible = "microchip,ksz-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + }; +}; + &usdhc2 { assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>; assigned-clock-rates = <400000000>; diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index ff3b9ddd9f..29d5baaab8 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -27,6 +27,7 @@ #define IOMUXC_GPR_BASE_ADDR 0x30340000 #define OCOTP_BASE_ADDR 0x30350000 #define ANATOP_BASE_ADDR 0x30360000 +#define SNVS_BASE_ADDR 0x30370000 #define CCM_BASE_ADDR 0x30380000 #define SRC_BASE_ADDR 0x30390000 #define GPC_BASE_ADDR 0x303A0000 @@ -113,6 +114,10 @@ #define SRC_DDR1_RCR_CORE_RESET_N_MASK BIT(1) #define SRC_DDR1_RCR_PRESET_N_MASK BIT(0) +#define SNVS_LPSR 0x4c +#define SNVS_LPLVDR 0x64 +#define SNVS_LPPGDR_INIT 0x41736166 + struct iomuxc_gpr_base_regs { u32 gpr[47]; }; diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 47c0a4f5c4..a4863281e3 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -544,6 +544,16 @@ static int imx8m_check_clock(void *ctx, struct event *event) } EVENT_SPY(EVT_DM_POST_INIT, imx8m_check_clock); +static void imx8m_setup_snvs(void) +{ + /* Enable SNVS clock */ + clock_enable(CCGR_SNVS, 1); + /* Initialize glitch detect */ + writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR); + /* Clear interrupt status */ + writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR); +} + int arch_cpu_init(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -594,6 +604,8 @@ int arch_cpu_init(void) writel(0x200, &ocotp->ctrl_clr); } + imx8m_setup_snvs(); + return 0; } diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 78e964db12..32a90b83b5 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -269,6 +269,20 @@ config XIP from a NOR flash memory without copying the code to ram. Say yes here if U-Boot boots from flash directly. +config SPL_XIP + bool "Enable XIP mode for SPL" + help + If SPL starts in read-only memory (XIP for example) then we shouldn't + rely on lock variables (for example hart_lottery and available_harts_lock), + this affects only SPL, other stages should proceed as non-XIP. + +config AVAILABLE_HARTS + bool "Send IPI by available harts" + default y + help + By default, IPI sending mechanism will depend on available_harts. + If disable this, it will send IPI by CPUs node numbers of device tree. + config SHOW_REGS bool "Show registers on unhandled exception" diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c index 3ffcbbd23f..52ab02519f 100644 --- a/arch/riscv/cpu/cpu.c +++ b/arch/riscv/cpu/cpu.c @@ -19,15 +19,17 @@ * The variables here must be stored in the data section since they are used * before the bss section is available. */ -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) u32 hart_lottery __section(".data") = 0; +#ifdef CONFIG_AVAILABLE_HARTS /* * The main hart running U-Boot has acquired available_harts_lock until it has * finished initialization of global data. */ u32 available_harts_lock = 1; #endif +#endif static inline bool supports_extension(char ext) { diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index b7f21ab63e..4687bca3c9 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -122,7 +122,7 @@ call_board_init_f_0: call_harts_early_init: jal harts_early_init -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) /* * Pick hart to initialize global data and run U-Boot. The other harts * wait for initialization to complete. @@ -152,22 +152,24 @@ call_harts_early_init: /* save the boot hart id to global_data */ SREG tp, GD_BOOT_HART(gp) -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS la t0, available_harts_lock amoswap.w.rl zero, zero, 0(t0) +#endif wait_for_gd_init: - la t0, available_harts_lock - li t1, 1 -1: amoswap.w.aq t1, t1, 0(t0) - bnez t1, 1b - /* * Set the global data pointer only when gd_t has been initialized. * This was already set by arch_setup_gd on the boot hart, but all other * harts' global data pointers gets set here. */ mv gp, s0 +#ifdef CONFIG_AVAILABLE_HARTS + la t0, available_harts_lock + li t1, 1 +1: amoswap.w.aq t1, t1, 0(t0) + bnez t1, 1b /* register available harts in the available_harts mask */ li t1, 1 @@ -177,6 +179,7 @@ wait_for_gd_init: SREG t2, GD_AVAILABLE_HARTS(gp) amoswap.w.rl zero, zero, 0(t0) +#endif /* * Continue on hart lottery winner, others branch to diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h index 095484a635..858594a191 100644 --- a/arch/riscv/include/asm/global_data.h +++ b/arch/riscv/include/asm/global_data.h @@ -27,9 +27,11 @@ struct arch_global_data { #if CONFIG_IS_ENABLED(SMP) struct ipi_data ipi[CONFIG_NR_CPUS]; #endif -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS ulong available_harts; #endif +#endif }; #include <asm-generic/global_data.h> diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c index f1fe089b3d..452dfcea97 100644 --- a/arch/riscv/lib/asm-offsets.c +++ b/arch/riscv/lib/asm-offsets.c @@ -16,9 +16,11 @@ int main(void) { DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr)); -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts)); #endif +#endif return 0; } diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c index ba992100ad..c0f65af191 100644 --- a/arch/riscv/lib/smp.c +++ b/arch/riscv/lib/smp.c @@ -45,11 +45,13 @@ static int send_ipi_many(struct ipi_data *ipi, int wait) continue; } -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS /* skip if hart is not available */ if (!(gd->arch.available_harts & (1 << reg))) continue; #endif +#endif gd->arch.ipi[reg].addr = ipi->addr; gd->arch.ipi[reg].arg0 = ipi->arg0; diff --git a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c index 6dc4e6a9a2..dc0883002c 100644 --- a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c +++ b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c @@ -34,22 +34,6 @@ int board_phys_sdram_size(phys_size_t *size) return 0; } -/* IMX8M SNVS registers needed for the bootcount functionality */ -#define SNVS_BASE_ADDR 0x30370000 -#define SNVS_LPSR 0x4c -#define SNVS_LPLVDR 0x64 -#define SNVS_LPPGDR_INIT 0x41736166 - -static void setup_snvs(void) -{ - /* Enable SNVS clock */ - clock_enable(CCGR_SNVS, 1); - /* Initialize glitch detect */ - writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR); - /* Clear interrupt status */ - writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR); -} - static void setup_mac_address(void) { unsigned char enetaddr[6]; @@ -99,7 +83,6 @@ static void setup_boot_device(void) int board_init(void) { - setup_snvs(); return 0; } diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c index 6f06daf86f..9d8e19d994 100644 --- a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c +++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c @@ -37,22 +37,6 @@ int board_phys_sdram_size(phys_size_t *size) return 0; } -/* IMX8M SNVS registers needed for the bootcount functionality */ -#define SNVS_BASE_ADDR 0x30370000 -#define SNVS_LPSR 0x4c -#define SNVS_LPLVDR 0x64 -#define SNVS_LPPGDR_INIT 0x41736166 - -static void setup_snvs(void) -{ - /* Enable SNVS clock */ - clock_enable(CCGR_SNVS, 1); - /* Initialize glitch detect */ - writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR); - /* Clear interrupt status */ - writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR); -} - static void setup_eqos(void) { struct iomuxc_gpr_base_regs *gpr = @@ -145,7 +129,6 @@ int board_init(void) { setup_eqos(); setup_fec(); - setup_snvs(); return 0; } diff --git a/board/menlo/mx8menlo/mx8menlo.c b/board/menlo/mx8menlo/mx8menlo.c index 9d3708a363..61fc4ec85f 100644 --- a/board/menlo/mx8menlo/mx8menlo.c +++ b/board/menlo/mx8menlo/mx8menlo.c @@ -12,24 +12,7 @@ #include <asm/mach-imx/iomux-v3.h> #include <spl.h> -#define SNVS_BASE_ADDR 0x30370000 -#define SNVS_LPSR 0x4c -#define SNVS_LPLVDR 0x64 -#define SNVS_LPPGDR_INIT 0x41736166 - -static void setup_snvs(void) -{ - /* Enable SNVS clock */ - clock_enable(CCGR_SNVS, 1); - /* Initialize glitch detect */ - writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR); - /* Clear interrupt status */ - writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR); -} - void board_early_init(void) { init_uart_clk(1); - - setup_snvs(); } @@ -48,11 +48,27 @@ void set_working_fdt_addr(ulong addr) /* * Get a value from the fdt and format it to be set in the environment */ -static int fdt_value_env_set(const void *nodep, int len, const char *var) +static int fdt_value_env_set(const void *nodep, int len, + const char *var, int index) { - if (is_printable_string(nodep, len)) - env_set(var, (void *)nodep); - else if (len == 4) { + if (is_printable_string(nodep, len)) { + const char *nodec = (const char *)nodep; + int i; + + /* + * Iterate over all members in stringlist and find the one at + * offset $index. If no such index exists, indicate failure. + */ + for (i = 0; i < len; i += strlen(nodec) + 1) { + if (index-- > 0) + continue; + + env_set(var, nodec + i); + return 0; + } + + return 1; + } else if (len == 4) { char buf[11]; sprintf(buf, "0x%08X", fdt32_to_cpu(*(fdt32_t *)nodep)); @@ -426,10 +442,14 @@ static int do_fdt(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) return 0; } else if (nodep && len > 0) { if (subcmd[0] == 'v') { + int index = 0; int ret; + if (argc == 7) + index = simple_strtoul(argv[6], NULL, 10); + ret = fdt_value_env_set(nodep, len, - var); + var, index); if (ret != 0) return ret; } else if (subcmd[0] == 'a') { @@ -1085,7 +1105,9 @@ static char fdt_help_text[] = "fdt resize [<extrasize>] - Resize fdt to size + padding to 4k addr + some optional <extrasize> if needed\n" "fdt print <path> [<prop>] - Recursive print starting at <path>\n" "fdt list <path> [<prop>] - Print one level starting at <path>\n" - "fdt get value <var> <path> <prop> - Get <property> and store in <var>\n" + "fdt get value <var> <path> <prop> [<index>] - Get <property> and store in <var>\n" + " In case of stringlist property, use optional <index>\n" + " to select string within the stringlist. Default is 0.\n" "fdt get name <var> <path> <index> - Get name of node <index> and store in <var>\n" "fdt get addr <var> <path> <prop> - Get start address of <property> and store in <var>\n" "fdt get size <var> <path> [<prop>] - Get size of [<property>] or num nodes and store in <var>\n" diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig index 9b79cc41b5..1cc98a2653 100644 --- a/configs/ae350_rv32_spl_defconfig +++ b/configs/ae350_rv32_spl_defconfig @@ -48,3 +48,4 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_ATCSPI200_SPI=y # CONFIG_BINMAN_FDT is not set +# CONFIG_AVAILABLE_HARTS is not set diff --git a/configs/ae350_rv32_spl_xip_defconfig b/configs/ae350_rv32_spl_xip_defconfig index c7b6ea4730..67c1e35c55 100644 --- a/configs/ae350_rv32_spl_xip_defconfig +++ b/configs/ae350_rv32_spl_xip_defconfig @@ -11,7 +11,7 @@ CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_TARGET_AX25_AE350=y CONFIG_RISCV_SMODE=y -CONFIG_XIP=y +CONFIG_SPL_XIP=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xffff00 diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig index 4c33ca2383..4318300300 100644 --- a/configs/ae350_rv64_spl_defconfig +++ b/configs/ae350_rv64_spl_defconfig @@ -49,3 +49,4 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_ATCSPI200_SPI=y # CONFIG_BINMAN_FDT is not set +# CONFIG_AVAILABLE_HARTS is not set diff --git a/configs/ae350_rv64_spl_xip_defconfig b/configs/ae350_rv64_spl_xip_defconfig index a197c97736..baee9bfe4a 100644 --- a/configs/ae350_rv64_spl_xip_defconfig +++ b/configs/ae350_rv64_spl_xip_defconfig @@ -12,7 +12,7 @@ CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_TARGET_AX25_AE350=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y -CONFIG_XIP=y +CONFIG_SPL_XIP=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe70 diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 5387f65926..f8589b010c 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -39,7 +39,6 @@ CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 -# CONFIG_SPL_FIT_IMAGE_TINY is not set CONFIG_SPL_I2C=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh b/doc/imx/habv4/csf_examples/mx8m/csf.sh index 6898513be5..7d267a7218 100644 --- a/doc/imx/habv4/csf_examples/mx8m/csf.sh +++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh @@ -40,7 +40,7 @@ dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset} conv=notrunc # fitImage tree fit_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SYS_TEXT_BASE=/ s@.*=@@p" .config) - $(sed -n "/CONFIG_FIT_EXTERNAL_OFFSET=/ s@.*=@@p" .config) - 0x200 - 0x40)) ) fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset)) -fit_block_size=$(printf "0x%x" $(( ( $(fdtdump u-boot.itb 2>/dev/null | sed -n "/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & ~(0x1000 - 0x1) + 0x20 )) ) +fit_block_size=$(printf "0x%x" $(( ( ($(fdtdump u-boot.itb 2>/dev/null | sed -n "/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20 )) ) sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size \"flash.bin\", \\\\@" csf_fit.tmp # U-Boot diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h index 0d89fc085f..e27aa368c9 100644 --- a/drivers/serial/usbtty.h +++ b/drivers/serial/usbtty.h @@ -13,8 +13,6 @@ #include <usbdevice.h> #if defined(CONFIG_PPC) #include <usb/mpc8xx_udc.h> -#elif defined(CONFIG_DW_UDC) -#include <usb/designware_udc.h> #elif defined(CONFIG_CI_UDC) #include <usb/ci_udc.h> #endif diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index fd13cf31b5..3afb45d5cc 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -48,7 +48,7 @@ config DM_USB automatically probed when found on the bus. config SPL_DM_USB - bool "Enable driver model for USB host most in SPL" + bool "Enable driver model for USB host mode in SPL" depends on SPL_DM && DM_USB default n if ARCH_MVEBU default y diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 306dd3127f..dd09ee0195 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -42,6 +42,5 @@ else ifdef CONFIG_USB_DEVICE obj-y += core.o obj-y += ep0.o -obj-$(CONFIG_DW_UDC) += designware_udc.o endif endif diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c deleted file mode 100644 index 41a6e8cb7d..0000000000 --- a/drivers/usb/gadget/designware_udc.c +++ /dev/null @@ -1,1021 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Based on drivers/usb/gadget/omap1510_udc.c - * TI OMAP1510 USB bus interface driver - * - * (C) Copyright 2009 - * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. - */ - -#include <common.h> -#include <serial.h> -#include <asm/io.h> -#include <linux/delay.h> - -#include <env.h> -#include <usbdevice.h> -#include "ep0.h" -#include <usb/designware_udc.h> -#include <usb/udc.h> -#include <asm/arch/hardware.h> - -#define UDC_INIT_MDELAY 80 /* Device settle delay */ - -/* Some kind of debugging output... */ -#ifndef DEBUG_DWUSBTTY -#define UDCDBG(str) -#define UDCDBGA(fmt, args...) -#else -#define UDCDBG(str) serial_printf(str "\n") -#define UDCDBGA(fmt, args...) serial_printf(fmt "\n", ##args) -#endif - -static struct urb *ep0_urb; -static struct usb_device_instance *udc_device; - -static struct plug_regs *const plug_regs_p = - (struct plug_regs * const)CONFIG_SYS_PLUG_BASE; -static struct udc_regs *const udc_regs_p = - (struct udc_regs * const)CONFIG_SYS_USBD_BASE; -static struct udc_endp_regs *const outep_regs_p = - &((struct udc_regs * const)CONFIG_SYS_USBD_BASE)->out_regs[0]; -static struct udc_endp_regs *const inep_regs_p = - &((struct udc_regs * const)CONFIG_SYS_USBD_BASE)->in_regs[0]; - -/* - * udc_state_transition - Write the next packet to TxFIFO. - * @initial: Initial state. - * @final: Final state. - * - * Helper function to implement device state changes. The device states and - * the events that transition between them are: - * - * STATE_ATTACHED - * || /\ - * \/ || - * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET - * || /\ - * \/ || - * STATE_POWERED - * || /\ - * \/ || - * DEVICE_RESET DEVICE_POWER_INTERRUPTION - * || /\ - * \/ || - * STATE_DEFAULT - * || /\ - * \/ || - * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET - * || /\ - * \/ || - * STATE_ADDRESSED - * || /\ - * \/ || - * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED - * || /\ - * \/ || - * STATE_CONFIGURED - * - * udc_state_transition transitions up (in the direction from STATE_ATTACHED - * to STATE_CONFIGURED) from the specified initial state to the specified final - * state, passing through each intermediate state on the way. If the initial - * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then - * no state transitions will take place. - * - * udc_state_transition also transitions down (in the direction from - * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the - * specified final state, passing through each intermediate state on the way. - * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final - * state, then no state transitions will take place. - * - * This function must only be called with interrupts disabled. - */ -static void udc_state_transition(usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial < final) { - switch (initial) { - case STATE_ATTACHED: - usbd_device_event_irq(udc_device, - DEVICE_HUB_CONFIGURED, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq(udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq(udc_device, - DEVICE_ADDRESS_ASSIGNED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq(udc_device, DEVICE_CONFIGURED, 0); - case STATE_CONFIGURED: - break; - default: - break; - } - } else if (initial > final) { - switch (initial) { - case STATE_CONFIGURED: - usbd_device_event_irq(udc_device, - DEVICE_DE_CONFIGURED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq(udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq(udc_device, - DEVICE_POWER_INTERRUPTION, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq(udc_device, DEVICE_HUB_RESET, 0); - case STATE_ATTACHED: - break; - default: - break; - } - } -} - -/* Stall endpoint */ -static void udc_stall_ep(u32 ep_num) -{ - writel(readl(&inep_regs_p[ep_num].endp_cntl) | ENDP_CNTL_STALL, - &inep_regs_p[ep_num].endp_cntl); - - writel(readl(&outep_regs_p[ep_num].endp_cntl) | ENDP_CNTL_STALL, - &outep_regs_p[ep_num].endp_cntl); -} - -static void *get_fifo(int ep_num, int in) -{ - u32 *fifo_ptr = (u32 *)CONFIG_SYS_FIFO_BASE; - - switch (ep_num) { - case UDC_EP3: - fifo_ptr += readl(&inep_regs_p[1].endp_bsorfn); - /* break intentionally left out */ - - case UDC_EP1: - fifo_ptr += readl(&inep_regs_p[0].endp_bsorfn); - /* break intentionally left out */ - - case UDC_EP0: - default: - if (in) { - fifo_ptr += - readl(&outep_regs_p[2].endp_maxpacksize) >> 16; - /* break intentionally left out */ - } else { - break; - } - - case UDC_EP2: - fifo_ptr += readl(&outep_regs_p[0].endp_maxpacksize) >> 16; - /* break intentionally left out */ - } - - return (void *)fifo_ptr; -} - -static int usbgetpckfromfifo(int epNum, u8 *bufp, u32 len) -{ - u8 *fifo_ptr = (u8 *)get_fifo(epNum, 0); - u32 i, nw, nb; - u32 *wrdp; - u8 *bytp; - u32 tmp[128]; - - if (readl(&udc_regs_p->dev_stat) & DEV_STAT_RXFIFO_EMPTY) - return -1; - - nw = len / sizeof(u32); - nb = len % sizeof(u32); - - /* use tmp buf if bufp is not word aligned */ - if ((int)bufp & 0x3) - wrdp = (u32 *)&tmp[0]; - else - wrdp = (u32 *)bufp; - - for (i = 0; i < nw; i++) { - writel(readl(fifo_ptr), wrdp); - wrdp++; - } - - bytp = (u8 *)wrdp; - for (i = 0; i < nb; i++) { - writeb(readb(fifo_ptr), bytp); - fifo_ptr++; - bytp++; - } - readl(&outep_regs_p[epNum].write_done); - - /* copy back tmp buffer to bufp if bufp is not word aligned */ - if ((int)bufp & 0x3) - memcpy(bufp, tmp, len); - - return 0; -} - -static void usbputpcktofifo(int epNum, u8 *bufp, u32 len) -{ - u32 i, nw, nb; - u32 *wrdp; - u8 *bytp; - u8 *fifo_ptr = get_fifo(epNum, 1); - - nw = len / sizeof(int); - nb = len % sizeof(int); - wrdp = (u32 *)bufp; - for (i = 0; i < nw; i++) { - writel(*wrdp, fifo_ptr); - wrdp++; - } - - bytp = (u8 *)wrdp; - for (i = 0; i < nb; i++) { - writeb(*bytp, fifo_ptr); - fifo_ptr++; - bytp++; - } -} - -/* - * dw_write_noniso_tx_fifo - Write the next packet to TxFIFO. - * @endpoint: Endpoint pointer. - * - * If the endpoint has an active tx_urb, then the next packet of data from the - * URB is written to the tx FIFO. The total amount of data in the urb is given - * by urb->actual_length. The maximum amount of data that can be sent in any - * one packet is given by endpoint->tx_packetSize. The number of data bytes - * from this URB that have already been transmitted is given by endpoint->sent. - * endpoint->last is updated by this routine with the number of data bytes - * transmitted in this packet. - * - */ -static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance - *endpoint) -{ - struct urb *urb = endpoint->tx_urb; - int align; - - if (urb) { - u32 last; - - UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d", - urb->buffer, urb->buffer_length, urb->actual_length); - - last = min_t(u32, urb->actual_length - endpoint->sent, - endpoint->tx_packetSize); - - if (last) { - u8 *cp = urb->buffer + endpoint->sent; - - /* - * This ensures that USBD packet fifo is accessed - * - through word aligned pointer or - * - through non word aligned pointer but only - * with a max length to make the next packet - * word aligned - */ - - align = ((ulong)cp % sizeof(int)); - if (align) - last = min(last, sizeof(int) - align); - - UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d", - endpoint->sent, endpoint->tx_packetSize, last); - - usbputpcktofifo(endpoint->endpoint_address & - USB_ENDPOINT_NUMBER_MASK, cp, last); - } - endpoint->last = last; - } -} - -/* - * Handle SETUP USB interrupt. - * This function implements TRM Figure 14-14. - */ -static void dw_udc_setup(struct usb_endpoint_instance *endpoint) -{ - u8 *datap = (u8 *)&ep0_urb->device_request; - int ep_addr = endpoint->endpoint_address; - - UDCDBG("-> Entering device setup"); - usbgetpckfromfifo(ep_addr, datap, 8); - - /* Try to process setup packet */ - if (ep0_recv_setup(ep0_urb)) { - /* Not a setup packet, stall next EP0 transaction */ - udc_stall_ep(0); - UDCDBG("can't parse setup packet, still waiting for setup"); - return; - } - - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) - == USB_REQ_HOST2DEVICE) { - UDCDBG("control write on EP0"); - if (le16_to_cpu(ep0_urb->device_request.wLength)) { - /* Stall this request */ - UDCDBG("Stalling unsupported EP0 control write data " - "stage."); - udc_stall_ep(0); - } - } else { - - UDCDBG("control read on EP0"); - /* - * The ep0_recv_setup function has already placed our response - * packet data in ep0_urb->buffer and the packet length in - * ep0_urb->actual_length. - */ - endpoint->tx_urb = ep0_urb; - endpoint->sent = 0; - /* - * Write packet data to the FIFO. dw_write_noniso_tx_fifo - * will update endpoint->last with the number of bytes written - * to the FIFO. - */ - dw_write_noniso_tx_fifo(endpoint); - - writel(0x0, &inep_regs_p[ep_addr].write_done); - } - - udc_unset_nak(endpoint->endpoint_address); - - UDCDBG("<- Leaving device setup"); -} - -/* - * Handle endpoint 0 RX interrupt - */ -static void dw_udc_ep0_rx(struct usb_endpoint_instance *endpoint) -{ - u8 dummy[64]; - - UDCDBG("RX on EP0"); - - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType - & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { - /* - * This rx interrupt must be for a control write data - * stage packet. - * - * We don't support control write data stages. - * We should never end up here. - */ - - UDCDBG("Stalling unexpected EP0 control write " - "data stage packet"); - udc_stall_ep(0); - } else { - /* - * This rx interrupt must be for a control read status - * stage packet. - */ - UDCDBG("ACK on EP0 control read status stage packet"); - u32 len = (readl(&outep_regs_p[0].endp_status) >> 11) & 0xfff; - usbgetpckfromfifo(0, dummy, len); - } -} - -/* - * Handle endpoint 0 TX interrupt - */ -static void dw_udc_ep0_tx(struct usb_endpoint_instance *endpoint) -{ - struct usb_device_request *request = &ep0_urb->device_request; - int ep_addr; - - UDCDBG("TX on EP0"); - - /* Check direction */ - if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == - USB_REQ_HOST2DEVICE) { - /* - * This tx interrupt must be for a control write status - * stage packet. - */ - UDCDBG("ACK on EP0 control write status stage packet"); - } else { - /* - * This tx interrupt must be for a control read data - * stage packet. - */ - int wLength = le16_to_cpu(request->wLength); - - /* - * Update our count of bytes sent so far in this - * transfer. - */ - endpoint->sent += endpoint->last; - - /* - * We are finished with this transfer if we have sent - * all of the bytes in our tx urb (urb->actual_length) - * unless we need a zero-length terminating packet. We - * need a zero-length terminating packet if we returned - * fewer bytes than were requested (wLength) by the host, - * and the number of bytes we returned is an exact - * multiple of the packet size endpoint->tx_packetSize. - */ - if ((endpoint->sent == ep0_urb->actual_length) && - ((ep0_urb->actual_length == wLength) || - (endpoint->last != endpoint->tx_packetSize))) { - /* Done with control read data stage. */ - UDCDBG("control read data stage complete"); - } else { - /* - * We still have another packet of data to send - * in this control read data stage or else we - * need a zero-length terminating packet. - */ - UDCDBG("ACK control read data stage packet"); - dw_write_noniso_tx_fifo(endpoint); - - ep_addr = endpoint->endpoint_address; - writel(0x0, &inep_regs_p[ep_addr].write_done); - } - } -} - -static struct usb_endpoint_instance *dw_find_ep(int ep) -{ - int i; - - for (i = 0; i < udc_device->bus->max_endpoints; i++) { - if ((udc_device->bus->endpoint_array[i].endpoint_address & - USB_ENDPOINT_NUMBER_MASK) == ep) - return &udc_device->bus->endpoint_array[i]; - } - return NULL; -} - -/* - * Handle RX transaction on non-ISO endpoint. - * The ep argument is a physical endpoint number for a non-ISO IN endpoint - * in the range 1 to 15. - */ -static void dw_udc_epn_rx(int ep) -{ - int nbytes = 0; - struct urb *urb; - struct usb_endpoint_instance *endpoint = dw_find_ep(ep); - - if (endpoint) { - urb = endpoint->rcv_urb; - - if (urb) { - u8 *cp = urb->buffer + urb->actual_length; - - nbytes = (readl(&outep_regs_p[ep].endp_status) >> 11) & - 0xfff; - usbgetpckfromfifo(ep, cp, nbytes); - usbd_rcv_complete(endpoint, nbytes, 0); - } - } -} - -/* - * Handle TX transaction on non-ISO endpoint. - * The ep argument is a physical endpoint number for a non-ISO IN endpoint - * in the range 16 to 30. - */ -static void dw_udc_epn_tx(int ep) -{ - struct usb_endpoint_instance *endpoint = dw_find_ep(ep); - - if (!endpoint) - return; - - /* - * We need to transmit a terminating zero-length packet now if - * we have sent all of the data in this URB and the transfer - * size was an exact multiple of the packet size. - */ - if (endpoint->tx_urb && - (endpoint->last == endpoint->tx_packetSize) && - (endpoint->tx_urb->actual_length - endpoint->sent - - endpoint->last == 0)) { - /* handle zero length packet here */ - writel(0x0, &inep_regs_p[ep].write_done); - - } - - if (endpoint->tx_urb && endpoint->tx_urb->actual_length) { - /* retire the data that was just sent */ - usbd_tx_complete(endpoint); - /* - * Check to see if we have more data ready to transmit - * now. - */ - if (endpoint->tx_urb && endpoint->tx_urb->actual_length) { - /* write data to FIFO */ - dw_write_noniso_tx_fifo(endpoint); - writel(0x0, &inep_regs_p[ep].write_done); - - } else if (endpoint->tx_urb - && (endpoint->tx_urb->actual_length == 0)) { - /* udc_set_nak(ep); */ - } - } -} - -/* - * Start of public functions. - */ - -/* Called to start packet transmission. */ -int udc_endpoint_write(struct usb_endpoint_instance *endpoint) -{ - udc_unset_nak(endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK); - return 0; -} - -/* Start to initialize h/w stuff */ -int udc_init(void) -{ - int i; - u32 plug_st; - - udc_device = NULL; - - UDCDBG("starting"); - - readl(&plug_regs_p->plug_pending); - - for (i = 0; i < UDC_INIT_MDELAY; i++) - udelay(1000); - - plug_st = readl(&plug_regs_p->plug_state); - writel(plug_st | PLUG_STATUS_EN, &plug_regs_p->plug_state); - - writel(~0x0, &udc_regs_p->endp_int); - writel(~0x0, &udc_regs_p->dev_int_mask); - writel(~0x0, &udc_regs_p->endp_int_mask); - -#ifndef CONFIG_USBD_HS - writel(DEV_CONF_FS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW | - DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf); -#else - writel(DEV_CONF_HS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW | - DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf); -#endif - - writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl); - - /* Clear all interrupts pending */ - writel(DEV_INT_MSK, &udc_regs_p->dev_int); - - return 0; -} - -int is_usbd_high_speed(void) -{ - return (readl(&udc_regs_p->dev_stat) & DEV_STAT_ENUM) ? 0 : 1; -} - -/* - * udc_setup_ep - setup endpoint - * Associate a physical endpoint with endpoint_instance - */ -void udc_setup_ep(struct usb_device_instance *device, - u32 ep, struct usb_endpoint_instance *endpoint) -{ - UDCDBGA("setting up endpoint addr %x", endpoint->endpoint_address); - int ep_addr; - int ep_num, ep_type; - int packet_size; - int buffer_size; - int attributes; - char *tt; - u32 endp_intmask; - - if ((ep != 0) && (udc_device->device_state < STATE_ADDRESSED)) - return; - - tt = env_get("usbtty"); - if (!tt) - tt = "generic"; - - ep_addr = endpoint->endpoint_address; - ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* IN endpoint */ - packet_size = endpoint->tx_packetSize; - buffer_size = packet_size * 2; - attributes = endpoint->tx_attributes; - } else { - /* OUT endpoint */ - packet_size = endpoint->rcv_packetSize; - buffer_size = packet_size * 2; - attributes = endpoint->rcv_attributes; - } - - switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { - case USB_ENDPOINT_XFER_CONTROL: - ep_type = ENDP_EPTYPE_CNTL; - break; - case USB_ENDPOINT_XFER_BULK: - default: - ep_type = ENDP_EPTYPE_BULK; - break; - case USB_ENDPOINT_XFER_INT: - ep_type = ENDP_EPTYPE_INT; - break; - case USB_ENDPOINT_XFER_ISOC: - ep_type = ENDP_EPTYPE_ISO; - break; - } - - struct udc_endp_regs *out_p = &outep_regs_p[ep_num]; - struct udc_endp_regs *in_p = &inep_regs_p[ep_num]; - - if (!ep_addr) { - /* Setup endpoint 0 */ - buffer_size = packet_size; - - writel(readl(&in_p->endp_cntl) | ENDP_CNTL_CNAK, - &in_p->endp_cntl); - - writel(readl(&out_p->endp_cntl) | ENDP_CNTL_CNAK, - &out_p->endp_cntl); - - writel(ENDP_CNTL_CONTROL | ENDP_CNTL_FLUSH, &in_p->endp_cntl); - - writel(buffer_size / sizeof(int), &in_p->endp_bsorfn); - - writel(packet_size, &in_p->endp_maxpacksize); - - writel(ENDP_CNTL_CONTROL | ENDP_CNTL_RRDY, &out_p->endp_cntl); - - writel(packet_size | ((buffer_size / sizeof(int)) << 16), - &out_p->endp_maxpacksize); - - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* Setup the IN endpoint */ - writel(0x0, &in_p->endp_status); - writel((ep_type << 4) | ENDP_CNTL_RRDY, &in_p->endp_cntl); - writel(buffer_size / sizeof(int), &in_p->endp_bsorfn); - writel(packet_size, &in_p->endp_maxpacksize); - - if (!strcmp(tt, "cdc_acm")) { - if (ep_type == ENDP_EPTYPE_INT) { - /* Conf no. 1 Interface no. 0 */ - writel((packet_size << 19) | - ENDP_EPDIR_IN | (1 << 7) | - (0 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } else { - /* Conf no. 1 Interface no. 1 */ - writel((packet_size << 19) | - ENDP_EPDIR_IN | (1 << 7) | - (1 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } - } else { - /* Conf no. 1 Interface no. 0 */ - writel((packet_size << 19) | - ENDP_EPDIR_IN | (1 << 7) | - (0 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } - - } else { - /* Setup the OUT endpoint */ - writel(0x0, &out_p->endp_status); - writel((ep_type << 4) | ENDP_CNTL_RRDY, &out_p->endp_cntl); - writel(packet_size | ((buffer_size / sizeof(int)) << 16), - &out_p->endp_maxpacksize); - - if (!strcmp(tt, "cdc_acm")) { - writel((packet_size << 19) | - ENDP_EPDIR_OUT | (1 << 7) | - (1 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } else { - writel((packet_size << 19) | - ENDP_EPDIR_OUT | (1 << 7) | - (0 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } - - } - - endp_intmask = readl(&udc_regs_p->endp_int_mask); - endp_intmask &= ~((1 << ep_num) | 0x10000 << ep_num); - writel(endp_intmask, &udc_regs_p->endp_int_mask); -} - -/* Turn on the USB connection by enabling the pullup resistor */ -void udc_connect(void) -{ - u32 plug_st, dev_cntl; - - dev_cntl = readl(&udc_regs_p->dev_cntl); - dev_cntl |= DEV_CNTL_SOFTDISCONNECT; - writel(dev_cntl, &udc_regs_p->dev_cntl); - - udelay(1000); - - dev_cntl = readl(&udc_regs_p->dev_cntl); - dev_cntl &= ~DEV_CNTL_SOFTDISCONNECT; - writel(dev_cntl, &udc_regs_p->dev_cntl); - - plug_st = readl(&plug_regs_p->plug_state); - plug_st &= ~(PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE); - writel(plug_st, &plug_regs_p->plug_state); -} - -/* Turn off the USB connection by disabling the pullup resistor */ -void udc_disconnect(void) -{ - u32 plug_st; - - writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl); - - plug_st = readl(&plug_regs_p->plug_state); - plug_st |= (PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE); - writel(plug_st, &plug_regs_p->plug_state); -} - -/* Switch on the UDC */ -void udc_enable(struct usb_device_instance *device) -{ - UDCDBGA("enable device %p, status %d", device, device->status); - - /* Save the device structure pointer */ - udc_device = device; - - /* Setup ep0 urb */ - if (!ep0_urb) { - ep0_urb = - usbd_alloc_urb(udc_device, udc_device->bus->endpoint_array); - } else { - serial_printf("udc_enable: ep0_urb already allocated %p\n", - ep0_urb); - } - - writel(DEV_INT_SOF, &udc_regs_p->dev_int_mask); -} - -/** - * udc_startup - allow udc code to do any additional startup - */ -void udc_startup_events(struct usb_device_instance *device) -{ - /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ - usbd_device_event_irq(device, DEVICE_INIT, 0); - - /* - * The DEVICE_CREATE event puts the USB device in the state - * STATE_ATTACHED. - */ - usbd_device_event_irq(device, DEVICE_CREATE, 0); - - /* - * Some USB controller driver implementations signal - * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. - * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, - * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. - * The DW USB client controller has the capability to detect when the - * USB cable is connected to a powered USB bus, so we will defer the - * DEVICE_HUB_CONFIGURED and DEVICE_RESET events until later. - */ - - udc_enable(device); -} - -/* - * Plug detection interrupt handling - */ -static void dw_udc_plug_irq(void) -{ - if (readl(&plug_regs_p->plug_state) & PLUG_STATUS_ATTACHED) { - /* - * USB cable attached - * Turn off PHY reset bit (PLUG detect). - * Switch PHY opmode to normal operation (PLUG detect). - */ - udc_connect(); - writel(DEV_INT_SOF, &udc_regs_p->dev_int_mask); - - UDCDBG("device attached and powered"); - udc_state_transition(udc_device->device_state, STATE_POWERED); - } else { - writel(~0x0, &udc_regs_p->dev_int_mask); - - UDCDBG("device detached or unpowered"); - udc_state_transition(udc_device->device_state, STATE_ATTACHED); - } -} - -/* - * Device interrupt handling - */ -static void dw_udc_dev_irq(void) -{ - if (readl(&udc_regs_p->dev_int) & DEV_INT_USBRESET) { - writel(~0x0, &udc_regs_p->endp_int_mask); - - writel(readl(&inep_regs_p[0].endp_cntl) | ENDP_CNTL_FLUSH, - &inep_regs_p[0].endp_cntl); - - writel(DEV_INT_USBRESET, &udc_regs_p->dev_int); - - /* - * This endpoint0 specific register can be programmed only - * after the phy clock is initialized - */ - writel((EP0_MAX_PACKET_SIZE << 19) | ENDP_EPTYPE_CNTL, - &udc_regs_p->udc_endp_reg[0]); - - UDCDBG("device reset in progess"); - udc_state_transition(udc_device->device_state, STATE_DEFAULT); - } - - /* Device Enumeration completed */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_ENUM) { - writel(DEV_INT_ENUM, &udc_regs_p->dev_int); - - /* Endpoint interrupt enabled for Ctrl IN & Ctrl OUT */ - writel(readl(&udc_regs_p->endp_int_mask) & ~0x10001, - &udc_regs_p->endp_int_mask); - - UDCDBG("default -> addressed"); - udc_state_transition(udc_device->device_state, STATE_ADDRESSED); - } - - /* The USB will be in SUSPEND in 3 ms */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_INACTIVE) { - writel(DEV_INT_INACTIVE, &udc_regs_p->dev_int); - - UDCDBG("entering inactive state"); - /* usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); */ - } - - /* SetConfiguration command received */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SETCFG) { - writel(DEV_INT_SETCFG, &udc_regs_p->dev_int); - - UDCDBG("entering configured state"); - udc_state_transition(udc_device->device_state, - STATE_CONFIGURED); - } - - /* SetInterface command received */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SETINTF) - writel(DEV_INT_SETINTF, &udc_regs_p->dev_int); - - /* USB Suspend detected on cable */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SUSPUSB) { - writel(DEV_INT_SUSPUSB, &udc_regs_p->dev_int); - - UDCDBG("entering suspended state"); - usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); - } - - /* USB Start-Of-Frame detected on cable */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SOF) - writel(DEV_INT_SOF, &udc_regs_p->dev_int); -} - -/* - * Endpoint interrupt handling - */ -static void dw_udc_endpoint_irq(void) -{ - while (readl(&udc_regs_p->endp_int) & ENDP0_INT_CTRLOUT) { - - writel(ENDP0_INT_CTRLOUT, &udc_regs_p->endp_int); - - if ((readl(&outep_regs_p[0].endp_status) & ENDP_STATUS_OUTMSK) - == ENDP_STATUS_OUT_SETUP) { - dw_udc_setup(udc_device->bus->endpoint_array + 0); - writel(ENDP_STATUS_OUT_SETUP, - &outep_regs_p[0].endp_status); - - } else if ((readl(&outep_regs_p[0].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_DATA) { - dw_udc_ep0_rx(udc_device->bus->endpoint_array + 0); - writel(ENDP_STATUS_OUT_DATA, - &outep_regs_p[0].endp_status); - - } else if ((readl(&outep_regs_p[0].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_NONE) { - /* NONE received */ - } - - writel(0x0, &outep_regs_p[0].endp_status); - } - - if (readl(&udc_regs_p->endp_int) & ENDP0_INT_CTRLIN) { - dw_udc_ep0_tx(udc_device->bus->endpoint_array + 0); - - writel(ENDP_STATUS_IN, &inep_regs_p[0].endp_status); - writel(ENDP0_INT_CTRLIN, &udc_regs_p->endp_int); - } - - if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) { - u32 epnum = 0; - u32 ep_int = readl(&udc_regs_p->endp_int) & - ENDP_INT_NONISOOUT_MSK; - - ep_int >>= 16; - while (0x0 == (ep_int & 0x1)) { - ep_int >>= 1; - epnum++; - } - - writel((1 << 16) << epnum, &udc_regs_p->endp_int); - - if ((readl(&outep_regs_p[epnum].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_DATA) { - - dw_udc_epn_rx(epnum); - writel(ENDP_STATUS_OUT_DATA, - &outep_regs_p[epnum].endp_status); - } else if ((readl(&outep_regs_p[epnum].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_NONE) { - writel(0x0, &outep_regs_p[epnum].endp_status); - } - } - - if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOIN_MSK) { - u32 epnum = 0; - u32 ep_int = readl(&udc_regs_p->endp_int) & - ENDP_INT_NONISOIN_MSK; - - while (0x0 == (ep_int & 0x1)) { - ep_int >>= 1; - epnum++; - } - - if (readl(&inep_regs_p[epnum].endp_status) & ENDP_STATUS_IN) { - writel(ENDP_STATUS_IN, - &outep_regs_p[epnum].endp_status); - dw_udc_epn_tx(epnum); - - writel(ENDP_STATUS_IN, - &outep_regs_p[epnum].endp_status); - } - - writel((1 << epnum), &udc_regs_p->endp_int); - } -} - -/* - * UDC interrupts - */ -void udc_irq(void) -{ - /* - * Loop while we have interrupts. - * If we don't do this, the input chain - * polling delay is likely to miss - * host requests. - */ - while (readl(&plug_regs_p->plug_pending)) - dw_udc_plug_irq(); - - while (readl(&udc_regs_p->dev_int)) - dw_udc_dev_irq(); - - if (readl(&udc_regs_p->endp_int)) - dw_udc_endpoint_irq(); -} - -/* Flow control */ -void udc_set_nak(int epid) -{ - writel(readl(&inep_regs_p[epid].endp_cntl) | ENDP_CNTL_SNAK, - &inep_regs_p[epid].endp_cntl); - - writel(readl(&outep_regs_p[epid].endp_cntl) | ENDP_CNTL_SNAK, - &outep_regs_p[epid].endp_cntl); -} - -void udc_unset_nak(int epid) -{ - u32 val; - - val = readl(&inep_regs_p[epid].endp_cntl); - val &= ~ENDP_CNTL_SNAK; - val |= ENDP_CNTL_CNAK; - writel(val, &inep_regs_p[epid].endp_cntl); - - val = readl(&outep_regs_p[epid].endp_cntl); - val &= ~ENDP_CNTL_SNAK; - val |= ENDP_CNTL_CNAK; - writel(val, &outep_regs_p[epid].endp_cntl); -} diff --git a/include/usb/designware_udc.h b/include/usb/designware_udc.h deleted file mode 100644 index f716f07dd0..0000000000 --- a/include/usb/designware_udc.h +++ /dev/null @@ -1,183 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. - */ - -#ifndef __DW_UDC_H -#define __DW_UDC_H - -/* - * Defines for USBD - * - * The udc_ahb controller has three AHB slaves: - * - * 1. THe UDC registers - * 2. The plug detect - * 3. The RX/TX FIFO - */ - -#define MAX_ENDPOINTS 16 - -struct udc_endp_regs { - u32 endp_cntl; - u32 endp_status; - u32 endp_bsorfn; - u32 endp_maxpacksize; - u32 reserved_1; - u32 endp_desc_point; - u32 reserved_2; - u32 write_done; -}; - -/* Endpoint Control Register definitions */ - -#define ENDP_CNTL_STALL 0x00000001 -#define ENDP_CNTL_FLUSH 0x00000002 -#define ENDP_CNTL_SNOOP 0x00000004 -#define ENDP_CNTL_POLL 0x00000008 -#define ENDP_CNTL_CONTROL 0x00000000 -#define ENDP_CNTL_ISO 0x00000010 -#define ENDP_CNTL_BULK 0x00000020 -#define ENDP_CNTL_INT 0x00000030 -#define ENDP_CNTL_NAK 0x00000040 -#define ENDP_CNTL_SNAK 0x00000080 -#define ENDP_CNTL_CNAK 0x00000100 -#define ENDP_CNTL_RRDY 0x00000200 - -/* Endpoint Satus Register definitions */ - -#define ENDP_STATUS_PIDMSK 0x0000000f -#define ENDP_STATUS_OUTMSK 0x00000030 -#define ENDP_STATUS_OUT_NONE 0x00000000 -#define ENDP_STATUS_OUT_DATA 0x00000010 -#define ENDP_STATUS_OUT_SETUP 0x00000020 -#define ENDP_STATUS_IN 0x00000040 -#define ENDP_STATUS_BUFFNAV 0x00000080 -#define ENDP_STATUS_FATERR 0x00000100 -#define ENDP_STATUS_HOSTBUSERR 0x00000200 -#define ENDP_STATUS_TDC 0x00000400 -#define ENDP_STATUS_RXPKTMSK 0x003ff800 - -struct udc_regs { - struct udc_endp_regs in_regs[MAX_ENDPOINTS]; - struct udc_endp_regs out_regs[MAX_ENDPOINTS]; - u32 dev_conf; - u32 dev_cntl; - u32 dev_stat; - u32 dev_int; - u32 dev_int_mask; - u32 endp_int; - u32 endp_int_mask; - u32 reserved_3[0x39]; - u32 reserved_4; /* offset 0x500 */ - u32 udc_endp_reg[MAX_ENDPOINTS]; -}; - -/* Device Configuration Register definitions */ - -#define DEV_CONF_HS_SPEED 0x00000000 -#define DEV_CONF_LS_SPEED 0x00000002 -#define DEV_CONF_FS_SPEED 0x00000003 -#define DEV_CONF_REMWAKEUP 0x00000004 -#define DEV_CONF_SELFPOW 0x00000008 -#define DEV_CONF_SYNCFRAME 0x00000010 -#define DEV_CONF_PHYINT_8 0x00000020 -#define DEV_CONF_PHYINT_16 0x00000000 -#define DEV_CONF_UTMI_BIDIR 0x00000040 -#define DEV_CONF_STATUS_STALL 0x00000080 - -/* Device Control Register definitions */ - -#define DEV_CNTL_RESUME 0x00000001 -#define DEV_CNTL_TFFLUSH 0x00000002 -#define DEV_CNTL_RXDMAEN 0x00000004 -#define DEV_CNTL_TXDMAEN 0x00000008 -#define DEV_CNTL_DESCRUPD 0x00000010 -#define DEV_CNTL_BIGEND 0x00000020 -#define DEV_CNTL_BUFFILL 0x00000040 -#define DEV_CNTL_TSHLDEN 0x00000080 -#define DEV_CNTL_BURSTEN 0x00000100 -#define DEV_CNTL_DMAMODE 0x00000200 -#define DEV_CNTL_SOFTDISCONNECT 0x00000400 -#define DEV_CNTL_SCALEDOWN 0x00000800 -#define DEV_CNTL_BURSTLENU 0x00010000 -#define DEV_CNTL_BURSTLENMSK 0x00ff0000 -#define DEV_CNTL_TSHLDLENU 0x01000000 -#define DEV_CNTL_TSHLDLENMSK 0xff000000 - -/* Device Status Register definitions */ - -#define DEV_STAT_CFG 0x0000000f -#define DEV_STAT_INTF 0x000000f0 -#define DEV_STAT_ALT 0x00000f00 -#define DEV_STAT_SUSP 0x00001000 -#define DEV_STAT_ENUM 0x00006000 -#define DEV_STAT_ENUM_SPEED_HS 0x00000000 -#define DEV_STAT_ENUM_SPEED_FS 0x00002000 -#define DEV_STAT_ENUM_SPEED_LS 0x00004000 -#define DEV_STAT_RXFIFO_EMPTY 0x00008000 -#define DEV_STAT_PHY_ERR 0x00010000 -#define DEV_STAT_TS 0xf0000000 - -/* Device Interrupt Register definitions */ - -#define DEV_INT_MSK 0x0000007f -#define DEV_INT_SETCFG 0x00000001 -#define DEV_INT_SETINTF 0x00000002 -#define DEV_INT_INACTIVE 0x00000004 -#define DEV_INT_USBRESET 0x00000008 -#define DEV_INT_SUSPUSB 0x00000010 -#define DEV_INT_SOF 0x00000020 -#define DEV_INT_ENUM 0x00000040 - -/* Endpoint Interrupt Register definitions */ - -#define ENDP0_INT_CTRLIN 0x00000001 -#define ENDP1_INT_BULKIN 0x00000002 -#define ENDP_INT_NONISOIN_MSK 0x0000AAAA -#define ENDP2_INT_BULKIN 0x00000004 -#define ENDP0_INT_CTRLOUT 0x00010000 -#define ENDP1_INT_BULKOUT 0x00020000 -#define ENDP2_INT_BULKOUT 0x00040000 -#define ENDP_INT_NONISOOUT_MSK 0x55540000 - -/* Endpoint Register definitions */ -#define ENDP_EPDIR_OUT 0x00000000 -#define ENDP_EPDIR_IN 0x00000010 -#define ENDP_EPTYPE_CNTL 0x0 -#define ENDP_EPTYPE_ISO 0x1 -#define ENDP_EPTYPE_BULK 0x2 -#define ENDP_EPTYPE_INT 0x3 - -/* - * Defines for Plug Detect - */ - -struct plug_regs { - u32 plug_state; - u32 plug_pending; -}; - -/* Plug State Register definitions */ -#define PLUG_STATUS_EN 0x1 -#define PLUG_STATUS_ATTACHED 0x2 -#define PLUG_STATUS_PHY_RESET 0x4 -#define PLUG_STATUS_PHY_MODE 0x8 - -/* - * Defines for UDC FIFO (Slave Mode) - */ -struct udcfifo_regs { - u32 *fifo_p; -}; - -/* - * UDC endpoint definitions - */ -#define UDC_EP0 0 -#define UDC_EP1 1 -#define UDC_EP2 2 -#define UDC_EP3 3 - -#endif /* __DW_UDC_H */ diff --git a/tools/binman/bintool.py b/tools/binman/bintool.py index 032179a99d..a582d9d344 100644 --- a/tools/binman/bintool.py +++ b/tools/binman/bintool.py @@ -319,7 +319,7 @@ class Bintool: return result.stdout @classmethod - def build_from_git(cls, git_repo, make_target, bintool_path): + def build_from_git(cls, git_repo, make_target, bintool_path, flags=None): """Build a bintool from a git repo This clones the repo in a temporary directory, builds it with 'make', @@ -330,6 +330,7 @@ class Bintool: make_target (str): Target to pass to 'make' to build the tool bintool_path (str): Relative path of the tool in the repo, after build is complete + flags (list of str): Flags or variables to pass to make, or None Returns: tuple: @@ -341,8 +342,11 @@ class Bintool: print(f"- clone git repo '{git_repo}' to '{tmpdir}'") tools.run('git', 'clone', '--depth', '1', git_repo, tmpdir) print(f"- build target '{make_target}'") - tools.run('make', '-C', tmpdir, '-j', f'{multiprocessing.cpu_count()}', - make_target) + cmd = ['make', '-C', tmpdir, '-j', f'{multiprocessing.cpu_count()}', + make_target] + if flags: + cmd += flags + tools.run(*cmd) fname = os.path.join(tmpdir, bintool_path) if not os.path.exists(fname): print(f"- File '{fname}' was not produced") diff --git a/tools/binman/btool/futility.py b/tools/binman/btool/futility.py index 75a05c2ac6..04c9aefe9b 100644 --- a/tools/binman/btool/futility.py +++ b/tools/binman/btool/futility.py @@ -160,8 +160,17 @@ class Bintoolfutility(bintool.Bintool): Raises: Valuerror: Fetching could not be completed """ - if method != bintool.FETCH_BIN: + if method != bintool.FETCH_BUILD: return None - fname, tmpdir = self.fetch_from_drive( - '1hdsInzsE4aJbmBeJ663kYgjOQyW1I-E0') - return fname, tmpdir + + # The Chromium OS repo is here: + # https://chromium.googlesource.com/chromiumos/platform/vboot_reference/ + # + # Unfortunately this requires logging in and obtaining a line for the + # .gitcookies file. So use a mirror instead. + result = self.build_from_git( + 'https://github.com/sjg20/vboot_reference.git', + 'all', + 'build/futility/futility', + flags=['USE_FLASHROM=0']) + return result |