arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1

Update the am62 and am625 device-trees from linux v6.5-rc1. This needed
the following tweaks to the u-boot specific dtsi as well:
- Switch tick-timer to the main_timer as it's now defined in the main dtsi
- Secure proxies are defined in SoC dtsi
- Drop duplicate nodes - u-boot.dtsi is includes in r5-sk, no need for
  either the definitions from main.dtsi OR duplication from u-boot.dtsi

Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Maxime Ripard <mripard@kernel.org>
Cc: Francesco Dolcini <francesco@dolcini.it>
Cc: Sjoerd Simons <sjoerd@collabora.com>
Cc: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Nishanth Menon <nm@ti.com>

1 files changed, 15 insertions, 77 deletions

diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index 3ec5bad735..bf219226b9 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -9,7 +9,6 @@
 #include "k3-am62-ddr.dtsi"
 
 #include "k3-am625-sk-u-boot.dtsi"
-#include "k3-am625-sk-binman.dtsi"
 
 / {
 	aliases {
@@ -19,31 +18,6 @@
 		serial3 = &main_uart1;
 	};
 
-	chosen {
-		stdout-path = "serial2:115200n8";
-		tick-timer = &timer1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-
-		bootph-pre-ram;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		secure_ddr: optee@9e800000 {
-			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
-			alignment = <0x1000>;
-			no-map;
-		};
-	};
-
 	a53_0: a53@0 {
 		compatible = "ti,am654-rproc";
 		reg = <0x00 0x00a90000 0x00 0x10>;
@@ -81,80 +55,44 @@
 	ti,secure-host;
 };
 
-&cbass_mcu {
-	mcu_esm: esm@4100000 {
-		compatible = "ti,j721e-esm";
-		reg = <0x0 0x4100000 0x0 0x1000>;
-		ti,esm-pins = <0>, <1>, <2>, <85>;
-		bootph-pre-ram;
-	};
+&mcu_esm {
+	bootph-pre-ram;
 };
 
-&cbass_main {
-	sa3_secproxy: secproxy@44880000 {
-		bootph-pre-ram;
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "rt", "scfg", "target_data";
-		reg = <0x00 0x44880000 0x00 0x20000>,
-		      <0x0 0x44860000 0x0 0x20000>,
-		      <0x0 0x43600000 0x0 0x10000>;
-	};
+&secure_proxy_sa3 {
+	bootph-pre-ram;
+	/* We require this for boot handshake */
+	status = "okay";
+};
+
+&main_esm {
+	bootph-pre-ram;
+};
 
+&cbass_main {
 	sysctrler: sysctrler {
 		compatible = "ti,am654-system-controller";
-		mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>, <&sa3_secproxy 0>;
+		mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>, <&secure_proxy_sa3 0>;
 		mbox-names = "tx", "rx", "boot_notify";
 		bootph-pre-ram;
 	};
-
-	main_esm: esm@420000 {
-		compatible = "ti,j721e-esm";
-		reg = <0x0 0x420000 0x0 0x1000>;
-		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
-		bootph-pre-ram;
-	};
 };
 
-&mcu_pmx0 {
+&wkup_uart0_pins_default {
 	bootph-pre-ram;
-	wkup_uart0_pins_default: wkup-uart0-pins-default {
-		pinctrl-single,pins = <
-			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6) WKUP_UART0_CTSn */
-			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4) WKUP_UART0_RTSn */
-			AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4) WKUP_UART0_RXD */
-			AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5) WKUP_UART0_TXD */
-		>;
-		bootph-pre-ram;
-	};
 };
 
-&main_pmx0 {
+&main_uart1_pins_default {
 	bootph-pre-ram;
-	main_uart1_pins_default: main-uart1-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
-			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
-			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
-			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
-		>;
-		bootph-pre-ram;
-	};
 };
 
 /* WKUP UART0 is used for DM firmware logs */
 &wkup_uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_uart0_pins_default>;
-	status = "okay";
 	bootph-pre-ram;
 };
 
 /* Main UART1 is used for TIFS firmware logs */
 &main_uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart1_pins_default>;
-	status = "okay";
 	bootph-pre-ram;
 };