Merge tag 'xilinx-for-v2021.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.10-rc3

xilinx:
- Disable CONFIG_ARCH_FIXUP_FDT_MEMORY
- Print information about cpu via soc drivers and enable DISPLAY_CPUINFO
- Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT

zynq:
- Wire single QSPI
- Use power-source instead of io-standard properties
- Enable nor on zc770-xm012

zynqmp:
- Change handling around multi_boot()
- Setup offset for u-boot.itb in spi
- Generate run time dfu_alt_info for capsule update
- Use explicit values for enums (zynqmp_firmware.h)
- Enable RTC/SHA1/BUTTON/BUTTON_GPIO command
- Disable WDT driver by default
- Bind usb/scsi via preboot because of EFI
- DT updates/fixes
- Add soc driver
- Fix SPL SPI boot mode

versal:
- Add soc driver

sdhci:
- Update tap delay programming for zynq_sdhci driver

cmd:
- Fix RTC uclass handling in date command
- Update pwm help message
- Update reset help message

watchdog:
- Fix wwdt compilation

rtc:
- Deal with seq alias in rtc uclass
- Add zynqmp RTC driver

fdt:
- Add kernel-doc for fdt_fixup_memory_banks()

13 files changed, 80 insertions, 36 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 82a0790cc0..fc16a57e60 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1133,7 +1133,7 @@ dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
 targets += $(dtb-y)
 
 # Add any required device tree compiler flags here
-DTC_FLAGS +=
+DTC_FLAGS += -a 0x8
 
 PHONY += dtbs
 dtbs: $(addprefix $(obj)/, $(dtb-y))
diff --git a/arch/arm/dts/zynq-cc108.dts b/arch/arm/dts/zynq-cc108.dts
index 64d73ecbc5..036106e221 100644
--- a/arch/arm/dts/zynq-cc108.dts
+++ b/arch/arm/dts/zynq-cc108.dts
@@ -58,7 +58,7 @@
 	is-dual = <0>;
 	num-cs = <1>;
 	flash@0 { /* 16 MB */
-		compatible = "n25q128a11";
+		compatible = "n25q128a11", "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <50000000>;
 		spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi
index eb0e29e6cb..38410eeca8 100644
--- a/arch/arm/dts/zynq-cse-qspi.dtsi
+++ b/arch/arm/dts/zynq-cse-qspi.dtsi
@@ -60,7 +60,7 @@
 			#size-cells = <0>;
 			num-cs = <1>;
 			flash0: flash@0 {
-				compatible = "n25q128a11";
+				compatible = "n25q128a11", "jedec,spi-nor";
 				reg = <0x0>;
 				spi-tx-bus-width = <1>;
 				spi-rx-bus-width = <4>;
diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts
index ab6bde95fe..c4ec56138e 100644
--- a/arch/arm/dts/zynq-topic-miami.dts
+++ b/arch/arm/dts/zynq-topic-miami.dts
@@ -36,7 +36,7 @@
 	is-dual = <0>;
 	num-cs = <1>;
 	flash@0 {
-		compatible = "st,m25p80", "n25q256a";
+		compatible = "st,m25p80", "n25q256a", "jedec,spi-nor";
 		m25p,fast-read;
 		reg = <0x0>;
 		spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 4474f4bfd7..f2e05a55b9 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -213,7 +213,7 @@
 		conf {
 			groups = "can0_9_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -236,7 +236,7 @@
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -259,7 +259,7 @@
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -277,7 +277,7 @@
 				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
 				 "gpio0_13_grp", "gpio0_14_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -301,7 +301,7 @@
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -314,7 +314,7 @@
 		conf {
 			groups = "gpio0_50_grp", "gpio0_51_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -327,7 +327,7 @@
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -341,7 +341,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -354,7 +354,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -367,7 +367,7 @@
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -390,7 +390,7 @@
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -409,6 +409,14 @@
 &qspi {
 	u-boot,dm-pre-reloc;
 	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
 };
 
 &sdhci0 {
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 84729e9feb..cb919e4053 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -151,7 +151,7 @@
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -174,7 +174,7 @@
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -188,7 +188,7 @@
 		conf {
 			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -212,7 +212,7 @@
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -225,7 +225,7 @@
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -239,7 +239,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -252,7 +252,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -265,7 +265,7 @@
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -288,7 +288,7 @@
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -307,6 +307,14 @@
 &qspi {
 	u-boot,dm-pre-reloc;
 	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
 };
 
 &sdhci0 {
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index c547d7921d..002ff9f7f4 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -62,6 +62,14 @@
 
 &qspi {
 	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
 };
 
 &sdhci0 {
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 0d001c9161..ccf76e7984 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -53,6 +53,15 @@
 	};
 };
 
+&nor0 {
+	status = "okay";
+	bank-width = <1>;
+};
+
+&smcc {
+	status = "okay";
+};
+
 &spi1 {
 	status = "okay";
 	num-cs = <4>;
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 7218ee3ad8..455c8a9610 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -61,6 +61,14 @@
 
 &qspi {
 	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
 };
 
 &spi0 {
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index 4e8086c82f..22602d8c33 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -12,10 +12,10 @@
  * Michal Simek <michal.simek@xilinx.com>
  */
 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/net/ti-dp83867.h>
- #include <dt-bindings/phy/phy.h>
- #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 
 /dts-v1/;
 /plugin/;
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index 048d5665c5..df054e152a 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -7,10 +7,10 @@
  * Michal Simek <michal.simek@xilinx.com>
  */
 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/net/ti-dp83867.h>
- #include <dt-bindings/phy/phy.h>
- #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 
 /dts-v1/;
 /plugin/;
diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts
index b613ab2342..5f55df28f3 100644
--- a/arch/arm/dts/zynqmp-sm-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -60,13 +60,13 @@
 
 	leds {
 		compatible = "gpio-leds";
-		ds35 {
+		ds35-led {
 			label = "heartbeat";
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds36 {
+		ds36-led {
 			label = "vbus_det";
 			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -183,7 +183,7 @@
 	};
 };
 
-&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A*/
+&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
 	status = "okay";
 	non-removable;
 	disable-wp;
@@ -204,17 +204,20 @@
 
 &i2c1 {
 	status = "okay";
+	u-boot,dm-pre-reloc;
 	clock-frequency = <400000>;
 	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
 	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 
 	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+		u-boot,dm-pre-reloc;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x50>;
 		/* WP pin EE_WP_EN connected to slg7x644092@68 */
 	};
 
 	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+		u-boot,dm-pre-reloc;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x51>;
 	};
diff --git a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
index 6ec96e0e8c..300e2ebe96 100644
--- a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
+++ b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
@@ -58,7 +58,7 @@
 	status = "okay";
 	is-dual = <1>;
 	flash@0 {
-		compatible = "st,m25p80", "n25q256a";
+		compatible = "st,m25p80", "n25q256a", "jedec,spi-nor";
 		m25p,fast-read;
 		reg = <0x0>;
 		spi-tx-bus-width = <1>;