arm: mach-k3: am642: Add support for boot device detection

AM642 allows for booting from primary or backup boot media.
Both media can be chosen individually based on switch settings.
ROM looks for a valid image in primary boot media, if not found
then looks in backup boot media. In order to pass this boot media
information to boot loader, ROM stores a value at a particular
address. Add support for reading this information and determining
the boot media correctly.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

5 files changed, 198 insertions, 0 deletions

diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index 79de049d68..54944af258 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <spl.h>
 #include <asm/io.h>
+#include <asm/arch/hardware.h>
 #include "common.h"
 
 #if defined(CONFIG_SPL_BUILD)
@@ -25,4 +26,101 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 }
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+	switch (boot_device) {
+	case BOOT_DEVICE_MMC1:
+		return MMCSD_MODE_EMMCBOOT;
+
+	case BOOT_DEVICE_MMC2:
+		return MMCSD_MODE_FS;
+
+	default:
+		return MMCSD_MODE_RAW;
+	}
+}
+
+static u32 __get_backup_bootmedia(u32 main_devstat)
+{
+	u32 bkup_bootmode =
+	    (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >>
+	    MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT;
+	u32 bkup_bootmode_cfg =
+	    (main_devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >>
+	    MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT;
+
+	switch (bkup_bootmode) {
+	case BACKUP_BOOT_DEVICE_UART:
+		return BOOT_DEVICE_UART;
+
+	case BACKUP_BOOT_DEVICE_USB:
+		return BOOT_DEVICE_USB;
+
+	case BACKUP_BOOT_DEVICE_ETHERNET:
+		return BOOT_DEVICE_ETHERNET;
+
+	case BACKUP_BOOT_DEVICE_MMC:
+		if (bkup_bootmode_cfg)
+			return BOOT_DEVICE_MMC2;
+		return BOOT_DEVICE_MMC1;
+
+	case BACKUP_BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+
+	case BACKUP_BOOT_DEVICE_I2C:
+		return BOOT_DEVICE_I2C;
+	};
+
+	return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 main_devstat)
+{
+	u32 bootmode = (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+	    MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+	u32 bootmode_cfg =
+	    (main_devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >>
+	    MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT;
+
+	switch (bootmode) {
+	case BOOT_DEVICE_OSPI:
+		fallthrough;
+	case BOOT_DEVICE_QSPI:
+		fallthrough;
+	case BOOT_DEVICE_XSPI:
+		fallthrough;
+	case BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+
+	case BOOT_DEVICE_ETHERNET_RGMII:
+		fallthrough;
+	case BOOT_DEVICE_ETHERNET_RMII:
+		return BOOT_DEVICE_ETHERNET;
+
+	case BOOT_DEVICE_EMMC:
+		return BOOT_DEVICE_MMC1;
+
+	case BOOT_DEVICE_MMC:
+		if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >>
+		     MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT)
+			return BOOT_DEVICE_MMC2;
+		return BOOT_DEVICE_MMC1;
+
+	case BOOT_DEVICE_NOBOOT:
+		return BOOT_DEVICE_RAM;
+	}
+
+	return bootmode;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	if (bootindex == K3_PRIMARY_BOOTMODE)
+		return __get_primary_bootmedia(devstat);
+	else
+		return __get_backup_bootmedia(devstat);
+}
 #endif
diff --git a/arch/arm/mach-k3/include/mach/am64_hardware.h b/arch/arm/mach-k3/include/mach/am64_hardware.h
new file mode 100644
index 0000000000..a447f2eae8
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/am64_hardware.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: AM64 SoC definitions, structures etc.
+ *
+ * (C) Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef __ASM_ARCH_AM64_HARDWARE_H
+#define __ASM_ARCH_AM64_HARDWARE_H
+
+#include <config.h>
+
+#define CTRL_MMR0_BASE					0x43000000
+#define CTRLMMR_MAIN_DEVSTAT				(CTRL_MMR0_BASE + 0x30)
+
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK		0x00000078
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT		3
+
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK		0x00000380
+#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT		7
+
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK		0x00001c00
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT		10
+
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK		0x00002000
+#define MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT		13
+
+/* After the cfg mask and shifts have been applied */
+#define MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT		2
+#define MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK		0x04
+
+/*
+ * The CTRL_MMR memory space is divided into several equally-spaced
+ * partitions, so defining the partition size allows us to determine
+ * register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE			0x4000
+
+/*
+ * CTRL_MMR lock/kick-mechanism shared register definitions.
+ */
+#define CTRLMMR_LOCK_KICK0				0x01008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL			0x68ef3490
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK		BIT(0)
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT		0
+#define CTRLMMR_LOCK_KICK1				0x0100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
+
+#endif /* __ASM_ARCH_DRA8_HARDWARE_H */
diff --git a/arch/arm/mach-k3/include/mach/am64_spl.h b/arch/arm/mach-k3/include/mach/am64_spl.h
new file mode 100644
index 0000000000..36826cfc4e
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/am64_spl.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ *	Keerthy <j-keerthy@ti.com>
+ */
+#ifndef _ASM_ARCH_AM64_SPL_H_
+#define _ASM_ARCH_AM64_SPL_H_
+
+/* Primary BootMode devices */
+#define BOOT_DEVICE_RAM			0x00
+#define BOOT_DEVICE_OSPI		0x01
+#define BOOT_DEVICE_QSPI		0x02
+#define BOOT_DEVICE_SPI			0x03
+#define BOOT_DEVICE_ETHERNET		0x04
+#define BOOT_DEVICE_ETHERNET_RGMII	0x04
+#define BOOT_DEVICE_ETHERNET_RMII	0x05
+#define BOOT_DEVICE_I2C			0x06
+#define BOOT_DEVICE_UART		0x07
+#define BOOT_DEVICE_MMC			0x08
+#define BOOT_DEVICE_EMMC		0x09
+
+#define BOOT_DEVICE_USB			0x0A
+#define BOOT_DEVICE_GPMC_NOR		0x0C
+#define BOOT_DEVICE_PCIE		0x0D
+#define BOOT_DEVICE_XSPI		0x0E
+
+#define BOOT_DEVICE_NOBOOT		0x0F
+
+#define BOOT_DEVICE_MMC2		0x08
+#define BOOT_DEVICE_MMC1		0x09
+/* INVALID */
+#define BOOT_DEVICE_MMC2_2		0x1F
+
+/* Backup BootMode devices */
+#define BACKUP_BOOT_DEVICE_USB		0x01
+#define BACKUP_BOOT_DEVICE_UART		0x03
+#define BACKUP_BOOT_DEVICE_ETHERNET	0x04
+#define BACKUP_BOOT_DEVICE_MMC		0x05
+#define BACKUP_BOOT_DEVICE_SPI		0x06
+#define BACKUP_BOOT_DEVICE_I2C		0x07
+
+#define K3_PRIMARY_BOOTMODE		0x0
+
+#endif
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index 02b3df0e1b..8725e7d51a 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -14,6 +14,10 @@
 #include "j721e_hardware.h"
 #endif
 
+#ifdef CONFIG_SOC_K3_AM642
+#include "am64_hardware.h"
+#endif
+
 /* Assuming these addresses and definitions stay common across K3 devices */
 #define CTRLMMR_WKUP_JTAG_ID	0x43000014
 #define JTAG_ID_VARIANT_SHIFT	28
diff --git a/arch/arm/mach-k3/include/mach/spl.h b/arch/arm/mach-k3/include/mach/spl.h
index a26c8ecdd5..ef1c3fb8ca 100644
--- a/arch/arm/mach-k3/include/mach/spl.h
+++ b/arch/arm/mach-k3/include/mach/spl.h
@@ -13,4 +13,8 @@
 #ifdef CONFIG_SOC_K3_J721E
 #include "j721e_spl.h"
 #endif
+
+#ifdef CONFIG_SOC_K3_AM642
+#include "am64_spl.h"
+#endif
 #endif /* _ASM_ARCH_SPL_H_ */