diff options
| author | Lokesh Vutla <lokeshvutla@ti.com> | 2016-11-23 10:55:28 +0300 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-12-04 21:54:51 +0300 |
| commit | b4b060066f158a461780dfb06a042bb6351a2b3c (patch) | |
| tree | 702244a6706fefa39a458eac01d9377217c74eb0 /arch/arm/mach-omap2/omap5 | |
| parent | f56e63509985d23e8912beaf3c38b07f7a1b12c6 (diff) | |
| download | u-boot-b4b060066f158a461780dfb06a042bb6351a2b3c.tar.xz | |
ARM: OMAP4+: Add support for getting pbias info from board
Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based
boards to enable mmc regulator. This is not true always like in case of
DRA71x-evm. So get this information based on the board.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/mach-omap2/omap5')
| -rw-r--r-- | arch/arm/mach-omap2/omap5/hwinit.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c index e3ac8bbe95..839d79d102 100644 --- a/arch/arm/mach-omap2/omap5/hwinit.c +++ b/arch/arm/mach-omap2/omap5/hwinit.c @@ -13,6 +13,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <palmas.h> #include <asm/armv7.h> #include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> @@ -451,3 +452,36 @@ void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb, #endif omap_smc1(OMAP5_SERVICE_ACR_SET, acr); } + +#if defined(CONFIG_PALMAS_POWER) +void vmmc_pbias_config(uint voltage) +{ + u32 value = 0; + struct vcores_data const *vcores = *omap_vcores; + + value = readl((*ctrl)->control_pbias); + value &= ~SDCARD_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(10); /* wait 10 us */ + value &= ~SDCARD_BIAS_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + + if (vcores->core.pmic->i2c_slave_addr == 0x60) { + if (voltage == LDO_VOLT_3V0) + voltage = 0x19; + else if (voltage == LDO_VOLT_1V8) + voltage = 0xa; + lp873x_mmc1_poweron_ldo(voltage); + } else { + palmas_mmc1_poweron_ldo(voltage); + } + + value = readl((*ctrl)->control_pbias); + value |= SDCARD_BIAS_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(150); /* wait 150 us */ + value |= SDCARD_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(150); /* wait 150 us */ +} +#endif |