diff options
| author | Kever Yang <kever.yang@rock-chips.com> | 2019-03-29 04:09:00 +0300 |
|---|---|---|
| committer | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2019-05-01 10:40:58 +0300 |
| commit | 7f3eec03d59a0532579ba364e0ba1381feafb814 (patch) | |
| tree | ab27d3ffad56282b9f96af68ced5815252494637 /arch/arm/mach-rockchip/rk3036 | |
| parent | 2b2ff1bd87d8912267b9f3b408e2aaad0cd195fa (diff) | |
| download | u-boot-7f3eec03d59a0532579ba364e0ba1381feafb814.tar.xz | |
rockchip: rk3036: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed whitespace error:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Diffstat (limited to 'arch/arm/mach-rockchip/rk3036')
| -rw-r--r-- | arch/arm/mach-rockchip/rk3036/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3036/rk3036.c | 38 |
2 files changed, 39 insertions, 0 deletions
diff --git a/arch/arm/mach-rockchip/rk3036/Makefile b/arch/arm/mach-rockchip/rk3036/Makefile index 20d28f7c21..299fc50635 100644 --- a/arch/arm/mach-rockchip/rk3036/Makefile +++ b/arch/arm/mach-rockchip/rk3036/Makefile @@ -10,4 +10,5 @@ ifndef CONFIG_SPL_BUILD obj-y += syscon_rk3036.o endif +obj-y += rk3036.o obj-y += sdram_rk3036.o diff --git a/arch/arm/mach-rockchip/rk3036/rk3036.c b/arch/arm/mach-rockchip/rk3036/rk3036.c new file mode 100644 index 0000000000..481af8a934 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3036/rk3036.c @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ +#include <asm/io.h> +#include <asm/arch-rockchip/grf_rk3036.h> +#include <asm/arch-rockchip/hardware.h> + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ +#define GRF_BASE 0x20008000 + struct rk3036_grf * const grf = (void *)GRF_BASE; + enum { + GPIO1C3_SHIFT = 6, + GPIO1C3_MASK = 3 << GPIO1C3_SHIFT, + GPIO1C3_GPIO = 0, + GPIO1C3_MMC0_D1, + GPIO1C3_UART2_SOUT, + + GPIO1C2_SHIFT = 4, + GPIO1C2_MASK = 3 << GPIO1C2_SHIFT, + GPIO1C2_GPIO = 0, + GPIO1C2_MMC0_D0, + GPIO1C2_UART2_SIN, + }; + /* + * NOTE: sd card and debug uart use same iomux in rk3036, + * so if you enable uart, + * you can not boot from sdcard + */ + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C3_MASK << GPIO1C3_SHIFT | + GPIO1C2_MASK << GPIO1C2_SHIFT, + GPIO1C3_UART2_SOUT << GPIO1C3_SHIFT | + GPIO1C2_UART2_SIN << GPIO1C2_SHIFT); +} +#endif |