diff options
author | Kun-Hua Huang <kunhua@andestech.com> | 2015-08-24 09:52:36 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-08-28 18:46:35 +0300 |
commit | b3537c08e14b9d7e3b3207de2d280dab2dc499fa (patch) | |
tree | 8a6365c85b83f9ecc66b29e09de00b8ec6cc0d46 /arch/nds32/cpu | |
parent | 2e88bb28d8061286d2f1cabcac224df15b941b82 (diff) | |
download | u-boot-b3537c08e14b9d7e3b3207de2d280dab2dc499fa.tar.xz |
NDS32: Generic Board Support and Unsupport
Remove ag101 and ag102 support
Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
Diffstat (limited to 'arch/nds32/cpu')
-rw-r--r-- | arch/nds32/cpu/n1213/ag102/Makefile | 21 | ||||
-rw-r--r-- | arch/nds32/cpu/n1213/ag102/cpu.c | 67 | ||||
-rw-r--r-- | arch/nds32/cpu/n1213/ag102/lowlevel_init.S | 307 | ||||
-rw-r--r-- | arch/nds32/cpu/n1213/ag102/timer.c | 191 | ||||
-rw-r--r-- | arch/nds32/cpu/n1213/ag102/watchdog.S | 33 |
5 files changed, 0 insertions, 619 deletions
diff --git a/arch/nds32/cpu/n1213/ag102/Makefile b/arch/nds32/cpu/n1213/ag102/Makefile deleted file mode 100644 index c21ce02828..0000000000 --- a/arch/nds32/cpu/n1213/ag102/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# Copyright (C) 2011 Andes Technology Corporation -# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> -# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cpu.o timer.o - -ifndef CONFIG_SKIP_LOWLEVEL_INIT -obj-y += lowlevel_init.o -endif - -ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG -obj-y += watchdog.o -endif diff --git a/arch/nds32/cpu/n1213/ag102/cpu.c b/arch/nds32/cpu/n1213/ag102/cpu.c deleted file mode 100644 index 2ee45d21c6..0000000000 --- a/arch/nds32/cpu/n1213/ag102/cpu.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> - * - * Copyright (C) 2011 Andes Technology Corporation - * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* CPU specific code */ -#include <common.h> -#include <command.h> -#include <watchdog.h> -#include <asm/cache.h> - -#include <faraday/ftwdt010_wdt.h> - -/* - * cleanup_before_linux() is called just before we call linux - * it prepares the processor for linux - * - * we disable interrupt and caches. - */ -int cleanup_before_linux(void) -{ - disable_interrupts(); - -#ifdef CONFIG_MMU - /* turn off I/D-cache */ - icache_disable(); - dcache_disable(); - - /* flush I/D-cache */ - invalidate_icac(); - invalidate_dcac(); -#endif - - return 0; -} - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - disable_interrupts(); - - /* - * reset to the base addr of andesboot. - * currently no ROM loader at addr 0. - * do not use reset_cpu(0); - */ -#ifdef CONFIG_FTWDT010_WATCHDOG - /* - * workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead - * automatic hardware reset when booting Linux. - * Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here. - */ - ftwdt010_wdt_reset(); -#endif /* CONFIG_FTWDT010_WATCHDOG */ - hang(); - - /*NOTREACHED*/ -} diff --git a/arch/nds32/cpu/n1213/ag102/lowlevel_init.S b/arch/nds32/cpu/n1213/ag102/lowlevel_init.S deleted file mode 100644 index 238410dde4..0000000000 --- a/arch/nds32/cpu/n1213/ag102/lowlevel_init.S +++ /dev/null @@ -1,307 +0,0 @@ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.text - -#include <common.h> -#include <config.h> - -#include <asm/macro.h> -#include <generated/asm-offsets.h> - -/* - * parameters for Synopsys DWC DDR2/DDR1 Memory Controller - */ -#define DDR2C_BASE_A (CONFIG_DWCDDR21MCTL_BASE) -#define DDR2C_CCR_A (DDR2C_BASE_A + DWCDDR21MCTL_CCR) -#define DDR2C_DCR_A (DDR2C_BASE_A + DWCDDR21MCTL_DCR) -#define DDR2C_IOCR_A (DDR2C_BASE_A + DWCDDR21MCTL_IOCR) -#define DDR2C_CSR_A (DDR2C_BASE_A + DWCDDR21MCTL_CSR) -#define DDR2C_DRR_A (DDR2C_BASE_A + DWCDDR21MCTL_DRR) -#define DDR2C_DLLCR0_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR0) -#define DDR2C_DLLCR1_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR1) -#define DDR2C_DLLCR2_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR2) -#define DDR2C_DLLCR3_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR3) -#define DDR2C_DLLCR4_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR4) -#define DDR2C_DLLCR5_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR5) -#define DDR2C_DLLCR6_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR6) -#define DDR2C_DLLCR7_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR7) -#define DDR2C_DLLCR8_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR8) -#define DDR2C_DLLCR9_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR9) -#define DDR2C_RSLR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RSLR0) -#define DDR2C_RDGR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RDGR0) -#define DDR2C_DTAR_A (DDR2C_BASE_A + DWCDDR21MCTL_DTAR) -#define DDR2C_MR_A (DDR2C_BASE_A + DWCDDR21MCTL_MR) - -#define DDR2C_CCR_D CONFIG_SYS_DWCDDR21MCTL_CCR -#define DDR2C_CCR_D2 CONFIG_SYS_DWCDDR21MCTL_CCR2 -#define DDR2C_DCR_D CONFIG_SYS_DWCDDR21MCTL_DCR -#define DDR2C_IOCR_D CONFIG_SYS_DWCDDR21MCTL_IOCR -#define DDR2C_CSR_D CONFIG_SYS_DWCDDR21MCTL_CSR -#define DDR2C_DRR_D CONFIG_SYS_DWCDDR21MCTL_DRR -#define DDR2C_RSLR0_D CONFIG_SYS_DWCDDR21MCTL_RSLR0 -#define DDR2C_RDGR0_D CONFIG_SYS_DWCDDR21MCTL_RDGR0 -#define DDR2C_DTAR_D CONFIG_SYS_DWCDDR21MCTL_DTAR -#define DDR2C_MR_D CONFIG_SYS_DWCDDR21MCTL_MR - -#define DDR2C_DLLCR0_D CONFIG_SYS_DWCDDR21MCTL_DLLCR0 /* 0-9 are same */ - -/* - * parameters for the ahbc controller - */ -#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR) -#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6) - -#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 - -/* - * parameters for the ANDES PCU controller - */ -#define PCU_PCS4_A (CONFIG_ANDES_PCU_BASE + ANDES_PCU_PCS4) -#define PCU_PCS4_D CONFIG_SYS_ANDES_CPU_PCS4 - -/* - * numeric 7 segment display - */ -.macro led, num - write32 CONFIG_DEBUG_LED, \num -.endm - -/* - * Waiting for SDRAM to set up - */ -/* -.macro wait_sdram - li $r0, DDR2C_CSR_A -1: - lwi $r1, [$r0+FTSDMC021_CR2] - bnez $r1, 1b -.endm -*/ - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -.globl lowlevel_init -lowlevel_init: - move $r10, $lp - - /* U200 */ -! led 0x00 -! jal scale_to_500mhz - - led 0x10 - jal mem_init - - led 0x20 - jal remap - -#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) - led 0x2f - jal enable_fpu -#endif - - led 0x30 - ret $r10 - -scale_to_500mhz: - move $r11, $lp - - /* - * scale to 500Mhz - */ - led 0x01 - write32 PCU_PCS4_A, 0x1102000f ! save data to PCS4 - - move $lp, $r11 - ret - -mem_init: - move $r11, $lp - - /* - * config AHB Controller - */ - led 0x12 - write32 AHBC_BSR6_A, AHBC_BSR6_D - - /* - * config Synopsys DWC DDR2/DDR1 Memory Controller - */ -ddr2c_init: -set_dcr: - led 0x14 - write32 DDR2C_DCR_A, DDR2C_DCR_D ! 0x000020d4 - -auto_sizing: - /* - * ebios: $r10->$r7, $r11->$r8, $r12->$r9, $r13->$r12, $r14->$r13 - */ -set_iocr: - led 0x19 - write32 DDR2C_IOCR_A, DDR2C_IOCR_D -set_drr: - led 0x16 - write32 DDR2C_DRR_A, DDR2C_DRR_D ! 0x00034812 -set_dllcr: - led 0x18 - write32 DDR2C_DLLCR0_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR1_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR2_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR3_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR4_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR5_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR6_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR7_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR8_A, DDR2C_DLLCR0_D - write32 DDR2C_DLLCR9_A, DDR2C_DLLCR0_D -set_rslr0: - write32 DDR2C_RSLR0_A, DDR2C_RSLR0_D ! 0x00000040 -set_rdgr0: - write32 DDR2C_RDGR0_A, DDR2C_RDGR0_D ! 0x000055cf -set_dtar: - led 0x15 - write32 DDR2C_DTAR_A, DDR2C_DTAR_D ! 0x00100000 -set_mode: - led 0x17 - write32 DDR2C_MR_A, DDR2C_MR_D ! 0x00000852 -set_ccr: - write32 DDR2C_CCR_A, DDR2C_CCR_D - -#ifdef TRIGGER_INIT: -trigger_init: - write32 DDR2C_CCR_A, DDR2C_CCR_D ! 0x80020000 - - /* Wait for ddr init state to be set */ - msync ALL - isb - - /* Wait until the config initialization is finish */ -1: - la $r4, DDR2C_CSR_A - lwi $r5, [$r4] - srli $r5, $r5, 23 - bnez $r5, 1b -#endif - -data_training: -! write32 DDR2C_CCR_A, DDR2C_CCR_D2 ! 0x40020004 - - /* Wait for ddr init state to be set */ - msync ALL - isb - - /* wait until the ddr data trainning is complete */ -1: - la $r4, DDR2C_CSR_A - lwi $r5, [$r4] - srli $r6, $r5, 23 - bnez $r6, 1b - - lwi $r1, [$r4] - srli $r6, $r5, 20 - li $r5, 0x00ffffff - swi $r1, [$r4] - bnez $r6, ddr2c_init - - led 0x1a - move $lp, $r11 - ret - -remap: - move $r11, $lp -#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */ - bal 2f -relo_base: - move $r0, $lp -#else -relo_base: - mfusr $r0, $pc -#endif /* __NDS32_N1213_43U1H__ */ - - /* - * Remapping - */ -#ifdef CONFIG_MEM_REMAP - /* - * Copy ROM code to SDRAM base for memory remap layout. - * This is not the real relocation, the real relocation is the function - * relocate_code() is start.S which supports the systems is memory - * remapped or not. - */ - /* - * Doing memory remap is essential for preparing some non-OS or RTOS - * applications. - * - * This is also a must on ADP-AG101 board. - * The reason is because the ROM/FLASH circuit on PCB board. - * AG101-A0 board has 2 jumpers MA17 and SW5 to configure which - * ROM/FLASH is used to boot. - * - * When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0, - * and the FLASH is connected to BANK1. - * When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0), - * and the FLASH is connected to BANK0. - * It will occur problem when doing flash probing if the flash is at - * BANK0 (0x00000000) while memory remapping was skipped. - * - * Other board like ADP-AG101P may not enable this since there is only - * a FLASH connected to bank0. - */ - led 0x21 - li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */ - li $r5, 0x0 - la $r1, relo_base /* get $pc or $lp */ - sub $r2, $r0, $r1 - sethi $r6, hi20(_end) - ori $r6, $r6, lo12(_end) - add $r6, $r6, $r2 -1: - lwi.p $r7, [$r5], #4 - swi.p $r7, [$r4], #4 - blt $r5, $r6, 1b - - /* set remap bit */ - /* - * MEM remap bit is operational - * - use it to map writeable memory at 0x00000000, in place of flash - * - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff - * - after remap: flash/rom 0x80000000, sdram: 0x00000000 - */ - led 0x2c - setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1 - -#endif /* #ifdef CONFIG_MEM_REMAP */ - move $lp, $r11 -2: - ret - - /* - * enable_fpu: - * Some of Andes CPU version support FPU coprocessor, if so, - * and toolchain support FPU instruction set, we should enable it. - */ -#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) -enable_fpu: - mfsr $r0, $CPU_VER /* enable FPU if it exists */ - srli $r0, $r0, 3 - andi $r0, $r0, 1 - beqz $r0, 1f /* skip if no COP */ - mfsr $r0, $FUCOP_EXIST - srli $r0, $r0, 31 - beqz $r0, 1f /* skip if no FPU */ - mfsr $r0, $FUCOP_CTL - ori $r0, $r0, 1 - mtsr $r0, $FUCOP_CTL -1: - ret -#endif - -.globl show_led -show_led: - li $r8, (CONFIG_DEBUG_LED) - swi $r7, [$r8] - ret -#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/arch/nds32/cpu/n1213/ag102/timer.c b/arch/nds32/cpu/n1213/ag102/timer.c deleted file mode 100644 index 758b354110..0000000000 --- a/arch/nds32/cpu/n1213/ag102/timer.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * Copyright (C) 2011 Andes Technology Corporation - * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <faraday/fttmr010.h> - -static ulong timestamp; -static ulong lastdec; - -int timer_init(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - unsigned int cr; - - debug("%s()\n", __func__); - - /* disable timers */ - writel(0, &tmr->cr); - -#ifdef CONFIG_FTTMR010_EXT_CLK - /* use 32768Hz oscillator for RTC, WDT, TIMER */ - ftpmu010_32768osc_enable(); -#endif - - /* setup timer */ - writel(TIMER_LOAD_VAL, &tmr->timer3_load); - writel(TIMER_LOAD_VAL, &tmr->timer3_counter); - writel(0, &tmr->timer3_match1); - writel(0, &tmr->timer3_match2); - - /* we don't want timer to issue interrupts */ - writel(FTTMR010_TM3_MATCH1 | - FTTMR010_TM3_MATCH2 | - FTTMR010_TM3_OVERFLOW, - &tmr->interrupt_mask); - - cr = readl(&tmr->cr); -#ifdef CONFIG_FTTMR010_EXT_CLK - cr |= FTTMR010_TM3_CLOCK; /* use external clock */ -#endif - cr |= FTTMR010_TM3_ENABLE; - writel(cr, &tmr->cr); - - /* init the timestamp and lastdec value */ - reset_timer_masked(); - - return 0; -} - -/* - * timer without interrupts - */ - -/* - * reset time - */ -void reset_timer_masked(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - - /* capure current decrementer value time */ -#ifdef CONFIG_FTTMR010_EXT_CLK - lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); -#else - lastdec = readl(&tmr->timer3_counter) / - (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ); -#endif - timestamp = 0; /* start "advancing" time stamp from 0 */ - - debug("%s(): lastdec = %lx\n", __func__, lastdec); -} - -void reset_timer(void) -{ - debug("%s()\n", __func__); - reset_timer_masked(); -} - -/* - * return timer ticks - */ -ulong get_timer_masked(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - - /* current tick value */ -#ifdef CONFIG_FTTMR010_EXT_CLK - ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); -#else - ulong now = readl(&tmr->timer3_counter) / - (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ); -#endif - - debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); - - if (lastdec >= now) { - /* - * normal mode (non roll) - * move stamp fordward with absoulte diff ticks - */ - timestamp += lastdec - now; - } else { - /* - * we have overflow of the count down timer - * - * nts = ts + ld + (TLV - now) - * ts=old stamp, ld=time that passed before passing through -1 - * (TLV-now) amount of time after passing though -1 - * nts = new "advancing time stamp"...it could also roll and - * cause problems. - */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - - lastdec = now; - - debug("%s() returns %lx\n", __func__, timestamp); - - return timestamp; -} - -/* - * return difference between timer ticks and base - */ -ulong get_timer(ulong base) -{ - debug("%s(%lx)\n", __func__, base); - return get_timer_masked() - base; -} - -void set_timer(ulong t) -{ - debug("%s(%lx)\n", __func__, t); - timestamp = t; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay(unsigned long usec) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - -#ifdef CONFIG_FTTMR010_EXT_CLK - long tmo = usec * (TIMER_CLOCK / 1000) / 1000; -#else - long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000; -#endif - unsigned long now, last = readl(&tmr->timer3_counter); - - debug("%s(%lu)\n", __func__, usec); - while (tmo > 0) { - now = readl(&tmr->timer3_counter); - if (now > last) /* count down timer overflow */ - tmo -= TIMER_LOAD_VAL + last - now; - else - tmo -= last - now; - last = now; - } -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - debug("%s()\n", __func__); - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - debug("%s()\n", __func__); -#ifdef CONFIG_FTTMR010_EXT_CLK - return CONFIG_SYS_HZ; -#else - return CONFIG_SYS_CLK_FREQ; -#endif -} diff --git a/arch/nds32/cpu/n1213/ag102/watchdog.S b/arch/nds32/cpu/n1213/ag102/watchdog.S deleted file mode 100644 index 8f450af13d..0000000000 --- a/arch/nds32/cpu/n1213/ag102/watchdog.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch-ag102/ag102.h> -#include <linux/linkage.h> - -.text - -#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG -ENTRY(turnoff_watchdog) - -#define WD_CR 0xC -#define WD_ENABLE 0x1 - - ! Turn off the watchdog, according to Faraday FTWDT010 spec - li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR - lwi $p1, [$p0] ! Get the config of WD - andi $p1, $p1, 0x1f ! Wipe out useless bits - li $r0, ~WD_ENABLE - and $p1, $p1, $r0 ! Set WD disable - sw $p1, [$p0] ! Write back to WD CR - - ! Disable Interrupts by clear GIE in $PSW reg - setgie.d - - ret - -ENDPROC(turnoff_watchdog) -#endif |