diff options
author | Michal Simek <michal.simek@xilinx.com> | 2020-02-14 16:19:56 +0300 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2020-04-06 13:51:31 +0300 |
commit | 5df63a60aa3b509382d11c9115f22b54f86eef05 (patch) | |
tree | 306b132bd49c1da750493ef6537e9f4c00914058 /arch | |
parent | 04437dea7c908c99edb98de7f485f0175d9bc48d (diff) | |
download | u-boot-5df63a60aa3b509382d11c9115f22b54f86eef05.tar.xz |
arm64: zynqmp: Fix addresses in partition definitions
Node name should be <name>@<address> which is not how partitions are
described.
Issue was found by running dtbs_check as:
flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot',
'partition@qspi-linux', 'partition@qspi-rootfs'
do not match any of the regexes: ...
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/dts/zynqmp-zc1232-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zc1254-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu102-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu104-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu104-revC.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu106-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu111-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu1275-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-zcu1275-revB.dts | 8 |
11 files changed, 44 insertions, 44 deletions
diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts index 87152afc32..afb3e96520 100644 --- a/arch/arm/dts/zynqmp-zc1232-revA.dts +++ b/arch/arm/dts/zynqmp-zc1232-revA.dts @@ -48,19 +48,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts index d6b2834f3a..9cc1c0c6c5 100644 --- a/arch/arm/dts/zynqmp-zc1254-revA.dts +++ b/arch/arm/dts/zynqmp-zc1254-revA.dts @@ -48,19 +48,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index fa3824d2a1..0805b93c4a 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -108,19 +108,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts index 6655b86a80..9b38b8b919 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts @@ -187,19 +187,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index fd6dfdd3c2..d250681600 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -614,19 +614,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 6375b47ff8..3ceb39dce0 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -209,19 +209,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index 425d7605bf..7dad4523de 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -222,19 +222,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index a5c4309f2f..221685fd23 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -612,19 +612,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index 755c30e9ff..d16bf8ac7a 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -525,19 +525,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts index 8755bc433b..cdd5c34187 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts @@ -49,19 +49,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts index 16f609c7e5..430fc5adb4 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revB.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts @@ -50,19 +50,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; |