diff options
author | Frank Wunderlich <frank-w@public-files.de> | 2020-08-13 11:20:48 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-08-20 00:38:15 +0300 |
commit | 7cf8537d5e30f23759c36af58259c6b11db15908 (patch) | |
tree | 796a7c6bd4b634d133198327b64313a13a44420a /arch | |
parent | 38bff327d7e320671b051440d73a0f6613203ade (diff) | |
download | u-boot-7cf8537d5e30f23759c36af58259c6b11db15908.tar.xz |
dts: r64: add sata- and asm_sel nodes
asm_sel is for switching between sata and pcie mode
on r64 there is GPIO90 connected to ASM1480 which
switches RX/TX pairs to PCIe/SATA connector
output-low means sata-controller is active
with 2020-10 now reg is also needed for the phy itself
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/dts/mt7622-bpi-r64.dts | 9 | ||||
-rw-r--r-- | arch/arm/dts/mt7622.dtsi | 32 |
2 files changed, 41 insertions, 0 deletions
diff --git a/arch/arm/dts/mt7622-bpi-r64.dts b/arch/arm/dts/mt7622-bpi-r64.dts index c89e816878..51287cea3a 100644 --- a/arch/arm/dts/mt7622-bpi-r64.dts +++ b/arch/arm/dts/mt7622-bpi-r64.dts @@ -235,3 +235,12 @@ full-duplex; }; }; + +&gpio { + /*gpio 90 for setting mode to sata*/ + asm_sel { + gpio-hog; + gpios = <90 GPIO_ACTIVE_HIGH>; + output-low; + }; +}; diff --git a/arch/arm/dts/mt7622.dtsi b/arch/arm/dts/mt7622.dtsi index fec071643e..c43ad65702 100644 --- a/arch/arm/dts/mt7622.dtsi +++ b/arch/arm/dts/mt7622.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/power/mt7629-power.h> #include <dt-bindings/reset/mt7629-reset.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { compatible = "mediatek,mt7622"; @@ -270,6 +271,37 @@ }; }; + sata: sata@1a200000 { + compatible = "mediatek,mtk-ahci"; + reg = <0x1a200000 0x1100>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + ports-implemented = <0x1>; + phys = <&sata_port PHY_TYPE_SATA>; + phy-names = "sata-phy"; + status = "okay"; + }; + + sata_phy: sata-phy@1a243000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0x1a243000 0x0100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "okay"; + + sata_port: sata-phy@1a243000 { + reg = <0x1a243000 0x0100>; + clocks = <&topckgen CLK_TOP_ETH_500M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + ethsys: syscon@1b000000 { compatible = "mediatek,mt7622-ethsys", "syscon"; reg = <0x1b000000 0x1000>; |