ARM: dts: rockchip: update rk3188-radxarock.dts

In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-radxarock-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

2 files changed, 73 insertions, 53 deletions

diff --git a/arch/arm/dts/rk3188-radxarock-u-boot.dtsi b/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
index 204bb3a90e..9c9016de1b 100644
--- a/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
+++ b/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
@@ -5,36 +5,58 @@
 
 #include "rk3188-u-boot.dtsi"
 
+/ {
+	chosen {
+/*		stdout-path = &uart2; */
+		stdout-path = "serial2:115200n8";
+	};
+
+	config {
+		u-boot,boot-led = "rock:red:power";
+		u-boot,dm-pre-reloc;
+	};
+};
+
 &cru {
 	u-boot,dm-spl;
 };
 
-&pinctrl {
-	u-boot,dm-spl;
+&dmc {
+	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+		0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+		0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+		0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+		0x4 0x0>;
+	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+		0x220 0x40 0x0 0x0>;
+	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
 };
 
-&mmc0 {
+&emmc {
 	fifo-mode;
 	max-frequency = <16000000>;
 };
 
-&mmc1 {
+&mmc0 {
 	fifo-mode;
 	max-frequency = <16000000>;
 };
 
-&emmc {
+&mmc1 {
 	fifo-mode;
 	max-frequency = <16000000>;
 };
 
-&uart2 {
-	status = "okay";
+&pinctrl {
 	u-boot,dm-spl;
 };
 
 &timer3 {
 	compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
-	u-boot,dm-spl;
 	clock-frequency = <24000000>;
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
 };
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index 10527a052d..e7138a4ae0 100644
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
  */
@@ -16,17 +16,7 @@
 		mmc0 = &mmc0;
 	};
 
-	chosen {
-/*		stdout-path = &uart2; */
-		stdout-path = "serial2:115200n8";
-	};
-
-	config {
-		u-boot,dm-pre-reloc;
-		u-boot,boot-led = "rock:red:power";
-	};
-
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
@@ -36,7 +26,7 @@
 		autorepeat;
 
 		power {
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
@@ -48,21 +38,21 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green {
+		green_led: led-0 {
 			label = "rock:green:user1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blue {
+		blue_led: led-1 {
 			label = "rock:blue:user2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sleep {
+		sleep_led: led-2 {
 			label = "rock:red:power";
-			gpios = <&gpio0 15 0>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
@@ -84,7 +74,7 @@
 
 	ir_recv: gpio-ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 10 1>;
+		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ir_recv_pin>;
 	};
@@ -92,7 +82,7 @@
 	vcc_otg: usb-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&otg_vbus_drv>;
 		regulator-name = "otg-vbus";
@@ -107,7 +97,7 @@
 		regulator-name = "sdmmc-supply";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_pwr>;
 		startup-delay-us = <100000>;
@@ -117,7 +107,7 @@
 	vcc_host: usb-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&host_vbus_drv>;
 		regulator-name = "host-pwr";
@@ -136,17 +126,6 @@
 	};
 };
 
-&dmc {
-	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
-		0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
-		0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
-		0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
-		0x4 0x0>;
-	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
-		0x220 0x40 0x0 0x0>;
-	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
-};
-
 &emac {
 	status = "okay";
 
@@ -159,12 +138,28 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 &cpu0 {
-	cpu0-supply = <&vdd_arm>;
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gpu {
+	status = "okay";
 };
 
 &i2c1 {
@@ -175,7 +170,7 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rtc_int>;
 		#clock-cells = <0>;
@@ -287,7 +282,6 @@
 };
 
 &mmc0 {
-	num-slots = <1>;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
@@ -318,40 +312,40 @@
 
 	act8846 {
 		act8846_dvs0_ctl: act8846-dvs0-ctl {
-			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+			rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
 		};
 	};
 
 	hym8563 {
 		rtc_int: rtc-int {
-			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	lan8720a  {
 		phy_int: phy-int {
-			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	ir-receiver {
 		ir_recv_pin: ir-recv-pin {
-			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	sd0 {
 		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb {
 		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 		otg_vbus_drv: otg-vbus-drv {
-			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
@@ -368,6 +362,10 @@
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+};
+
 &uart3 {
 	status = "okay";
 };