Merge tag 'u-boot-imx-20210717' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX
----

- mx7ulp : fix  WDOG
- imx8 : Phytec
- USB3 support for i.MX8

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277

16 files changed, 1633 insertions, 199 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 708ce2d094..90e3004dbe 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -867,6 +867,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mm-venice-gw71xx-0x.dtb \
 	imx8mm-venice-gw72xx-0x.dtb \
 	imx8mm-venice-gw73xx-0x.dtb \
+	imx8mm-venice-gw7901.dtb \
 	imx8mm-verdin.dtb \
 	phycore-imx8mm.dtb \
 	imx8mn-ddr4-evk.dtb \
diff --git a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi
new file mode 100644
index 0000000000..6992d91798
--- /dev/null
+++ b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c2 {
+	u-boot,dm-spl;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <1>;
+};
+
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx8mm-venice-gw7901.dts b/arch/arm/dts/imx8mm-venice-gw7901.dts
new file mode 100644
index 0000000000..124e1e4e70
--- /dev/null
+++ b/arch/arm/dts/imx8mm-venice-gw7901.dts
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7901 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led01_red";
+			gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led02_red";
+			gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led03_red";
+			gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led04_red";
+			gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led05_red";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-a {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	regulator-ioexp {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ioexp>;
+		compatible = "regulator-fixed";
+		regulator-name = "ioexp";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	regulator-isouart {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_isouart>;
+		compatible = "regulator-fixed";
+		regulator-name = "iso_uart";
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_usb2_vbus";
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wifi";
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		status = "okay";
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin_aux1";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_aux2";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_0p95";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_arm";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p2";
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	leds_gpio: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		pinctrl-0 = <&pinctrl_ksz>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				label = "lan1";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&sw_phy0>;
+				phy-mode = "internal";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				label = "lan2";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&sw_phy1>;
+				phy-mode = "internal";
+			};
+
+			lan3: port@2 {
+				reg = <2>;
+				label = "lan3";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&sw_phy2>;
+				phy-mode = "internal";
+			};
+
+			lan4: port@3 {
+				reg = <3>;
+				label = "lan4";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&sw_phy3>;
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&fec1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdios {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				reg = <0>;
+				compatible = "microchip,ksz-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sw_phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sw_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sw_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sw_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+		};
+	};
+
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
+	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x40000041 /* SIM2DET# */
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x40000041 /* SIM1DET# */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* SIM2SEL */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_ksz: kszgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x41
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x41 /* RST# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x41
+		>;
+	};
+
+	pinctrl_reg_isouart: regisouartgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041
+		>;
+	};
+
+	pinctrl_reg_ioexp: regioexpgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x40000041
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x41
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17	0x140
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x140
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x140
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x140
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x140
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x140
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x40000041 /* RS232# */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x140
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x40000110 /* RS232# */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000110 /* RS422# */
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x40000110 /* RS485# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x140
+		>;
+	};
+
+	pinctrl_uart4_gpio: uart4gpiogrp {
+		fsl,pins = <
+
+			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* RS485# */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+	hysteresis = <2000>;
+	type = "critical";
+};
diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi
index 4162f41cff..2abcf1f03d 100644
--- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi
@@ -3,11 +3,9 @@
  * Copyright 2019 NXP
  */
 
-/ {
-	binman: binman {
-		multiple-images;
-	};
+#include "imx8mp-u-boot.dtsi"
 
+/ {
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog1>;
@@ -21,43 +19,6 @@
 	};
 };
 
-&{/soc@0} {
-	u-boot,dm-pre-reloc;
-	u-boot,dm-spl;
-};
-
-&clk {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&osc_32k {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&osc_24m {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&aips1 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&aips2 {
-	u-boot,dm-spl;
-};
-
-&aips3 {
-	u-boot,dm-spl;
-};
-
-&iomuxc {
-	u-boot,dm-spl;
-};
-
 &reg_usdhc2_vmmc {
 	u-boot,off-on-delay-us = <20000>;
 };
@@ -156,104 +117,4 @@
 	phy-reset-post-delay = <100>;
 };
 
-&binman {
-	 u-boot-spl-ddr {
-		filename = "u-boot-spl-ddr.bin";
-		pad-byte = <0xff>;
-		align-size = <4>;
-		align = <4>;
 
-		u-boot-spl {
-			align-end = <4>;
-		};
-
-		blob_1: blob-ext@1 {
-			filename = "lpddr4_pmu_train_1d_imem_202006.bin";
-			size = <0x8000>;
-		};
-
-		blob_2: blob-ext@2 {
-			filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
-			size = <0x4000>;
-		};
-
-		blob_3: blob-ext@3 {
-			filename = "lpddr4_pmu_train_2d_imem_202006.bin";
-			size = <0x8000>;
-		};
-
-		blob_4: blob-ext@4 {
-			filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
-			size = <0x4000>;
-		};
-	};
-
-
-       flash {
-		mkimage {
-			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x920000";
-
-			blob {
-				filename = "u-boot-spl-ddr.bin";
-			};
-		};
-	};
-
-	itb {
-		filename = "u-boot.itb";
-
-		fit {
-			description = "Configuration to load ATF before U-Boot";
-			#address-cells = <1>;
-			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-
-			images {
-				uboot {
-					description = "U-Boot (64-bit)";
-					type = "standalone";
-					arch = "arm64";
-					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
-
-					uboot_blob: blob-ext {
-						filename = "u-boot-nodtb.bin";
-					};
-				};
-
-				atf {
-					description = "ARM Trusted Firmware";
-					type = "firmware";
-					arch = "arm64";
-					compression = "none";
-					load = <0x970000>;
-					entry = <0x970000>;
-
-					atf_blob: blob-ext {
-						filename = "bl31.bin";
-					};
-				};
-
-				fdt {
-					description = "NAME";
-					type = "flat_dt";
-					compression = "none";
-
-					uboot_fdt_blob: blob-ext {
-						filename = "u-boot.dtb";
-					};
-				};
-			};
-
-			configurations {
-				default = "conf";
-
-				conf {
-					description = "NAME";
-					firmware = "uboot";
-					loadables = "atf";
-					fdt = "fdt";
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
index 20e7f63ff9..dbc48dfb48 100644
--- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
@@ -4,6 +4,8 @@
  * Author: Teresa Remmet <t.remmet@phytec.de>
  */
 
+#include "imx8mp-u-boot.dtsi"
+
 / {
 	wdt-reboot {
 		compatible = "wdt-reboot";
@@ -12,48 +14,11 @@
 	};
 };
 
-&{/soc@0} {
-	u-boot,dm-pre-reloc;
-	u-boot,dm-spl;
-};
-
-&clk {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&osc_32k {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&osc_24m {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&aips1 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&aips2 {
-	u-boot,dm-spl;
-};
-
-&aips3 {
-	u-boot,dm-spl;
-};
-
-&iomuxc {
-	u-boot,dm-spl;
-};
-
 &reg_usdhc2_vmmc {
 	u-boot,dm-spl;
 };
 
-&pinctrl_uart2 {
+&pinctrl_uart1 {
 	u-boot,dm-spl;
 };
 
@@ -69,6 +34,10 @@
 	u-boot,dm-spl;
 };
 
+&pinctrl_wdog {
+	u-boot,dm-spl;
+};
+
 &gpio1 {
 	u-boot,dm-spl;
 };
@@ -89,7 +58,7 @@
 	u-boot,dm-spl;
 };
 
-&uart2 {
+&uart1 {
 	u-boot,dm-spl;
 };
 
diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
index 0e1a6d9533..984a6b9ded 100644
--- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
@@ -16,7 +16,7 @@
 		     "phytec,imx8mp-phycore-som", "fsl,imx8mp";
 
 	chosen {
-		stdout-path = &uart2;
+		stdout-path = &uart1;
 	};
 
 	reg_usdhc2_vmmc: regulator-usdhc2 {
@@ -33,9 +33,33 @@
 	};
 };
 
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -71,9 +95,9 @@
 };
 
 /* debug console */
-&uart2 {
+&uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
@@ -90,6 +114,26 @@
 };
 
 &iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
@@ -110,10 +154,10 @@
 		>;
 	};
 
-	pinctrl_uart2: uart2grp {
+	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
-			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x49
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x49
 		>;
 	};
 
diff --git a/arch/arm/dts/imx8mp-phycore-som.dtsi b/arch/arm/dts/imx8mp-phycore-som.dtsi
index 44a8c2337c..f3965ec5b3 100644
--- a/arch/arm/dts/imx8mp-phycore-som.dtsi
+++ b/arch/arm/dts/imx8mp-phycore-som.dtsi
@@ -67,7 +67,7 @@
 
 &i2c1 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
new file mode 100644
index 0000000000..d61346da30
--- /dev/null
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&osc_32k {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem_202006.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem_202006.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
+			size = <0x4000>;
+		};
+	};
+
+	flash {
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x920000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x970000>;
+					entry = <0x970000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
index ecccfbb4f5..c2d51a46cb 100644
--- a/arch/arm/dts/imx8mp.dtsi
+++ b/arch/arm/dts/imx8mp.dtsi
@@ -18,6 +18,7 @@
 
 	aliases {
 		ethernet0 = &fec;
+		ethernet1 = &eqos;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -218,10 +219,12 @@
 	};
 
 	soc@0 {
-		compatible = "simple-bus";
+		compatible = "fsl,imx8mp-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x3e000000>;
+		nvmem-cells = <&imx8mp_uid>;
+		nvmem-cell-names = "soc_unique_id";
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
@@ -266,7 +269,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>;
 			};
 
 			gpio4: gpio@30230000 {
@@ -310,6 +313,22 @@
 				status = "disabled";
 			};
 
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
 			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx8mp-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -328,9 +347,17 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				imx8mp_uid: unique-id@420 {
+					reg = <0x8 0x8>;
+				};
+
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				eth_mac1: mac-address@90 {
+					reg = <0x90 6>;
+				};
 			};
 
 			anatop: anatop@30360000 {
@@ -762,13 +789,40 @@
 				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
 						  <&clk IMX8MP_CLK_ENET_TIMER>,
 						  <&clk IMX8MP_CLK_ENET_REF>,
-						  <&clk IMX8MP_CLK_ENET_TIMER>;
+						  <&clk IMX8MP_CLK_ENET_PHY_REF>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
 							 <&clk IMX8MP_SYS_PLL2_100M>,
-							 <&clk IMX8MP_SYS_PLL2_125M>;
-				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+							 <&clk IMX8MP_SYS_PLL2_125M>,
+							 <&clk IMX8MP_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				nvmem_macaddr_swap;
+				status = "disabled";
+			};
+
+			eqos: ethernet@30bf0000 {
+				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x30bf0000 0x10000>;
+				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "eth_wake_irq", "macirq";
+				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_QOS>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_QOS>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>;
+				intf_mode = <&gpr 0x4>;
 				status = "disabled";
 			};
 		};
@@ -788,5 +842,87 @@
 			reg = <0x3d800000 0x400000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mp-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb3_0: usb@32f10100 {
+			compatible = "fsl,imx8mp-dwc3";
+			reg = <0x32f10100 0x8>;
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_USB_ROOT>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+			ranges;
+			status = "disabled";
+
+			usb_dwc3_0: usb@38100000 {
+				compatible = "snps,dwc3";
+				reg = <0x38100000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+					 <&clk IMX8MP_CLK_USB_CORE_REF>,
+					 <&clk IMX8MP_CLK_USB_ROOT>;
+				clock-names = "bus_early", "ref", "suspend";
+				assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+				assigned-clock-rates = <500000000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy0>, <&usb3_phy0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis-u2-freeclk-exists-quirk;
+			};
+
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mp-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			#phy-cells = <0>;
+		};
+
+		usb3_1: usb@32f10108 {
+			compatible = "fsl,imx8mp-dwc3";
+			reg = <0x32f10108 0x8>;
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_USB_ROOT>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+			ranges;
+			status = "disabled";
+
+			usb_dwc3_1: usb@38200000 {
+				compatible = "snps,dwc3";
+				reg = <0x38200000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+					 <&clk IMX8MP_CLK_USB_CORE_REF>,
+					 <&clk IMX8MP_CLK_USB_ROOT>;
+				clock-names = "bus_early", "ref", "suspend";
+				assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+				assigned-clock-rates = <500000000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis-u2-freeclk-exists-quirk;
+			};
+		};
 	};
 };
diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi
index a841a023e8..a44f729d0e 100644
--- a/arch/arm/dts/imx8mq.dtsi
+++ b/arch/arm/dts/imx8mq.dtsi
@@ -39,6 +39,8 @@
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
+		usb0 = &usb_dwc3_0;
+		usb1 = &usb_dwc3_1;
 	};
 
 	ckil: clock-ckil {
diff --git a/arch/arm/include/asm/arch-imx8m/clock.h b/arch/arm/include/asm/arch-imx8m/clock.h
index 77d9428a18..c705dfdf46 100644
--- a/arch/arm/include/asm/arch-imx8m/clock.h
+++ b/arch/arm/include/asm/arch-imx8m/clock.h
@@ -257,6 +257,7 @@ u32 imx_get_uartclk(void);
 int clock_init(void);
 void init_clk_usdhc(u32 index);
 void init_uart_clk(u32 index);
+void init_usb_clk(void);
 void init_wdog_clk(void);
 unsigned int mxc_get_clock(enum mxc_clock clk);
 int clock_enable(enum clk_ccgr_index index, bool enable);
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 1e5fa1a75e..c49759af92 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -7,6 +7,7 @@
 #ifndef __SYS_PROTO_IMX6_
 #define __SYS_PROTO_IMX6_
 
+#include <asm/gpio.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <asm/arch/iomux.h>
 
@@ -18,7 +19,7 @@
 				   USBPHY_PWD_RXPWDRX))
 
 int imx6_pcie_toggle_power(void);
-int imx6_pcie_toggle_reset(void);
+int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high);
 
 enum ldo_reg {
 	LDO_ARM,
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 0669363c0f..ccaf106be5 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -127,6 +127,7 @@ config TARGET_PHYCORE_IMX8MM
 
 config TARGET_PHYCORE_IMX8MP
 	bool "PHYTEC PHYCORE i.MX8MP"
+	select BINMAN
 	select IMX8MP
         select SUPPORT_SPL
 	select IMX8M_LPDDR4
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/arch/arm/mach-imx/imx8m/clock_imx8mq.c
index 8fecc60ecb..60e2218a3c 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mq.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mq.c
@@ -400,6 +400,28 @@ void init_wdog_clk(void)
 	clock_enable(CCGR_WDOG3, 1);
 }
 
+void init_usb_clk(void)
+{
+	if (!is_usb_boot()) {
+		clock_enable(CCGR_USB_CTRL1, 0);
+		clock_enable(CCGR_USB_CTRL2, 0);
+		clock_enable(CCGR_USB_PHY1, 0);
+		clock_enable(CCGR_USB_PHY2, 0);
+		/* 500MHz */
+		clock_set_target_val(USB_BUS_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		/* 100MHz */
+		clock_set_target_val(USB_CORE_REF_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		/* 100MHz */
+		clock_set_target_val(USB_PHY_REF_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USB_CTRL1, 1);
+		clock_enable(CCGR_USB_CTRL2, 1);
+		clock_enable(CCGR_USB_PHY1, 1);
+		clock_enable(CCGR_USB_PHY2, 1);
+	}
+}
 
 void init_nand_clk(void)
 {
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 0c44022a6d..f2ddc834d4 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -296,6 +296,20 @@ phys_size_t get_effective_memsize(void)
 #endif
 }
 
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	/*
+	 * Some IPs have their accessible address space restricted by
+	 * the interconnect. Let's make sure U-Boot only ever uses the
+	 * space below the 4G address boundary (which is 3GiB big),
+	 * even when the effective available memory is bigger.
+	 */
+	if (PHYS_SDRAM + gd->ram_size > 0x80000000)
+		return 0x80000000;
+
+	return PHYS_SDRAM + gd->ram_size;
+}
+
 static u32 get_cpu_variant_type(u32 type)
 {
 	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
@@ -571,6 +585,67 @@ enum boot_device get_boot_device(void)
 }
 #endif
 
+#if defined(CONFIG_IMX8M)
+#include <spl.h>
+int spl_mmc_emmc_boot_partition(struct mmc *mmc)
+{
+	u32 *rom_log_addr = (u32 *)0x9e0;
+	u32 *rom_log;
+	u8 event_id;
+	int i, part;
+
+	part = default_spl_mmc_emmc_boot_partition(mmc);
+
+	/* If the ROM event log pointer is not valid. */
+	if (*rom_log_addr < 0x900000 || *rom_log_addr >= 0xb00000 ||
+	    *rom_log_addr & 0x3)
+		return part;
+
+	/* Parse the ROM event ID version 2 log */
+	rom_log = (u32 *)(uintptr_t)(*rom_log_addr);
+	for (i = 0; i < 128; i++) {
+		event_id = rom_log[i] >> 24;
+		switch (event_id) {
+		case 0x00: /* End of list */
+			return part;
+		/* Log entries with 1 parameter, skip 1 */
+		case 0x80: /* Start to perform the device initialization */
+		case 0x81: /* The boot device initialization completes */
+		case 0x8f: /* The boot device initialization fails */
+		case 0x90: /* Start to read data from boot device */
+		case 0x91: /* Reading data from boot device completes */
+		case 0x9f: /* Reading data from boot device fails */
+			i += 1;
+			continue;
+		/* Log entries with 2 parameters, skip 2 */
+		case 0xa0: /* Image authentication result */
+		case 0xc0: /* Jump to the boot image soon */
+			i += 2;
+			continue;
+		/* Boot from the secondary boot image */
+		case 0x51:
+			/*
+			 * Swap the eMMC boot partitions in case there was a
+			 * fallback event (i.e. primary image was corrupted
+			 * and that corruption was recognized by the BootROM),
+			 * so the SPL loads the rest of the U-Boot from the
+			 * correct eMMC boot partition, since the BootROM
+			 * leaves the boot partition set to the corrupted one.
+			 */
+			if (part == 1)
+				part = 2;
+			else if (part == 2)
+				part = 1;
+			continue;
+		default:
+			continue;
+		}
+	}
+
+	return part;
+}
+#endif
+
 bool is_usb_boot(void)
 {
 	return get_boot_device() == USB_BOOT;
diff --git a/arch/arm/mach-imx/mmdc_size.c b/arch/arm/mach-imx/mmdc_size.c
index 1a094726aa..41a5af6bd3 100644
--- a/arch/arm/mach-imx/mmdc_size.c
+++ b/arch/arm/mach-imx/mmdc_size.c
@@ -24,11 +24,11 @@ struct esd_mmdc_regs {
 	u32 misc;
 };
 
-#define ESD_MMDC_CTL_GET_ROW(mdctl)	((ctl >> 24) & 7)
-#define ESD_MMDC_CTL_GET_COLUMN(mdctl)	((ctl >> 20) & 7)
-#define ESD_MMDC_CTL_GET_WIDTH(mdctl)	((ctl >> 16) & 3)
-#define ESD_MMDC_CTL_GET_CS1(mdctl)	((ctl >> 30) & 1)
-#define ESD_MMDC_MISC_GET_BANK(mdmisc)	((misc >> 5) & 1)
+#define ESD_MMDC_CTL_GET_ROW(mdctl)    ((mdctl >> 24) & 7)
+#define ESD_MMDC_CTL_GET_COLUMN(mdctl) ((mdctl >> 20) & 7)
+#define ESD_MMDC_CTL_GET_WIDTH(mdctl)  ((mdctl >> 16) & 3)
+#define ESD_MMDC_CTL_GET_CS1(mdctl)    ((mdctl >> 30) & 1)
+#define ESD_MMDC_MISC_GET_BANK(mdmisc) ((mdmisc >> 5) & 1)
 
 /*
  * imx_ddr_size - return size in bytes of DRAM according MMDC config