Merge tag 'xilinx-for-v2022.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.07-rc1

microblaze:
- Add support for reserved memory

xilinx:
- Update FRU code with MAC reading

zynqmp:
- Remove double AMS setting
- DT updates (mostly for SOMs)
- Add support for zcu106 rev 1.0

zynq:
- Update nand binding

nand:
- Aligned zynq_nand to upstream DT binding

net:
- Add support for ethernet-phy-id

mmc:
- Workaround CD in zynq_sdhci driver also for ZynqMP
- Add support for dynamic/run-time SD config for SOMs

gpio:
- Add driver for slg7xl45106

firmware:
- Add support for dynamic SD config

power-domain:
- Update zynqmp driver with the latest firmware

video:
- Add skeleton driver for DP and DPDMA

i2c:
- Fix i2c to work with QEMU

pinctrl:
- Add driver for zynqmp pinctrl driver

11 files changed, 115 insertions, 44 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 56ed7b67b7..770a51955e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -349,6 +349,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-zcu104-revA.dtb			\
 	zynqmp-zcu104-revC.dtb			\
 	zynqmp-zcu106-revA.dtb			\
+	zynqmp-zcu106-rev1.0.dtb		\
 	zynqmp-zcu111-revA.dtb			\
 	zynqmp-zcu1275-revA.dtb			\
 	zynqmp-zcu1275-revB.dtb			\
diff --git a/arch/arm/dts/bitmain-antminer-s9.dts b/arch/arm/dts/bitmain-antminer-s9.dts
index 0694350555..408862bef0 100644
--- a/arch/arm/dts/bitmain-antminer-s9.dts
+++ b/arch/arm/dts/bitmain-antminer-s9.dts
@@ -50,7 +50,7 @@
 	ps-clk-frequency = <33333333>;
 };
 
-&nand0 {
+&nfc0 {
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 4dda753671..9495911397 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -246,33 +246,6 @@
 			#size-cells = <0>;
 		};
 
-		smcc: memory-controller@e000e000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			clock-names = "memclk", "apb_pclk";
-			clocks = <&clkc 11>, <&clkc 44>;
-			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-			interrupt-parent = <&intc>;
-			interrupts = <0 18 4>;
-			ranges ;
-			reg = <0xe000e000 0x1000>;
-			nand0: flash@e1000000 {
-				status = "disabled";
-				compatible = "arm,pl353-nand-r2p1";
-				reg = <0xe1000000 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-			nor0: flash@e2000000 {
-				status = "disabled";
-				compatible = "cfi-flash";
-				reg = <0xe2000000 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-		};
-
 		gem0: ethernet@e000b000 {
 			compatible = "cdns,zynq-gem", "cdns,gem";
 			reg = <0xe000b000 0x1000>;
@@ -295,6 +268,36 @@
 			#size-cells = <0>;
 		};
 
+		smcc: memory-controller@e000e000 {
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			reg = <0xe000e000 0x0001000>;
+			status = "disabled";
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+				  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+				  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 18 4>;
+
+			nfc0: nand-controller@0,0 {
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0 0 0x1000000>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+			nor0: flash@1,0 {
+				status = "disabled";
+				compatible = "cfi-flash";
+				reg = <1 0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
 		sdhci0: mmc@e0100000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index b6e3e255d7..0ef2ae1744 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -47,7 +47,7 @@
 	};
 };
 
-&nand0 {
+&nfc0 {
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index 664e65896d..7b09d75151 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -215,10 +215,12 @@
 
 &sdhci0 {
 	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO0_REF>;
 };
 
 &sdhci1 {
 	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO1_REF>;
 };
 
 &spi0 {
@@ -255,10 +257,12 @@
 
 &usb0 {
 	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+	assigned-clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
 };
 
 &usb1 {
 	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+	assigned-clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
 };
 
 &watchdog0 {
@@ -279,10 +283,14 @@
 
 &zynqmp_dpdma {
 	clocks = <&zynqmp_clk DPDMA_REF>;
+	assigned-clocks = <&zynqmp_clk DPDMA_REF>; /* apll */
 };
 
 &zynqmp_dpsub {
 	clocks = <&zynqmp_clk TOPSW_LSBUS>,
 		 <&zynqmp_clk DP_AUDIO_REF>,
 		 <&zynqmp_clk DP_VIDEO_REF>;
+	assigned-clocks = <&zynqmp_clk DP_STC_REF>,
+			  <&zynqmp_clk DP_AUDIO_REF>,
+			  <&zynqmp_clk DP_VIDEO_REF>;  /* rpll, rpll, vpll */
 };
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index 5d21795de9..b3fe42faee 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -511,10 +511,10 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
-			si570_hsdp: clock-generator@5d { /* u5 */
+			si570_hsdp: clock-generator@60 { /* u5 */
 				#clock-cells = <0>;
 				compatible = "silabs,si570";
-				reg = <0x5d>;	/* 570JAC000900DG */
+				reg = <0x60>;	/* 570JAC000900DG */
 				temperature-stability = <50>;
 				factory-fout = <156250000>;
 				clock-frequency = <156250000>;
@@ -528,10 +528,10 @@
 			/* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
 			/* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */
 			/* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
-			clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 - pcie clocking 3 */
+			clock_8t49n287: clock-generator@60 { /* u39 8T49N240 - pcie clocking 3 */
 				#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
 				compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
-				reg = <0xd8>;
+				reg = <0x60>;
 				/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
 				/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
 
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index 22602d8c33..85994bef7c 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -115,10 +115,12 @@
 	status = "disabled";
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
 };
 
 &zynqmp_dpdma {
 	status = "okay";
+	assigned-clock-rates = <600000000>;
 };
 
 &usb0 {
@@ -129,7 +131,7 @@
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
 	usbhub: usb5744 { /* u43 */
 		compatible = "microchip,usb5744";
-		reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -152,6 +154,8 @@
 	no-1-8-v;
 	disable-wp;
 	xlnx,mio-bank = <1>;
+	assigned-clock-rates = <187498123>;
+	bus-width = <8>;
 };
 
 &gem3 { /* required by spec */
@@ -164,16 +168,18 @@
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <2>;
 
 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index df054e152a..b81c2e6b75 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -36,11 +36,7 @@
 		label = "ina260-u14";
 		reg = <0x40>;
 	};
-	usbhub: usb5744@2d { /* u43 */
-		compatible = "microchip,usb5744";
-		reg = <0x2d>;
-		reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-	};
+	/* u43 - 0x2d - USB hub */
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -96,13 +92,15 @@
 };
 
 &zynqmp_dpsub {
-	status = "disabled";
+	status = "okay";
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
 };
 
 &zynqmp_dpdma {
 	status = "okay";
+	assigned-clock-rates = <600000000>;
 };
 
 &usb0 {
@@ -111,6 +109,14 @@
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+	assigned-clock-rates = <250000000>, <20000000>;
+
+	usb5744: usb-hub { /* u43 */
+		status = "okay";
+		compatible = "microchip,usb5744";
+		i2c-bus = <&i2c1>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &dwc3_0 {
@@ -135,6 +141,8 @@
 	clk-phase-sd-hs = <126>, <60>;
 	clk-phase-uhs-sdr25 = <120>, <60>;
 	clk-phase-uhs-ddr50 = <126>, <48>;
+	assigned-clock-rates = <187498123>;
+	bus-width = <8>;
 };
 
 &gem3 { /* required by spec */
@@ -147,16 +155,18 @@
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <2>;
 
 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts
index 5f55df28f3..14ab31685d 100644
--- a/arch/arm/dts/zynqmp-sm-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -14,6 +14,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 
 / {
 	model = "ZynqMP SM-K26 Rev1/B/A";
@@ -92,6 +93,23 @@
 	status = "okay";
 };
 
+&pinctrl0 {
+	status = "okay";
+	pinctrl_sdhci0_default: sdhci0-default {
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+	};
+};
+
 &qspi { /* MIO 0-5 - U143 */
 	status = "okay";
 	flash@0 { /* MT25QU512A */
@@ -185,10 +203,13 @@
 
 &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 	non-removable;
 	disable-wp;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
+	assigned-clock-rates = <187498123>;
 };
 
 &spi1 { /* MIO6, 9-11 */
@@ -316,3 +337,7 @@
 &ams_pl {
 	status = "okay";
 };
+
+&zynqmp_dpsub {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zcu106-rev1.0.dts b/arch/arm/dts/zynqmp-zcu106-rev1.0.dts
new file mode 100644
index 0000000000..f43c477a17
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu106-rev1.0.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU106 Rev1.0
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include "zynqmp-zcu106-revA.dts"
+
+/ {
+	model = "ZynqMP ZCU106 Rev1.0";
+	compatible = "xlnx,zynqmp-zcu106-rev1.0", "xlnx,zynqmp-zcu106-revA",
+		     "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
+};
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index 3107748d3b..050a8b4076 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -23,6 +23,8 @@
 #endif
 #include <asm/ptrace.h>
 
+#define MMU_SECTION_SIZE	(1 * 1024 * 1024)
+
 #define prepare_to_switch()	do { } while (0)
 
 /*