diff options
| author | Dennis Gilmore <dennis@ausil.us> | 2020-06-27 23:00:16 +0300 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2020-07-09 07:50:05 +0300 |
| commit | 34fb7df42e32dcb1b0191d7ff44b917ee0a9089e (patch) | |
| tree | ffdd444d332cd4f44bad5b8456bfc8f02374b7b3 /arch | |
| parent | 4182232158bfff7363fa0b4eade360cf50551cb9 (diff) | |
| download | u-boot-34fb7df42e32dcb1b0191d7ff44b917ee0a9089e.tar.xz | |
arm: mvebu: helios4: sync helios4 config to clearfog and dts to kernel
The helios4 is built on the same microsom as the clearfog, by syncing the config
we enable the same featureset that exists in the som on the helios4. The current
config does not boot as some of the clearfog changes needed to be made on the
helios4 also, generally speaking most changes for the clearfog should also be
made on the helios4.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
Reviewed-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/armada-388-helios4-u-boot.dtsi | 15 | ||||
| -rw-r--r-- | arch/arm/dts/armada-388-helios4.dts | 16 |
2 files changed, 23 insertions, 8 deletions
diff --git a/arch/arm/dts/armada-388-helios4-u-boot.dtsi b/arch/arm/dts/armada-388-helios4-u-boot.dtsi index f0da9f42de..0753889854 100644 --- a/arch/arm/dts/armada-388-helios4-u-boot.dtsi +++ b/arch/arm/dts/armada-388-helios4-u-boot.dtsi @@ -14,6 +14,9 @@ &spi1 { u-boot,dm-spl; + spi-flash@0 { + u-boot,dm-spl; + }; }; &w25q32 { @@ -21,6 +24,18 @@ u-boot,dm-spl; }; +&gpio0 { + u-boot,dm-spl; +}; + +&ahci0 { + u-boot,dm-spl; +}; + +&ahci1 { + u-boot,dm-spl; +}; + &sdhci { u-boot,dm-spl; }; diff --git a/arch/arm/dts/armada-388-helios4.dts b/arch/arm/dts/armada-388-helios4.dts index a154e0f4f4..fb49df2a3b 100644 --- a/arch/arm/dts/armada-388-helios4.dts +++ b/arch/arm/dts/armada-388-helios4.dts @@ -140,11 +140,6 @@ soc { internal-regs { i2c@11000 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - /* * PCA9655 GPIO expander, up to 1MHz clock. * 0-Board Revision bit 0 # @@ -187,8 +182,7 @@ gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; - line-name = - "usb-overcurrent-status"; + line-name = "usb-overcurrent-status"; }; }; @@ -248,7 +242,7 @@ bus-width = <4>; cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; no-1-8-v; - pinctrl-0 = <µsom_sdhci_pins + pinctrl-0 = <&helios_sdhci_pins &helios_sdhci_cd_pins>; pinctrl-names = "default"; status = "okay"; @@ -286,6 +280,12 @@ marvell,pins = "mpp20"; marvell,function = "gpio"; }; + helios_sdhci_pins: helios-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; helios_led_pins: helios-led-pins { marvell,pins = "mpp24", "mpp25", "mpp49", "mpp50", |