diff options
author | Andre Przywara <andre.przywara@arm.com> | 2023-01-12 14:18:05 +0300 |
---|---|---|
committer | Andre Przywara <andre.przywara@arm.com> | 2023-03-06 02:33:13 +0300 |
commit | 6621cc85f72e478c67801fb4a02fda73a736eebc (patch) | |
tree | d5096882536cbc7686e3d21d4116c34d2a51ca77 /arch | |
parent | 33fb2d130e28982b488c2a54978031835ed2aa71 (diff) | |
download | u-boot-6621cc85f72e478c67801fb4a02fda73a736eebc.tar.xz |
sunxi: dts: arm: update devicetree files from Linux v6.2-rc2
Sync the devicetree files from the Linux kernel repo, v6.2-rc2.
This is covering the 32-bit SoCs, from arch/arm/boot/dts.
This enables some new devices for the F1C100s family, though this is of
little relevance to U-Boot itself.
The H3 gains the "phys" property for the first USB controller, which
prevents an error message when U-Boot's USB stack comes up, and allows
using this port in host mode.
As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/dts/suniv-f1c100s.dtsi | 70 | ||||
-rw-r--r-- | arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 14 | ||||
-rw-r--r-- | arch/arm/dts/sunxi-h3-h5.dtsi | 4 |
3 files changed, 81 insertions, 7 deletions
diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi index 0edc172440..9455d27e51 100644 --- a/arch/arm/dts/suniv-f1c100s.dtsi +++ b/arch/arm/dts/suniv-f1c100s.dtsi @@ -166,6 +166,12 @@ drive-strength = <30>; }; + /omit-if-no-ref/ + i2c0_pd_pins: i2c0-pd-pins { + pins = "PD0", "PD12"; + function = "i2c0"; + }; + spi0_pc_pins: spi0-pc-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; @@ -177,6 +183,42 @@ }; }; + i2c0: i2c@1c27000 { + compatible = "allwinner,suniv-f1c100s-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c27000 0x400>; + interrupts = <7>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1c27400 { + compatible = "allwinner,suniv-f1c100s-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c27400 0x400>; + interrupts = <8>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1c27800 { + compatible = "allwinner,suniv-f1c100s-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c27800 0x400>; + interrupts = <9>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; @@ -192,6 +234,34 @@ clocks = <&osc32k>; }; + pwm: pwm@1c21000 { + compatible = "allwinner,suniv-f1c100s-pwm", + "allwinner,sun7i-a20-pwm"; + reg = <0x01c21000 0x400>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@1c22c00 { + compatible = "allwinner,suniv-f1c100s-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c22c00 0x400>; + clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&ccu RST_BUS_IR>; + interrupts = <6>; + status = "disabled"; + }; + + lradc: lradc@1c23400 { + compatible = "allwinner,suniv-f1c100s-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c23400 0x400>; + interrupts = <22>; + status = "disabled"; + }; + uart0: serial@1c25000 { compatible = "snps,dw-apb-uart"; reg = <0x01c25000 0x400>; diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi index e899d14f38..1d1d127cf3 100644 --- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi @@ -89,13 +89,13 @@ }; reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi index 6439141860..fc1af9b608 100644 --- a/arch/arm/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/dts/sunxi-h3-h5.dtsi @@ -302,6 +302,8 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -312,6 +314,8 @@ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; |