board/km: remove kirkwood boards

These boards are out of maintenance and can be removed.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Stefan Roese <sr@denx.de>

3 files changed, 0 insertions, 102 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 71e9bd4da3..9374b3cdab 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -58,7 +58,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
 	kirkwood-ib62x0.dtb \
 	kirkwood-iconnect.dtb \
 	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-net2big.dtb \
diff --git a/arch/arm/dts/kirkwood-km_common.dtsi b/arch/arm/dts/kirkwood-km_common.dtsi
deleted file mode 100644
index 9d0fc51c2d..0000000000
--- a/arch/arm/dts/kirkwood-km_common.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
-			pinctrl-names = "default";
-
-			pmx_i2c_gpio_sda: pmx-gpio-sda {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_i2c_gpio_scl: pmx-gpio-scl {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-			clock-frequency = <200000000>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <25>;
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/dts/kirkwood-km_kirkwood.dts b/arch/arm/dts/kirkwood-km_kirkwood.dts
deleted file mode 100644
index b2c0209f5d..0000000000
--- a/arch/arm/dts/kirkwood-km_kirkwood.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Reference Design";
-	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	aliases {
-		spi0 = &spi0;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p80", "jedec,spi-nor", "spi-flash";
-		reg = <0>;
-		spi-max-frequency = <33000000>;
-		mode = <3>;
-
-		partition@uboot {
-			reg = <0x000000 0x0c0000>;
-			label = "uboot";
-		};
-	};
-};